To all who ordered from att, and not getting emails, sold out.

ok so i ordered my iphone 4 from att.com at approx 630 this morning..i used my visa debit card...there was a $1 hold on it followed shortly by the cost of the phone for me which was $422 after taxes since i wasnt eligable for the the early upgrade..well i have a order number and it shows up on the order details and everything but i never recieved a email confirmation like others mentioned they havnt recieved..i called att and told them what was going on and the customer service rep, who was the most helpful rep i have ever delt with in all honesty, said that the order was processed and that my order should be on time..she told me that their servers or what not are backed up and it might take a while to get the confirmation email and not to worry everything was ordered fine. she also confirmed the "rumor" about att being sold out of pre orders..she told me that anyone who ordered their phone after 430 eastern time would not recieve their iphone 4 on time, and would recieve it after june 25...
glad waiting up was worth it for me at least...just thought i would let you all know what i was told

I received my order confirmation email around 5:13 AM EST this morning from AT&T. Unfortunately, I entered my PIN incorrectly to transfer/port my VW number. I was told by an AT&T representative around 10:30 AM that my order would not be processed until the PIN was resubmitted correctly. My port status was finally confirmed around 2:30 PM. As of now my order status is "in progress" with all "quantity ordered"s. I'll have to call in and confirm that my order will be delivered on the 24th!

Similar Messages

  • Sharepoint 2013 document library incoming email without attachment not firing event and not getting email

    sharepoint document library incoming email without attachment not firing event and not getting email
    If email contains attachment it works. Is there any setting in document library that will allow emails and eventhandler to fire with out attachment?
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    What is the purpose of email sent to document library if no attachment. What document library will do what that email if it cant find attachment to save and create a spdoc object. If you want to store email/communication body then opt for site mailbox
    app.
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Pre ordered from att and apple?

    I have been trying to pre-order the iphone 4 yesterday forever and I finally got it from att but no email or anything and didnt show up in the order status. Now it is showing up in the order status. I didnt think the order went through so I kept trying with apple and i eventually got it and its being delivered on the 24th but will they both come? Will it effect anything that i ordered from apple and att. Oh and also in the order status on apple it says Custom Configuration? Does that have anything to do with it? And for the order date on apple it says 6/15 and on att it says 6/16. Please respond with answers and thanks in advance.

    I meant pre sign for the order delivery when you pre order through att. Do they give you a option to do that because i am not sure i will be home.

  • Sales orders from CRM are not getting blocked with credit check

    Hi All
    I have configured ECC in such a way that , if cutomer does not have enough creditlimt, then those sales order will get blocked. Our orders will come from CRM, and some times some orders are not getting blocked with credit check even though the customer does not have credit limit. And at the same time some orders are blocked with credit check...what are all the things that should be checked to diagnose the problem.
    Thanks in advance for looking into this

    Please check if you have any custom code/user exit in ECC which uses transaction code (VA01 , VA02 or VA05 etc) prior to invoking credit checks. 
    Orders created via CRM will not have transaction code set (SY-TCODE).

  • Switching phones and not getting email connectivi​ty

    Hi there,
    Never knew switching blackberry could be so involved.  
    I had an old 8310, with all my email accounts on etc, as pay as you go with O2.
    I upgraded to a newer secondhand blackberry (yes we can't all afford new ones), a 8900 which was my sns and had been on orange.
    The new phone was unlocked professionally, and I did a hard wipe afterwards, master reset (or thought I had).
    The phone is regsered with blackberry - confirmed
    The phone is regostered with O2 confirmed.
    The new phone has recognised all the email accounts and I have entered the passwords to enable.
    However I still can't get access to email (all the usualphone functions are fine).  I have reset by removing battery twice, no joy.
    Am I missing somethig, or is there a delay in the accounts registering??? if so how long
    Thanks Mark

    There is no activation fee for activating a different phone on an existing line.  You only pay an activation fee when you start a new line of service.
    As to the survey, I've never been prompted to answer any questions like that when switching phones.  The only reason you would not be able to use your old phone as a backup is if you report it to Verizon as lost or stolen, or fall behind on your payments while that phone is on your account.  If the phone is listed as lost, stolen, or tied to an unpaid account, it is placed on a blacklist and cannot be activated on any Verizon account.
    You can either use the online tool, or just turn off your old phone and then dial *228 and choose option 1 from the new phone.

  • Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

    Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
    Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
    Thanks for any suggestions.

    I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
    Now I am back on my Mac. I meant the following:  Batch Change the date for a large range of photos, that should have a date stepped in increments.
    Select all Photos at once and use the command "Photos > Batch Change".
    Then set the date for the first photo and select an increment, e.g. one minute.
    Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date.  This way it will be unnecessary to change the titles or filenames.

  • I have a friend who was going to sync her phone with my computer to get the new update..  how do i add her phone with out her losing everything on her phone and not getting all my info on her phone..

    i have a friend who was going to sync her phone with my computer to get the new update..  how do i add her phone with out her losing everything on her phone and not getting all my info on her phone..

    First, create a separate login on your computer for your friend. Do this BEFORE you do anything else. Next, make sure iTunes is up to date. Then:
    1. Disable auto sync when an iPod/iPhone is connected under Preferences>Devices in iTunes.
    2. Make sure you have one contact & one event in the supported applications(Address Book, iCal) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
    3. Connect her phone, iTunes running, do not sync at this point.
    4. Store>Authorize this computer.
    5. File>Transfer Purchases(To make sure all purchased content on her phone will be in her itunes library).
    6. Right click in the device pane & select reset warnings.
    7. Right click again and select backup.
    8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
    9. This MUST be followed by a sync to restore her itunes content, which you select from the various tabs, You'll get a popup regarding her contacts & calendars asking to merge or replace, select merge.
    You should be good to go.

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • I have Lion on my IMac and it is hooked up to I Cloud, however, even though all settings are correct I am not getting auto sync of calendars  to my I Mac from my IPHone 4S or my iPad 1. Neither am I getting Photfrom my IPhone to my I Mac?

    I have Lion on my IMac and it is hooked up to I Cloud, however, even though all settings are correct I am not getting auto sync of calendars  to my I Mac from my IPHone 4S or my iPad 1. Neither am I getting Photfrom my IPhone to my I Mac?
    Can someone set me straight?

    Check system preferences to make sure you have iCal and your photostream checkmarked to TRUE.
    If you still have problems, give us more details.
    Also, make sure the calendar in iCal you're using/looking at is not "On My Mac", but actually an iCloud one.

  • I appear to have lost all my audiobooks from itunes and cannot download a new purchase to my ipod.  I have tried uninstalling and reinstalling itunes but this has not helped - I am desperate as I depend on my ipod for listening to books

    My ipod touch has lost touch with my itunes account.  I appear to have lost all my audiobooks from itunes and a nook I downloaded from audible.com last week is on my itunes but I cannot syn it to my ipod.  I have tried uninstalling and reinstalling itunes but this did not work and I now have a different screen with itunes which I am not familiar with.  I need my ipod for audiobooks and podcasts because I have a visual impairment.

    iTunes 11 does some thinks differently. See:
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    or
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    Also
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

  • Any news on Lenovo support for LTE 4G from ATT and/or Verizon?

    I'm getting close to ordering several T410 notebooks, but I came up with another reason to wait:
    As far as I can tell, Lenovo is currently installing WiMax 4G modems in the T410, but not the Qualcomm Gobi MDM9600 LTE 4G modem that supports both future LTE 4G service from ATT and Verizon and current 3G service from both carriers.  I would prefer to have a 4G LTE modem, not WiMax.
    Anyone know if Lenovo has any plans to start installing 4G LTE modems?
    The other option would be to get the current Gobi 2000 modem and just upgrade it later myself- is that sort of upgrade an easy card swap, or something harder (I'm thinking built-in 3G antennas may cause problems if I try to upgrade to LTE later).
    Any information would be greatly appreciated.
    Rob

    I'm interested as well. We are planning some X201 and T400 purchases.

  • I recently upgraded from an iphone 4 to a 4s, but now all songs purchased from iTunes will not play via my phone. Any idea how to fix this problem?

    I upgraded from an iphone 4 to a 4s, after a few initial problems and two restores, everythings seemed to be working...until I went to play some music, all music loaded to itunes via CD's played, but ALL purchased music from itunes does not play...i click on the song and the screen flashes to the image then goes back to the list of songs, so the purchased music shows up...just does not play.  Can anyone help resolve this problem? Thanks!

    here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
    There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
    Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

  • Planned order creation with PDS valid on only order start date and not finish date

    Hi All,
    We have requirement to allow creation of planned order manually if production version is valid on order start date and not finish date.  This is because lead time of order is longer. I refered OSS notes 385602. I could find out solution for this is implementation of OSS note 694140 to change validity mode at activity level to consider start date of first produce activity  in validity interval. Problem is even If I create order in APO by implementiong this note planned order is not transfered to ECC and it gets stuck with error production version not valid.
    Is there any way in ECC to control this? Any config or customization?
    Regards,
    Santosh

    Nilesh,
    I think there is a simple procedural skip happening in your business process. You are right when a planned order is created after MRP it would default assign it to the first available production version. 2options available for us,
    1. First use transaction MF50 and do the line loading and assign the quantites to the production versions/Production lines, so that the actual capacity planning is getting completed. This way you can have planned orders with both the production versions and matching to your actual line capacity.
    2. Use Quota arrangement concept, to automatically split the Planned orders during MRP for a percentage based on individual production versions.
    Now when backflush is performed S225 table is updated and Planned order qty also gets reduced.
    Hope this helps....
    Regards,
    Prasobh

  • HT1386 I have a new PC and want to sync my iphone so all my tunes, contacts , calender and notes can this be done?

    I have a new PC and want to sync all my tunes, contacts, calender and notes from my iphone into the new PC.
    Ideally I want to synce the notes and calender with outlook and the contact with windows contacts.  Do a need some software to do this?
    Thanks
    Vince

    Absolutely not... Just kidding!
    Absolutely!
    Simply connect your device to your computer
    Click on your iPhone under devices
    Click on the info tab above the picutre of the phone in the middle of the screen.
    Congratulations! your now on the Sync Settings page - here is where you will adjust your sync settings
    Click on Sync contacts- Choose windows contacts.
    Click on Sync Calendars- Choose Outlook ** Keep in mind it must be outlook 2003/07/10
    Click on the sync notes option below on that page- and now click apply - if prompted to merge MERGE

  • HT1277 all of a sudden I am not able to send out mail. I have checked and rechecked my account information including incoming and outgoing server info.

    all of a sudden I am not able to send out mail. I have checked and rechecked my account information including incoming and outgoing server info. Does anyone know what the problem might be? Thanks

    If you're having trouble sending mail, then either the SMTP (outbound) mail server settings — the server, the port, the user, the password, and whether SSL is in use or (unlikely) not — are incorrect, or the mail server is offline or has been reconfigured. 
    The SMTP (outbound) settings are in Preferences, but are buried rather deeply.  Select Preferences > Accounts > select the account > switch the outgoing mail server (SMTP) to Edit SMTP Server List... and then select the SMTP server from the list, and verify that the settings are correct with your ISP, and that your username and password are correct.
    The required settings vary by your particular mail ISP; you'll have to check with the ISP for the server and login details.
    To test settings, select Window > Connection Doctor > then (when the tests fail) show the details, and (if you can't sort out what happened) sanitize the settings and post the output here.
    Caveat: do not repeat password tests with the mail server, as various mail providers can be configured to assume these are a password brute-force attack, and lock out repeated login attempts.
    Caveat: never, ever, ever, ever, ever, ever, ever not-at-all enter a password when Mail pops up a dialog box with the "OMG YOUR PASSWORD IS WRONG!!!!!!!!!!! PLEASE ENSURE YOU CANNOT LOG IN AGAIN!!!!!" dialog box.  (I'm paraphrasing that error dialog box slightly.)  The correct answer to that Mail.app password dialog box is almost always "cancel" button.  Passwords stored in Keychain generally don't get lost or corrupted, and trying random passwords as that dialog box encourages just gets you locked out of various servers, and...

Maybe you are looking for

  • Custom Template for Third Party Balance Summary Report(Java type executable

    Hi Al,l we have a requirment to have a layout with some of the fields from Third Party Balance Summary Report( Which is a Java type executable and Data definition has Data Template attached(.xml)). I tried in below way. Coppied the Third Party Balanc

  • Flash cs3 newbie help - setting up a clicktag

    I am just about to pull my hair out - please help as I don't have that much hair to pull out. I created a flash file in Flash CS3 and was told I need to add a click tag for an agency who want to keep track of the click throughs for the ad. I have cre

  • Users per company code

    Hi Is there any report of Funtion module to get the list of uses per company code Do let me know if you know anything about this thanks sameer

  • Font in menu bar in CS5

    The font is very light on the menu bar in CS5. However Bridge in CS5 is bold and easy to read (as is the menu in PS CS3). How do I adjust the appearance of the menu bar? I would also like the gray color on the menu bar and tool bar and in the backgro

  • Support for Compaq tru64 unix ver. 5.x

    I would like to know when the Oracle 9i AS Portal product is ready for Compaq Tru64 unix ver. 5.x? And can I use the Oracle 9i AS Portal alone with Oracle 8i db also running Compaq Tru64 unix ver. 5.x? Thanks in advance