To Get Busines Agreement Class and Business Agreement Number

Hi Experts
We need to find out Business Agreement Class and Businees Agreement number from Business Partner.
we have CRM Contract, CRM contract can have different line items which is stored in crmd_orderadm_i table. How can I use Product Guid to find out business agreement class and business agrement number.
Thanks & Regards
Sandeep

Hi
U can find these in the Master Table
CRMM_BUAG Master table for Business Agreement
CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU
Regards
Manohar

Similar Messages

Error: Contract object and business agreement do not match

Dear Friends,
I get this error on the service order.
Contract object and business agreement do not match
Any assistance would be appreciated.
Thanks and regards,
Aershid

Thanks Experts...
Sany.

Migration of BUPAs and business agreements

Hello,
Its my first thread and my English is not so good but i hope you can understand my problem.
We have to migrate BUPAs from an NON-SAP system to an SAP CRM 7.0.
We use the LSMW for this with IDOC Basic type CRMXIF_PARTNER_SAVE01.
This is okay and works good.
But we also have to create an business agreement for each of this migrate BUPA and this is a little bit tricky.
So i know that there also an IDOC type for this but i want to link this creation to the migration of the BUPAs.
That means i want to migrate one BUPA and after a successful migration of one BUPA i want to create his business agreement and so on.
So how can i do this?
Thx for help

No Idea? Or is my english to bad to understand?
Br,
Silvio

How to get MAC address list and HDD serial number from Windows and MAC machine?

Hi,
I'm developing a AIR application. I'm implementing the product key mechanishm. I need to identify the users' machines uniquely. I chose MAC address would be a better way. But a computer has list of MAC addresses including LAN card and Wi-Fi card addresses. So, I need to get the list of available MAC addresses from the computer and the Hard Disk Drive's serial number. HDD serial number would be helpful to cross verify the identity.
I'm able to get the MAC address using NetworkInfo class. But I need to get a list of available MAC addresses and HDD serial number.
Is there any classess to accomplish this task?
Thanks in advance.

See if this link can be of a little use to you.
http://www.adobe.com/devnet/air/flex/articles/retrieving_network_interfaces.html#ionComHea ding

Asset Super Class and Asset Super Number

Hi Gurus.
Please tell me how can we use Asset Super Number.
What is the use of Asset Suer Number and Asset Super Class
Thank You

Hi
Do a search on this forum to Asset Super Number. There is a message with the explanation and a direct link to the SAP help.
What is your requerement that you want to use this when you don't know what it is?

Error while creating Business Agreement from IC web Client

Dear Experts,
I am working on IC Web Client ( CRM 7.0) & ISU (ECC 6).
I was able to create the Business Agreement & sucessfully replicate the same to ISU as a COntract Account.
But when I Try to create the Business Agreement from ICWebClient I am gwtting following Error.
"No Business Agreement Class for Channel ICW, Usage 01 and Risk Class"
I have done the settings for ,Allocate Business Agreement Class as ;
Channel :- ICW ,
Usage :-Std Payment Data,
Risk CLass :- B,
Business Agreement CLass:- 01
But still I am Getting this error.
Can any one please help me in this

Hi,
Try maintaining an entry with blank risk class.
Regards
Prasenjit

Error While Creating Business Agreement via IC Web CLient

Dear Experts,
I am working on IC Web Client ( CRM 7.0) & ISU (ECC 6).
I was able to create the Business Agreement & successfully replicate the same
to ISU as a Contract Account.
But when I Try to create the Business Agreement from ICWebClient I am
getting following Error.
"No Business Agreement Class for Channel ICW, Usage 01 and Risk Class"
I have done the settings for ,Allocate Business Agreement Class as ;
Channel :- ICW ,
Usage :-Std Payment Data,
Risk CLass :- B,
Business Agreement CLass:- 01
But still I am Getting this error.
Can any one please help me in this

Problem solved mainatain Risk Class as " "

Initial Load of BUAG_MAIN (Business Agreements) IS-U = CRM

Hello. We are integrating ISU to SAP CRM 7.0.
We have been replicating Business Partners between the two systems for a couple of years, and now wish to begin replication the Business Agreements <=> Contract acconts objects (BUAG_MAIN)
In our development system, in order to successfully process the initial load of BUAG_MAIN, I had to RE-run an inital load of BUPA_MAIN. I am really unconfortable having to do this in our productive systems!
My question to you experts:
Is there a way to run an initial load of a dependent object (BUAG_MAIN) without having to re-run an initial load of the parent object? Any suggestions would be greatly appreciated!

Hello Pratik,
- There are no dumps in ST22
- There are no errors in SMW01
- No. range settings are set as following:
CRM: Master Data-> Business Agreement-> Define Number Range for Business Agreement:
No.     From number         To number          Ext.
01       000100000000       000199999999     X
02       000200000000       000299999999
ERP/IS-U: Financial Accounting (New)-> Contract Accounts Receivable and Payable-> Basic Functions->Contract Accounts->Number Ranges and Contract Account Categories
No.     From number         To number          Ext.
01       000100000000       000199999999
02       000200000000       000299999999     X
But before inital download we have set all no. ranges to External as prescribed in the set-up and load guide for business agreements and contract accounts.
(There is just one Business Agreement Class and one contract account category)
Hope to hear from you soon.
Kind Regards
Saima

Business agreement - Edit payment conditions in Customizing

Hi Guys,
I am getting below error when i am trying to create business agreement from CRM IC.
Error - Edit payment conditions in Customizing
I have completed all the required setting in CRM as well as in ISU for business agreement creation as well as replication.
Can someone suggest some solution
Thanks,
Nitin

Hello,
If you create a business agreement in IC WC you have to maintain the
customizing "Creation of Business Agreement"
But it may be the case that you maintained only payment relevant
parameters for customizing node
"Allocate Payment-Relevant Parameters to New Business Agreements"
for payment type "By Automatic Debit". In your case payment type
"By Invoice" may be needed and may not be maintained.
Please add this in customizing via the path: Master Data ->
Business Partner -> Business Agreement -> Creation of Business
Agreement.
Please also make sure you use a BP with role "Sold to Party" when
creating business agreements, as this is needed.
OR
See
Master Data -> Business Partner -> Business Agreement -> Creation of
Business Agreement -> Allocate Payment-Relevant Parameters to New
Business Agreement
In this customizing table check the country is maintained
I hope this information is helpful.
Regards
Olivia

Get information for classes from call stack in abap (like java reflection)

Hi,
is there any possibilty to get following information:
I want to program a logging tool. You can create a logging object and use some methods like
xxxxx->add_msg(msg) to put logging information to the logging object.
but i also want to find out, from which class/object/runtime environment this msg comes.
example:
class CL_ABC uses the logging tool and does following call:
lo_logger = CL_logger->get_logger().
lo_logger->add_msg( 'test the code' ).
now the method ->add_msg() in logger object is called. inside this method, i want to have the information, from which class/object the ->add_msg() method is called. after the call, the logging object must have this information like:
CALL_CLASS: CL_ABC
CALL_LINE: 83
MSG: test the code
any ideas?

You can use the SYSTEM_CALLSTACK function module.
Read this thread, Uwe has given details on both getting the calling class and method: Re: How to determine current method / interface method that is running?
Most probably this solves your needs.
Regards

Function module to read error message provided message class and mssg no.

Hi experts,
I am trying to populate my database table with the error message.
The error message as comming form standard code in an ITAB.
I am getting the error class and message number.
Can any body please tell me any function module to read the error.
Or is there any way to populate the database table with the error message.
Regards,
Sandipan.

Hi,
    You can use the Function module mentioned below.
call transaction 'VA42' using bdcdata mode w_mode
                                    update w_synch
                                  messages into it_mesgtab.
    loop at it_mesgtab into wa_mesgtab where msgtyp ca 'EA'.
    endloop.
    if sy-subrc <> 0.
      read table it_mesgtab into wa_mesgtab index 1.
    endif.
    call function 'MESSAGE_TEXT_BUILD'
      exporting
        msgid               = wa_mesgtab-msgid          "Messg class
        msgnr               = wa_mesgtab-msgnr          "Messg No.
        msgv1               = wa_mesgtab-msgv1
        msgv2               = wa_mesgtab-msgv2
        msgv3               = wa_mesgtab-msgv3
        msgv4               = wa_mesgtab-msgv4
      importing
        message_text_output = it_err-sapmessage.
   Append it_err.
Regards,
     Srinivas

Drop java class and java source

Hi,
When I query user_objects I get some java class and java source objects
select * from user_objects where object_type like 'JAVA %';
How do I drop these java source and java class objects from the database
I tried using the following command
drop java class /4a524d89_AutoTransliteratorPk
drop java source AutoTransliteratorPkg
But I get error ORA-29501: invalid or missing Java source, class, or resource name
Please someone help me in dropping these objects
thanks
saaz

was the java source all caps or was it exactly AutoTransliteratorPkg. If its exactly AutoTransliteratorPkg then try this
drop java source "AutoTransliteratorPkg"

How to get running application host and port?

How can I get the host name and the port number of the currently running application?
http://<host>:port/<context root>/faces/<page>
Thanks,
Mitesh.

FacesContext.getCurrentInstance().getExternalContext().getRequest().getRemoteHost()
FacesContext.getCurrentInstance().getExternalContext().getRequestContextPath()
FacesContext fctx = FacesContext.getCurrentInstance();
HttpServletRequest rq = (HttpServletRequest)fctx.getExternalContext().getRequest();
rq.getServerPort()

Crm middleware : R/3-ISU to CRM Business agreements and Contract accounts

Hi Guys
We are Downloading BP data from R/3 ISU system to CRM system and I did the relevant customizations using setup and load guide, along with the BP data it is required to download <b>Business agreements and contract accounts (BDOC buag_main) also for this download I don't have any idea about what customizations to do</b> to download BUAG_MAIN does any one have the document which specifies the required custmizations for downloading Business partner agreements.
My id : [email protected]
Thanks in advance
Warm regards
Rajasekhar

Hi Madhu,
Contract Account on ISU is Business Agreement on CRM. Please refer the following path to get the load guide for contract account.
The SAP Service Marketplace, http://service.sap.com/utilities => Product Information => mySAP CRM for Utilities => Cookbooks & Guidelines => IS-U Specific Set-Up and Load Guide for Business Agreement / Contract Account.
<b>Reward points if it helps.</b>

I am unable to get past the Terms and Conditions in the new update. I have hit agree several times but can not get past that part. What do I do next?

I am unable to get past the terms and conditions part of the upgrade. I have hit agree several times. What do I do?

Scroll down to the bottom of the terms and conditions, then the Agree button will light up and you can proceed.

To Get Busines Agreement Class and Business Agreement Number

Similar Messages

Maybe you are looking for