Tmux issue

Hi everyone, have done a bit of searching but only found one result that really gave me any hope and that didn't work at all (http://m.lieba.ch/2010/08/07/using-tmux … x-xen.html), so I figured I'd ask here.
I recently rolled out Arch on my VPS, have everything up to date and installed tmux. I can run tmux, but I can't create any new windows with Ctrl-c. If I detach and try to create another instance of tmux, that also fails. Both times I get the following message:
Create window failed: Permission denied
I tried the method shown on that web page but didn't get any luck and can't seem to figure out the problem. Does anybody have any ideas/have they experienced this before? It's odd, but if I use screen, I can create as many new windows as I want. Not sure if that helps narrow it down, I have to say I'm a little lost on this one.
Thanks,
Joel.
Edit: Just killed my instance of tmux, logged out and logged back in, and I can now create two additional windows but again, attempting to do more than that results in the above message.
Last edited by JHeaton (2010-09-14 17:22:42)

I'm having the same problem on my Linode VPS running arch (64).
I've found that if I run tmux as root, I do not have this problem. This leads me to believe that it's a permissions issue, but why other arch users are not experiencing it... I have no idea.
My system is extremely vanilla, I just rolled it out a couple of weeks ago myself and haven't done much to it.
I also found that if the user running tmux had a screen session open as well, it decreased the number of windows I could open without encountering this error. Closing screen typically allows me to open one additional window. I thought that maybe screen was eating up terminals, but I really don' t think this is the case.
I haven't even been able to find reference to this message anywhere else, so it may be specific to arch.
Last edited by muiro (2010-09-22 16:09:32)

Similar Messages

  • No cursor in emacs with tmux

    I'm running emacs in tmux and the cursor doesn't seem to appear. When I run emacs outside of tmux everything is fine. I'm not sure where to start debugging this or what could be relevant to this problem. It was working before I upgraded to tmux-2.0.

    I still don't get why it has to be a login shell. Are you using a DM that breaks that functionality?
    IMO, this is why you are experiencing term-related issues: your setup is unnecessarily convoluted. Try starting from a simple interactive shell, see if it works there, and then add the bits and pieces back until it breaks.
    Is there a better way to set this up? Probably. I guess it depends on what you are trying to do; only have a single tmux session?

  • [solved] compiz-core upgrade issue: missing /usr/lib/compiz/libcore.so

    After upgrading from compiz-core 0.8.8-3 to 0.8.8-4, but it's persisting even downgrading I got a segfault for the missing file.
    Running
    LANG=C xinit >xinit.log 2>xinit.log
    with the following .xinitrc
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    setxkbmap it -option compose:rctrl -option terminate:ctrl_alt_bksp
    urxvtd -f -o
    fbpanel &
    gtk-redshift &
    compiz --debug --replace ccp --indirect-rendering
    echo "ARGH -> $?"
    I got this output in xinit.log
    ARGH -> 139
    rver 1.13.0
    Release Date: 2012-09-05
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.6.0-1-ARCH x86_64.
    Current Operating System: Linux archmini 3.6.2-1-ARCH #1 SMP PREEMPT Fri Oct 12 23:58:58 CEST 2012#
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7342087f-b1bb-4133-8b50-d25ff902fcab#
    Build Date: 05 October 2012 01:57:18PM
    Current version of pixman: 0.26.2
    >...Before reporting problems, check http://wiki.x.org
    >...to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    >...(++) from command line, (!!) notice, (II) informational,
    >...(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 15 22:20:21 2012
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    rxvt-unicode daemon listening on /home/milky/.urxvt/urxvtd-archmini.
    compiz (core) - Debug: Could not stat() file /home/milky/.compiz/plugins/libcore.so : No such file#
    compiz (core) - Debug: Could not stat() file /usr/lib/compiz/libcore.so : No such file or directory
    /home/milky/.xinitrc: line 19: 858 Segmentation fault compiz --debug --replace ccp --indire#
    xinit: connection to X server lost
    ^M
    waiting for X server to shut down urxvt: X connection to ':0' broken, unable to recover, exiting.
    Server terminated successfully (0). Closing log file.
    Relevant pacman.log:
    [2012-10-15 21:30] Running 'pacman -Syu'
    [2012-10-15 21:30] synchronizing package lists
    [2012-10-15 21:30] starting full system upgrade
    [2012-10-15 21:40] upgraded acpid (2.0.17-1 -> 2.0.17-3)
    [2012-10-15 21:40] upgraded cabal-install (1.16.0-1 -> 1.16.0-2)
    [2012-10-15 21:40] upgraded chromium (22.0.1229.92-1 -> 22.0.1229.94-1)
    [2012-10-15 21:40] upgraded libglapi (8.0.4-3 -> 9.0-1)
    [2012-10-15 21:40] upgraded libgl (8.0.4-3 -> 9.0-1)
    [2012-10-15 21:40] installed glu (9.0.0-1)
    [2012-10-15 21:40] upgraded compiz-core (0.8.8-3 -> 0.8.8-4)
    [2012-10-15 21:40] upgraded curl (7.27.0-1 -> 7.28.0-1)
    [2012-10-15 21:40] upgraded dnsutils (9.9.1.P3-1 -> 9.9.2-1)
    [2012-10-15 21:40] upgraded erlang (R15B01-1 -> R15B01-2)
    [2012-10-15 21:40] upgraded firefox (15.0.1-1 -> 16.0.1-1)
    [2012-10-15 21:40] upgraded firefox-i18n-it (15.0.1-1 -> 16.0.1-1)
    [2012-10-15 21:40] upgraded freeglut (2.8.0-1 -> 2.8.0-2)
    [2012-10-15 21:40] upgraded gegl (0.2.0-3 -> 0.2.0-4)
    [2012-10-15 21:40] upgraded git (1.7.12.2-1 -> 1.7.12.3-1)
    [2012-10-15 21:40] upgraded gnutls (3.1.2-1 -> 3.1.3-1)
    [2012-10-15 21:40] upgraded gparted (0.13.1-1 -> 0.14.0-1)
    [2012-10-15 21:40] upgraded hwids (20120922-1 -> 20121012-1)
    [2012-10-15 21:40] upgraded intel-dri (8.0.4-3 -> 9.0-1)
    [2012-10-15 21:40] upgraded jasper (1.900.1-7 -> 1.900.1-8)
    [2012-10-15 21:40] upgraded khrplatform-devel (8.0.4-3 -> 9.0-1)
    [2012-10-15 21:40] upgraded pam (1.1.5-4 -> 1.1.6-1)
    [2012-10-15 21:40] upgraded util-linux (2.22-7 -> 2.22.1-1)
    [2012-10-15 21:40] upgraded systemd (194-1 -> 194-3)
    [2012-10-15 21:40] upgraded libgbm (8.0.4-3 -> 9.0-1)
    [2012-10-15 21:40] upgraded libegl (8.0.4-3 -> 9.0-1)
    [2012-10-15 21:40] upgraded libldap (2.4.32-1 -> 2.4.33-1)
    [2012-10-15 21:40] >>> Updating module dependencies. Please wait ...
    [2012-10-15 21:40] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-10-15 21:40] ==> Building image from preset: 'default'
    [2012-10-15 21:40] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-10-15 21:40] ==> Starting build: 3.6.2-1-ARCH
    [2012-10-15 21:40] -> Running build hook: [base]
    [2012-10-15 21:40] -> Running build hook: [udev]
    [2012-10-15 21:40] -> Running build hook: [autodetect]
    [2012-10-15 21:40] -> Running build hook: [pata]
    [2012-10-15 21:40] -> Running build hook: [scsi]
    [2012-10-15 21:40] -> Running build hook: [sata]
    [2012-10-15 21:40] -> Running build hook: [filesystems]
    [2012-10-15 21:40] -> Running build hook: [usbinput]
    [2012-10-15 21:40] -> Running build hook: [fsck]
    [2012-10-15 21:40] ==> Generating module dependencies
    [2012-10-15 21:40] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-10-15 21:40] ==> Image generation successful
    [2012-10-15 21:40] ==> Building image from preset: 'fallback'
    [2012-10-15 21:40] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-10-15 21:40] ==> Starting build: 3.6.2-1-ARCH
    [2012-10-15 21:40] -> Running build hook: [base]
    [2012-10-15 21:40] -> Running build hook: [udev]
    [2012-10-15 21:40] -> Running build hook: [pata]
    [2012-10-15 21:40] -> Running build hook: [scsi]
    [2012-10-15 21:40] -> Running build hook: [sata]
    [2012-10-15 21:40] -> Running build hook: [filesystems]
    [2012-10-15 21:40] -> Running build hook: [usbinput]
    [2012-10-15 21:40] -> Running build hook: [fsck]
    [2012-10-15 21:40] ==> Generating module dependencies
    [2012-10-15 21:40] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-10-15 21:40] ==> Image generation successful
    [2012-10-15 21:40] upgraded linux (3.5.6-1 -> 3.6.2-1)
    [2012-10-15 21:40] upgraded linux-headers (3.5.6-1 -> 3.6.2-1)
    [2012-10-15 21:40] upgraded lirc-utils (1:0.9.0-30 -> 1:0.9.0-31)
    [2012-10-15 21:40] upgraded mesa (8.0.4-3 -> 9.0-1)
    [2012-10-15 21:40] upgraded mtdev (1.1.2-1 -> 1.1.3-1)
    [2012-10-15 21:40] upgraded nodejs (0.8.11-1 -> 0.8.12-1)
    [2012-10-15 21:40] upgraded subversion (1.7.6-1 -> 1.7.7-1)
    [2012-10-15 21:40] upgraded sysvinit-tools (2.88-8 -> 2.88-9)
    [2012-10-15 21:40] upgraded systemd-sysvcompat (194-1 -> 194-3)
    [2012-10-15 21:40] upgraded thunderbird (15.0.1-1 -> 16.0.1-1)
    [2012-10-15 21:40] upgraded tmux (1.6-2 -> 1.7-1)
    [2012-10-15 21:40] upgraded wpa_supplicant (1.0-1 -> 1.0-2)
    [2012-10-15 21:40] upgraded xf86-input-evdev (2.7.3-1 -> 2.7.3-2)
    [2012-10-15 21:40] upgraded xf86-video-intel (2.20.9-1 -> 2.20.9-2)
    [2012-10-15 21:40] upgraded xorg-server-common (1.12.4-1 -> 1.13.0-2)
    [2012-10-15 21:40] upgraded xorg-server (1.12.4-1 -> 1.13.0-2)
    [2012-10-15 21:40] upgraded youtube-dl (2012.09.27-1 -> 2012.10.09-1)
    Anyone can help me tracing in which package the missing file is located (if it's not in compiz-core)?
    Last edited by dexgeh (2012-10-16 17:58:39)

    I managed to solve the issue commenting the --indirect-rendering flag and installing and launching driconf to create a default ~/.drirc file.
    I just noticed that in the same upgrade I got intel-dri from 8.x to 9.x version, maybe it's related.
    Launching a terminal in .xinitrc and manually launching
    LIBGL_DEBUG=verbose compiz --debug --replace ccp
    show me a lot of errors, but it's working, and I don't need anymore the --indirect-rendering flag (in the past I put that flag in the command because of the bad performance that compiz had without).

  • [SOLVED] rxvt-unicode 9.17 + tmux = visual artifacts on resize

    Getting visual artifacts with the latest urxvt update.
    Thinking possibly an upstream issue, but would like confirmation first.
    Using dwm 6.0 with resizehints = False, if that matters.
    Can anyone reproduce and/or recommend a fix?
    Reproduce:
    - Run tmux in rxvt-unicode 9.17-1
    - Fill terminal with text, e.g. `ls -la`
    - Resize window
    Expected:
    Actual:
    Observation:
    If affected window is placed behind another window (e.g. by changing tags in dwm, or by dragging another window over it), the artifacts disappear.
    Edit: Solved
    Temp fix:
    Downgrading to rxvt-unicode 9.16.
    bangkok_manouel wrote:revert patch of guilty commit: https://gist.github.com/anonymous/5180682
    Last edited by w0ng (2013-03-20 20:56:11)

    I'm also encountering this issue after upgrading rxvt-unicode to 9.17. I'm using xmonad w/ an accordion layout so the instance of urxvt in which tmux is running is resized on focus resulting in the tmux status line not being removed from the position it was at prior to the resize. I can reproduce the problem while enlarging a floating urxvt+tmux window as well.
    The problem doesn't exist after downgrading to rxvt-unicode 9.16.

  • Synchronizing persistent tmux loginctl session ID with new session

    Hey all. Does anyone else have the issue with a persistent tmux session losing it's 'active' session status with loginctl after restarting the window manager (monsterwm in this case, logging in automatically on VT1 per the wiki)? This causes issues with udisks mounting priviliges. I'd think it'd cause issues with pulseaudio but it doesn't (and I don't understand why).
    So, to reproduce:
    1. Fresh reboot and login
    2. Open terminal. $XDG_SESSION_ID will be 1
    3. Open tmux instance. $XDG_SESSION_ID will be 1
    4. Restart the window manager
    5. Open terminal. $XDG_SESSION_ID = 3. loginctl session-status active=yes
    6. Reattach tmux session. XDG_SESSION_ID =1. loginctl session-status active=no
    Is there some easy way to keep these synchronized so I don't have permissions issues?
    Thanks!
    Scott

    No, it has nothing to do with host names, CNAME, DNS or anything.
    The session ID is sent to the server from the browser in either a cookie header or as part of the "extra info" part of a URL with the request. If there is no session ID in either place, the server creates a new session. If there is a session ID, then it gets the session object (if it's not expired). Then it sends the session ID back to the browser with the response to that request (either as a cookie or encoded into the URLs in the page, which you have to do explicitly do for each URL). Click on a link, then the process starts again. The first time you go to a site, you have no session ID. The server just makes a new one.
    The only thing that domain names have any affect on is cookies. Cuz cookies are name/value data associated with a domain name of the server (amongst other things). The browser, for security reasons, only sends cookies in requests to servers that set the cookie in the first place. The server can't get cookies that it didn't set.
    So if you have a server running on your local machine, you can access that server in 3 ways:
    1) localhost
    2) network name
    3) domain name
    The browser can know quite easily that 1 and 2 are the same thing, and send cookies for either interchangably (not that it has to, but it seems you are seeing this happen, so...). But the browser will probably not make any assumption about 3's relation to 1 or 2. The association is generally to domain name, not necessarily IP address.
    And it's really a moot point anyway. You should not typically be accessing a server from those 3 different means within the same session. Someone connecting to your server isn't going to use anything but #3 anyway, the other 2 (definitely #1 and #2 only works on the same LAN) wouldn't make much sense. So there's not going to be this issue at all. The session ID itself has no relation whatsoever to a client's domain name.

  • Tmux: show window size in session list; don't resize when attaching

    Hi there!
    I have two questions related to the same problem in tmux. The problem is that when you attach (by accident) to a session which has been opened on a larger screen, it is resized. This changes the sizes of the panels on the original, large screen, as well as the relative sizes of vim panels, which is really annying. This could be prevented, for instance, if I knew the size of the session in advance, so I could avoid attaching to it. I see multiple potential solutions/workaround for this, though, hence the multiple questions (but google hasn't been kind enough to help me).
    In the first scenario, I want to change to another session using the session list (<Ctrl-b><s>), but haven't assigned any meaningful names to the sessions, so I have no idea which session is the one opened on the larger screen.
    [1] Is there a way to display the current screen size of each session in the session list?
    In the second scenario, I attach to a tmux server without attaching to a specific session (because I haven't assigned any names, or don't recall them). If the session I'm attached to by default is opened on a larger screen, I run into the resizing problem.
    [2] Is there a way to attach to a session which has the current screen's dimension (if there is one)? Maybe the session can automatically be sorted by screen size, so that by default I'm attached to the smaller screen.
    [3] Another possible solution: Is there a way for tmux to warn me whenever I'm about to resize a session, be it by changing the session (scenario 1) or by attaching (scenario 2) (which, I assume, is in the end equivalent to tmux anyway), and allow me to abort my attempt?
    Any suggestions are appreciated!
    Last edited by cryptkeeper (2014-12-10 08:18:22)

    Hi David, Thanks for helping me. the video was shot on the new sony hdr-hc1e (pal).the clip and seqeunce are both set to 1440 x 1080 but based on where i assume you were going i created a new sequence at 1440 x 1080 and loaded one clip to it, it works correctly. i think the issue was that when i created the first sequence it was at a different frame size, i changed it but the athough the changes show in the browser they don't seem to work the same was as a sequence which is correctly specified at the start, do you have any idea how i can make sequence changes and have them take effect on an already created sequence?
    thanks a million

  • [SOLVED] Tmux doesn't parse the configuration for ~/.tmux.conf

    Similar to the issue found here, although since the solution posted does not work, I have nothing to go off of.  I did a trace on tmux, and it's reading the configuration file (also, even a removed ~/.tmux.conf doesn't have it read /etc/tmux.conf), but it isn't actually executing the commands I put in there.  I can source configuration manually inside tmux, so it's a minor annoyance at best.  Permissions are 644, it's in where it's supposed to read, but for some reason it just isn't parsing. 
    My tmux configuration right now:
    set-option prefix C-a
    set status-fg brightgreen
    set status-right "#[fg=brightwhite] (>^,^)><(^,^)><(^,^)><(^,^<) #[fg=brightgreen] #T #[fg=brightwhite] <(^,^<*>^,^)> #[fg=brightwhite] %F %T"
    set status-right-length 100
    set status-interval 1
    set status-bg blue
    bind C-a select-window -t !
    bind C-n select-window -t +
    bind C-p select-window -t -
    bind C-Space select-window -t +
    bind Space select-window -t +
    I've also killed the server and removed the socket and directory at /tmp/tmux-$(id -u)/ to no avail including a quick reboot.  I've also tried starting with tmux -f ~/.tmux.conf, also to no avail.  Am I missing something?
    Last edited by minozake (2012-08-25 14:55:18)

    I figured it out.  First off, I needed to use set -g in order to get the options set globally, otherwise they would be thrown away.  For all the keys I wanted to rebind, I needed to unbind them first.  All in all, I finally figured it out, but I don't remember actually needing to unbind the keys before rebinding them.

  • Bind remote tmux window to local session

    I have been looking around but nothing I've found even understands what I want. I want to run tmux as a service on all of my machines as my user. Then, with as simple a process as possible, connect to the remote machine from within tmux on the local machine, create a new session (or attach an already running one) on the remote server but bind its new window to the local session. In essence I can now use my standard keys to switch to the window locally but split the window into panes like I'm on the remote system (so each pane is a shell on the remote system).
    Essentially, with a tiling window manager, I don't enjoy having more than one terminal open on the same workspace if can be helped. If I do, now I have to use two different sets of keys to switch first application focus and then a different set to manipulate tmux. Is this even possible? If not, what's the major limitation (Tmux, yes. What about it?)?
    My Solution:
    Well, I've came to a better solution, let X handle local terminal multiplexing. I recently switched to i3 from XMonad and find it's window interaction much cleaner (ie it's not just resizing them everywhere but actually hides, minimizes, full screens, etc). I now only use Tmux in TTYs, the console, and in remote sessions (when I SSH from Tmux I just run a non-multiplexed shell on the server). This is probably the better solution anyways. It's absurdly redundant to run Tmux in XOrg when your window manager is a multiplexer anyway.
    Last edited by Nycroth (2014-09-18 12:16:50)

    Yes all the cmdlets appear in EMS. 
    The output on another workstation using controso.com as a credential...
    PSC:\Users\username> $session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri http://server/powershell/ -Authentication Kerberos -Credential $cred
    [server] Connecting to remote server failed with the following error message : WinRM cannot process the
    request. The following error occured while using Kerberos authentication: There are currently no logon servers availabl
    e to service the logon request.
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or us
    e HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information,
     see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportExc
    The credential i used was controso.com\(my username) and my password

  • Tmux and xsession detachment, failed to commit changes to dconf

    Hi guys, I just moved over from Linux Mint to Arch Linux, and am trying to set up my desktop environment in a similar fashion.
    I'm currently running cinnamon desktop environment.
    Following https://wiki.archlinux.org/index.php/tmux , I've installed tmux and am experiencing an issue.
    When in gnome-terminal with tmux session started, I tried to run applications like 'nemo' and 'gitg'.
    The terminal keeps printing warnings whenever I tried to do re-sizing of the UI elements e.g. split pane, window resizing. Of course, the UI resizing doesn't work too and reverts back to default, causing annoyance.
    dconf-WARNING **: failed to commit changes to dconf: Could not connect: Connection refused
    Searching the forum, I came across this topic https://bbs.archlinux.org/viewtopic.php?id=165485 which hints on corrupted dconf file. I tried the the fix without success.
    After further digging, I found a comment in launchpad bug-tracker https://bugs.launchpad.net/ubuntu/+sour … bug/975889.
    Sepero (cowpie2000) wrote:I discovered that this problem was occurring because the terminal (running in screen) was no longer attached to the current Xsession. So the only issue here is that the output message could be more clear.
    Using the hint above, I did a test by running the applications in plain gnome-terminal without tmux, the above warning does not appear, and all UI behaviours are as per normal.
    If the xsession detachment issue is indeed the case, then I probably must have missed a config settings somewhere for tmux, gnome-terminal, bash, or other related settings.
    I'm all ears for some direction where I can look into to address this issue.
    Thank you.
    Edit: After posting this thread, a package update and system reboot caused the issue to disappear. I can no longer reproduce the issue at the moment.
    Last edited by VKen (2014-05-22 04:02:54)

    http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=6C2558D8948FCC7938F2B419C24ACBC2?...
    The above article may or may not help.

  • New DVR Issues (First Run, Channel Switching, etc.)

    I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
    I recently switched to FIOS from RCN cable in New York.  I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
    1.  I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention.  Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording.  I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows.  I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR.  Is there a setting I can change that will force the DVR to choose one of the recording channels?
    2.  I setup all my recordings for "First Run" because I only want to see the new episodes.  One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day.  My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new".  Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR.  Any fixes?
    Thanks for the help.
    Solved!
    Go to Solution.

    I came from RCN about a year ago.  Fios is different in several ways, not all of them desirable.  Here are several ways to get--and fix--unwanted recordings from a series recording setup.
    Some general principles. 
    Saving changes.  When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes.  Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options.  Look at the Series Options window.  Look at the far right side.  There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes.  Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
    Default Series Options.  This is accessed  from [Menu]--DVR--Settings--Default Series Options.  This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options.  You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create.  Be sure to SAVE your changes.  This is what you will get when you select "Create Series Recording" from the Guide.  When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead.  Series Options can always be changed for any individual series set up later--but not for all series at once.
    Non-series recordings.  With Fios you have no directly available options for these.  With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series.  With Fios, your workarounds are to create a series with options for a single program, then delete the series later;  change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
    And now, to the unwanted repeats. 
    First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only".  If not, fix that and SAVE.  Then check you results by viewing the current options using the Series Manager app under the DVR menu.
    Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New".  It happens.  Set the series option "Air Time" to "Selected Time".  To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide.  Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored. 
    Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New".  These can be ignored in your series if you set the series option "Channel" to "Selected Channel".  Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes".  However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.  
    As for you missing two minutes,  I have sereral instances in which two programs start recording at the same time.  To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time.  You might have an older software version.  Newest is v.1.8.  Look at Menu--Settings--System Info.  Or, I might not have noticed the loss of minutes.  I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording.  There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them.  With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

  • Pension issue Mid Month Leaving

    Dear All,
    As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010                    0.00           6,500.00.
    Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
    Please suggest.
    Ashwani

    Dear Jayanti,
    We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
    RT table for year 2010. DOL 26.04.2010
    /111 EPF Basis              01/2010                    0.00           8,750.00 
    /139 VPF Basis              01/2010                    0.00           8,750.00 
    /3F1 Ee PF contribution     01/2010                    0.00           1,050.00 
    /3F3 Er PF contribution     01/2010                    0.00             509.00 
    /3F5 Ee Mon PF contribution 01/2010                    0.00           1,050.00 
    /3F6 Ee Ann PF contribution 01/2010                    0.00          12,600.00 
    /3F9 PF adm chrgs * 1,00,00 01/2010                    0.00              96.25 
    /3FA PF basis for Ee contri 01/2010                    0.00           8,750.00 
    /3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00 
    /3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00 
    /3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00 
    /3F4 Er Pension contributio 01/2010                    0.00             541.00
    /3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
    /3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
    /3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
    /3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
    /3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
    /3R3 Metro HRA Basis Amount 01/2010                    0.00           8,750.00
    1BAS Basic Salary           01/2010                    0.00           8,750.00
    RT table for year 2009. DOL 27.10.2009
                                                                                    /111 EPF Basis              07/2009                    0.00           9,016.13
    /139 VPF Basis              07/2009                    0.00           9,016.13
    /3F1 Ee PF contribution     07/2009                    0.00           1,082.00
    /3F3 Er PF contribution     07/2009                    0.00             628.00
    /3F5 Ee Mon PF contribution 07/2009                    0.00           1,082.00
    /3F6 Ee Ann PF contribution 07/2009                    0.00           8,822.00
    /3F9 PF adm chrgs * 1,00,00 07/2009                    0.00              99.18
    /3FA PF basis for Ee contri 07/2009                    0.00           9,016.00
    /3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
    /3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
    /3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
    /3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00 
    /3FC Pension Basis for Er c 07/2009                    0.00           5,452.00 
    /3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00 
    /3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00 
    /3R4 Non-metro HRA Basis Am 07/2009                    0.00           9,016.13 
    1BAS Basic Salary           07/2009                    0.00           9,016.13 
    Now please suggest what to do. where is the problem  ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
    With Regards
    Ashwani

  • Open PO Analysis - BW report issue

    Hello Friends
    I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
    datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
    (Delivery completed).
    We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
    We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
    complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
    quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
    delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
    following:
    DOC_NUM     DOC_ITEM       DOCTYPE     COMP_DEL
    650000001       10     UB        X
    650000001       20     UB        X
    650000001       30     UB
    650000001       40     UB      
    When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
    system.
    Any help is appreciated in this regard.
    Thanks and Regards
    sampath

    Hi Priya and Reddy
       Thanks for your response.
                         Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
                        I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
                       In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
    Record No.    Doc.No.                    Item              Processkey         Rocancel     Elikz
        41               6500000001            30                    11                            X           ---    
        42               6500000001            30                    11                            ---           X
        43               6500000001            30                    10                            X           ---
        44               6500000001            30                    10                            ---         ---
    (Here --- means blank)        
    Thanks and Regards
    sampath

  • HP LaserJet Enterprise 600 M602 driver issue

    Hello,
    I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
    Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
    Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
    Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
    Regards,
    Anatoly

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Windows 7 displays error message when exiting +cursor issue

    Two issues here. CS5 Phoshop on Wind 7 64 bit.
    Physical processor count: 8
    Processor speed: 3073 MHz
    Built-in memory: 12279 MB
    Free memory: 9577 MB
    Memory available to Photoshop: 10934 MB
    Memory used by Photoshop: 80 %
    Image tile size: 128K
    First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
    The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
    Any help will be gratefully accepted.
    Doug

    function(){return A.apply(null,[this].concat($A(arguments)))}
    doug87510 wrote:
    The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
    Well, that issue is simply a matter of hitting the Caps Lock key.  When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair.  That's a feature, not a bug.
    Glad to hear the 11.1 drivers are out.  I will download them and try them now myself.
    Regarding "Adobe QT" crashing...  QT brings to mind QuickTime, though that is Apple, not Adobe.  Do you have Apple QuickTime installed?
    Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
    -Noel

  • Issue in Creation of Periodicals for Contracts in CRM7.0

    Hello,
    I have a requirement to create Contracts in CRM7.0 system.
    And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
    Good part is Contract Order gets created, but onlywith Header Details.
    The issues i am facing --
    1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
    2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
        here what does 'Logical Key' field indicate? What should be passed here.
        What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
    3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are -  Partner, Product, terms/appointments, Status, LongTexts......
    Any help/inputs would be appreciated.
    Hope my problem is stated clearly ...
    --Regards
    Dedeepya

    Hi Anu,
    i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
    Ensure that you are passing a correct entry in INPUT_FIELDS structure.
    As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
    You can preset your break-points at :-
    1. FM - CRM_ORDER_MAINTAIN
    2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
    3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
    Regards
    Dedeepya C

Maybe you are looking for

  • How do i drag indicator control type on WPF instead of using Drag and Drop points

    In my WPF application, i have a window which is docked with the screen. i want to automate to expand the window using an Indicator control type, by sliding it. As of now i use StartDrag and StopDrag using specific points, which is not correct when it

  • How to  load data into user tables using DIAPIs?

    Hi, I have created an user table using UserTablesMD object. But I don't have know how to load data into this user table. I guess I have to use UserTable object for that. But I still don't know how to put some data in particular column. Can somebody p

  • Upload files from my app works fine in JDev but NOT on app server???

    i guys, I'm using jdeve 10.1.2. and adf bc's. So here's my problem: In my application i need to allow for the upload of files from user's computers. This works perfectly fine from jdeveloper but when i deploy my application on the application server

  • Third Party Performance Monitoring Tools

    Are there any Third Party tools that can map the user transactions to the CPU utilization on the database server? What we are looking for is the ability to map the CPU time on the DB server to the transactions on the application servers. For example

  • When using nav in car battery % still falls.

    Hello When I use the Copilot USA navigation in the car I still notice that the percentage charge drops despite it being plugged into the USB port in the car. I am using a flush mount iLuv USB car charger which claims to be 5V 500mA. The 12V power plu