Toggle switches with if else

I am trying to toggle various switches based off of others and am wondering how I can go about this. For example, if switch A is on, B should toggle off. If I toggle B on, A should toggle off. Any help in doing this would be appreciated. Thanks.

Thank you for an easy question.....
There's a mode in the Switch options that allows you to create a single switch with two channels, where only one will be on.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Similar Messages

Can we have 3 way vertical toggle switch, with unstable position at top, neutral position in center and stable position at bottom. the shape of the switch should be same as that of vertical toggle switch.

can we have 3 way vertical toggle switch, with unstable position at top, neutral position in center and stable position at bottom. the shape of the switch should be same as that of vertical toggle switch.

Avon,
You've asked the same question and received several replies in two recent threads here and here.
Rather than start a third thread, it would be best to just respond in one of them with details as to your problems with the proposed solutions (e.g. use of picture control).
=====================================================
Fading out. " ... J. Arthur Rank on gong."

My apple ID switched with someone else's how can I log on to my apple ID on my I pad

I was transferring some music to my I pad on someone's computer at first It was working well but then none of my apps worked me and my friend found out my IPad was now under their apple ID and not mine how can I change it back to mine?

If you are trying to udpate apps that your friend bought with his ID - then you have to use his ID to update the apps forever. Purchased content is always tied to the ID that was used to buy it.
What are you trying to do? Did you try restarting the device to see if the changes will take effect?
You did make the changes in the app store like I suggested? You can also make those same changes in iTunes on the iPad. Tap on the Music tab in iTunes on the iPad and change the ID in the bottom left corner in there as well.

3 way vertical toggle switch

can we have 3 way vertical toggle switch, with unstable position at top, neutral position in center and stable position at bottom

If you want something that looks a bit more like the standard switches, I've made some that use the picture control.
If you're interested, you can read a bit more and download them here.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Exiting the VI and closing it with a front panel toggle switch

I am developing a Data logging application by plotting a four channels on a Chart.
What I would like to do is this :
- Like any Windows application, as soon as the user double clicks the short cut to the VI, it should the load VI, run and wait for him to start the plotting for which there is a toggle switch. No problem here.
- And the other toggle switch called "EXIT" when operated, should close the VI application ( equivalent to clicking the "X" button on the title bar.
How to do this LV7 full development system?
Thanks
Raghunathan
Raghunathan
LV2012 to Automate Hydraulic Test rigs.

Your situation is different, because you have a toplevel VI. (remember, it says "Open front panel if called THEN close afterwards if originally closed.) A toplevel VI is not "called"!
If you want it to "run when opened", use the checkbox in the execution menu of VI options.
Put a TRUE boolean diagram constant near the right border of your outermost loop, place a "Quit LabVIEW" outside all loops, and wire them together.
LabVIEW Champion . Do more with less code and in less time .

Still no sound with toggle switch moved

I check thed toggle switch, it is not orange, still no sound on anything.

1. If you have no sound at all, even in the Music App, try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
2. If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
3. If you still have no sound at all in any app or for notifications, keyboard clicks, etc. ....try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.

HT201398 FaceTime & Messages now won't open on my iPad. Now no toggle switch in settings. Log in with my Apple ID sends activation error message 'try again'. Both Apps work on my iPhone & Mac.Any help?

FaceTime & Messages now won't open on my iPad. Now no toggle switch in settings. Log in with my Apple ID sends activation error message 'try again'. Both Apps work on my iPhone & Mac.Any help?

Adjusting the date or time didn't do anything for me either. I'm guessing my two options are to either do the full restore from scratch and not apply any backup ... Or possibly wait for an iOS update that might resolve this issue.
I'm not that much of an avid twitter user that I need it implemented natively in all my devices - so for now I'll probably value all my game save data, internal settings in apps e.t.c. over that functionality (or over the amount of work it would be to get me back to where I am now after a full wipe). I'll see what happens after the next iOS delta update. I'll reevaluate the full wipe after that if the issue hasn't been resolved

Trouble with mirroring - no toggle switch

Need some help here...
Just set up Apple TV (running 4.4.3). Using my iPad 2 (running 5.0.1). After selecting the AirPlay button, I can choose Apple TV but the toggle switch to mirroring on/off does not appear. That said, I can see youtube videos on my TV and hear them fine but that's it.
Past posts say to upgrade the Apple TV software using a wire from AppleTV to iTunes on your computer. That was generally for folks having trouble getting their Apple TV software to go from 4.3 to 4.4 - but I have 4.4.3 running.
What's the best next step or steps?

I've been having this same problem for over a year now. When I install some software that requires restart, my Mac hangs in "restart mode", with the light on, just like you described. A double clicking sound plays emenated from the Mac over and over, and doesn't stop until I force shut down the Mac, by holding in the power button. When I start up again, the new software may not have been properly installed, so I can't properly troubleshoot anything.
I've read about this problem in the past, but never learned much about the cause, or how to fix it.

TS3274 My Ipad display is stuck on portrait mode. I tried the toggle switch, turning off and restart and just now backed up into Itunes and restored and still is stuck on portrait mode and it won't flip to landscape mode. Is this a hardware problem?

My Ipad display is stuck on portrait mode. I tried the toggle switch, turning off and restart and just now backed up into Itunes and restored and still is stuck on portrait mode and it won't flip to landscape mode. Is this a hardware problem?

Has lock rotation been accidentally enabled within the control centre? If you swipe up the screen is there a circle with a lock symbol & if so is is greyed out or white - if white it is enabled.

Disable Or Remove Extensions in Safari Open Safari. Click the Safari button, and then click Preferences. Under Preferences, click Extensions, and then do one of the following: To disable ALL extensions, click the toggle switch from ON to OFF. To disable a

I FINALLY FOUND A WAY TO UNINSTALL "COUPON-DROP-DOWN" ANNOYING POP-UPS.
Disable Or Remove Extensions in Safari
Open Safari.
Click the Safari button, and then click Preferences.
Under Preferences, click Extensions, and then do one of the following:
To disable ALL extensions, click the toggle switch from ON to OFF.
To disable a single extension, click it, and then uncheck the Enable box.
To remove a single extension, click it, and then click the Uninstall button.
Click the X in the top right.

Hello Wontsey & Welcome
On 6-4-06 I installed Norton Internet Security 3.0.1 for Mac. I thought maybe my problem was related to the firewall part so I unistalled it and turned the Apple firewall that came with the computer back on.
This did not help. In fact, when I try to open “Help” from the desktop menu the program opens and then immediately closes so I can’t access it.
I hate to have to tell you this Norton is the problem, looking into uninstalling it, the uninstallers that came with it are not effective so no matter you do not have the CD/DVD go to their site to get the Uninstaller
UseCocktail or OnyXto find the invisable files. Just follow Macjacks directive.
This is covered in this Topic thread,abandoning Norton Internet Security see the files Macjack speaks of in the topic thread. If you have questions post in the same forum a new topic this thread is archive, click on the link and then click"back to topic list". This is why i first came to Apple discussions, to get help with the mess Norton can make on Panther and found help as you will. It is not a Safari issue per say, rather a Norton problem.
Best of luck.
Regards; )
Eme~

Nano (2nd generation) won't recognize toggle switch

My iPod Nano (2nd generation) won't recognize the toggle switch. I've done ALL of the suggested remedies...reboot...restore factory settings...reboot plugged into a power source....nothing works.
iTunes recognizes the Nano (thus I was able to restore factory settings) and I'm able to manipulate all of the settings while in iTunes, but the Nano doesn't seem to recognize the toggle switch. I after rebooting, I can get to the first screen asking which language, but the lock icon is showing that it's in the locked position no matter how much I toggle it on and off. Since the toggle is always in the locked position, the only thing I can do with the scroll wheel is reboot.
I have no idea what to try next.
Help?

Sorry I could not have brought better news. I still have an 80 GB iPod Video that I feel the same about!
B-rock

Why does Airplay "mirror" toggle switch fail to appear on iPad and Mac

...but does so with my iPhone when trying to view on apple tv.
Thank you in advance. My first use of apple tv...primarily for airplay "mirroring" feature using iPad
Issue: iPad 1 (5.1.1) with apple tv (software 5.1.1 / 5433)...after swiping iPad to expose airplay, I have no mirror function "toggle" that appears. I can only tap either iPad or Apple TV, but again, no toggle switch displays when selecting Apple TV.
The same issue with my Mac Pro (10.7.5).
However, my iPhone 5 (6.0.1) mirrors perfectly with the apple tv.
Note, Home share is working fine.
best regards,
Don

The iPad 1 does not support mirroring at all. Nor does your Mac Pro when running 10.7.5; Mirroring via AirPlay came only with OS X 10.8 Mountain Lion.
http://support.apple.com/kb/HT5209
http://support.apple.com/kb/HT5404
Regards.

My sound has disappeared-what position should the toggle switch be in? Also my e-mails sticks a lot of the time.

My sound has disappeared - what position should the toggle switch be in? Also, my e-mail sticks a lot of the time, same old problem, no solutions.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

Link switches with fiber.

I have two cisco switches with 2 GBIC ports each. I want to link them with fiber.
I have two ws-g5484 that was gave to me. What else do I need to link these switches?
Do I need media converters and if so how many.
Thank You
Bo Hunter

Media converters are necessary only when your switch does not have the correct fiber interface available.
Make sure the GBIC you have is compatible with your switch using the link below.
GE GBIC Compatibility Matrix
<http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html>
Also, make sure your fiber is multimode (MMF) and that the link length meets the specs outlined in the data sheet, based on the fiber type:
GE GBIC Data Sheet
http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6577/product_data_sheet09186a008014cb5e.html
Let us know if you have additional questions.
Tom

How can i control a toggle switch manually and automatically?

Hello,
I want to know how can it be possible to automatically flip a toggle switch when data comes in.
I know this can be done manually, but what about automatically, without any user?

I would suggest to place the booleans into a 2D array, less things to shuffle.
See attached example (LabVIEW 7.0)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
SWITCHES01.vi ‏41 KB

Toggle switches with if else

Similar Messages

Maybe you are looking for