To stop transfer orders from printing

user has transfer orders printing to a specific printer automatically, were in SAP do you stop the orders from printing automatically.

HI,
Remove print code from your movement type and that should solve your problem.
or (if you do not want to remove the print code) your spool code is responsible for auto printing.
Note down your movement type' s print code and go to OMLV change the specific spool code(auto print) to different spool code which can stop auto print.
Hope this helps
Regards
KK

Similar Messages

  • How to create Transfer order from material document   uFF08Move type is 101uFF09

    Hi all,
    is there any function module, BAPI to create transfer order from a material document number？
    I want to use FM L_TO_CREATE_SINGLE,but the result is "Movement type 101 for manual transfer orders does not exist".
    Is the parameters error？
    Thank you in advance
    Regards

    The error message you get is number 196 from message class L3, do a where-used on it from transaction SE91 and then put a break-point on each line result.  Afterwards, re-execute your function call and see which break-point is hit and investigate from there.
    With that said, you really should be using Bapi BAPI_GOODSMVT_CREATE for all goods movement operations.  It shares code with MIGO and executes the same Badi's and user-exits, so data integrity is not broken.  Don't forget Bapi BAPI_TRANSACTION_COMMIT to commit changes in the database after a successful call.
    cheers

  • How to create Transfer order from material document

    Hi gurus,
         is there any function module, BAPI to create transfer order from a material document number.
    waiting for positive reply.
    thanks
    vinod

    Hi,
    The FM L_TO_CREATE_SINGLE or L_TO_CREATE_MULTIPLE could solve your problem.
    Hope it helps.
    Chang

  • Create Transfer Order from TR - Consignment stock

    Hi,
    I've implemented vendor consignment stock in SAP. However I cannot get it fixed that when an TO is created from an TR that a TO is created for the material which is a part of the consignment stock.
    Is it possible to make a TO automatic (with LT04) that also creates a TO with consignment stock as a source bin?
    Thanks

    Hi,
    Below is a screenshot of the Transfer requirement:
    Item 1 (1100-0002-0000) is a non-consignment material and item 2 (5800-0001-0001) is a consignment material which is stored on a consignment location.
    With Tcode LT04 (Create Transfer Order from TR) it is possible to create a TO for a TR.
    After clicking enter, the following screen appears
    When I click Generate TO Item the system automatically creates a TO for material 1100-0002-0000. However the system cannot create an TO for material 5800-0001-0001. It gives the following screen. With the notice that the system cannot find the source storage bin.
    The goal is that the TO is automatic created (just as for item 1)  for this material. Thus the material can also be picked directly.
    Hope this clarifies the issue.
    Thanks.

  • Stop a job from printing

    Hope Experts how are you today?
             One of our users created a job SD_203_Z_AUTO_DEL.  Everytime this jobs runs it prints out. She would like to stop this job from printing. Is there anything in SM37 job overview that I need to change. If not in SM37 than were do I go. I see that SU01 under Spool Control OutputDevice is QU6, but if I change this than she won't be able to print anything. Sorry for the novice question. I don't spend alot of time in SAP these days........   

    Using transaction SM37, you can select the job from the list and select Job -> Change from the menu.  Select the Step button, which will list the steps in the job.  Select the step (program) that creates the output and select Step -> Change from the menu.  There should be a Print Specifications button at the bottom of the screen.  Select this button and then select the Properties button.  Change the Time of Printing to 'Send to SAP spool' and save all of your entries.

  • How to stop duplicate copy from printing

    Dear All,
                  I have a typical scenario where the duplicate copy is getting printed before some cash movements.I have to stop the form from printing and the driver program is standard 1.can the control set in a smartform not to print if the cash movements are not done???
    i tired using leave program but it stops the total transaction.
    I only want to stop the printing of the smartform.
    Reward points for helpful answers.
    cheers,
    Deepthee.

    Hi Deepthee,
    This post is covering a similar question how to exit outof a smartform?  While it has not been closed yet there may be some suggestions in it you could use.
    Regards,
    Nick

  • Printing of transfer order . error Print indicator 029 not defined.

    Hello everyone.
    I need some help.
    when i run program RLVSD40 (Initiate printing of transfer order).
    i got error.
    Print indicator 029 not defined
    Message no. L3118
    what should i do to solve this error ?
    please help...

    is 029 your warhouse?
    if so then SAP found a record with print indicator "blank" , but this "blank" print indicator is not defined in OMLV.

  • Can't Stop Cover Page from Printing

    Every time a user prints a report, they are getting a cover page as listed below. If there is a way, how can we stop this cover page from printing? Thanka ahead of time.
    ########## User: applmgr@prowvdb1
    ##### Title: JDoe.649719
    ##### Date: Mon 09:35 Aug 20, 2007
    ##### Job: Lazerjet5326_HP-12721
    #####

    Hello,
    This seems to be what is called a "Separator page" in Windows printer driver.
    Separator pages are used at the beginning of each document to make it
    easy to find a document among others at the printer
    On Windows, it is a "Printer Driver" setting
    Regards

  • How to create wave pick document and transfer order from that document

    Hi All,
    I want to create wave pick document based on delivery and correspondingly want to create transfer order for that. My requirement is that if in 3 delivery i have to pick material M1 as 100, 50, 100 qty then when i create wave pick for these deliveries and create Transfer order by this wave pick doc it should pick from single bin of warehouse , currently it is picking from 3 different bins though qty in each bin is more than 250 in each bin. Also suggest me the configuration requred for this.
    Thanks in advance:

    Hello Gordon, tha is working perfect now I finaly get the forecasted items in my MRP window If I click on show recommendations I see he recommends he wants to order some pcs, and Indd what I split in to Buy or Make is separated in an Production order. But how do I change the recommendations into orders?

  • How to stop Officejet 6210xi from printing logs

    We inherited an officejet 6210xi. (No manual.) It is being used standalone as a fax. It now prints a log for each and every fax. This is a huge waste of paper, so how do we stop it from printing a log every time? Thanks.

    Hi,
    May be it is the alignment page. Please perform aligning the printer once as per the steps below and check if helps.
    Follow these steps to open the printer toolbox and align the printer, if you found defects on the print quality diagnostic report.
    1. Load plain white paper in the input tray.
    2. Open HP Solution Center:
    3. Click Settings.
    4. Under Print Settings , click Printer Toolbox . The printer Toolbox opens in a new window.
    5. Click the Device Services tab.
    6. Click Align the Printheads .
    The product aligns the printheads. When the alignment is complete, the product prints an alignment page.
    After the successful alignment, restart the printer and check.
    I work for HP but my posts and replies are my own.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Automatic creation of transfer orders from goods receipt of purchase order.

    Hi experts
    The project i am currently working on requires the following;
    When goods receipting a purchase order i have a requirement for the system to create automatic transfer orders to put the stock away into storage bins.  I am aware that the stock goes straight into the 902 area once goods receipted.  Is it possible to have the transfer orders created automatically out of 902 once the goods receipt has been posted.
    In support of this, i have made an entry in transaction OMKX for the following;
    Reference Movement Type - 101
    Movement Indicator - B (goods movement for purchase order)
    Movement Type - 101
    TR Create Transfer requirement - X
    Immed. TO Creation - A
    Addl Data - X
    Once i receipt the PO it just sits in 902 and does not create any automatic transfer orders.
    Could someone please help me
    Thanks
    Simon

    Please try to process the material document of the GR manually by LT06 in foreground to find out the root cause of the error.
    You may also want to setup the mail control (V_T321-MAILK) for immediate TO creation in OMKX. The system will send you a express message (depending on your setup) if TO creation is failed.

  • How to stop sales orders from contracts from qualifying for Rebates.

    We have set up rebate agreements for customers and they are working as expected.
    Now our sales people want to start using contracts for some special deals for certain customers and products. But they DO NOT want these sales orders from these contracts to qualify for rebates.
    Does anybody know how we can set this up or if it is at all possible?

    Hi Zoya,
    I got one more idea and so try it out.If it sounds foolish please ignore.Instead of going for userexits its better you go for a different sales order type whenever you refer to a contract.And make sure you assign a different pricing procedure which does not contain the condition type BO03 at all.Ofcourse this new sales document should have a different document pricing procedure.
    Regars
    Ravi Kiran

  • Create collective Transfer order from collective outbound del?

    Hello All
    I created a group of deliveries and I got two outbound documents, now I want to create a collective Transfer order it gives me an error “does not exist in T311” however the individual outbound delivery whiten the group could be picked
    Can any one help me to solve this
    Regards
    Jacopo Francois

    hi
    Transfer order will create based on delivery document .  U got two delivery document number.
    So goto LT03
    enter delivery document number
    execute save.
    again goto LT03
    enter another delivery document number execute, save it
    regards
    krishna

  • Transferring data(Transfer Order )  From SAP system to Legacy System

    Hi Friends
    please , help me out
    I Need to Transfer The Transfer Order (LT03) Data To legacy System
    How to create the Idoc on LT03
    Is there a solution for this please..
    Regards..
    null

    Hi Viswa ,
    You need to setup the configure the communication between SAP and legacy.
    EDI will suffice your requirement.
    Regards,
    Madhu.

  • Transfer orders from SNP to ECC

    Hello,
    Could anyone please tell me how to transfer planned orders (production, purchase & transport) from SNP to ECC?
    Thank you in advance for your help.
    David.

    Thank you Senthil for your answer.
    Production orders are now being transfer, but purchase and transport req. we are still having problems.
    We checked sapapo/ccr and there is an error: " CIF 182 - No external number exist in R/3". We still have not figure out what could be the problem. Any ideas of what could be the problem?
    Thanks,
    David
    Edited by: DToron on Sep 10, 2009 5:35 PM

Maybe you are looking for

  • Urgent:Error while importing project in ODI..plz help

    Hi All, We are getting below errors after importing the project folder. In interfaces having file as source datastores, we are getting below errors 1) On source datastore,its giving error that "could not build the property panel for an object". 2) On

  • Can't display any content in safari

    I guess it was after the last update to Mac OSX 10.4.8, my safari stop working any more. The browser stay blank when I open it (actually it's loading the content in the background because if i drag the right bottom corner to resize the window, the co

  • URGENT! Some apps have disappeared

    Hey, So i have recently hooked my iPhone 2G to another computer to "Transfer Purchases" to that computer. Now i randomly have some of my apps missing (Shazam and PocketGod - to name a few). I don't know where they are or what to do. I've tried to uns

  • Nested schema usage in JDeveloper

    We are building a BPEL process that makes use of a schema nested to multiple levels. Some schema types have an extension to other base types. When trying to create variables for such types, JDeveloper throws an error "Problem building schema" with me

  • My iphone says i'm not subscribed to icloud, but i am on my macbookpro

    Using my computer, I transitioned to iCloud last night. When it confirmed my e-mail address, it showed both my @mac.com and @me.com addresses. Now when I try to turn on iCloud on my phone, it tells me I'm not subscribed. Help!