Toast is not redirecting to specific page when phone is locked in windows phone 8 application

I subscribed to toast notifications to my windows phone 8 chat application..
It is redirecting to specific page when i minimize the app and close the app.
But in following scenario it is not redirecting..
I opened app and then i locked the phone.
I got notification then i clicked on toast.
It is not redirecting to that page i specified.
When i look into rootframe_navigating event in app.xaml.cs, i found that the notification uri is not coming when we lock the phone when app is opened.
I hope you understand the scenario.
Is that bug or should i do anything for redirecting when phone is locked also?
Waiting for the reply.
Thanks!
 

I used fast app resume...
That is the reason that it is behaving like that..
I need fast app resume also..
How can i overcome this?

Similar Messages

  • Mozila3.6 not load properly . it is not redirect my action page.When fill my enquiry form.

    Mozila3.6 not load properly . it is not redirect my action page.
    I am submiting my enquiry form that time mozila 3.6 is not work properly .it not load fully .it is not redirect my action page again .it is not load properly .always show done and loding is stope but it is not done .please help.
    This is my web URL and enquiry form: http://kormanmdorg.perfectyourself.net/consultation
    It is work fine in IE and chrome browser .Please check.

    Bad code on the page. The error console reveals:
    Error: document.frm1 is undefined
    Source File: http://kormanmdorg.perfectyourself.net/confirmation.php
    Line: 11

  • Can not redirect to other page when using adfc-config.xml in standalone WL

    Hi all,
    I created a very simple fusion app, only have two jspx pages(view1 view2). I drag these two pages to adfc-config file and created a control flow(adfcView2) between these two pages.
    +<?xml version="1.0" encoding="UTF-8" ?>+
    +<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">+
    +<view id="view1">+
    +<page>/view1.jspx</page>+
    +</view>+
    +<view id="view2">+
    +<page>/view2.jspx</page>+
    +</view>+
    +<control-flow-rule>+
    +<from-activity-id>view1</from-activity-id>+
    +<control-flow-case>+
    +<from-outcome>adfcView2</from-outcome>+
    +<to-activity-id>view2</to-activity-id>+
    +</control-flow-case>+
    +</control-flow-rule>+
    +</adfc-config>+
    When I run the view1.jspx in the embeded WL, all go well, can navigate from view1 to view2.
    But when I created an ear and deployed this ear to a standalone WL, view1 can be displayed successfully, but when I clicked one commandbutton in view1, want to navigator to view2, the page can not be redirected to view2(still show view1.jspx). there is no any error msg in WL Console.
    Did I miss anything for deploying a taskflow app? If I change the view controller to faces-config.xml not adfc-config.xml, all work fine.
    Any info is appreciated.
    Edited by: harth on Oct 25, 2009 7:21 PM

    Hi Harth,
    I guess you are running the jspx page not view activity, check if your url contains .jspx page at the end. If so, run the url without .jspx page at end(which is view id name)
    Eg:
    Give http://<Host_Name>:<Port>/<ContextRoot>/faces/view1 instead of http://<Host_Name>:<Port>/<ContextRoot>/faces/view1.jspxSireesha
    Edited by: Sireesha Pinninti on Oct 25, 2009 8:00 PM

  • When atemping to use wifi hotspots FireFox does not redirect to login page.

    when trying to use a hot spot like in a hotel or airport (tmoble for one) will not redirect to login page. Nor can it find the page when I enter the DNS name. If I enter the IP address of the long in page then it can find it but not the subsequent pages that it calls by DNS.
    == URL of affected sites ==
    http://

    I am a Hotspot ISP and I am having this issue with Firefox on Linux devices. We use Colubris MSC-3300 as access controllers tied to a RADIUS server. Have tested all other browsers on Windows and Linux and they seem to work correctly, problem seems to be tied to Firefox on Linux (testing with Ubuntu 11.04). When I open Firefox the redirect to captive portal page works correcty. I enter my username and password and when it tries to send this information back to the controller I get a "connection was interrupted" error. I have gone into Preferences and turned everything off and/or on and still can't get this device to log in.

  • Redirect users to page when we take system in maintenance mode.

    I would like to redirect users to page when we take system in maintenance mode. We are on 12.1.3 application. please provide me document which have these details

    Please see old threads which discuss the same topic.
    http://forums.oracle.com/forums/search.jspa?threadID=&q=Redirect+AND+Maintenance&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    http://forums.oracle.com/forums/search.jspa?threadID=&q=Maintenance+AND+Message&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    http://forums.oracle.com/forums/search.jspa?threadID=&q=Outage+AND+Maintenance&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Please search the forum before posting similar questions.
    Thanks,
    Hussein

  • Why Firefox do not open quick-luncher page when first open firefox?

    Firefox do not open quick-luncher page when first open firefox.
    but after firefox opened, when i open one new tab page, the quick-luncher page is opened.

    Such JavaScript links should show the image in the same tab, so make sure that you left click such links.
    * http://kb.mozillazine.org/JavaScript
    Try to reload the web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)

  • I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

    I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

    Your previous tabs will not re-open or be available to re-open when starting Firefox if:
    *your previous session was in Private Browsing mode; see --> http://support.mozilla.org/en-US/kb/Private+Browsing
    *you use Clear Recent History (''Firefox button > History > Clear Recent History'' or ''Tools > Clear Recent History''); see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-clear-my-history
    *you clear History automatically when closing Firefox; see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-make-firefox-clear-my-history-automatically
    NOTE: Your third-party Plugins (Add-ons > Plugins) are not in the "Application Basics" (Troubleshooting Information) in the "More system details" of your original post. Third-party Plugins are categorized separately in "Installed Plugins" under "More system details". You should review but not change the Plugins as detected automatically by the software on this forum when posting a question.
    If you problem still exists after checking the above, the problem could be caused by one or more of your Extensions or Plugins:
    *See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    *See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    *See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites.

    I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.

    Hi CMorenoOT,
    This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
    iTunes: How to set up an Apple ID within iTunes
    http://support.apple.com/kb/HT2731
    Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
    - Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
    - Once you've filled out all of the fields for your billing information, tap Next.
    For more information:
    Using an existing Apple ID with the iTunes Store and Mac App Store
    http://support.apple.com/kb/HT2589
    Thanks,
    Matt M.

  • HT5463 Hi I am on an iphone 5 IOS7 and when I look at the 'Silence' setting at the bottom of the Don Not Disturb' screen - then even though all of the settings on that screen are off i.e. not green - the 'Silence' -'Only when iPhone is locked' setting is

    Hi I am on an iphone 5 IOS7 and when I look at the 'Silence' setting at the bottom of the Don Not Disturb' screen - then even though all of the settings on that screen are off i.e. not green - the 'Silence' -'Only when iPhone is locked' setting is tickedP

    Chris thanks for your reply, if none of the Do Not Disturb settings are switched on - then am I right that this setting will have no effect. I.e. I want my phone to ring at all times, so have turned off all of the do not disturb settings

  • How to access to configuration page of the router through the windows phone 7 ?

    Hi all
    I'd like to know if there's a way to access to configuration page of the router through my windows phone 7.
    I usually access the router by laptop as following: "192.168.1.1". but sometimes when I'm on my phone  I need to reboot the router through my phone other then the laptop which is not near me...
    I looked up for applications that should do the work, but unfortunately I got no positive result, so I'm reaching out to this very forum in order to find help and tricks so that I can figure it out
    thank you in advance

    Hi Happydz,
    For help using Windows Phone please post in the Windows Phone forums on
    http://answers.microsoft.com .
    The MSDN Windows Phone Development forums are for developers to discuss writing their own Windows Phone apps.
    That said, I'd expect you could connect to 192.168.1.1 from the phone's browser the same way you would from the laptop's browser.

  • When will eprint come to Windows Phone and Microsoft Skydrive cloud service?

    Does anyone know when will eprint come to Windows Phone 7 and Microsoft Skydrive cloud service?

    As long as you can send an email from your Windows phone, you can already use ePrint.
    You can find more information about ePrint here: http://h30495.www3.hp.com/help#eprint
    Hope this helps.
    I work for HP.

  • PORTAL.Home does not redirect to chosen page.

    Hello All
    I have recently successfully transported my oracle development to another server and unfortunately am left with one rather minor but important problem.
    i have a public page with an SSO portlet on it for a user to login to, however when i goto administer and change the default page, a user is still referred to the default Top-level site if no session is opened. and clicking home still does not redirect. I was wondering if anyone could tell me the table where the URL for PORTAL.home is kept so I could edit it manually as it seems the webform is not working. or is it possible to safely deny/delete the builder design time pages completely for client side deployment?
    Many Thanks
    James

    Sorry forgot to state i am working on portal 10.1.4 with DB on 10.1.0.5.

  • SSRS Table/Row Header does not repeat on every page when exported to PDF

    Hi, I have a SSRS Report in which the rows are grouped and the Tablix has a Table/Row header. I wanted the header to repeat on every page for a group because sometimes the data from the group would be more than one page.
                                   To achieve this
                                   - I went to Advance mode by clicking the arrow next to column group
                                   - Selected the Header Static column from Row Group
                                   - Changed the following properties
                                                    - KeepWithGroup: After
                                                    - RepeatOnNewPage:
    True
                                                    - The header columns
    are set to not grow.
    The problem only occurs when the nested grouped data in one of the columns goes over a page. The following pages don't have any header.
    So half of the time the header row repeats but when the nested grouped data extends over one page the header does not show. Problem only occurs when rendered to pdf.
    I found this line "Headings are repeated on each page only if there is sufficient room" in SQL 2008 version. But I could not find it in later versions of sql server. So does that mean it is fixed

    Hi Mumblesnz1,
    According to your description, you specify value of RepeatOnNewPage as True in the report. When exporting the report to PDF, one grouped data extend over one page, and tablix header display on first page, not repeat on following pages.
    As we tested in our environment(SQL Server 2008(SP3)-10.0.5520.0(X64)), it works as you required. We set KeepWithGroup as After and RepeatOnNewPage as True. After exporting to PDF, the grouped data display on two pages, and tablix header repeats on each
    page. Since we haven’t found any document mentioned this issue is fixed on which version, I suggest you try to install the service pack 3 for sql server 2008.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu

  • Unpredictable crash: not associated with specific pages. script:chrome/global/content/bindings/browser.xml.0

    Firefox is open, website working as expected - without warning entire programme freezes. nothing moves - on occasion even my mouse pointer freezes.
    the notice that appears in a drop-down says
    script:chrome/global/content/bindings/browser.xml.0
    I wonder if this 'chrome' refers to the underlying google product [which I have not installed].
    There is absolutely no reason why this should happen - it is not any one specific site, and it happens without warning on sites I have previously visited often, without any problem.

    Thank you for this: it is teaching me a lot about Firefox. I wonder whether there are any obvious suspects among the add-ons listed below? with a Mac, I have the basic ones and nothing exotic - nothing added recently, unless it is an update within the latest issue?
    Firefox 3.6.8
    Mac OS X 10.4
    * Gecko default plugin
    * Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Java Information.
    * RealPlayer Plugin
    * iPhoto6
    * Office Live Update v1.0
    * 3.0.40818.0
    * Adobe Shockwave for Director Netscape plug-in, version 11.5.2
    * The Flip4Mac WMV Plugin allows you to view Windows Media content using QuickTime.
    * The Google Earth Plugin allows you to view 3D imagery and terrain in your web browser.
    * The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site.
    * Shockwave Flash 10.1 r82

  • When I open Firefox to my home page then go to a secomd page firefox does not remember my home page when I try to go back to my home page by using the back button

    When I open up Firefox it goes to my home page, then I surf the web but when I go the the back button it shows my history but not my home page (or the first page I went to).

    Do you get the same two tabs when you launch a new window (Command+n) or only at startup?
    You may want to check your extensions in case something snuck in. You can review and disable those on the Add-ons page. Either:
    * Command+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Extensions. Then, if in doubt, disable.
    Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
    Does that shut down the extra page?

Maybe you are looking for