To run a program in batch mode

I have to creaet a program to run in batch mode to update anln1 and anln2.
selection screen : company and cost center.
I have to read z table
update anln1 and anln2 ( from table anla )
Can anybody help me how to write a program in batch mode and update....

Hi,
Write the entries logic with the condidtion like below.
after selecting the required data,
if sy-batch = 'X'.
Now update the required table.
endif.
Even you can put the select statement also after if condition.
now go to SM36 and define the Job with Program name or any other name.
Under Job condition select the execution mode/time of your program.
As you have mentioned the sy-batch condition , your program will work only for Back ground mode.
Hope it helps you.
Kind Regards,
Ravi Sankar.Z

Similar Messages

How to run labview program in debugging mode in windows 95 version

Respected all,
I am facing probelm while running probe.vi.
I received this command "connection to acquisition board was not found" when i run labview program.
I am using labview 5.1, fieldpoint FP 1000, NI-DAQ 6.5, Field point explorer version 1.6, Measurement and Automation Explorer 1.0.1.
I would kindly request you please help me how to run my program probe.vi in debugging mode in windows 95 version, so that i can locate where error occurs.
Thanking You
Yours faithfully
M.Vijay

Respected Norbert,
Thank you very much to for your help.
Norbert : Possible reasons are e.g. wrong IDs for measurement devices. If the error is connect to the FieldPoint, it is possible that it isn't configured correctly.
I am using Field point explorer 1.6, The Field point instrument FP 1000 and RS-232 port is using. It is confirmed that the field point instrument is working properly by LED light indication test.
Norbert: It sound like you are using DAQ devices (like PCI MIO 6952E) in the application. Are you sure that you select the correct device ID for this?
I am asking you to know, If i using Labview and Fieldpoint instrument FP 1000 to monitor my parameter interms of All, Channel 0, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Channel 6, Channel 7 for my measurement.
But now i need to solve the command connection to acquisition board was not found, The expert say this command is due to there was no AT-AO-10 Analog Output board was present in CPU.
I do not find AT-AO-10 Analog Output board in my CPU, Previously the instrument was worked perfectly by other person who assembled everthing to measure temperature.
The only aswer know send by previous person is if my task does not imply the use of a DAQ you probably have to locate where the DAQ driver is called and exclude it from the program. try to run the program in debugging mode so that you can locate where the error occurs.
I do not know how to proceed his instruction. So i would kindly request you to please help me to solve my probelm.
I also removed AT-AO-10 software from device manager >> Data Acquisition system >> AT-AO-10 just now.
I also find GPIB version 1.30, when i remove in add or remove program, it say that Error removing the GPIB.
I am eagerly waiting for your help.
Thanking You
Yours faithfully
M.vijay

To run a program in batch every month on a particular working day

Hi All,
I have a requirement to run a program in batch every month on the 17th working day.
How can I achieve this?
Thanks in advance.
Ankit

Hi,
1.Create an event in tcode- SM62.
2. write a ABAP program include this function module- RSPC_API_CHAIN_SCHEDULE(This function module is periodic)-> give the periods
or
go to RSPC-->start variant and give time as you want and schedule it according to your time.
Then go to SM37 and select your job and go to job menu -->repeat scheduling
giving time as you want and schedule it as daily
Regards,
Marasa.

Is it possible to run a program in compatibility mode?

I am running 10.7.3, and I am trying to get Mackie Tracktion 3 up and running on my Mac. I've been told tha T3 works on previous version of the Mac OS, but not the last few updates. Is there any way that I can run this program in a compatibility mode, or revert my OS to a version that supports T3? Any help would be greatly appreciated.

Sorry, but that's most likely a problem that Mackie is going to have to help you with. Since the application launches, it's not an issue of the application being PowerPC-only, which has affected many people who've moved to Lion. Mackie's support site is very limited and uninformative, so I can't find any useful suggestions. You might have more luck in Mackie's forums:
http://www.mackie.com/ubbthreads/ubbthreads.php/
Good luck.

Compile and run java programs using batch file

i am using eclipse to run my java programs.How to compile and run those programs using a batch file?

a) just write a batch file, and add it to the project. When you want to run it, go to a command window and invoke it. (There is probably also a way to invoke it from Eclipse)
b) if the project is complicated, take a look at ant. Eclispe knows about ant files.

Batch to open xp mode then run a program inside xp mode

I have a batch file that has to be ran in xp mode and I need a batch file that will open the xp and run the batch file that is on the desktop. My boss insists that it be as easy as one click from windows 7 desktop.

Hi,
Inside xp mode, create a shortcut to your app, under, %allusersprofile%\start menu. A few seconds later, the app short cut gets published on the win7 start menu under Windows Virtual pC"->"windows xp mode applications"
For more information, please read this familiar thread:
https://social.technet.microsoft.com/Forums/windows/en-US/274beeeb-85bb-4741-b251-9e9588a26698/create-shortcut-to-xp-mode-app-from-win7-host
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Run Java program in Hidden mode

Dear friends,
how can I run my JAVA program, so that it is not shown on task-bar list or in task manager list
Thank you

"JWindow or Window will make it not have a taskbar
button or a task list item (in Task Manager)."
I'm sure that if I made an application which has a
JWindow, I will see the javaw.exe task in my task
manager...There are 2 things in Task Manager:
- Applications or Task List
- Process List
JWindow shouldn't show in the first, but any app should show in the second.

How to run Acrobat OCR in batch mode?

I have many pdf files that I need to run OCR on. It is tedious to open each file and run OCR manually. I'm wondering if there is a way to automatically run OCR on all the files.

Use the Batch Sequence (Acrobat 8 or 9) or an Action (Acrobat X) available with Acrobat Pro.
Be well...

Running reports 10g in batch mode in a remote server

Hi all
I have 10g AS and reports servives running in server1. I want to invoke some reports deployed in server1 from another server (server2) and create the output files (PDFs) in server 2.
Is this possible?
Any help is appreciated.

Use the thin client on server2:
http://www.oracle.com/technology/products/reports/htdocs/getstart/examples/Tools/thinclient/thinclient/Readme.html
To put the output on server2 you either have to map a drive to server2 on server1 or ftp the output from server1 to server2.
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_deployment.htm#55

Running PL/SQL in batch mode

I need to run a few PL/SQL procedures at various time of the day and night on an Oracle 8.1.7 database. I do I go about automatically kicking off these procedures at specific times.

DBMS_JOB is Oracle built-in packages owned by SYS.
The following is a list of DBMS_JOB header:
PACKAGE dbms_job IS
any_instance CONSTANT BINARY_INTEGER := 0;
-- Parameters are:
-- JOB is the number of the job being executed.
-- WHAT is the PL/SQL procedure to execute.
-- The job must always be a single call to a procedure. The
-- routine may take any number of hardcoded parameters.
-- Special parameter values recognized are:
-- job: an in parameter, the number of the current job
-- next_date: in/out, the date of the next refresh
-- broken: in/out, is the job broken. The IN values is FALSE.
-- Always remember the trailing semicolon.
-- Some legal values of WHAT (assuming the routines exist) are
-- 'myproc( ''10-JAN-82'', next_date, broken);'
-- 'scott.emppackage.give_raise( ''JENKINS'', 30000.00);'
-- 'dbms_job.remove( job);'
-- NEXT_DATE is the date at which the job will next be automatically run,
-- assuming there are background processes attempting to run it.
-- INTERVAL is a date function, evaluated immediately before the job starts
-- executing. If the job completes successfully, this new date is placed
-- in NEXT_DATE. INTERVAL is evaluated by plugging it into the statement
-- select INTERVAL into next_date from dual;
-- INTERVAL must evaluate to a time in the future. Legal intervals include
-- 'sysdate + 7' -- execute once a week
-- 'NEXT_DAY(sysdate,''TUESDAY'')' -- execute once every tuesday
-- 'null' -- only execute once
-- If INTERVAL evaluates to null and a job completes successfully, then
-- the job is automatically deleted from the queue.
PROCEDURE isubmit ( job IN BINARY_INTEGER,
what IN VARCHAR2,
next_date IN DATE,
interval IN VARCHAR2 DEFAULT 'null',
no_parse IN BOOLEAN DEFAULT FALSE);
-- Submit a new job with a given job number.
PROCEDURE submit ( job OUT BINARY_INTEGER,
what IN VARCHAR2,
next_date IN DATE DEFAULT sysdate,
interval IN VARCHAR2 DEFAULT 'null',
no_parse IN BOOLEAN DEFAULT FALSE,
instance IN BINARY_INTEGER DEFAULT any_instance,
force IN BOOLEAN DEFAULT FALSE );
-- Submit a new job. Chooses JOB from the sequence sys.jobseq.
-- instance and force are added for jobq queue affinity
-- If FORCE is TRUE, then any positive integer is acceptable as the job
-- instance. If FORCE is FALSE, then the specified instance must be running;
-- otherwise the routine raises an exception.
-- For example,
-- variable x number;
-- execute dbms_job.submit(:x,'pack.proc(''arg1'');',sysdate,'sysdate+1');
PROCEDURE remove ( job IN BINARY_INTEGER );
-- Remove an existing job from the job queue.
-- This currently does not stop a running job.
-- execute dbms_job.remove(14144);
PROCEDURE change ( job IN BINARY_INTEGER,
what IN VARCHAR2,
next_date IN DATE,
interval IN VARCHAR2,
instance IN BINARY_INTEGER DEFAULT NULL,
force IN BOOLEAN DEFAULT FALSE);
-- Change any of the the user-settable fields in a job
-- Parameter instance and force are added for job queue affinity
-- If what, next_date,or interval is null, leave that value as-is.
-- instance defaults to NULL indicates instance affinity is not changed.
-- If FORCE is FALSE, the specified instance (to which the instance number
-- change) must be running. Otherwise the routine raises an exception.
-- If FORCE is TRUE, any positive integer is acceptable as the job instance.
-- execute dbms_job.change( 14144, null, null, 'sysdate+3');
PROCEDURE what ( job IN BINARY_INTEGER,
what IN VARCHAR2 );
-- Change what an existing job does, and replace its environment
PROCEDURE next_date ( job IN BINARY_INTEGER,
next_date IN DATE );
-- Change when an existing job will next execute
PROCEDURE instance ( job IN BINARY_INTEGER,
instance IN BINARY_INTEGER,
force IN BOOLEAN DEFAULT FALSE);
-- Change job instance affinity. FORCE parameter works same as in SUBMIT
PROCEDURE interval ( job IN BINARY_INTEGER,
interval IN VARCHAR2 );
-- Change how often a job executes
PROCEDURE broken ( job IN BINARY_INTEGER,
broken IN BOOLEAN,
next_date IN DATE DEFAULT SYSDATE );
-- Set the broken flag. Broken jobs are never run.
PROCEDURE run ( job IN BINARY_INTEGER,
force IN BOOLEAN DEFAULT FALSE);
-- Run job JOB now. Run it even if it is broken.
-- Running the job will recompute next_date, see view user_jobs.
-- execute dbms_job.run(14144);
-- Warning: this will reinitialize the current session's packages
-- FORCE is added for job queue affinity
-- If FORCE is TRUE, instance affinity is irrelevant for running jobs in
-- the foreground process. If FORCE is FALSE, the job can be run in the
-- foreground only in the specified instance. dbms_job.run will raise an
-- exception if FORCE is FALSE and the connected instance is the wrong one.
PROCEDURE user_export ( job IN BINARY_INTEGER,
mycall IN OUT VARCHAR2);
-- Produce the text of a call to recreate the given job
PROCEDURE user_export ( job IN BINARY_INTEGER,
mycall IN OUT VARCHAR2,
myinst IN OUT VARCHAR2);
-- Procedure is added for altering instance affinity (8.1+) and perserve the
-- compatibility
-- Return boolean value indicating whether execution is in background
-- process or foreground process
FUNCTION background_process RETURN BOOLEAN;
END;
null

HR_INFOTYPE_OPERATION - Running in Batch Mode

I have an ABAP which reads data from a flat file into an internal table and then loops through this internal table and updates HR Infotype 15 records via the HR_INFOTYPE_OPERATION function. In my program I give the user the option of running it in a "Test/no comitt" mode so they can verify the data in their data file and then they can run it in an "Update/Commit" mode.
The program itself works great as long as I run it on-line. I catch any errors and report them back to the user before the run it in "Update" mode. This way if their is a problem with any of the data in the data file then they are made aware of this. HOWEVER, if I run this same program in Batch mode it abends if their are any problems at all with any of the records in the data file (ie., employee doesn't exist or whatever). The program just stops and does not give any error message and just indicates that is has Finished by it really hasn't. I can't find anything in OSS notes around this. The program runs fine in Batch as long as the data file is clean and o.k.
Has anyone else had this problem or have any ideas?

Hi Janice
For what its worth, I know its already too late for a reply to this problem, but documenting it so others can see.
We had a number of issues updating infotypes 14 & 15 using HR_INFOTYPE_OPERATION. It works great for 14 but works sporadically when used in conjunction with a BDC logic. Function does not work that well for IT15 together with BDC. The key here is that the BDC logic was used in conjunction to calling the function. We had such a requirement.
Anyway, I debugged the standard code, found some internal buffer clearing modules and used them as well, but that didn't work either. Finally we ended up using just the BDC, without the FM for lack of time and that is working great.
I wanted to put this for the benefit of others who use it. Depending on how you use it, this FM does have some strange problems such as - not returning any error when it failed, performance problems with huge data loads etc.
Thanks,
Anand

Trapping errors when running in batch mode

I use windows scheduler to run several reports in batch mode. Is there a way to continue after an error and capture a error code. I ocasionally get Fetch out of sequence errors which have to be cleared from the screen manually. I need this to automaticly close and return an error code so the report can be re run without user intervention.
Is there a command line switch or registry setting to switch error mesage boxes of.
Regards
Alan

Dbritt26
This is an old story which may have a solution if your program is Premiere Elements 13.
If your program is version 13, then delete or rename the OldFilm.AEX file from OldFilm.AEX to OldFilm.AEXOLD.
That file is found
Local Disk C
Program Files
Adobe
Adobe Premiere Elements 13
Plug-Ins
Common
NewBlue
and in the NewBlue Folder is the OldFilm.AEX file.
Please let us know the outcome.
Thanks.
ATR

Can't Run program in Debug Mode

To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about 50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business Model we
are wondering if Forte is timing out during the partition phase or if the
server partition is running out of memory . The following error messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor", (partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada
-----------------------------------------------

Hi,
We have had the same problem in a non-express application
with a heavy server partition. In our case, the error was not
systematic, depending on the server workload at the time we
tried to partition and run.
The work-around we're using is to put the -fm flags (increasing the x
parameter to say 30000) in the 'server arguments' of your server
partition
properties in the partition workshop. Note that if your server is a Unix
platform,
you need to put double-quotes before and after the parenthesis in the -fm
syntax.
Hope this helps,
Vincent Figari
BTW, what Forte version are you using ?
On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
writes:
>
>
>
>
>
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a
non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about
50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business
Model we
are wondering if Forte is timing out during the partition phase or if
the
server partition is running out of memory . The following error
messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition
testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of
the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more
information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called:
qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means
the
process at the other end of the wire failed. Please go look there
and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition
testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition
testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition
testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition
testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode:
SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada

Is there any way to run signcode.exe program under background mode

Hi everyone,
I am finding the solutions to build the project automatically but the situation is still unchanged. When building the project i have use the signcode tool to sign my .cab files therefore the system shows me the "Enter Private Key Password" dialog and ask me to enter my password into the Password field.
If all you guy have any ways for packing the project by the mechanism of the running signcode program under background mode. Below is my script.
[b]signcode -spc ms.spc -v ms.pvk -n abc.cab -i URL -t http://timestamp.verisign.com/scripts/timstamp.dll abc.cab
Thank you for your ideas and regards
Tan

Hi,
you can use the tool signcode-pwd to automate the signing:
http://www.stephan-brenner.com/blog/?page_id=9

Module Pool in Batch Mode

Hi
Can I run module pool program in batch mode....
If so how.... can anyone help me out.....
Thanks
Jay

hI,
Yes sure I need the help..... how to run in batch process this progra,/// can I go direct and define in sm36 or so....
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
Program
PROGRAM ZASSET .
tables: anla,zasset.
constants :
                         C_O(1) TYPE C VALUE 0,
C_INSERT(10) TYPE C VALUE 'INSERT'.
DATA: IT_ZASSET LIKE ZASSET.
DATA:   V_emp_exist(1) type c,
                                V_ANLN1 like zASSET-ANLN1.
*--For Pf status
data: begin of it_pf occurs 0,
       stat(8) type c,
      end of it_pf.
DATA: SAVE TYPE C,
       DELETE TYPE C,
       CLEAR TYPE C,
       EXIT TYPE C,
       BACK TYPE C,
       CANCEL TYPE C,
       OK_CODE LIKE SY-UCOMM.
*&      Module EXIT INPUT
      text
MODULE EXIT INPUT.
case sy-ucomm.
when 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " EXIT INPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE. "OK_CODE.
WHEN 'INSERT'.
IF NOT ZASSET-ANLN1 IS INITIAL.
MOVE ZASSET-ANLN1 TO IT_ZASSET-ANLN1.
ENDIF.
WHEN 'SAVE'.
MOVE IT_ZASSET-ANLN1 TO ZASSET-ANLN1.
INSERT INTO ZASSET VALUES IT_ZASSET .
COMMIT WORK.
CLEAR IT_ZASSET.
*REFRESH IT_ZASSET.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
*APPEND IT_ZASSET.
*CLEAR ZASSET.
     leave to screen 200.
*ENDIF.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
&      Module STATUS_0100 OUTPUT
        text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ASSET'.
SET PF-STATUS 'POOL'.
SET TITLEBAR 'UPDATING ZASSET TABLE'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module exitscreen INPUT
      text
MODULE exitscreen INPUT.
Case OK_CODE. "_100.
    WHEN EXIT.
      Leave to screen 0.
    when BACK.
      Leave to screen 0.
    when CANCEL.
      Leave to screen 0.
Endcase.
ENDMODULE.                 " exitscreen INPUT
*&      Module USER_COMMAND_0200 INPUT
      text
*OK_CODE = SY-UCOMM.
*MODULE USER_COMMAND_0200 INPUT.
*Case OK_CODE.
When 'MODIFY'.
Perform move_values.
Perform lock_table.
Perform change_dbase.
Perform unlock_table.
Message s999(z1) with text-001.
Leave to screen 100.
When SAVE.
Perform move_values.
Perform lock_table.
Perform insert_dbase.
Perform unlock_table.
Message s999(z1) with text-002.
Leave to screen 100.
When c_delete.
Perform move_values.
Perform lock_table.
Perform delete_dbase.
Perform unlock_table.
Message s999(z1) with text-003.
Leave to screen 100.
When EXIT.
*Endcase.
*ENDMODULE.                 " USER_COMMAND_0200 INPUT
*&      Form check_emp_exist
      text
--> p1        text
<-- p2        text
FORM check_emp_exist.
Clear IT_ZASSET-ANLN1.
Move zASSET-ANLN1 to IT_ZASSET-ANLN1.
Clear zASSET.
Select single * from zASSET where ANLN1 = IT_ZASSET-ANLN1.
If sy-subrc ne 0.
    Clear v_emp_exist.
Else.
    Clear zASSET.
    Select * up to 1 rows from ztrytxn where empno = v_empno.
    Endselect.
    Move : ztrytxn-valfr to v_date,
               C_x to v_emp_exist.
Endif.
ENDFORM.                    " check_emp_exist
*&      Form move_values
      text
--> p1        text
<-- p2        text
*FORM move_values.
**MOVE ZASSET-ANLN1 TO IT_ZASSET-ANLN1.
**MOVE IT_ZASSET-ANLN1 TO ZASSET-ANLN1.
**MOVE ZASSET-ANLN1 TO IT_ZASSET-ANLN1.
*MOVE IT_ZASSET-ANLN1 TO ZASSET-ANLN1.
*INSERT INTO ZASSET VALUES IT_ZASSET.
*COMMIT WORK.
**MODIFY ZASSET . "INDEX SY-TABIX. " FROM TABLE IT_ZASSET1 .
**COMMIT WORK.
**LEAVE TO SCREEN 100.
*ENDFORM.                    " move_values
ENDFORM.                    " change_dbase
*&      Form delete_dbase
      text
--> p1        text
<-- p2        text
FORM delete_dbase.
Delete zASSET from IT_ZASSET-ANLN1.
Commit work.
ENDFORM.                    " delete_dbase
*&      Module check_BUKRS INPUT
      validating bukrs
MODULE check_BUKRS INPUT.
if zasset-bukrs <> 0.
    Message e999(z1) with text-005.
Endif.
ENDMODULE.                 " check_BUKRS INPUT

To run a program in batch mode

Similar Messages

Maybe you are looking for