Tomcat server remains started after shutdown

i was using tomcat sucessfully few daysn back.but now it is not shutting down even after giving command.
some new things i noticed are
* tomcat window that appears at the begning closes now while startup
* after shutdown command, it shows some exceptions(errors)
i am able to launch what i want but it is not closing.so plz tell me how to overcome this.tahnks in advance

* after shutdown command, it shows some
exceptions(errors)You never mentioned (or bothered to mention) the
exception. Post that with the complete stack trace.i thought it to be a usual problem ok here is exception
Catalina.stop: java.net.ConnectException: Connection refused: connect
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:295)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:161)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:148)
at java.net.Socket.connect(Socket.java:425)
at java.net.Socket.connect(Socket.java:375)
at java.net.Socket.<init>(Socket.java:290)
at java.net.Socket.<init>(Socket.java:118)
at org.apache.catalina.startup.Catalina.stop(Catalina.java:581)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:402)
at org.apache.catalina.startup.Catalina.process(Catalina.java:180)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:203)
my opinion:i think it is finding tomcat already stop.that's why it is showing this .but in this case file should not launch in browser but it is launching that means tomcat is running .so ! where is the problem

Similar Messages

  • Server not starting after kernel upgrade

    Hi,
    I did a SAP Kernel upgrade of Patch 146 in NW2004s Unicode system
    After the kernel upgrade, the SAP is not starting
    Pls let me know of what can be teh reason
    The following is dev_disp file
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        BWS
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    146
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        2204
    Mon Jun 16 13:02:04 2008
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 2204) [dpxxdisp.c   1243]
         shared lib "dw_xml.dll" version 146 successfully loaded
         shared lib "dw_xtc.dll" version 146 successfully loaded
         shared lib "dw_stl.dll" version 146 successfully loaded
         shared lib "dw_gui.dll" version 146 successfully loaded
         shared lib "dw_mdm.dll" version 146 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3901
    Mon Jun 16 13:02:09 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >WDBSSAPBWS01_BWS_01                     <
    DpShMCreate: sizeof(wp_adm)          23680     (1480)
    DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)          552080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000EE80050, size: 6347104)
    DpShMCreate: allocated sys_adm at 000000000EE80050
    DpShMCreate: allocated wp_adm at 000000000EE82150
    DpShMCreate: allocated tm_adm_list at 000000000EE87DD0
    DpShMCreate: allocated tm_adm at 000000000EE87E30
    DpShMCreate: allocated wp_ca_adm at 000000000F3EBCD0
    DpShMCreate: allocated appc_ca_adm at 000000000F3F1A90
    DpShMCreate: allocated comm_adm at 000000000F3F39D0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000F47A660
    DpShMCreate: allocated gw_adm at 000000000F47A6E0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000F47A710
    DpShMCreate: allocated wall_adm at 000000000F47A720
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 3496
      argv[0] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
      argv[2] = pf=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=65000
      argv[5] = -DSAPSYSTEM=01
      argv[6] = -DSAPSYSTEMNAME=BWS
      argv[7] = -DSAPMYNAME=WDBSSAPBWS01_BWS_01
      argv[8] = -DSAPPROFILE=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1633]
    ***LOG Q0K=> DpMsAttach, mscon ( WDBSSAPBWS01) [dpxxdisp.c   11822]
    DpStartStopMsg: send start message (myname is >WDBSSAPBWS01_BWS_01                     <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpJ2eeLogin: j2ee state = CONNECTED
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 146
    Release check o.K.
    Mon Jun 16 13:02:11 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 340
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2447) [nixxi.cpp    4424]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3496)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Mon Jun 16 13:02:49 2008
    ERROR => DpHdlDeadWp: W0 (pid 3504) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W1 (pid 3380) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W2 (pid 4348) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W3 (pid 3528) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W4 (pid 4528) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W5 (pid 4360) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W6 (pid 788) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W7 (pid 4432) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => DpHdlDeadWp: W8 (pid 3376) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => DpHdlDeadWp: W9 (pid 3632) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => DpHdlDeadWp: W10 (pid 3928) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W11 (pid 3304) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W12 (pid 3316) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W13 (pid 4956) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => DpHdlDeadWp: W14 (pid 1136) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => DpHdlDeadWp: W15 (pid 4968) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=481
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Jun 16 13:02:59 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Mon Jun 16 17:02:59 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     3504 Ended         no      1   0        0                                                                         
    1 DIA     3380 Ended         no      1   0        0                                                                         
    2 DIA     4348 Ended         no      1   0        0                                                                         
    3 DIA     3528 Ended         no      1   0        0                                                                         
    4 DIA     4528 Ended         no      1   0        0                                                                         
    5 DIA     4360 Ended         no      1   0        0                                                                         
    6 DIA      788 Ended         no      1   0        0                                                                         
    7 DIA     4432 Ended         no      1   0        0                                                                         
    8 UPD     3376 Ended         no      1   0        0                                                                         
    9 ENQ     3632 Ended         no      1   0        0                                                                         
    10 BTC     3928 Ended         no      1   0        0                                                                         
    11 BTC     3304 Ended         no      1   0        0                                                                         
    12 BTC     3316 Ended         no      1   0        0                                                                         
    13 BTC     4956 Ended         no      1   0        0                                                                         
    14 SPO     1136 Ended         no      1   0        0                                                                         
    15 UP2     4968 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Mon Jun 16 17:02:59 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    5
    5
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     6 ( 75%),  shm     2 ( 25%)
    since last update     total     8,  udp     6 ( 75%),  shm     2 ( 25%)
    Dump of tm_adm structure:               Mon Jun 16 17:02:59 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Mon Jun 16 17:02:59 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=481
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Jun 16 13:03:04 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >WDBSSAPBWS01_BWS_01                     < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (1724) (SOFT_KILL)
    Stop icman
    killing process (2860) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:1724  HANDLE:448)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=481
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Jun 16 13:03:05 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:1724  HANDLE:448)
    wait for end of icman
    [DpProcDied] Process lives  (PID:2860  HANDLE:456)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=481
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Jun 16 13:03:06 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2860  HANDLE:456)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=481
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Jun 16 13:03:07 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2860  HANDLE:456)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=481
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Jun 16 13:03:08 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2860  HANDLE:456)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=481
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Jun 16 13:03:09 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2860  HANDLE:456)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=481
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Jun 16 13:03:10 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2860  HANDLE:456)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=481
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Jun 16 13:03:11 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2860  HANDLE:456)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=481
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Jun 16 13:03:12 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2860  HANDLE:456)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=481
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Jun 16 13:03:13 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2860  HANDLE:456)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=481
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Jun 16 13:03:14 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2860  HANDLE:456)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=481
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Jun 16 13:03:15 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2860  HANDLE:456)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=481
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Jun 16 13:03:16 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:2860  HANDLE:456)
    [DpProcDied] Process died  (PID:3496  HANDLE:432)
    DpStartStopMsg: send stop message (myname is >WDBSSAPBWS01_BWS_01                     <)
    NiIMyHostName: hostname = 'WDBSSAPBWS01'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 3 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 3 (r)
    NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    Mon Jun 16 13:03:17 2008
    NiIPeek: peek for hdl 3 timed out (r; 1000ms)
    NiIRead: read for hdl 3 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12168]
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
    SiSelNSet: set events of sock 364 to: ---
    NiBufISelRemove: remove hdl 3 from set0
    SiSelNRemove: removed sock 364 (pos=3)
    SiSelNRemove: removed sock 364
    NiSelIRemove: removed hdl 3
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/16
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 3 / sock 364
    NiBufIClose: clear extension for hdl 3
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 2204) [dpxxdisp.c   10421]
    Good Bye .....

    Are you sure the Database and the listeners are up and running?

  • Re Post: Http server cannot start after running the following JSP

    Hi,
    I have 9iAS 1.0.2.2 and it has been working fine.
    My http server was running fine until I ran the following Jsp. Now I cannot start the Http server at all.
    I check the Oracle home and the path and make sure they match (i.e. if my Oracle Home is iSuites, I have the PATH variable: c:\oracle\isuites\bin as the 1st one. And I reboot the system after I changed the Oracle Home, check the PATH variable etc.)
    I also check the oci.dll files, and I have the oci.dll file in the following directories:
    c:\oracle\ora81\BIN 87KB
    c:\oracle\806\BIN 38KB
    c:\oracle\iSuites\BIN 87KB
    I check the Registry (regedit) and found that I have ORACLE_HOME_KEY for ora81 home, iSuites home, but not
    806 home. And there are oracle.key files in c:\oracle\ora81\bin, c:\oracle\806\bin, c:\oracle\isuites\bin .
    The contents of oracle.key in c:\oracle\ora81\bin and c:\oracle\isuites\bin are correct (i.e. "Software\ORACLE\HOME0" "Software\ORACLE\HOME2" respectively.) However, the content in c:\oracle\806\bin is "Software\ORACLE" .
    Will this be a problem because there is no corresponding ORACLE_HOME_KEY for 806 in regedit?
    OR
    the OCI.DLL file is corrupted in one of the above directory.
    Below is the JSP code that I ran. Before that, my HTTP server is started correctly.
    I really appreciate if someone could give me some pointers about this.
    I also suspect that when the HTTP server was brought down for some reasons and it was not a clean shutdown.
    So how can I shutdown the http server cleanly before restarting that?
    Thanks;
    Kelly.
    <%@ page language="sqlj"
    import="sqlj.runtime.ref.DefaultContext,oracle.sqlj.runtime.Oracl
    e" %>
    <HTML>
    <HEAD> <TITLE> The SQLJQuery JSP </TITLE> </HEAD>
    <BODY BGCOLOR="white">
    <% String empno = request.getParameter("empno");
    if (empno != null) { %>
    <H3> Employee # <%=empno %> Details: </H3>
    <%= runQuery(empno) %>
    <HR><BR>
    <% } %>
    <B>Enter an employee number:</B>
    <FORM METHOD="get">
    <INPUT TYPE="text" NAME="empno" SIZE=10>
    <INPUT TYPE="submit" VALUE="Ask Oracle");
    </FORM>
    </BODY>
    </HTML>
    <%!
    private String runQuery(String empno) throws
    java.sql.SQLException {
    DefaultContext dctx = null;
    String ename = null; double sal = 0.0; String hireDate = null;
    StringBuffer sb = new StringBuffer();
    try {
    dctx = Oracle.getConnection("jdbc:oracle:oci8:@", "scott",
    "tiger");
    #sql [dctx] {
    select ename, sal, TO_CHAR(hiredate,'DD-MON-YYYY')
    INTO :ename, :sal, :hireDate
    FROM scott.emp WHERE UPPER(empno) = UPPER(:empno)
    sb.append("<BLOCKQUOTE><BIG><B><PRE>\n");
    sb.append("Name : " + ename + "\n");
    sb.append("Salary : " + sal + "\n");
    sb.append("Date hired : " + hireDate);
    sb.append("</PRE></B></BIG></BLOCKQUOTE>");
    } catch (java.sql.SQLException e) {
    sb.append("<P> SQL error: <PRE> " + e + " </PRE> </P>\n");
    } finally {
    if (dctx!= null) dctx.close();
    return sb.toString();
    %>

    I had this problem and the pkgchk mentioned above helped to get the admin server going (thanks!) but I could not run the admin console. I saw:
    Exception in thread "main" java.lang.UnsupportedClassVersionError: org/GNOME/Accessibility/JavaBridge (Unsupported major.minor version 49.0)
    It turned out that something (I suspect the patch) had replaced my java1.5.0_06 binary with a java1.4.2_03 binary - but left the java1.5 directory structure alone! i.e. looking in /usr/jdk would have indicated that java1.5 was installed, but when I ran jdk1.5.0_06/bin/java -version , it reported java version "1.4.2_03". I was unimpressed.
    I ended up removing all the SUNWj5* packages and reinstalling them and then I could start the admin console.
    Now to find out what other damage this patch might have caused.....

  • Http server cannot start after running the following JSP

    Hi,
    I have 9iAS 1.0.2.2 and it has been working fine.
    My http server was running fine until I ran the following Jsp. Now I cannot start the Http server at all.
    I check the Oracle home and the path and make sure they match (i.e. if my Oracle Home is iSuites, I have the PATH variable: c:\oracle\isuites\bin as the 1st one. And I reboot the system after I changed the Oracle Home, check the PATH variable etc.)
    I also check the oci.dll files, and I have the oci.dll file in the following directories:
    c:\oracle\ora81\BIN 87KB
    c:\oracle\806\BIN 38KB
    c:\oracle\iSuites\BIN 87KB
    I check the Registry (regedit) and found that I have ORACLE_HOME_KEY for ora81 home, iSuites home, but not
    806 home. And there are oracle.key files in c:\oracle\ora81\bin, c:\oracle\806\bin, c:\oracle\isuites\bin .
    The contents of oracle.key in c:\oracle\ora81\bin and c:\oracle\isuites\bin are correct (i.e. "Software\ORACLE\HOME0" "Software\ORACLE\HOME2" respectively.) However, the content in c:\oracle\806\bin is "Software\ORACLE" .
    Will this be a problem because there is no corresponding ORACLE_HOME_KEY for 806 in regedit?
    OR
    the OCI.DLL file is corrupted in one of the above directory.
    Below is the JSP code that I ran. Before that, my HTTP server is started correctly.
    I really appreciate if someone could give me some pointers about this.
    Thanks;
    Kelly.
    <%@ page language="sqlj"
    import="sqlj.runtime.ref.DefaultContext,oracle.sqlj.runtime.Oracl
    e" %>
    <HTML>
    <HEAD> <TITLE> The SQLJQuery JSP </TITLE> </HEAD>
    <BODY BGCOLOR="white">
    <% String empno = request.getParameter("empno");
    if (empno != null) { %>
    <H3> Employee # <%=empno %> Details: </H3>
    <%= runQuery(empno) %>
    <HR><BR>
    <% } %>
    <B>Enter an employee number:</B>
    <FORM METHOD="get">
    <INPUT TYPE="text" NAME="empno" SIZE=10>
    <INPUT TYPE="submit" VALUE="Ask Oracle");
    </FORM>
    </BODY>
    </HTML>
    <%!
    private String runQuery(String empno) throws
    java.sql.SQLException {
    DefaultContext dctx = null;
    String ename = null; double sal = 0.0; String hireDate = null;
    StringBuffer sb = new StringBuffer();
    try {
    dctx = Oracle.getConnection("jdbc:oracle:oci8:@", "scott",
    "tiger");
    #sql [dctx] {
    select ename, sal, TO_CHAR(hiredate,'DD-MON-YYYY')
    INTO :ename, :sal, :hireDate
    FROM scott.emp WHERE UPPER(empno) = UPPER(:empno)
    sb.append("<BLOCKQUOTE><BIG><B><PRE>\n");
    sb.append("Name : " + ename + "\n");
    sb.append("Salary : " + sal + "\n");
    sb.append("Date hired : " + hireDate);
    sb.append("</PRE></B></BIG></BLOCKQUOTE>");
    } catch (java.sql.SQLException e) {
    sb.append("<P> SQL error: <PRE> " + e + " </PRE> </P>\n");
    } finally {
    if (dctx!= null) dctx.close();
    return sb.toString();
    %>

    Hi Jim,
    I have the same environment with almost similar problem, no IIS services being started, but HTTP_Server still failed to start. Below log:
    +10/09/28 23:35:04 Start process+
    +[Tue Sep 28 23:35:06 2010] [warn] pid file c:/oracle/frhome_1/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous+
    Apache run?
    ap_spawn_child: Bad file descriptor
    Couldn't fork child for piped log process
    Regards,
    Chai
    Edited by: user13350226 on Sep 28, 2010 9:14 AM

  • 770-G45 wont start after ShutDown

    Recently installed MSI 770-G45, problem starts when i regulary shutdown comp. from WinXP or Win7 64-bit.Computer wont start after that, like ther is no power, fans dont spin, no bips, NOTHING. I got to unplug power cord and plugg it again into psu, after that it starts normaly.
    Strange thing is that computer starts normally when i manualy shutdown system(holding the power button on the case).There is no exception, starts perfectly evry time after manual shutdown, no need to unplugg powercord.
    Rest of my components> Phenom II X2 555BE, Kingston 2GB 1333mhz, Sapphire 5770, HDD WD 250gb,PSU Corsair TX 650w.
    Tried to change power cord, tried other PSU, other case (tought its maybe power button but no), changed mobo battery, installed several OS versions (XP, Win7) and still dont have solution.
    MS 7599 ver. 2.0
    Bios version 10.2
    MoBo is new bought it 3 days ago.
    PLEASE HELP!!!!!

    First: It is important to clear CMOS after a BIOS update. Unplug power cable before the clearing, as there can be no power in the system
    Second: Rebuild the system, but outside the case. Use only PSU, motherboard, processor, one stick of memory and graphics card. If it works better then, you may have a short, from a stand-off too many, or poorly isolated wire somewhere.
    But I second it sounds like a motherboard problem. You'd better contact the one who sold it to you.
    Oh, an oldie thing! You will need to install Windows again, with the new motherboard and all.

  • Application Server cannot start after restart

    Dear all,
    I have a database cluster with SAP CI running on 2 servers(on SAN), plus 4 applications.
    Today we have restarted all the servers, and found that only 1 server with database server and application server (w/CI) can start.  All other applications servers cannot start, and in SAP Management Console, it does not show the SAP Instance.
    Another problem is that the database cluster cannot move to another server, with error:
    "initerrlog: Could not open error log file 'M:\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'. Operating system error = 3(The system cannot find the path specified.)."
    Can anyone provide any assistant?  Many thanks!
    Regards,
    Daniel

    Hi Yaroslav,
    In Application Server, Not started.
    Log(1):
    The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAP Service SAP???_?? has been stopped successfully..
    Log(2):
    The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Initialization failed. Service not started. [ntservmain.cpp 1269].
    Log(3):
    The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile
    sapgrp\sapmnt\PRD\SYS\profile\START_D21_sapapp1. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 902].
    For SQL Server(The one which Cluster cannot move group to):
    Log(1):
    The description for Event ID ( 35712 ) in Source ( SAPPRD_01 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event:  ,  ,  ,  ,  ,  ,  ,  ,  ,  , r, e, c, v, 1, 0, 0, 5, 4,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , N, i, I, R, e, a, d, r, e, c, v,  ,  ,  , n, i, x, x, i, ., c, p, 4, 2, 4, 5, , , , , , , , , , , , , , , , , , , , , , , , , , ,           recv10054                   NiIReadrecv   nixxi.cp4245.
    Log(2):
    The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAP Service SAP???_?? has been stopped successfully..
    Log(3):
    The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Initialization failed. Service not started. [ntservmain.cpp 1269].
    Log(4):
    The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile
    sapgrp\sapmnt\PRD\SYS\profile\START_D20_sapdb2. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 902].
    Regards,
    Daniel

  • J2EE on Windows App server wont start after JSPM patching

    Hi,
    I've patched an ECC6 system on DB2 V5R4 to SP16 level on ABAP side, and Enhancement pack 3, and then did an update to JSPM and installed new SP16 levels of the Java components.
    Now my Windows App server starts only the ABAP Work processes, not the J2EE side. I get a yellow light and the message
    J2EE Status info unavailable.
    On the Windows work directory for Dialog instance D00, I see that the dev_server0 has only messages about the last shutdown 2 days ago.
    The dev_jcontrol has errors in it abot Unknown property and
    JStartupICheckFrameworkPackage: can't find framework package U:\usr\sap\WFD\D00\exe\jvmx.jar
    see below.
    Any ideas?
    regards
    Michael.
    trc file: "U:\usr\sap\WFD\D00\work\dev_jcontrol", trc level: 1, release: "700"
    node name   : jcontrol
    pid         : 2308
    system name : WFD
    system nr.  : 00
    started at  : Thu Sep 25 15:46:00 2008
    arguments       :
           arg[00] : U:\usr\sap\WFD\D00\exe\jcontrol.EXE
           arg[01] : pf=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
           arg[02] : -DSAPSTART=1
           arg[03] : -DCONNECT_PORT=64990
           arg[04] : -DSAPSYSTEM=00
           arg[05] : -DSAPSYSTEMNAME=WFD
           arg[06] : -DSAPMYNAME=dfbhl6_WFD_00
           arg[07] : -DSAPPROFILE=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
           arg[08] : -DFRFC_FALLBACK=ON
           arg[09] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 2040] Thu Sep 25 15:46:00 2008
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.box.number=WFDD00dfbhl6] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.en.host=sapdev] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.en.port=3241] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties]
    -> ms host    : sapdev
    -> ms port    : 3941
    -> OS libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : no
    Used property files
    -> files [00] : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : sapdev
    -> ms port    : 3941
    -> os libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : no
    Bootstrap nodes
    -> [00] bootstrap            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID2623900  : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID2623950  : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID2623900            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [01] ID2623950            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    [Thr 2040] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
    [Thr 3504] JControlDPMessageProxy: Thread 3504 started as handler thread for R/3 dispatcher messages.
    [Thr 2040] [Node: bootstrap] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_13
    [Thr 2040] JStartupICheckFrameworkPackage: can't find framework package U:\usr\sap\WFD\D00\exe\jvmx.jar
    JStartupIReadSection: read node properties [bootstrap]
    -> node name          : bootstrap
    -> node type          : bootstrap
    -> node execute       : yes
    -> java path          : C:\j2sdk1.4.2_13
    -> java parameters    : -Djco.jarm=1 -verbose:gc -Djava.compiler=jitc -Dos400.run.mode=jitc -Dos400.disable.explicit.gc -Dos400.define.class.cache.file=/usr/sap/WFD/SYS/j2ee/cache/QDefineClassCache.jar -Dos400.define.class.cache.hours=9999 -Dos400.define.class.cache.maxpgms=40000 -Djava.ext.dirs=/usr/sap/WFD/SYS/j2ee/ext
    -> java vm version    : 1.4.2_13-b06
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 512M
    -> root path          : U:\usr\sap\WFD\D00\j2ee\cluster
    -> class path         : .\bootstrap\launcher.jar
    -> OS libs path       : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> main class         : com.sap.engine.offline.OfflineToolStart
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : U:\usr\sap\WFD\D00\exe\jstartup.jar;U:\usr\sap\WFD\D00\exe\jvmx.jar
    -> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0026239
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    JControlStartJLaunch: program = U:\usr\sap\WFD\D00\exe\jlaunch.exe
    -> arg[00] = U:\usr\sap\WFD\D00\exe\jlaunch.exe
    -> arg[01] = pf=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
    -> arg[02] = -DSAPINFO=WFD_00_bootstrap
    -> arg[03] = -nodeId=-1
    -> arg[04] = -file=U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> arg[05] = -syncSem=JSTARTUP_WAIT_ON_2308
    -> arg[06] = -nodeName=bootstrap
    -> arg[07] = -jvmOutFile=U:\usr\sap\WFD\D00\work\jvm_bootstrap.out
    -> arg[08] = -stdOutFile=U:\usr\sap\WFD\D00\work\std_bootstrap.out
    -> arg[09] = -locOutFile=U:\usr\sap\WFD\D00\work\dev_bootstrap
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
    -> arg[12] = -DSAPSTART=1
    -> arg[13] = -DCONNECT_PORT=4556
    -> arg[14] = -DSAPSYSTEM=00
    -> arg[15] = -DSAPSYSTEMNAME=WFD
    -> arg[16] = -DSAPMYNAME=dfbhl6_WFD_00
    -> arg[17] = -DSAPPROFILE=
    sapdev\sapmnt\WFD\SYS\profile\WFD_D00_dfbhl6
    -> arg[18] = -DFRFC_FALLBACK=ON
    -> arg[19] = -DFRFC_FALLBACK_HOST=localhost
    -> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;U:\usr\sap\APD\D31\exe;
    sapdev\SAPMNT\APD\exe\run_nt;U:\sapdb\programs\bin;U:\sapdb\programs\pgm;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\WINNT\AS400WSV\Admin;C:\WINNT\AS400WSV\Service;C:\WINNT\AS400WSV\Drivers;C:\PROGRA1\IBM\CLIENT1;C:\PROGRA1\IBM\CLIENT1\Shared;C:\PROGRA1\IBM\CLIENT1\Emulator;C:\Program Files\Symantec\pcAnywhere\;;
    sapdev\sapmnt\WFD\SYS\exe\uc\NTI386;U:\usr\sap\WFD\D00\exe
    -> exe path = PATH=C:\j2sdk1.4.2_13\bin;U:\usr\sap\WFD\D00\j2ee\os_libs;U:\usr\sap\APD\D31\exe;
    sapdev\SAPMNT\APD\exe\run_nt;U:\sapdb\programs\bin;U:\sapdb\programs\pgm;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\WINNT\AS400WSV\Admin;C:\WINNT\AS400WSV\Service;C:\WINNT\AS400WSV\Drivers;C:\PROGRA1\IBM\CLIENT1;C:\PROGRA1\IBM\CLIENT1\Shared;C:\PROGRA1\IBM\CLIENT1\Emulator;C:\Program Files\Symantec\pcAnywhere\;;
    sapdev\sapmnt\WFD\SYS\exe\uc\NTI386;U:\usr\sap\WFD\D00\exe
    [Thr 2040] Thu Sep 25 15:46:26 2008
    [Thr 2040] JControlExecuteBootstrap: read instance values after global bootstrap
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.box.number=WFDD00dfbhl6] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.en.host=sapdev] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.en.port=3241] [jstartxx.c   841]
    [Thr 2040] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties]
    -> ms host    : sapdev
    -> ms port    : 3941
    -> OS libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : no
    [Thr 2040] JControlExecuteBootstrap: enumerate the nodes after global bootstrap
    Used property files
    -> files [00] : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : sapdev
    -> ms port    : 3941
    -> os libs    : U:\usr\sap\WFD\D00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : no
    Bootstrap nodes
    -> [00] bootstrap            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID2623900  : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID2623950  : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID2623900            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    -> [01] ID2623950            : U:\usr\sap\WFD\D00\j2ee\cluster\instance.properties
    [Thr 2040] JControlCheckRunMode: run mode of the instance = safe
    [Thr 2040] Instance is disabled -> terminate.
    [Thr 2040] JControlCloseProgram: started (exitcode = -11113)
    [Thr 2040] JControlCloseProgram: good bye... (exitcode = -11113)

    Thanks Kaushal,
    I hadn't done any changes to UME, but I have got a JSPM support package (EP-PSERV SP16) in status of ERROR that seems to be at the bottom of the problem.
    Apparently, JSPM is not able to cope with any flavour of IBM DB2 (Windows, AIX, or i) at a point in this support package.  There is a note 1156313 and it matches the error which is in the  sdm log file:
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  WCR_USERSTAT modify column LOGONID to   type : VARCHAR,len : 255,dec : 0,not null : true,default :
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  WCR_USERSTAT modify column LOGONID to   type : VARCHAR,len : 255,dec : 0,not null : true,default :
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 db4-Info:  existsData() returns true.
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  Action: CONVERT
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  Action: CONVERT
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  Table has to be converted
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Info:  Table has to be converted
    Sep 25, 2008 4:51:32 PM  Info:
    Sep 25, 2008 4:51:32 PM  Info: E R R O R ******* (DbModificationManager)
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Error:  Table WCR_USERSTAT: Conversion currently not possible
    Sep 25, 2008 4:51:32 PM  Info:
    Sep 25, 2008 4:51:32 PM  Info: E R R O R ******* (DbModificationManager)
    Sep 25, 2008 4:51:32 PM  Info: 16:51:31 2008-09-25 dbs-Error:  Table WCR_USERSTAT: Conversion currently not possible
    Meanwhile, the commands in the note don't work as the DB   (Owner )  *ALL
    PUBLIC    *EXCLUDE
    regards
    Michael

  • Managed Server state "STARTING" after shut it down.

    Hello,
    I have a really odd situation here. I have a Managed Server with a "STARTING" state but it is really shutdown. I have tried to do "Force Shutdown Now" but the only I can get is this:
    Status of Last Action = TASK COMPLETED
    State = STARTING
    I cannot start the Managed Server because Weblogic says it is in an incompatible state. I have tried to restart the Admin server and delete the folder /cache and /tmp but I cannot solve it. Any help please? Where does WebLogic keep track of the status of its managed Servers?
    Thank you,
    Oscar

    Hello Fabian,
    I am using Solaris(unix). The managed server is not running. At least there is no weblogic process running on that machine (ps -ef | grep weblogic). I will try tomorrow to search of the name of the managed server as you suggested.
    It seems that the Admin server saves the status "STARTING" in any place for that managed server. Tomorrow I will also try to start the managed server from command line and later on shut it down from the Admin server(GUI). Let's see whether the managed server sends the notification to the admin server telling him that it was shut down correctly.
    Thanks for your reply,
    Oscar

  • My fan starts after shutdown why? iMac 3.4 GHz Intel Core i7 NVIDIA GeForce GTX 680MX 2048 MB

    Every tine I shutdown my iMac a fan at the rear starts up.  It is very noisy and only stops after I unplug.  When I plug power back in the fan starts again and stops after I power up the machine.  Can Aany one help please.

    Here are the proper specs for your model iMac.
    32 GB
    Memory Slots
    4 - 204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
    Nnot sure where you are located! but forget using Amazon and go right to the Crucial Memory site and use their memory selector to make sure you get the right memory.
    Depemding on where you are from Crucial has four international web locations.
    Also, I believe OWC (macsales.com) has international shipping and they have a few international resellers of the their RAM, too! You can call them toll free or by email to find out where to purchase their RAM, also.

  • Weblogic Managed server not starting after installing OIM 11g

    Hi All,
    I have installed OIM 11g successfully and I am able to start the WL Admin Server. But when I try to start the Managed Server for OIM (oim_server1), the screen just disappears and do not generate any logs.
    I haven't used the WL JDK while installing, used seperate JDK. Does it create any problem in starting the managed Server.
    Please help in solving this..
    Thanks,
    anag

    Hi,
    How are you starting the managed server, is it like this?
    xlStartManagedServer.cmd oim_server1 <URL of admin server>
    ~ Ketan

  • Weblogic Admin Server not starting after Virtual Server move

    Hi, we've migrated a VMware virtual server, and our Weblogic Admin (and managed IRM server) no longer start. The associated log files don't get updated and only the following info is present in the Command window, which I can only see if I use the /k switch, otherwise the windows shut immediately.
    WLS Start Mode=Development
    CLASSPATH=C:\Oracle\MIDDLE~3\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar
    ;C:\Oracle\MIDDLE~3\patch_wls1033\profiles\default\sys_manifest_classpath\weblog
    ic_patch.jar;C:\Oracle\MIDDLE~3\patch_oepe1033\profiles\default\sys_manifest_cla
    sspath\weblogic_patch.jar;C:\Oracle\MIDDLE~3\patch_ocp353\profiles\default\sys_m
    anifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~3\JDK160~1\lib\tools.jar;C
    :\Oracle\MIDDLE~3\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~3\WLSER
    V~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~3\modules\features\weblogic.serve
    r.modules_10.3.3.0.jar;C:\Oracle\MIDDLE~3\WLSERV~1.3\server\lib\webservices.jar;
    C:\Oracle\MIDDLE~3\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~3\modules
    \NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~3\ORACLE~1\soa\modules\common
    s-cli-1.1.jar;C:\Oracle\MIDDLE~3\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa
    -infra-mgmt.jar;C:\Oracle\MIDDLE~3\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:
    \Oracle\MIDDLE~3\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~3\
    WLSERV~1.3\server\lib\xqrl.jar
    PATH=C:\Oracle\MIDDLE~3\patch_wls1033\profiles\default\native;C:\Oracle\MIDDLE~3
    \patch_oepe1033\profiles\default\native;C:\Oracle\MIDDLE~3\patch_ocp353\profiles
    \default\native;C:\Oracle\MIDDLE~3\WLSERV~1.3\server\native\win\32;C:\Oracle\MID
    DLE~3\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~3\modules\ORGAPA~1.1\bin;C:\Oracle\
    MIDDLE~3\JDK160~1\jre\bin;C:\Oracle\MIDDLE~3\JDK160~1\bin;C:\oraclexe\app\oracle
    \product\10.2.0\server\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wb
    em;C:\Program Files\Java\jdk1.6.0_20\bin;C:\Program Files\Apache Software Founda
    tion\Apache2.2\modules;C:\Oracle\MIDDLE~3\WLSERV~1.3\server\native\win\32\oci920
    _8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    java version "1.6.0_18"
    Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
    Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
    Starting WLS with line:
    C:\Oracle\MIDDLE~3\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThre
    shold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -
    Djava.security.policy=C:\Oracle\MIDDLE~3\WLSERV~1.3\server\lib\weblogic.policy
    -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~3\WLSERV~1.3 -Dwls.home=C:\O
    racle\MIDDLE~3\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~3\WLSERV~1.3\s
    erver -Ddomain.home=C:\Oracle\MIDDLE~3\USER_P~1\domains\IRM_DO~1 -Dcommon.compo
    nents.home=C:\Oracle\MIDDLE~3\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons
    .logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Or
    acle\MIDDLE~3\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.do
    main.config.dir=C:\Oracle\MIDDLE~3\USER_P~1\domains\IRM_DO~1\config\FMWCON~1 -Do
    racle.server.config.dir=C:\Oracle\MIDDLE~3\USER_P~1\domains\IRM_DO~1\config\FMWC
    ON~1\servers\AdminServer -Doracle.security.jps.config=C:\Oracle\MIDDLE~3\USER_P~
    1\domains\IRM_DO~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=
    oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~3\USER_P~1\
    domains\IRM_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~
    3\USER_P~1\domains\IRM_DO~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateT
    ypesDirectory=C:\Oracle\MIDDLE~3\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracl
    e\MIDDLE~3\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEna
    bled=false -Dirm.oracle.home=C:\Oracle\MiddlewareNew\Oracle_ECM1 -Dem.oracle.ho
    me=C:\Oracle\MiddlewareNew\oracle_common -Djava.awt.headless=true -Dweblogic.man
    agement.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToC
    onsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~3\patch_wls1033\profiles\default\sy
    sext_manifest_classpath;C:\Oracle\MIDDLE~3\patch_oepe1033\profiles\default\sysex
    t_manifest_classpath;C:\Oracle\MIDDLE~3\patch_ocp353\profiles\default\sysext_man
    ifest_classpath weblogic.Server
    Is there another log file I could look at to get more info? None of the domain log files are updated.
    Thanks

    Thanks for the reply, this looks fine (I think)..the below is the output
    Microsoft Windows [Version 6.0.6001]
    Copyright (c) 2006 Microsoft Corporation. All rights reserved.
    C:\Users\Administrator.SEALEDINFO-PROD>cd C:\Oracle\MiddlewareNew\user_projects\
    domains\irm_domain\bin
    C:\Oracle\MiddlewareNew\user_projects\domains\irm_domain\bin>setdomainenv.cmd
    C:\Oracle\MiddlewareNew\user_projects\domains\irm_domain>java -version
    java version "1.6.0_18"
    Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
    Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
    C:\Oracle\MiddlewareNew\user_projects\domains\irm_domain>java weblogic.version
    WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401
    Use 'weblogic.version -verbose' to get subsystem information
    Use 'weblogic.utils.Versions' to get version information for all modules
    C:\Oracle\MiddlewareNew\user_projects\domains\irm_domain>

  • No tomcat server when starting Creator

    Hi,
    I noticed that the Tomcat 5 server does not appears in the deployment server node of Creator. I uninstalled and reinstalled the application, no success.
    I already have a tomcat 4.1 server runnning on port 8080 on that computer, may this explain the failure? How to configure the integrated Tomcat 5 server on another port?
    Thanks in advance.
    Valere

    Creator's bundled tomcat shouldn't be affected by any external tomcat installations you already got on your machine.
    The internal application server runs on local port 8081 by default, and can be configured at the Server Navigator window (top-left by default), under Deployment servers list, selecting and using the Properties window (top right side by default).
    dyn

  • Oracle Express Server wont start after install

    Hi all,
    For my sins I have to support an Oracle Express Server and am trying to get the software installed on my Dell latitude d630 laptop, am running XP SP2. When I start the service it fails and writes this to the logs :-
    [AD4     ] 3 05/14/2008 09:11:47 Security Mgr - Logon(Default)User(OESguest) fails - error: 1326.
    [AD4     ] 3 05/14/2008 09:11:47 Security Mgr - GlobalConstructor)() failed.
    So looks like it can't login as OESguest. I checked the users and I cant find this user.
    Anyone had this problem ????
    Thanks in advance,
    Brandon

    When you install express it creates three users i.e. oesdba,oesinit and oesguest. if it doesnt exists then try to create manually and see if you are able to up the express.
    change the password for oesguest at operating system level and check.
    Thanks
    Brijesh

  • TestStand Server remains busy after 2 steps have been edited

    Hi,
    anyone aware of a problem I am faced with (Newbie in TS): The sequence editor does report 'Server busy' forever, when I edited a sequence step and try to edit another one. Any solutions/workarounds other than killing TS and restart it? NI (Germany?) did not react within two days.

    Hi Bob,
    after having driven crazy with this I issued a service call to NI Germany. They offered me a hint to de- and re-install TS completely. This took me a long time, but now the system is up running. What about putting the hint you gave into the KB. It would have saved me a lot of trouble, because there's where search first. Allthough NI support is very good compared with others, a quick search in the KB is much much faster.
    Greetings from Germany!
    -- Uwe Frenz

  • Hi All, Mac Pro 2008 will not start after shutdown straight from sleep! Help!

    WILL A NEW LOGIC BOARD SOLVE MY PROBLEM?
    My early 2008 Mac Pro (2.8, 8-core 22 gigs ram) was shutting down from sleep both when I activated it, and then later by itself. Recently it refused to turn on, shuts down after about 3 seconds, light goes off, fans stop.
    Took it in and they replaced the GPU card and PSU. Things were great ... for two weeks. Then suddenly the same symptoms, but at an accelerated rate of occurance. After a day, it did not power on at all save the three seconds of startup fans.
    Took it in again. They AGAIN replace the known-faulty ATI Radeon HD2600 XT cards (two), the ones Apple have agreed to replace up to July 2011.
    Well got the machine back and she worked like a charm... for two weeks. Same thing now. By the way all checks of hardware, ram, disk drives - extensively have come up OK.
    Does anyone have any advice, or have the same problem?
    If it is the logic board, is it worth it to replace or when things go south like this is it better to cut your losses as more and more will likely go wrong?
    Would appreciate any feedback.
    Many thanks

    We can't help with your question. How would we know what has gone wrong with your hardware? We don't have access to your machine.
    I would take it back, or send it in, to Apple Repair.
    I hope you have AppleCare!

Maybe you are looking for

  • Error in View configuration "Define an assignment set in the runtime rep.."

    I have enhanced a standard component u2018BP_HEADu2019 and have enhanced the view u2018BP_HEAD_OVERVIEWu2019 in it to work on the configuration. But when I go to the configuration tab it says, "Define an assignment set in the runtime repository" and

  • Interactive form, guided procedure and R3 system

    Hi experts, I am working on a project where i am required to create a interactive form (pdf) using SAP NetWeaver. The user is allow to fill up their form before they finally call the SAP guided procedure upon hitting the submit button. I have go thro

  • Change Print Settings at WillPrint

    I see that the WillPrint event is triggered after the user dismisses the Print dialog box. I have a PDF where I want to only allow them to print page 1. Can I use the WillPrint event and change the print settings so only the first page is printed? Th

  • SQL 2005 Databases not Discovered

    We have a SQL 2005 server, where the DB instance itself has been discovered but the SQL DBs themselves have not. Any way to understand / troubleshoot why not. Other instances work just fine.

  • Template for leaflet in 'accordion' or 'concertina' fold

    Dear All, Does anybody happen to have a template for a concertina/accordion folded leaflet? I'd greatly appreciate if you shared your template with me! Kind regards Gerhard