Top install error on Solaris 10 X64

Hi,
I am trying to compile Top 3.7 on Solaris 10X64 update 7, the compiled binary can be runned in the building directory, but can't run when installed, the error message is as following:
# gmake install
cp -f /usr/lib/isaexec top
mkdir -p /usr/local/share/man/man1
./install-sh -c -m 644 \
top.1 /usr/local/share/man/man1/top.1
mkdir -p /usr/local/bin/i386
mkdir -p /usr/local/bin/amd64
./install-sh -c -m 755 \
i386/top /usr/local/bin/i386/top
./install-sh -c -m 755 \
amd64/top /usr/local/bin/amd64/top
./install-sh -c -m 755 \
top /usr/local/bin/top
# exit
-bash-3.00$ top
top: cannot find/execute "top" in ISA subdirectories
-bash-3.00$

-bash-3.00$ more /tmp/out
17160: execve("/usr/bin/top", 0x08047D74, 0x08047D7C) argc = 1
17160: resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
17160: mmap(0x00000000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_A
NON, -1, 0) = 0xFEFF0000
17160: resolvepath("/usr/bin/top", "/usr/bin/top", 1023) = 12
17160: xstat(2, "/usr/bin/top", 0x08047B58) = 0
17160: open("/var/ld/ld.config", O_RDONLY) Err#2 ENOENT
17160: xstat(2, "/lib/libc.so.1", 0x08047388) = 0
17160: resolvepath("/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
17160: open("/lib/libc.so.1", O_RDONLY) = 3
17160: mmap(0x00010000, 32768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0
) = 0xFEFB0000
17160: mmap(0x00010000, 1212416, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|
MAP_ALIGN, -1, 0) = 0xFEE80000
17160: mmap(0xFEE80000, 1102037, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP
_TEXT, 3, 0) = 0xFEE80000
17160: mmap(0xFEF9E000, 30183, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_
INITDATA, 3, 1105920) = 0xFEF9E000
17160: mmap(0xFEFA6000, 4240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_A
NON, -1, 0) = 0xFEFA6000
17160: munmap(0xFEF8E000, 65536) = 0
17160: memcntl(0xFEE80000, 123884, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
17160: close(3) = 0
17160: sysconfig(_CONFIG_PAGESIZE) = 4096
17160: mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEF90000
17160: munmap(0xFEFB0000, 32768) = 0
17160: getcontext(0x08047910)
17160: getrlimit(RLIMIT_STACK, 0x08047908) = 0
17160: getpid() = 17160 [17159]
17160: lwp_private(0, 1, 0xFEF92A00) = 0x000001C3
17160: setustack(0xFEF92A60)
17160: sysi86(SI86FPSTART, 0xFEFA6740, 0x0000133F, 0x00001F80) = 0x00000001
17160: brk(0x08061518) = 0
17160: brk(0x08063518) = 0
17160: sysinfo(SI_ISALIST, "", 1) = 68
17160: sysinfo(SI_ISALIST, "amd64 pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86", 68) = 68
17160: open("/proc/self/auxv", O_RDONLY) = 3
17160: fxstat(2, 3, 0x08047C88) = 0
17160: read(3, "D807\0\0E67F04\bDE07\0\0".., 168) = 168
17160: close(3) = 0
17160: access("/usr/bin/amd64/top", X_OK) Err#2 ENOENT
17160: access("/usr/bin/pentium_pro+mmx/top", X_OK) Err#2 ENOENT
17160: access("/usr/bin/pentium_pro/top", X_OK) Err#2 ENOENT
17160: access("/usr/bin/pentium+mmx/top", X_OK) Err#2 ENOENT
17160: access("/usr/bin/pentium/top", X_OK) Err#2 ENOENT
17160: access("/usr/bin/i486/top", X_OK) Err#20 ENOTDIR
17160: access("/usr/bin/i386/top", X_OK) Err#20 ENOTDIR
17160: access("/usr/bin/i86/top", X_OK) Err#2 ENOENT
17160: fstat64(2, 0x08046FF0) = 0
17160: write(2, " t o p", 3) = 3
17160: write(2, " : c a n n o t f i n".., 23) = 23
17160: write(2, " t o p", 3) = 3
17160: write(2, " " i n I S A s u b".., 24) = 24
17160: _exit(1)

Similar Messages

  • Install error on Solaris for 11g due to superseeded patches

    When I try to install SOA 11g on Solaris 10. I get the error that the follwoing patches are missing
    127111
    137111
    Yet in our version of Solaris these patches have been superseeded as follows
    127111 was by 127127-11
    137111 was by 137137-09
    Anyone run into this?

    I had to use -ignoreSysPrereqs per Oracle to make it work
    Edited by: ss396s on Jul 20, 2009 9:08 AM

  • Install error for Solaris 8 intel

    When my Solaris 8 install gets to the spot where it asks for the language to use (0-9, english is 0, which I want), anything I hit on my keyboard sends bogus VT codes to the screen. Earlier in the install process (when it asks for solaris interactive vs custom for example), my keyboard works fine, I can choose 1 or 2 there.
    Has anyone else seen the problem? I've tried multiple keyboards, and they all do the same thing.

    Sounds like the dell keyboard problem:
    http://groups.yahoo.com/group/solarisonintel/message/20087
    The workaround is to attach an USB keyboard.

  • Install Error for Vista x64

    Ever since the release of 7.5, I've been unable to update iTunes. As a result, I've been blissfully enjoying 7.4 for a while now. However, I bought an iPhone yesterday and must deal with my inability to install 7.7. In my attempts to install (both .exe and .msi files individually), I get the following error:
    "The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance."
    A quick search for this error on Google and the Apple support forums leads me to http://support.microsoft.com/kb/315346 but it unfortunately only applies to XP/ Server 2003. I figured I should target iTunes as the problem and not Vista, as I have no trouble installing anything else at all.
    I'm going crazy in frustration. I've tried everything from quiet installs to editing the .msi files through Orca. Any thoughts?

    I wanna ask is it my display or something else. Im using 1366x768.
    Yes it is. The system requirements are there for a reason, not just for fun. These apps all have tons of palettes and require extra space for displaying timelines, compositions and video previews and even if they could be installed with such a small screen res, working with them would be no fun at all because things would get cut off or you would be forced to shuffle palettes around all the time. You really need a qualified computer.
    Mylenium

  • ORACLE RAC 11.0.2.0.3 install in SOLARIS x64 11.1(or 11/11) issue

    hello all,
    i got issue when i install grid(11.0.2.0.3 for solaris x64 version), after install software and the run "root.sh" and got the follow error message:
    /u01/app/11.2.0/grid/bin/srvctl start nodeapps -n solrac1 ... failed
    FirstNode configuration failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 9196.
    /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
    any one can help me about that?
    and i got the same error for solaris x64 11/11 version.

    Hi Friend
    Below both are NOT CERTIFIED
    Oracle Real Application Clusters 11.2.0.3.0 is not certified on Oracle Solaris on x86-64 (64-bit) 11.1
    Oracle Real Application Clusters 11.2.0.3.0 is not certified on Oracle Solaris on SPARC (64-bit) 11.1
    Check Metalink : In certifications Tab
    Thanks
    LaserSoft

  • Installing SOA Suite 11gR1 + OSB 11gR1 on Solaris x64

    Experts,
    I'm having some trouble installing SOA Suite and OSB on Solaris x64.
    According to the last certification matrix
    [http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls]
    ALL products are supported on Solaris x64 (version 11.1.1.4+) , but when trying to execute the runInstaller I get the following error:
    $ ./runInstaller -jreLoc /usr/jdk/instances/jdk1.6.0/
    ./runInstaller: /soasoat/install/SOA/Disk1/install/solaris/runInstaller: cannot execute
    I searched in eDelivery but there aren't any SOA installers (for version 11.1.1.1) for Solaris on x64
    Is there any way to bypass this error?
    Thanks in advance.
    Leandro

    Hi Leandro
    1. SOA Installer has nothing to do with 32/64 bit. I mean there is NO specific 64 bit version of soa software. It is the underlying Weblogic Server that matters.
    2. Since you have 64 bit machine, very first thing, you should install a 64 Bit JDK (Sun or JRockit). And make sure to put this in path. When you run java -version, you should see this 64 bit jdk referred. Now comes Weblogic Server. You need to Download Weblogic Server Generic Installer (file ending with .jar). Then you install Weblogic server using command something like this:
    java -d64 -jar weblogic_generic_xxxx.jar (Try -d or -D). After installation, now you have Weblogic Server 64 Bit installed on top of 64 Bit JDK.
    3. Now run the SOA Installer and for the jre, you can refer the above jdk/jre location.
    Thanks
    Ravi Jegga

  • Unable to install SAP Netweaver 2004s in Solaris x64

    I am trying to install SAP Net2004s in solaris x64 and it has JDK1.6.
    For some reason the SAPINST keeps giving error "JDK version 1.5.0 and above is not supported by SAP.
    I downloaded and installed j2sdk1.4.2_24_b06 as per note 716604.
    Created environment variable as
    export JAVA_HOME=/opt/j2sdk1.4.2_24
    export PATH=$PATH:$JAVA_HOME/bin
    export SAPINST_JRE_HOME=opt/j2sdk1.4.2_24
    now if i execute java -version, again it is showing as Jdk1.6
    which java
    /usr/bin/java
    i am able to execute xclock.
    I renamed the softlink in /usr/java to java.old and created new one as /usr/java pointed to /opt/j2sdk1.4.2_24
    after this if i execute java -version, it gives an error "Error occurred during initialization of VM
    java/lang/NoClassDefFoundError: java/lang/Object"
    Now i checked the java executables, it is located in /opt/j2sdk1.4.2_24/bin/amd64/ (all java executables)
    Now i set the env PATH /opt/j2sdk1.4.2_24/bin/amd64 before the variable /ur/bin/java
    I tried creating env as "export PATH=$PATH:$JAVA_HOME/bin/amd64". But no luck.
    I would really appreciate if someone could help me to pass through this error.
    Thanks in advance.

    install a fresh JDK just need 64 bit version
    and set the environment variables accordingly,
    i did install java64bit and out put java -version is j2sdk1.4.2_24 64bit
    created env
    export JAVA_HOME=/opt/j2dsk1.4.2_24
    export PATH=$JAVA_HOME/bin:$PATH
    export SAPINST_JRE_HOME=/opt/j2dsk1.4.2_24
    export DISPLAY=XXX:0.0
    able to execute xclock
    But got the same error when i try to execute ./sapinst
    error "GUI not Connected......."
    i wonder that in java 64 bit,the executables are located in /opt/j2sdk1.4.2_24/bin/amd64/(all java executables)
    but when we execute ./sapinst, it shows as it is searching the executables in /opt/j2sdk1.4.2_24/bin
    i don't know if that matters.
    but just want to let you know that, i was able to get the sapinst gui, when pointing to java1.6 version, but unfortunatly sap won't support above java1.5.
    path of java1.6 executables - /usr/jdk/jdk1.6../bin/(all java executables)
    Please help me resolving this issue.

  • Installing EPM 11.1.1.3 on Solaris x64

    Hello Gurus,
    I am not able to install EPM 11.1.1.3 on Solaris x64. I am facing an issue while I execute installTool.sh. It gives me an error
    Cannot execute <filename>
    Could anyone please help. What are the steps that I need to keep in mind before doing that.
    Thanks and Regards,
    Saurabh

    CLOSING THE QUESTION AS NO ANSWER TO IT SINCE LONG TIME

  • Error while installing SQL Server 2012 X64 SP2,

    Error while installing SQL Server 2012 X64 SP2,
     When I installed the SQL Server 2012 X64 SP1, I got the attached error.
     What might be the issue here?
     Thank you
     Best
    Jamal

    Hello,
    Are you trying to install SQL Server on a compressed or encrypted drive? SQL Server won’t install on a drive/folder with these attributes.
    Are you trying to install SQL Server on a ReFS file system? It is not supported on SQL Server 2012.
    Disable any security/antivirus software and download the media again. Mount the media (.ISO file) and try to install again.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Error trying to install Win 8.1 x64 Enterprise

    Brand new iMac 27", fully loaded, 1 TB SSD, 32 GB RAM, running Mavericks 10.9.3.  Trying to install Win 8.1 x64 Enterprise (from MSDN).
    Downloaded the ISO file and license and used Boot Camp to install the files and Apple Support files to a 16 GB USB 3.0 thumbdrive.
    Used Boot Camp to repartition the 1 TB SSD to set a Windows partion of 256 GB, then the computer rebooted into Windows Setup.
    Came to the drives listing, selected the BOOTCAMP parition (Drive 0, Partition 4, 239 GB) and formated it, then clicked on NEXT.
    Thought for a while, then it came up with this error message:  "We couldn't install Windows in the location you chose.  Please check your media drive.  Here's more info about what happened:  0x80300002"
    Got some hits on Google about issues with VISTA, or with Intel processors, but, nothing specific.
    Checked USB thumb drive with Norton, no issues, CHKDSK, no issues.
    Have repeated the entire process twice, including restoring the patition and recreating it, and rebuilding the USB Thumbdrive.
    Any ideas on what to do?
    Thanks!

    More sadness.  I finally started getting the BSOD as soon as Windows booted, and, I could not restart or shutdown the computer...had to power off.  That, after a few times, corrupted my BootCamp partition.  I messed around with trying to fix, but, no joy.
    Redid the partition, checked all drives for errors (fixed permissions on the Mac HD...LOT of errors), and created a new partition.
    Used USB 2.0 (VERY SLOW) thumbdrive and had all external drives removed, and installed Win 8.1 Pro, not Enterprise this time.
    Got it back up, patched it, configured it, put Norton 360 on it (have on all my computers and iOS devices) shut down, and hooked up the external drives.  Booted up and...got the BSOD.
    This time I had Windows Debugger loaded, and after the BSOD could reboot, go back intoWindows, and Debug.
    Culprit seems to be Norton--in particular a Norton Storage driver.  Will be contacting vendor to fix.
    Here's dump:
    Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
    Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\Dump\MEMORY.DMP]
    Kernel Bitmap Dump File: Only kernel address space is available
    ************* Symbol Path validation summary **************
    Response                         Time (ms)     Location
    Deferred                                       SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
    Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows 8 Kernel Version 9600 MP (8 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
    Machine Name:
    Kernel base = 0xfffff802`0f87e000 PsLoadedModuleList = 0xfffff802`0fb482d0
    Debug session time: Tue Jun 17 00:48:52.131 2014 (UTC - 6:00)
    System Uptime: 0 days 0:03:09.864
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    *                        Bugcheck Analysis                                    *
    Use !analyze -v to get detailed debugging information.
    BugCheck 139, {3, ffffd0002852d3e0, ffffd0002852d338, 0}
    *** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
    *** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
    Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
    Followup: MachineOwner
    6: kd> !analyze -v
    *                        Bugcheck Analysis                                    *
    KERNEL_SECURITY_CHECK_FAILURE (139)
    A kernel component has corrupted a critical data structure.  The corruption
    could potentially allow a malicious user to gain control of this machine.
    Arguments:
    Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
    Arg2: ffffd0002852d3e0, Address of the trap frame for the exception that caused the bugcheck
    Arg3: ffffd0002852d338, Address of the exception record for the exception that caused the bugcheck
    Arg4: 0000000000000000, Reserved
    Debugging Details:
    TRAP_FRAME:  ffffd0002852d3e0 -- (.trap 0xffffd0002852d3e0)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=ffffe00059c129f0 rbx=0000000000000000 rcx=0000000000000003
    rdx=ffffe0005718d2a0 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff8020f9e8cdb rsp=ffffd0002852d570 rbp=0000000000000000
    r8=0000000000005aa0  r9=00000000000007ff r10=ffffd00066cc8000
    r11=ffffe00059963040 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei pl nz na pe cy
    nt! ?? ::FNODOBFM::`string'+0x682b:
    fffff802`0f9e8cdb cd29            int     29h
    Resetting default scope
    EXCEPTION_RECORD:  ffffd0002852d338 -- (.exr 0xffffd0002852d338)
    ExceptionAddress: fffff8020f9e8cdb (nt! ?? ::FNODOBFM::`string'+0x000000000000682b)
       ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
      ExceptionFlags: 00000001
    NumberParameters: 1
       Parameter[0]: 0000000000000003
    DEFAULT_BUCKET_ID:  LIST_ENTRY_CORRUPT
    BUGCHECK_STR:  0x139
    PROCESS_NAME:  System
    CURRENT_IRQL:  2
    ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
    EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
    EXCEPTION_PARAMETER1:  0000000000000003
    ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
    LAST_CONTROL_TRANSFER:  from fffff8020f9ddae9 to fffff8020f9d1fa0
    STACK_TEXT: 
    ffffd000`2852d0b8 fffff802`0f9ddae9 : 00000000`00000139 00000000`00000003 ffffd000`2852d3e0 ffffd000`2852d338 : nt!KeBugCheckEx
    ffffd000`2852d0c0 fffff802`0f9dde10 : ffffe000`59c8cc40 00000000`00000000 ffffe000`54b71040 fffff800`1d6d40b6 : nt!KiBugCheckDispatch+0x69
    ffffd000`2852d200 fffff802`0f9dd034 : 00000000`00000000 00000000`00000000 ffff6d2d`50094127 fffff802`0f81458f : nt!KiFastFailDispatch+0xd0
    ffffd000`2852d3e0 fffff802`0f9e8cdb : ffffc000`061df4e0 ffffc000`061df4e0 ffffc000`061dfbf8 00000000`00000000 : nt!KiRaiseSecurityCheckFailure+0xf4
    ffffd000`2852d570 fffff800`1d7a0be6 : ffffe000`59e10120 fffff800`1d794388 ffffe000`54dfe9c8 fffff800`1d735f7c : nt! ?? ::FNODOBFM::`string'+0x682b
    ffffd000`2852d5a0 fffff800`1d7a54e2 : ffffc000`061df4e0 ffffc000`061dfbf8 ffffc000`061df550 fffff800`1d7367ea : SYMDS64+0x71be6
    ffffd000`2852d5d0 fffff800`1d737f20 : ffffc000`061df378 ffffc000`061dfbf8 00000000`00000000 ffffc000`05a9bf18 : SYMDS64+0x764e2
    ffffd000`2852d620 fffff800`1d73e171 : ffffc000`051e6a88 ffffc000`05a9bf18 ffffc000`05a9bf18 ffffe000`5988cb00 : SYMDS64+0x8f20
    ffffd000`2852d650 fffff800`1d782027 : ffffc000`061ea018 00000000`00000000 ffffe000`58409008 fffff800`1d794388 : SYMDS64+0xf171
    ffffd000`2852d680 fffff800`1d79af21 : ffffc000`061ea018 ffffd000`2852d8c9 ffffe000`58409008 00000000`10000004 : SYMDS64+0x53027
    ffffd000`2852d6c0 fffff800`1d9a3bb3 : ffffe000`58409078 fffff800`1d98b3e8 ffffe000`58409008 ffffd000`2852d8c9 : SYMDS64+0x6bf21
    ffffd000`2852d6f0 fffff800`1d9a91fa : ffffe000`5840a1a8 ffffe000`58409008 00000000`00000000 ffffe000`00000000 : SYMEFA64+0xe9bb3
    ffffd000`2852d720 fffff800`1d9ae015 : 00000000`00000000 00000000`00000000 ffffd000`2852d8c9 ffffe000`58a10e60 : SYMEFA64+0xef1fa
    ffffd000`2852d760 fffff800`1d9adf4c : 00000000`01820201 ffffe000`58a10e60 ffffe000`58a10e60 ffffe000`58a10be0 : SYMEFA64+0xf4015
    ffffd000`2852d790 fffff800`1d9b294c : ffffe000`59e0a150 ffffe000`58a10e60 ffffe000`5988ca80 ffffe000`58a10e60 : SYMEFA64+0xf3f4c
    ffffd000`2852d7c0 fffff800`1d9a2435 : ffffd000`2852d8a0 ffffe000`599a4010 ffffd000`00000000 ffffe000`59e0a010 : SYMEFA64+0xf894c
    ffffd000`2852d7f0 fffff800`1d6d528a : 00000000`00000000 ffffe000`59e0a070 ffffe000`5604e300 ffffe000`58a10e60 : SYMEFA64+0xe8435
    ffffd000`2852d820 fffff800`1d71bf76 : ffffd000`2852d960 00000000`00000000 ffffe000`5604f900 ffffe000`571dab10 : fltmgr!FltpPerformPreCallbacks+0x31a
    ffffd000`2852d930 fffff800`1d6d413a : ffffe000`57170dd0 ffffe000`571dabd0 ffffe000`59cf18c0 fffff802`0fd411a7 : fltmgr!FltpProcessShutdownRequest+0x122
    ffffd000`2852d9b0 fffff802`0fbf7518 : ffffe000`57170dd0 00000000`00000001 ffffe000`571dabd0 fffff802`0fb54a90 : fltmgr!FltpDispatch+0x13a
    ffffd000`2852da10 fffff802`0fbf7273 : 00000000`00000001 00000000`00000000 00000000`00000001 00000000`00000000 : nt!IopShutdownBaseFileSystems+0xb8
    ffffd000`2852da90 fffff802`0fbfb722 : fffff802`0fbfb4b0 00000000`00000000 ffffe000`59963040 ffffe000`59963040 : nt!IoShutdownSystem+0x127
    ffffd000`2852db10 fffff802`0f8d1adb : fffff802`0fbfb4b0 ffffd000`2852dbd0 00000000`00000000 ffffe000`59963040 : nt!PopGracefulShutdown+0x272
    ffffd000`2852db50 fffff802`0f94d794 : ffffe000`59965800 ffffe000`59963040 ffffe000`59963040 ffffe000`54b71040 : nt!ExpWorkerThread+0x293
    ffffd000`2852dc00 fffff802`0f9d85c6 : ffffd000`66c40180 ffffe000`59963040 ffffe000`59965800 00000000`00000000 : nt!PspSystemThreadStartup+0x58
    ffffd000`2852dc60 00000000`00000000 : ffffd000`2852e000 ffffd000`28528000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
    STACK_COMMAND:  kb
    FOLLOWUP_IP:
    SYMDS64+71be6
    fffff800`1d7a0be6 33d2            xor     edx,edx
    SYMBOL_STACK_INDEX:  5
    SYMBOL_NAME:  SYMDS64+71be6
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: SYMDS64
    IMAGE_NAME:  SYMDS64.SYS
    DEBUG_FLR_IMAGE_TIMESTAMP:  51f84c44
    FAILURE_BUCKET_ID:  0x139_3_SYMDS64+71be6
    BUCKET_ID:  0x139_3_SYMDS64+71be6
    ANALYSIS_SOURCE:  KM
    FAILURE_ID_HASH_STRING:  km:0x139_3_symds64+71be6
    FAILURE_ID_HASH:  {bf9be68b-5f04-08d4-3152-3d420dc362f6}
    Followup: MachineOwner

  • Itunes install error message - program not found ...x64/difxinst64.exe

    itunes install error message - program not found ...x64/difxinst64.exe
    no problems with ITunes on Dell Inspiron Windows 7 until yesterday.  ITunes version 11.0.2.  iphone won't connect stating required software is not installed.  uninstall and install 64 bit version of iTunes.  I have 64 bit version already.  I have uninstalled and reinstalled 5 times already.  When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe.  file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel.   iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again.  therefore, I can't sync my iphone with iTunes until I figure this out.
    can't win for losing.  had iTunes on my windows 7 laptop for 4 years.  first time I've ever encountered this.

    I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
    [code]
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\.exe]
    @="exefile"
    "Content Type"="application/x-msdownload"
    [HKEY_CLASSES_ROOT\.exe\PersistentHandler]
    @="{098f2470-bae0-11cd-b579-08002b30bfeb}"
    [/code]
    Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

  • Install Errors for 9i on Solaris 9

    I am installing Oracle 9i Solaris 9 and the install went well until the Oracle Database Configuration Assistant. It failed with the following errors:
    Oracle Database Configuration Assistant Errors for install
    ORA-27303
    ORA-27146
    ORA-27300
    ORA-27301
    ORA-27302
    Can someone enlighten me as to what these mean?
    Message was edited by:
    d072330

    For all of those newbies like me I forgot to set some system settings. Here are the system settings I needed to put into /etc/system:
    set semsys:seminfo_semmni=100
    set semsys:seminfo_semmns=3000
    set semsys:seminfo_semmsl= 256
    set shmsys:shminfo_shmmax=4294967295
    set shmsys:shminfo_shmmin=1
    set shmsys:shminfo_shmmni=200
    set shmsys:shminfo_shmseg=20

  • Solaris 10 - Installing Errors - Dell Dimension 4100

    Hello All,
    I am tring to install Solaris 10 on a Dell Dimension 4100 system. I am getting an error, then the system reboots.
    I am able to boot the Solaris 10 (03/05) DVD, I downloaded.
    I get prompted : "Type of Installation you want to perform"
    No matter which option I chose - I get the same results.
    I get the msg: "Booting Kernel/Unix"
    I then get the msg : "Configuring devices"
    The screen flashing with information, then the computer reboots.
    Computer Specs:
    PIII 866mhz
    256MB RAM
    ATI 32MB Radeon
    40G HD
    DVD Writer
    CD Writer
    3COM NIC
    SB Live
    I checked in the BIOS - nothing about ACPI.
    I am able to install multiple distros of Linux with no issues. I have not try to install any of the BSD's.
    I tried to install Solaris 8, but I was unable. The issue was an open memory slot. I have 1 256mb memory card.
    I was able to install Solaris 9 but I had an issue with a virus on my Windows side. I had to completly format the drive.
    I have read alot aboiut Solaris 10 and wanted to give it try. I have installed via VMware.
    I am tring to install only the Solaris 10 - no other OS will be on the HD.
    Thank you in Advance,
    Harry

    I don't know why Solaris is so good at finding faulty ram. Windows seems to instal but will crash randomly (Nothing unusual there :) so it's hard to say the memory is bad). I don't really use Linux that much so Ive never run it on a machine with faulty ram.
    If we have a machine which is acting up in windows we simply try to boot solaris. If it fails then we change the ram and it usually fixes the problem. It's just our experience.
    I hope that the second sim fixes your problem
    Good Luck

  • Install oracle10g at solaris 10 x86 platform ORA-07445 error occured

    I meet a problem when install oracle10g at solaris 10.when create database, the dbca display infomation:
    ora-03113 "end-of-file on communication channel"
    ora-03114 ORACLE not available
    Perhaps someone can give me some advices ?
    Its very urgent
    Thanks and Best Regards
    Dillon.xu
    OS: solaris10g
    # showrev
    Hostname: v40-1
    Hostid: 24ea10ed
    Release: 5.10
    Kernel architecture: i86pc
    Application architecture: i386
    Hardware provider:
    Domain: test.com
    Kernel version: SunOS 5.10 s10_74
    v40-1# prtconf |grep Mem
    Memory size: 2048 Megabytes
    database: oracle10g 10.1.0.3
    Oracle trace file info:
    export/home/oracle/product/10.0/rdbms/log/ora10g_ora_1759.trc
    Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
    With the Partitioning, OLAP and Data Mining options
    ORACLE_HOME = /export/home/oracle/product/10.0
    System name: SunOS
    Node name: v40-1
    Release: 5.10
    Version: s10_74
    Machine: i86pc
    Instance name: ora10g
    Redo thread mounted by this instance: 0 <none>
    Oracle process number: 0
    1759
    kstwlb: SGA is no longer mapped
    Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x
    59fffff4
    *** 2005-02-22 14:20:07.861
    ksedmp: internal or fatal error
    ORA-07445: exception encountered: core dump [SIGSEGV] [Address not mapped to obj
    ect] [1509949428] [] [] []
    Current SQL information unavailable - no session.
    ----- Call Stack Trace -----
    calling call entry argument values in hex
    location type point (? means dubious value)

    10g on Solaris 10 isn't yet supported. It is announced for March 2005.

  • Error installing KDE in Solaris 9!

    Hello All:
    I got anerror trying to install KDE in solaris 9 using this command:
    pkg-get -i kde_gcc
    It stars to install via internet, everything is ok, when it reach the koffice_addons packet, it says:
    Analysing special files...
    1109 blocks
    pkgadd: ERROR: attempt to process datastream failed
    -bad format in datastream table-of-contents
    pkgadd: ERROR: could not process datastream from </var/pkg-get/downloads/koffice_addons-1.3-SunOS5.8-all-CSW.pkg.gz>
    ERROR: could not add CSWkofficeaddons.
    ERROR: install of CSWkofficeaddons failed
    ERROR: could not install required dependancies for CSWkdegcc
    Could it be a packet error? I tried downloading the packet in different urls and it says always the same, error, I also tried to install the packet by myself with pkgadd but it gives me the same error, can you help me with this???
    Thank you all!

    Can you try with jreLoc parameter -
    ./runInstaller -jreLoc <path of JRE 1.6>
    You may refer -
    SOA Suite Installation
    Regards,
    Anuj

Maybe you are looking for

  • 10.3.1: System needs a lot of device memory

    Hi, after updating my Z30 from 10.2.something to 10.3.1 I recognized that the System blocks about 6.8 GB of internal memory (Apps: 2.8 GB, User Files: 535 MB taken from device monitor). Any idea why the System needs so much memory and how to reduce t

  • How to set a Collection as a Target Collection

    I am trying to create a new collection but I find that I do not have a "Set collection as target" (or whatever the correct phrase is, since I don't have it.) I have right clicked and examined all menu options. Any suggestions? Message title was edite

  • What is alv report?

    hi guys, i would like to know the functionality of ALV reports.Please help me in this regard. reward points if answered. thanks in advance.

  • Mass change of agreement (MEMASSSA)

    Hi, While assigning the delivery completed indicator to  item level of the Scheduling agreement via MEMASSSA T.code system show the error msg as "Enter rate INR /  rate type M for 16.04.2009(the date is the creation date  of the agreemnt) in the syst

  • Save file dialog - possible?

    Hi! I need to save a file to the clients local file system, so it would be nice if he could choose the directory and file name. I know it;s possible in PHP, so I believe there is something similar in JSF (JSP maybe?). Actually, my application uses AD