Too Much Menu Motion?

Hi,
I'm stuck!! I have an iMovieHD project that I shared with iDVD (6.03) and chose a theme from the old themes catagory: the old film projector on. I had iDVD auto fill the drop boxes and when I try to burn it, I get a dialog box saying basically that I can't burn until I correct the problem of too much menu motion. I've gone to the edit box and dragged the slider down to 0.00 and I still get the dialog. I've got over 20 gigs available on my drive. Do any of you know how I shorten the menu motion? iDVD help did'nt address this.
Thanks!!!

Thanks for the reply! Would I have done that by using the autofill button? I didn't use the drop boxes, I just selected the theme. I will add this: When I'm looking in the gant chart mode, or chapter mode(?) all the way at the left I have a blue box with a disc in it that says to drag the content into it, and a red X below. I can't get rid of that box no matter what I do. Could you give me some more help, please, with an emphasis on details?
Thanks so much!

Similar Messages

Too much menu content

I'm trying to burn a Dual Layer DVD and I keep getting the following dialoge:
"The following warnings and errors were found during the validation of the current project:
- There seems to be too much motion menu content in your project. Correct this problem before you continue burning this project."
To try and correct this problem, I've scaled down all my loops and menus to be less than a minute long each and well under 15 minutes all toghet and even set all motion menus to be just still images, and yet, I still get this error when I ever I hit the 'burn' button to start burning an iDVD project.

I've scaled down all my loops and menus to be less than a minute long each
If by that you mean adjusted the clip playing time with the adjustment window in iDVD, that's your problem.
You really need to edit the entire CLIP to shorten them, because the total amout of time of all your clips - even though not displayed in a loop window - counts against the time limit. I edit my clips with QuickTime Pro. If you don't have QT Pro, you wil need to create some short clips in iMovie.

Error message in iDVD - too much motion in the menu?

i keep getting this error message:
"The following warnings and errors were found during the validation of the current project:
- There seems to be too much motion menu content in your project. Correct this problem before you continue burning this project."
even if i take off all the motion in the menus (im guessing that's dragging a video into a loadzone) i still cant burn the dvd
any ideas?
how can i still incorporate the videos in the menus tho? (cos i really like that, just looping in the menu)
thank you very much
cheers
miki

Welcome to the Apple Discussions. The total playing time of any videos or audio in menus must be less than 15 minutes. Check the Info pane for the project and see what the menus are listed at. I believe if you add a 4 minute audio track for a menu and only have 30 seconds being used the entire 4 minutes is used. So if you want to use just a part of a song, copy it to the desktop from iTunes and use Garageband or a 3rd party editor like Amadeus Pro to cut out just that portion you want to use.
If you've removed some of the media from the menus and it still lists as too much, use the Advanced menu to delete encoded assets and try saving as a disk image. If it saves OK you can play the disk image with DVD Player to preview the encoding before burning to disk with Disk Utility (at the slowest speed possible).
OT

DVD Burn Error: too much motion menu content yet not much.

hi
Keep getting this when i try to burn my DVD, can anyone advise?
+- The following warnings and errors were found during the validation of the current project:+
+- There seems to be too much motion menu content in your project. Correct this problem before you continue burning this project.+
Message was edited by: Logic Pro

Perhaps you can elaborate a bit more. How many menus do you have in the project? In the scenes menus how many motion buttons do you have? How many differen audio files are you using in the menus? Of the files you dropped into motion menus/buttons, how long are those clips? How long are the various audio files you are using? ? ? ? ?? ????? ???????????
I can't see your project so I have no idea what you are already using and if what you have is clearly excessive or not.
Patrick

How do i get rid of these dumb icons on my menu bar. they are not useful and they take up too much room. why did you do this?

i just upgraded to the new version of firefox. for some inexplicable reason, you've added icons to the left of my personal menu choices in the menu bar. these icons are purely decorative, they take up too much room, and now i can't display as many clickable items in the menu bar. extremely irritating. if you are going to add junk, at least give us the option to not display it. is there a way that i can turn off the display of these useless icons?

thank you! that worked! appreciate how quickly and accurate the support was.
that said,
it would be nice if the icons were the add-on,
and the default was no icons.
i'm sure the majority of your users would prefer function rather than fluff.
thanks again, mj

I have ios5 on iphone 4, but it makes iphone too much slower, release update to improve phone speed, when i touch home button, it have slower reaction, too while i scroll in menu and shuting down the applications, infinity blade is frozing

i have ios5 on iphone 4, but it makes iphone too much slower, release update to improve phone speed, when i touch home button, it have slower reaction, too while i scroll in menu and shuting down the applications, infinity blade is frozing during video game parts and during playing its 3 or 4x slower reactions, make update for ios5 please,
- reminders are ok
- camera- perfect
- newstand - perfect
- icloud too

Hi
I have a iPhone 4S this is not siri it is actally something to help those who have some sort of disability by reading the screen you can disable this by going to general then go to the bottom to accessability
Hope this helps you

Menu Motion Content? means what in English..

Ok, so I'm minutes away from my first dvd and I'm so excited, but the dvd will not burn because I have " too much motion menu content" for what is allowed? What does this mean exactly, and what can I delete or shrink to make it all work? Could the size of the audio files, or image files be a part of this? Is it needed for me to shrink everything down in Photoshop BEFORE I start a project like this? Thanks

Could a large slideshow be doing this ?
Your error message said motion menu content so your problem isn't a slideshow.
What is the length of the video clips you have put in the menu windows for clips?

Can too much memory lead to a kernel panic on a MacBook Pro? specs 2.4GHz intel core i7 16GB DDR3 RAM late2011..My laptop began suffering from kernel panics 3 mos ago first noticed using public wifi. Gone thru apple support all the way to engineers

Can too much RAM memory in a late 2011 model macbook pro lead to kernel panic? That is what I was told by a senior supervisor from apple support who troubleshot this issue.First noticed this problem in Dec 2014 while using a private wifi at a relative's home. Did not occur again until Feb1 using a public wifi at a hotel. Never happened on my private wifi network until last night attempting to use airplay. ( have used airplay before without issue). Late 2011 MacBook Pro running 10.9.5; 2.4 GHz Intel core i7, 16 GB DDR3,AMD Radeon HD 6770m 1024 MB graphic card. The laptop came with 8GB RAM and I installed 8 GB about 2 years ago for some reason I cannot remember... probably because I thought the system was slowing down a little. I know that sounds silly. I do not run multiple programs at a time except I leave 6-8 website tabs open simultaneously. I don't photo or video edit. I would describe my use as "light" based on reading these blogs.I had purchased apple support and spent hours on the phone with them in early Feb moving up through support and senior support to sending logs to the "engineers." Of course lots of things were done some of which I am sorry to report I cannot recall their technical definitions. Deleted 3rd party apps/programs; re-worked start up menu; re-installed operating system; reset " this, that and the other" using acrobatic simultaneous key strokes both in and out of safe mode..Anyway the results from the engineers came back and they suggested that if it happened again I was to remove the 8GB of RAM I had installed as the system was getting confused as to which chip to use.( that is my interpretation of what was said..prob dumbed down for me)...Anyway 1 day after these pronouncements came down I read that Apple had agreed to fix graphics cards in some late model 2011 MBPs. I felt this was unlikely to be the issue given all that had been done including an extended hardware test but called the Senior Support Supervisor I was working with to ask him to make sure. He never phoned me back. Should I go to the trouble of removing 8GB of RAM from my laptop? Of course I will try it as the alternative is a new computer.Blogs read that this model can support 16GB but Apple didn't test for it. Senior Supervisor claims this is my trouble. Does that make sense? Not to me....but it is clear to all my level of knowledge. Can a malfunctioning graphics card be missed by an extended hardware test? I appreciate comments.

The RAM needs specs as shown below.
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

White MacBook takes too much time to boot up

Hi there.
I got the topcase(keyboard) of my MacBook repaired. (White MacBook 2006) and after that it takes nearly 7 up to 10 seconds after pressing the power button that I first see apple logo and it boots up.
I'm not sure but seems like that detecting the hardwares take too much time .
any solution?
PS: I'm running Snow Leopard(10.6.2)

macbig wrote:
OK, 32 seconds is not good. I don't think it has anything to do with a keyboard repair. You need to try a little maintenance: Reset Pram - http://docs.info.apple.com/article.html?artnum=2238
Repair Permissions - http://support.apple.com/kb/HT1452
Run Disk Utility >applications>utilities>disk utilities>verify disk
How much free space do you have on your HD: Right click on HD icon and select "get info" in the drop down menu (if you don't have right click capabilities, highlight your HD icon, go file in the Apple menu, and select "get info" in the drop down menu. Let us know your results.
Yes PRAM was the the problem, I've already tried it from this thread http://discussions.apple.com/thread.jspa?threadID=2303507&tstart=0
by the way thank you .

Taking too much time in Rules(DTP Schedule run)

Hi,
I am Scheduling the DTP which have filters to minimize the load data.
when i run the DTP it is taking too much time in the "rules" (i can see the DTP monitor ststus package by pakage and step by step like "Start routine" "rules" and "End Routine")
here it is consuming too much time in Rules Mapping.
what is the problem and any solutions please...
regards,
sree

Hi,
Time taken at "rules" depends on the complexity involved there in ur routine. If it is a complex calculation it will take time.
Also check ur DTP batch settings, ie how many no. of background processes used to perform DTP, Job class.
U can find these :
goto DTP, select goto menu and select "Settings for Batch Manager".
In the screen increase no of Processes from 3 to higher no(max 9).
ChaNGE job class to 'A'.
If ur DTP is still running , cancel it ie Kill the DTP, delete from the Cube,
Change these settings and run ur DTP one more time.
U can observer the difference.
Reddy

NX 6125 too much time to complete POST. USB error

I have been having some issues over the last week or two
NX 6125 takes too much time to boot. I'm dual booting it , Windows XP and Linux Mint.
It takes more time to complete the POST, during POST, LEDs on all the USB devices attached to it will go ON & OFF.
then comes the boot menu. from that step onwards it works normally.
Once it boots into Windows, there is a pop up "USB device malfunctioned" which keeps on coming even if no devices are attached to USB.(it has an internal card reader and fingerprint reader module)
While using Linux, the kernel throws the error " [ 2094.490070] hub 1-0:1.0: connect-debounce failed, port 2 disabled "
Checked the RAM with memtest and hdd with self test from BIOS, says OK.
The major issue is it can't boot from any other devices other than internal harddisk !
Previously I could boot Linux frm DVDs and bootable USB drives.
Windows XP cd when booted gives "NTLDR missing" error.
Kindly help me.

card reader is a usb device, not sure about the fingerprint reader.
one of them has malfunctioned. check the card reader slot for debris.
You may have to open up the notebook and disconnect the card reader, see if the error stops.

Report taking too much time in the portal

Hi freiends,
we have developed a report on the ods,and we publish the same on the portal.
the problem is when the users are executing the report at the same time it is taking too much time.because of this the perfoemance is very poor.
is there any way to sort out this issue,like can we send the report to the individual user's mail id
so that they can not log in to the portal
or can we create the same report on the cube.
what could be the main difference if the report made on the cube or ods?
please help me
thanks in advance
sridath

Hi
Try this to improve performance of query
Find the query Run-time
where to find the query Run-time ?
557870 'FAQ BW Query Performance'
130696 - Performance trace in BW
This info may be helpful.
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memory will decrease the loading time of the report.
Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
performance ISSUE related to AGGREGATE
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
6
Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Assign points if useful
Cheers
SM

On my MacBook Pro with Retina Display, Why does the "USB Devices Disabled Unplug the device using too much power to re-enable USB devices" keep coming up after I unplugged the usb device?

On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
"USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
I unplugged the device and the message still keeps coming up.
This is what I have done so far to troubleshoot:
I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.

I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
1. Reinstalled OSX
2. Restore the last known good Time Machine Backup.
This did not fix my issue, so I called Apple Support and they told me this:
1. Turn Power off.
2. Wait 15 seconds.
3. Plug in Magsafe adapter.
4. Wait 15 seconds.
5. Hold down the Shift+Option+Power Button for 20-30 seconds.
6. Turn Power back on.
Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done.

How do i get rid of "other" on macbook air? its taking up too much room

How do I get rid of the "other" storage space on my macbook air? it takes up too much on my small 64GB macbook air? I must get rid of it as I have now space to put anything on my computer.

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

What is the best way to manage my iPhoto, which is taking up too much space on my MacBook Pro?

What is the best way to manage my iPhoto, which is taking up too much space on my MacBook Pro?
Specifically, I'd like to keep some of my favorite pictures on the laptop while moving the rest to an external hard drive. Is there a way to tag just a few pictures inside an event/album as "favorite", while storing the rest in an EHD, but still keep them connected to the same event/album? I'd like to have just the favorite pictures on the laptop, but when I have the EHD connected, be able to view all my pictures in the same place, and not have to browse through separate hard drives. Ideally, whether or not a picture is designated as "favorite" will determine where it resides.
Is this at all possible?
I have only 7 GB left on my HD and I'm desperately needing a solution!
Thanks!

You need two libraries to do this. One on the external with all your Photos. One on the internal with a subset - your favourites. You do it this way to make backing up easier - that is, back up the library with everything, so you're only backing up one.
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
Now you have two full versions of the Library.
3. On the Internal library, trash the Events/albums/photos you don't want there
Now you have a full copy of the Library on the External and a smaller subset on the Internal
Some Notes:
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
You can keep the Library on the external updated with new imports using iPhoto Library Manager

Too Much Menu Motion?

Similar Messages

Maybe you are looking for