To change a domain installation to local installation

Hi,
To give you a little background,
We currently have two instance of SAP R/3 running on a server, ECC 5.0, 6.0, Oracle, on Windows.
Our organization was recently acquired by another company, because of this we had to go for a domain change.
To change the domain, system copy is procedure used. I have used the R3load procedure to
perform an export of the existing systems.
While this was happening, I am also working on another issue, with SAP's support, for this purpose, the said server
is currently in a DMZ to be exposed to SAP's support. According to our network guys, we do not have domain controllers
in DMZ, the server has to be a workgroup(if I understand it correctly, its local authentication). To enable this I would have
to use the export I had taken to do a local installation. This is just until the issue gets resolved, once that is done, server
will be moved out of DMZ and into the domain again. At which point, I would have to redo everything back into the new
domain.
This local installation has to be performed on the same server, by uninstalling the current SAP installation.
I have read several posts, regarding database copy, database restore. I am a little confused.
Below is a post where Markus suggests, database copy,
Re: Copying a Domain installed SAP System to Local Installed SAP System.
My questions are,
1. Even though I am fairly confident, the export was a success, Can I use the existing database setup, since
it is on the same server?
2. If I have to uninstall the existing system, it is my understanding that I would install the central instance as
a local installation and restore the db, How do I restore database for Oracle? I have looked for a relevant doc,
unsuccessfully.
3. The issue that I am working on with SAP's support, is related to webservices, where in we are trying to call
an external webservice from SAP, I am a little skeptical, if the functionality would remain the same after a local
installation, can somebody shed some light on this as well?
Thanks,
Vishnu

Hi dude!
To answer to the main question here: you are right, the supported method to change a domain (and this would include a change from domain to local installation or vice-versa) is, as you already know, to perform a system copy ( homogeneous system copy if the platform remains unchanged under the conditions of [note 547314|https://service.sap.com/sap/support/notes/547314]). You can refer to [SAP note 1233320|https://service.sap.com/sap/support/notes/1233320] to get further details.
However, let me explain that an export with R3trans is not necessary if the system copy is an homogeneous one. Using a database-specific procedure (e.g. attaching the MS SQL Server database files to another SQL Server engine) is faster by far. You can search for notes on the suitable procedure specific for your database (these will be in the component BC-DB-*, e.g. BC-DB-ORA for Oracle databases). Suggestion: look for "system copy" or "database copy" in the BC-DB-ORA component for your particular case.
In order to get further information on all this, please check [System Copy and Migration homepage on the SAP Developer Network (SDN)|System Copy and Migration]. In that page you will find also a direct link to the [Installation Guides|http://service.sap.com/instguidesnw]; the link is referred as System Copy Guides, from which you should follow your SAP release (e.g. SAP NetWeaver 7.0 (2004s)), then press the link plan and install (under the Installation section)
and finally, navigate to the section in which the PDF System Copy guides are (in this example, press 2 - Installation - SAP NetWeaver Systems to display the guides, and download e.g. the +System Copy for SAP Systems Based on NW 7.0 SR3 ABAP + Java+).
If you read the System Copy PDF document very carefully and do not dismiss to check the referred notes, this will be as easy as a pie!
Cheers!!

Similar Messages

Changing domain name after 12i installation

Hi all,
I misspelled my domain name during the 12i installation on Linux platform. i know it can be done by changing the context files of both application tier and database tier and running autoconfig after that, But i don't know the exact procedure to do it. Metalink note 387859.1 isn't very helpful to me. There are some notes for 11i on metalink but those are not helpful. Can any body tell in few straight forward steps how to change the domain name after 12i installation. Any help appreciated.

I misspelled my domain name during the 12i installation on Linux platform.Was the installation successful? Did the post installation steps complete successfully?
But i don't know the exact procedure to do it- Deregister the current database/application server
- Update the AutoConfig Context files (database and application)
- Shutdown the Applications Services
- Reseed the Net Services Topology Model ***
- Start the Applications Services
Check the following note (Under Net Services Section) for the required steps to deregister a database/applications tiers from the Net Services Topology Data Model:
*** Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=387859.1

Zombie Changes to Domain/Host Name in Mail Settings Window

For the second time since setting it up, the domain name has changed from "domain.com" to "local", and the host name has changed from "myserver.domain.com" to "myserver.local".
This tends to screw up my mail services.
I cannot determine why this would change, by itself, without any external intervention from anyone.
Suggestions?

Thanks for your reply!
The server is configured with static IP and running DHCP, DNS and mail, connectet to a D-Link router (the router also acting as a firewall). The DNS is configured with forwarder IP-addresses to the ISP and Google. Domain/hostname is changed from server.ljungh.net to server.local in postfix/main.cf (and other config files) and triggered if internet connection is lost by rebooting the router (or if internet connection to ISP is down for some other reason). Everything is working fine as long as the internet is up and running. The server is not acting as a firewall or multiple-network-controller.
Output from changeip -checkhostname:
Primary address = 192.168.0.196
Current HostName = server.ljungh.net
DNS HostName = server.ljungh.net
The names match. There is nothing to change.
dirserv:success = "success"
Output from dig server.ljungh.net:
; <<>> DiG 9.6.0-APPLE-P2 <<>> server.ljungh.net
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 61515
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0
;; QUESTION SECTION:
;server.ljungh.net. IN A
;; ANSWER SECTION:
server.ljungh.net. 10800 IN A 192.168.0.196
;; AUTHORITY SECTION:
ljungh.net. 10800 IN NS server.ljungh.net.
;; Query time: 0 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Sun May 30 16:45:38 2010
;; MSG SIZE rcvd: 65
Output from dig -x 192.168.0.196:
; <<>> DiG 9.6.0-APPLE-P2 <<>> -x 192.168.0.196
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 27573
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 1
;; QUESTION SECTION:
;196.0.168.192.in-addr.arpa. IN PTR
;; ANSWER SECTION:
196.0.168.192.in-addr.arpa. 10800 IN PTR server.ljungh.net.
;; AUTHORITY SECTION:
0.168.192.in-addr.arpa. 10800 IN NS server.ljungh.net.
;; ADDITIONAL SECTION:
server.ljungh.net. 10800 IN A 192.168.0.196
;; Query time: 0 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Sun May 30 16:46:01 2010
;; MSG SIZE rcvd: 105

Dreamweaver CS6: Installation disk won't allow a change in the location of the installation folder

First, I hope the moderators will cut me some slack for making a duplicate posting. The comments below were posted in the "Creative Suites" community. I just noticed that there is a "Dreamweaver" community. I feel the issues I've raised below are more relevant to the latter.
I recently purchased a Dreamweaver CS6 installation disk and have a valid registration code. The Adobe website has recognized this code as valid.
I started-out by having the installation disk install into a folder on a high capacity (0.5 tb) external drive. This was done while my Gateway PC was still working properly. I did a duplicate installation onto this hard drive (into a separate folder) to accommodate any work I wanted to do on a Dell laptop I also own. For a few days things seemed to work ok on both computers. Then the cursor on my Gateway stopped moving. Several changes of mice failed to resolve the problem. I've written-off my Gateway as "dead." However the Dreamweaver CS6 installation MAY (I can't remember) be on a "local" folder on my Gateway and I am concerned I will have trouble installing Dreamweaver on the replacement I've purchased. I understand one is limited to 2 installations. If needed, can I purchase a license for a third installation? And what might that cost?
After turning-off my Gateway I then went to my Dell laptop to try to work with Dreamweaver there. I felt it was best to install on a "local" folder so I deleted all the Dreamweaver software from the folders on my external drive. Unfortunately the installation disk is still "pointed" to the folders on my external drive. To make matters worse I am now getting an error message which indicates I need to install into a folder on the "local" drive of my Dell laptop. But the installation disk won't allow me to change the path. On the installation disk the "path" to my external drive is faded-out and it will not allow me to delete and type-in a new path.
I've spent what, to me, are big bucks on this Dreamweaver disk. It's the only website building software that seemed to get consistently good reviews. However, for me, Dreamweaver is becoming a nightmare! I'm very much of a novice at website building. I don't know how, in the world, I will be able to a) Create something, and then b) Get Dreamweaver to put it onto what is now a blank webpage. I recently got "Dreamweaver CS6 The Missing Manual" and "Dreamweaver CS6 For Dummies." So far I haven't been able to find anything, in either of these two books, which addresses the issues I've raised here.
Somebody--please help!!
Don't know if my screen name will show up. So my name is JACK, near Old Faithfull.

Have you tried calling Adobe Customer service? They can deactivate one of your installations so that you can install and run on a new system. And perhaps they can help with your other problem, or send you to a tech support rep who can.
With regard to your use of DW, I'd strongly suggest that you take advantage of this downtime by learning as much HTML and CSS as you can absorb. Multiple sittings would be helpful. The more you know about those two, the easier DW will be for you when you eventually get it going.
Here are some tutorial sites that may be helpful -
http://www.w3schools.com
http://www.html.net

How to impleament Single Sign On on local installation Server

Hi, we installed ERP.60(ABAP + Oracle) on Windows2003 by local installation.
But we need Active Directory integration for SSO with Microsoft Kerberos SSP.
Is it possible to implement SSO?
If it is possible, Please tell me the step.
Best Regards

hi,Markus
Thank you for your response.
Our server is already a member server of the domain.
I create a new domain user named "SAPService<SID>" and set parameter
snc/identity/as = p:SAPService<SID>@<DOMAIN_NAME>.
and set other snc parameters related single sign on.
And I try to restart Central Instance, but Central Instance cannot be restarted.
log file "dev_w0" wrote a part of snc
N SncInit(): Initializing Secure Network Communication (SNC)
N        PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/64/64)
N SncInit():   found snc/data_protection/max=1, using 1 (Authentication Level)
N SncInit():   found snc/data_protection/min=1, using 1 (Authentication Level)
N SncInit():   found snc/data_protection/use=1, using 1 (Authentication Level)
N SncInit(): found snc/gssapi_lib=C:\WINDOWS\system32\gx64krb5.dll
N    File "C:\WINDOWS\system32\gx64krb5.dll" dynamically loaded as GSS-API v2 library.
N    The internal Adapter for the loaded GSS-API mechanism identifies as:
N    Internal SNC-Adapter (Rev 1.0) to Kerberos 5/GSS-API v2
N SncInit():   found snc/identity/as=p:SAPServiceSID@D_ERP
N *** ERROR => SncPAcquireCred()==SNCERR_GSSAPI [sncxxall.c 1432]
N        GSS-API(maj): No valid credentials provided (or available)
N        GSS-API(min): No Kerberos SSPI credentials available for requested name
N      Could't acquire ACCEPTING credentials for
N
N      name="p:SAPServiceSID@D_ERP"
M *** ERROR => ErrISetSys: error info too large [err.c        944]
M Tue Oct 16 20:13:21 2007
M LOCATION    SAP-Server sv01_SID_30 on host sv01 (wp 0)
M ERROR       GSS-API(maj): No valid credentials provided (or available)
M GSS-API(min): No Kerberos SSPI credentials available for requested nam
M name="p:SAPServiceSID@D_ERP"
M TIME        Tue Oct 16 20:13:21 2007
M RELEASE     700
M COMPONENT   SNC (Secure Network Communication)
M VERSION     5
M RC          -4
M MODULE      sncxxall.c
M LINE        1432
M DETAIL      SncPAcquireCred
M SYSTEM CALL gss_acquire_cred
M ERRNO
M ERRNO TEXT
M DESCR MSG NO
M DESCR VARGS GSS-API(maj): No valid credentials provided (or available);;;;
M ;;;;GSS-API(min): No Kerberos SSPI credentials available for requested nam;;;;
M ;;;;name="p:SAPServiceSID@D_ERP"
M DETAIL MSG N
It is thought that "snc/identity/as" parameter is wrong .

Locale Installation: Is reboot necessary?

After installing a locale on a server, the install "Status" message says:
"A reboot is not necessary for the changes to take effect."
Yet the install log ominously proclaims:
"WARNING: Locale changes MAY NOT BE FULLY AVAILABLE until the server has been restarted!"
So is a reboot necessary to activate locales or not?
GTG

Hi Ross,
Yes, u need to restart the server.
http://docwiki.cisco.com/wiki/Cucm-phone-locale-installers#CUCM_User_Locale_and_Network_Locale_support
Do locales need to be installed on every Node?
Yes, Cisco Unified Communications Locale Installer MUST be applied to each and every Cisco Unified Communications Manager server in a cluster, starting with the publisher. After installation has completed, it is essential to reboot each and every platform in order for all user and network locale changes to become fully activated.
regds,
aman

Locale Installation Order with Pub/Sub

Hi,
I'm installing CM cluster 4.2 (1 pub and a few subs).
Wish to apply user/network locale for the cluster.
Documentation recommends
1. Install Pub
2. Install Subs
3. During non Business Hours
3.1 Install locale executable on pub at first.
3.2 Install the same executable on the subs.
3.3 Reload all the servers in the cluster.
4. Apply installed locale value where applicable (e.g. phones)
My question: is the following possible ?
1. Install Pub
2. During non Business Hours install locale executable on the pub and reload the server (cluster contains only pub)
3. Apply installed locale value where applicable (e.g. phones)
4. A few days later install subscribers in the cluster (1 or more)
5. Then run locale installer on the subscriber servers the same way as for pub, reload then.
A little silly question IMHO, but I am in doubt.

Hi Tobivan,
This is actually an excellent question (not silly at all :)
This method shouldn't cause you any unforeseen problems. This is the same way it would happen if you were adding new Subs to an existing cluster somewhere down the road.
Have a great day!
Rob

Installing Locale Installer with CCM 5.1.2

Hello, I need add the locale installer Spanish's in a cluster CCM with version 5.1.2.
In the download's page only avaible the version "cm-locale-es_ES-5.1.1.1-1.cop.sgn", I'm trying upgrade with version 5.1.1, it's fails.
For version CCM 5.1.2, can be updated with version 5.1.1 of locale to installer?
If a new version of locale is necessary to installer, somebody it has some forecast of date?
Thanks!!!

It should work. I've installed Polish locales cm-locale-pl_PL-5.1.1.1-1.cop.sgn with CCM 5.1.2 and 5.1.3. Both versions work without any problem.

Bonjour, Je viens de changer d'ordinateur et je souhaite installer ma licence Photoshop dedans. Comment dois-je faire ? Merci

Bonjour, Je viens de changer d'ordinateur et je souhaite installer ma licence Photoshop dedans. Comment dois-je faire ? Merci

je suis désolé
: Google Translator French: Rough translation of the French into English:
User is trying to print information onto paper to make a CD Sleeve, I believe. Here is what they wrote:
Downloaded itunes 11
Opened itunes on PC
Create music CD
Used "Print" in "file".
Never had problem before but now list is unreadable and "crushed together".
I went to "Layout" to change Format, but it works in Formats.
How do I find the function I used before I upgraded?
When I print, I use paper size a4 210 x 297 which corresponds to the size of a CD sleeve?
Thank you in advance for you answers!
? Pourrait fonctionner?
Essayez:
Mise en page de capture d'écran au format.
Enregistrer sur le bureau.
Imprimer l'image.
ou,
Recréez manches CD à l'aide du programme Paint ou InDesign.
Imprimer.
Might work?
Try:
Screen Capture layout in Format.
Save to Desktop.
Print image.
Or,
Recreate CD Sleeve using Paint Program or InDesign.
Print out.

Je viens de changer d'ordinateur, je veux réinstaller la suite CS5 et impossible : PayloadPolicyNode set action in Payload......

je viens de changer d'ordinateur, je veux réinstaller la suite CS5 et impossible : PayloadPolicyNode set action in Payload...... Adobe media player is required .....

Bonjour jllerouge,
1 Peut-être que vous avez d'activer / désactiver, donc s'il vous plaît jeter un oeil là:
http://helpx.adobe.com/fr/x-productkb/policy-pricing/activation-deactivation-products.html
2, Parfois, nous savons maintenant, le "fichier opm.db" est le coupable. Dans ce cas, vous devez le supprimer.
3. Parce-que vous avez déjà essayé "de désinstaller et re-installer".
Soyez prudent avec (de) l'installation aso. par (de) l'installation par vos propres ressources. Autant que je le regrette et aussi étrange que cela puisse paraître, je crains que c'est un défi pour Creative Cloud Cleaner Tool d'Adobe.
Parfois - quelles qu'en soient les raisons - CC ne "veulent" pas de travailler. Dans ce cas, vous devriez CC supprimer complètement et réinstaller par l'aide d'Adobe Creative Cloud outil de nettoyage. (Un essai de désinstaller par des ressources propres ne suffit pas!)
Je cite: Adobe Creative Suite Cleaner Tool permet de problèmes d'installation de détermination pour Adobe Creative Cloud et Adobe Creative Suite (CS3-CS6) applications. L'outil supprime les enregistrements d'installation pour les installations préliminaires de applications Creative Suite Creative Cloud ou. Il n'affecte pas les installations existantes de versions précédentes des applications Creative Suite Creative Cloud ou.
S'il vous plaît utiliser: http://helpx.adobe.com/fr/creative-suite/kb/cs5-cleaner-tool-installation-problems.html et suivez la séquence des opérations prévues
4.Si est nécessaire et pour d'autres questions cliquer http://helpx.adobe.com/fr/contact.html et si "ouvert" utiliset le chat, svp. J'ai eu des meilleures expériences.
Bonne chance!
Hans-Günter

J'ai installé photoshop element 11 une fois. j'ai changé d'ordinateur et quand j'installe à nouveau photoshop, on ne reconnait pas mon numéro de serie. peut-on m'aider.

j'ai installé photoshop element 11 une fois. j'ai changé d'ordinateur et quand j'installe à nouveau photoshop, on ne reconnait pas mon numéro de serie. peut-on m'aider.
I have instal photoshop one time on my last computer. Y try to instal photoshop on my new computer and my serial number not ok. What can i do.

Vous devez contacter le service clientèle d'Adobe par téléphone ou par clavardage. Ce sont des forums d'utilisateurs. Il n'y a personne ici qui peut vous aider.
En outre, nous ne faisons pas "Elements" ici dans le forum Photoshop. Les forums de Ps Elements est ici:
Community: Photoshop Elements | Adobe Community

Newbie question - Changing domain name from .local

Hi, I'm trying to change my domain name from dns.local to dns.domain.edu. Can someone help me with this. The server was already set up and some places it has:
dns.local and other places is has dns.domain.edu. when i type in dns.domain.edu into a browser it works. when i type in dns.local i get an error.

Leave the .local alone. That is your Bonjour access name.
Bonjour is also known as ZeroConf in the Unix world, and is how your Mac discovers other Macs, Mac file servers, and Mac print servers on your local network (also know as a subnet).
You can add search domains via
System Preferences -> Network -> Advanced -> DNS -> Search Domains -> [+]
A search domain is where you can enter 'fred' and the name lookup will look for fred.local, fred.domain.edu assuming both .local and .domain.edu are provied as search domains.
As to other people finding your via dns.domain.edu, that is up to the domain.edu name servers, and their administrators. Your Mac does not establish that, unless they have a dynamic DNS updating service.
To have a DNS name in a domain, your DNS name must be registered with the domain server that owns that domain name. That is not automatic.
In this case if you have not already been assigned dns.domain.edu by the domain name and fixed IP address by the owners of domain.edu, then you cannot just take the name dns.domain.edu. If you have been assigned the name dns.domain.edu and a fixed IP address, then you would set that up in System Preferences -> Network -> Advanced -> TCP/IP
At best, if domain.edu allows the DHCP servers on campus to both assign an IP address and also create a dynamic DNS name in domain.edu, then you might get a name like
college-name-192-168-27-232-subnet-12-dorm-name.domain.edu
A very creative and memorable name
If you cannot get the domain.edu administrators to give you dns.domain.edu as an addressable name, you can go ahead and get a dynamic DNS name from a service such as No-IP.com or DynDNS.org (free ones are available), and just run one of their dynamic DNS updating utilities on your Mac so that when your DHCP IP address changes, your dynamic DNS name is updated with the new IP address as well.
A dynamic DNS name service such as the 2 I just mentioned, will give you a fixed name such as fred.dynamicDNSnameService.net that will not change, and when you run an updating utility on your Mac, the dynamic DNS service will keep the fred.dynamicDNSnameService.net updated with the every changing DHCP assigned IP address.

CUCM locale installer packages

Yes, I know this is a very dumb questions.
I am not seeing a locale installer package for CUCM v10 that is united states. I see multiple other country packages. Am I missing something here?
Also, I was told to get the Cisco Part Number for this as well, would that be the file name or something else?
Thanks for your help, and sorry again for the dumb questions.

Hello ghuguenin,
I apologize that you are unable to access the United States installer package; I can't seem to access it either. However, there are a few other options you can consider:
You can install the United Kingdom or the Canada installer package here.
Another option is to install the combined installer package, which is also available on the webpage linked above.
I hope this helps!
Best Regards,
Leesa

Login problem after change in Domain name of portal

I have installed portal 3.0 Beta on windows 2000. installation has gone fine and everything was working. after this i made change in domain name. for this i ran ssodatan.cmd script (source from metalink).
now i am not able to go by
"http://domain_name/pls/portal30/
it gives the error
"The request for content either timed out, or produced an error, after 0 seconds in the browser"
Still i am able to go by "http://domain_name/pls/portal30_sso/" further if i login as any user, then all user are coming with "login server home page" as initial page.
any idea?
null

Hi Suzette,
I have portal 3.0.6.3.3 Beta i.e apache listener. For this i have not found domain name in registry. i made the following changes in htppd.conf file.
ServerName 194.170.231.141
<VirtualHost 194.170.231.141>
DocumentRoot E:\ORAPOR\Apache\Apache\htdocs
ServerName www.ahi-carrier.co.ae
ServerAlias ahiweb 194.170.231.141
</VirtualHost>
This 194.170.231.141 is my Fixed Internet IP.
my webserver machine name, where the oracle portal is installed is ahiweb(192.168.0.247).
also i have firewall before the web server.
Is these settings are OK for Portal.
I am using apache listener for my developer forms and reports, and they are working fine with these setting on the internet.
can i get white paper for these settings.
Thanks
null

Change Portal Domain

Hi,
I have installed SAP Enterprise Portal 6.0 SP2
I can access the Portal with the URL
http://ispci:50000/irj.
Now I would like to change the domain to something like
http://ispci.xyz.com:50000/irj
Can anyone please let me know how do I do this ?
Also where do I change the Port 50000 to any other port ?
Thanks in advance
Vivek

Hi Vivek,
Add you Portal System in to the Domain of the Company eg: XYZ.com
Then the URL will automatically gets changed.
For the Port, It depends on the Instance NUmber you have Given while installation.
There is Formula for calculating the Port. that you can find in the Installation Guice. I could not remember Exactly.
Regards
Sumanth

To change a domain installation to local installation

Similar Messages

Maybe you are looking for