To adjust third party adjustment center update in the warranty claim (WTY)

Hi Gurus !!
Our business is a tire wholeseller and retailers and when they get customer's warranty claim they send to adjustment centers to check weather it is covered by manufactures warranty or not. Business wants to see that update of the adjustment center(from JDE system) in the warranty claim (WTY) in the SAP.
How it should be done ?
I suppose we have to create a new interface and it should be done at the item level ? (because one warranty claim document can have number of warranty claims for different product)
And is their any specific field that allows that update or we have to come up with new?
Please HELP !! Any help will be really appreciated
Best Regards,
Bhartu

hi,
http://help.sap.com/saphelp_dbm700/helpdata/en/51/b2c77ec1dc40069170a888e6842764/frameset.htm
kapil

Similar Messages

Cisco UCM with Third Party Contact Center Solution

Hi all, hope everyone is well.
Anyone out there running Cisco UCM with a third party contact center solution ? would love to hear your experience on this subject.
Thanks in advance !!
Danny

I have not heard of any sucessful stories, which vendor are you considering and what would you not go with UCCE/UCCX?
I used to work for Rockwell (Aspect today) which attempted to integrate their Business Contact Solution with CUCM (back on 3.3) and it worked OK for low volume calls, but never had any customer adoption.
I have not heard of any other known ACD vendors integrating with CUCM.
Chris

Do third party replacement tips fit on the apple in ear headphones? I prefer foam tips as they block out much more sound, but I'm not sure if Apple use the standard fitting for headphone tips!?!?!?!

Do third party replacement tips fit on the apple in ear headphones? I prefer foam tips as they block out much more sound, but I'm not sure if Apple use the standard fitting for headphone tips!?!?!?!

Answer found. Please find below an amazon review explicitly mentioning adding third party foam tips. Sounds like they fit and work like a dream:
"As a audio engineer, I own about a dozen different sets of earphones and in-ear 'phones. My favorite, by far, are my sure SE530s. I have some Sennheiser cx400s which are good workhorses, but lack the finesse, clarity and stunning accuracy of the Shures. For convenience, I bought the Apple's, as I wanted something I could use with the phone for calls.
I found the sound to be quite clear and beautifully clean, but like many, no matter how I tried, the stock Apple tips never made a good seal. The seal is absolutely essential to getting bass out of a balanced armature design. For you non-engineers, just trust me that if you don't have a proper seal, you will have no bass.
In my case, I think the trouble had to do with the largest size being a tiny bit too small, and the silicon being too rigid, yet slick, so they left small airgaps and were easy to remove. I tried using some foam tips from a third party, but their large was more of a medium, and never came close to a snug fit.
As an experiment, I dug around in my ear-tips from my Shure's and tried their rubber tips which are about the same size as Apple's large tips, but made of a more pliant and slightly sticky rubber.
OMG, what a transformation. Suddenly the sound blossomed, the bass became rich and well balanced, and the "top-heavy" sound was totally mellowed into a rich, well balanced and incredibly detailed presentation.
Make no mistake, these are the best 'phones under $200 I have ever heard. The bass is deep and warm, very detailed, and totally lacking fuzz or buzz that I can hear in the Sennheiser set. Look at getting tips from a better headphone. The trick is it has to have a soft rubber base that can expand over Apple's slightly larger stub. Some tips, like the Shure foam tips, have a rigid plastic sleave in the tip to keep it's position correct, and these won't expand over the larger Apple posts."

Intune & Third Party Software Automatic Updates

Can Windows Intune ensure third party software such as Java, Adobe Reader, & Flash is updated? I at-least want an email when a PC has an out of date version of the above software. If Windows Intune can't do
this, any recommendations?
We're a small business that simply uses Windows Intune and Office 365. Recently a PC had a vulnerable/out of date version of Java and visited a compromised site, resulting in a nasty virus. Obviously I don't want this to happen again.
Update: I ended up using GFI Cloud's patch management to address the lack of automatic third party patching in Windows Intune.

That requires manually uploading patch files for third party software daily... I'm looking for something that can automatically update common third party software that cause major security concerns, or at-least notify me when they are out of date.

Third party software not updating anymore!

It used to be the case that i could open, speed download, VLC, skype or whatever and the app would tell me there is an update to download. However this last few months all my third party software has stopped doing this, even if i physically go to 'update software' in the menu bar the message i get is this 'there is currently no software update for this app'.
If i go to the venders websites i can download and drag the software into applications where it overwrites no problem.
Any theories as to why this has started to happen to all my software except for OSX updates which work fine.

no, never heard of it actually
??

Third Party Sales- VPRS updation

Hi all,
When i create Order related billng how system will know whether order qty=delivered qty by vendor?
if Or is 10qty & Vendor has supplied 7 then?
is it updated by MIRO transaction?& how VPRS(Statistical price) ie. price at which vendor has supplied goods to us.will update in F2 for customer?
regards,
Amol

Dear Amol
The third party order the billing relevence is always set to F because the order qty might not be delivered by the vendor always and there can be a mismatch
In cash sale only the billing relevence is always set to B because the cash sale as a process the customer picks up the goods from the stores and pays for it then and there so there cannot be a difference between order qty and delivery qty and so the order qty can be billed
This is what i was trying to explain you in the earlier thread and you didnot value the right pt
If you set billing relevence as B in third party then there you must be sure of vendor supplying the whole qty
Again this is against SAP standards and LOGICS also
The VPRS value is picked from MMR as explained by the other friend
Regards
Raja

Third party sales-Accounts updated

HI Friends,
How financial accounts are posted in FI like which is credited and debited in Third party order processing.
Thanks in advance.
Vamsi P

Hello Friend,
When ever we have postings in finance we will have debit as well as credit in equal scale. And very sorry but Its not quite clear that about which debit and credit you are asking.
How ever I am giving some Fi function which takes place while doing thisrd party transaction.
The billing in <b>third-party order processing (TPOP)</b> uses the standard FI functions to:
Invoice Creation and Generation (ERS)
Update of Accounts Receivable
Update of Billed Quantity
Update of Accounts Payable
Offsetting Accounts

Profit center updation at the time of delivery order

Hi,
We have three profit centers & three finished goods..All the three finished goods are manufactured in all the three profit center.At the time of sales order , i am not sure from which profit center i am going to deliver to the customer.so i want to update the profit center field at the time of delivery order.
How to tackle this problem? Please advice
Regards
Sarang
09937732217

Dear Sir;
i have the same your problem but in the deferent way but also i need to change the profit center in the delivery wise
thanks
Mohamed Helmy
+20 10 222 0 386

Third party sales with out hitting the FI

Dear SD gurus
I have a requirement with one of my client.
The client sends a PO to a vendor in Thailand plant from the Home country. The vendor in-turn manufacture's the materials from the PO and delivers it to the customer place and at the same time the vendor himself simultaneously sends the invoice to the customer and receives the payment. The requirement is that the client wants to track the sales process and also the reports relevant for the same but without hitting the FICO.
They send only the Purchase order with the sales order created from the home country and nothing else they do with the SO.
Kindly give me a solution to handle this requirement.

Hi,
For third party sap has provided TAS item category, wherein when you create a order, a PR will be created and then a PO.
This PO will go to the vendor and who in turn send the goods directly to the customer.
The vendor sends us the POD and invoice by which we can do the Goods receipt and invoice receipt in SAP.
Now here with help of a MM resource you can map the scenario by which you can do the GR and also show the necessary accounting entries etc. with help of FI resource.
I am not sure what approval process you are talking about... Plz elaborate so that we can help you out.
Regards,
SB

Third party backup software, how is the log sequence working?

Me and a colleague had a discussion about how third party software and full backups locally on the SQL works together.
If we use TSM that do full backups and then logbackups every hour in between for example.
If I between the two full backups from TSM accidently do a "non copy-only" full backup do I then also break the whole log sequence backup from then and untill the next TSM backup is?
Or can I use the full backup from my mistake and then take the log backups from TSM that occured after that fail and restore the database?
I guess this depends on the third party backup software, but in my mind it should work but according to him it doesn't.
Try to "paint" how I mean:
I = full TSM backup
- = log TSM
F = my fail backup full but not copy only.
I---F-------I
^ is where I would want to restore with both my full one and the logs from TSM. Hope you understand what I mean.

yes, you should be able to use the full backup taken in middle and use the rest of the log backups taken afterwards to restore the database.while I do not use TSM, we use QUEST(DELL) LITESPEED, that takes full backup once a day and log backups
every 15mins.
if someone accidentally takes full backup in the middle of day with out 'copy only',
log sequence will break and successive log backups depend on this full back up.
while this should be prevented from happening in first place, you can still restore from native full backup and then apply log backups taken from third party taken after the native Full backup.
if this happens, I would restore the FULLBACKP with NORECOVERY using NATIVE SQL and then use lite speed syntax to restore the log backups.Remember, native sql cannot read third party formatted backups(atleast litespeed), thats why I restore the full backup
using native sql, since it was taken with native sql backup and log backups using litespeed syntax.
Hope it Helps!!
Thanks, well it was just a theory discussion we had about the issue. But none of us could find info on the internet easy to prove our point :) Thanks.

What is a good third party display to use with the Mac Mini?

The Acer monitor I bought simply doesn't work with my first generation Mac-Mini. When connected to the VGA connection I get a "input not supported" message. When I connect the DVI, the screen blacks out when I scroll and then comes back, at first I thought it was just with Firefox but soon discovered it was with any application I used. After some research on the internet I discovered that there is a problem with the firmware design on the DVI's on Acer Monitors. My new Acer monitor is enjoying it's new home in my sisters office, on her desk, connected to the VGA plug on her computer, enjoying Windows XP.
At another web site for the Mac-Mini I was told that there are not that many displays that work for the Mac-Mini and I would be better off purchasing an Apple display, only problem is that the Apple displays are not within my budget. I would like some suggestions on this board from users as to what third party displays they use with a first generation Mac-Mini? I'm looking in the budget range of $200 to $250 dollars. I have a first generation Mac-Mini, Mac OS X Panther.
PS I have tried setting monitor resolutions using both the VGA and DVI plug, they don't work.
Thank you for any help I receive.

Charles,
I cannot speak on behalf of hooking this model of monitor up to a mini, however I do have a 19" Planar monitor at home hooked up to an old G4 tower via VGA, and the 19" Planar monitor that I have at work is hooked up via digital to my G4 15" PowerBook. I love both of these Planar 19" LCD monitors, and have absolutely no complaints. Planar's three year warranty is nice, and their tech support is top notch. I had an issue with the monitor at work, and I had a replacement on my desk in two days. Returning the bad monitor in the pre-paid box that the new one came in made things effortless. We have a few Planar's in the school district that I work in, and have no major issues with any of them.
Not too sure what the most recent pricing is on this model, but CDW was selling them for around $225-$230 delivered right to your door.
Hope this helps.

When will third-party accessories be available for the iPhone 6?

When will third-party accessories such as car chargers and cases be available for the iPhone 6?

Case-mate already has cases available: http://www.case-mate.com/iPhone-6-Cases/Case-Mate-iPhone-6-Tough-Case.asp
Any of the car chargers currently available will work with the iPhone 6 and 6 Plus.

Anyone else have difficulty using third party software and websites with the new MacBook Pro with retinal display?

I just returned my new Mac book pro with retinal display after three very disappointing three weeks of trying to use certain websites and other third party programs (Quickbooks, Raintree) that would not function properly. My husband own the previous MacBook Pro version with the built in CD rom and I was able to use those above mentioned websites and problems with the no difficulties. Did I just happen to get a lemon or is this a function of the computer being too new for third party software?

Programs such as Quickbooks pro for Mac, I was able to import my previous data and I was able to enter about 5 new transactions before it stopped being able to save transactions. Other programs ( Raintree ) that I use via VM software as a windows based program I was able to access and use some features but not others. On the web browsers (both safari and Mozilla) I use a website that has an analyzer feature and it would pull up a blank screen in the place where I would enter pertinent information. They tried pulling this website at the apple store today and the same issue happened. All these programs and website I am able to access and run smoothly with no issues on my husbands MacBook Pro , which is why I returned my MacBook. I just wondered if others were experiencing similar issues with their MacBook with retinal display.

Third party GPS SW provider for the Nokia 5800

I have been going though the posts for some time now in reagrd to GPS SW for the 5800, namley touch screen, I am not interested in the Nokia maps but a third party SW.
I read that Garmin have a version which is supposed to work with the touch screen but could not find any support for this on the Garmin site, other manufactures like AmazeGPS claim there SW works with the 5800.
Does any one have any additional info on this issue?

I Use Garmin on my 5800 but find it tends to freeze up a lot. Also when navigating in landscape mode, The Application will Beep and then exits for no reason
If this Post is helpful. A click on the White Kudos star is always Appreciated
Last Nokia: Nokia Lumia 800
Current Phone: A Non Nokia Device
Previous Phones:Don't Ask ;-)

Third Party Access to update SAP system vi SAP Portal..

Hi Expert,
We need to implement SAP Vulnerability in EP , Could you please advise me what are things need to be taken place in EP 7.01 SP 13 to stop portal access from any anonymous user who is not in part of business user...
Thanks in advance for supporting lot and guide a right path to implement this in porta....
Best reagrds,
Sudhir

Hi Michael,
there are different ways of accessing the SAP backend system from an iView developed with the PDK for .NET. You can use
- the SAP Connector for Microsoft .NET (design time supported only in VS 2003, runtime works in VS 2005)
- Web Services if your SAP system is running on Web AS 6.40
- Web Services via XI/PI or BizTalk Server
- 3rd party adapters
- Enterprise Services
If you browse through the forum and sdn.sap.com of www.microsoft.com/sap you will find a lot of information and pros/cons for the different methods of how to connect to the SAP system.
- Juergen

To adjust third party adjustment center update in the warranty claim (WTY)

Similar Messages

Maybe you are looking for