Topics not displayed in HTML Help after importing bilingual (Eng, Simp Chinese) word doc

Hi all:
I imported a bilingual (English, Simplified Chinese) word
document (Windows XP) into Robohelp and split topics based on
Headings. This was successful and I could see both English and
Chinese characters in the topic sections.
When I generated HTML Help and reviewed the output, the TOC
was displayed properly, but the topics could not be found for all
topics in the TOC.
I had installed the language packages in Windows XP.
Any suggestions?
Thanks.

I wonder if this is nothing to do with language but because
you are viewing the CHM across a network.
If that is the case, see this article.
http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm

Similar Messages

Why is first topic not displaying in merged help?

I created a merged help system in RH 9, following Peter Grainge's "Merging WebHelp - RoboHelp 8" steps. When I open the default (index) file in the parent, the first topic doesn't display and I get this error in the topic frame:
Internet Explorer cannot display the webpage.
I can click on any topic from the TOC frame and it will display properly.
I did follow Step 8 (Forcing the TOC to synchronise) and made the change to the whthost.js file in the generated output folder for both the parent and the child.
I also tried to search this forum before asking this question, using google as directed since the forum search is broken. But I wasn't able to find anything relevant.
Thanks for your help.
Jenny

When that happens it is almost certainly because the path to the redirect is not right. Check that the relative path is correct and that the target file is where it should be.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Header of a CHM file displayed as HTML Help

Hi,
I have an issue w.r.t the title bar of the chm files for Japanese, Chinese and Russian languages.
As per Adobe support team advice, whenever I have to work on Japanese, Chinese and Russian languages, I am changing the system language setting to the respective language.
As per the settings, I am successfully generating the required chm output. (Correct title of the project is displayed).
When I revert back to English langugae settings, the title bar of the chm file is displayed as HTML Help.
please let me know how the issue can be resolved.
NOTE: I am not able to upload or insert images related to the above issue. The system is diplaying an error.

Hi Muralidhar,
This is because the title for the browser is set to be NewWindow under Windows properties. To change this, please go to—
Project Set-up pod – Window—Right click and Select properties of the Window that you have applied here (in your screenshot, it says ”<None>”)
I believe you have either removed the Window or not applied it from the screen below.
Under your Webhelp Pro/Flash help Pro, you choose the same Window
Let me know if this works.
Thanks,
Anjaneai

Why does RoboHelp 8 crash when compiling merged HTML help after deleting a child project in TOC

Why does RoboHelp 8 crash when compiling merged HTML help after deleting a child project in TOC? I would be grateful for any assistance.
Here's the situation:
-- I recently upgraded from RoboHelp X5 to RoboHelp 8. I upgraded my projects to RoboHelp 8 projects.
-- One large help system I manage is built such that there is one master project and about 25 child projects. Each of these is its own item in the master project TOC.
-- In RoboHelp X5 I never had any trouble deleting these.
-- However now in RoboHelp 8, whenever I delete one (by opening TOC pod, right-clicking on item in question, and clicking Delete), and proceed to "Generate Primary Layout" (MS HTML Help), the generation/compilation process proceeds as far as "Generating full-text search data" and then the whole program crashes!
Am I doing something wrong? Is there a bug in the software? I have installed patches 8.0.1 and 8.0.2.
Once again, I thank you in advance for any pointers.
Matthew Keranen
Jamsa, Finland

That does help - thanks a lot.
Wayne Kroger
State Street Corporation
SQA-Princeton
(609) 580-6264
mail to: [email protected]
The information contained in this email and any attachments have been classified as limited access and/or privileged State Street information/communication and is intended solely for the use of the named addressee(s). If you are not an intended recipient or a person responsible for delivery to an intended recipient, please notify the author and destroy this email. Any unauthorized copying, disclosure, retention or distribution of the material in this email is strictly forbidden.

Weather not displaying in notification center after iOS 5 update not to mention the entire user interface is much more sluggish.

Weather not displaying in notification center after iOS 5 update not to mention the entire user interface is much more sluggish.

Okay, mine now works here is what I did.
plug in the iPhone, iPad etc
in iTunes select the phone or iPad
Under Summary uncheck "Sync with this....."
Under "Music" uncheck the "Sync Music"
Let it remove all the songs, dont worry it will come back no problems.
Once that is all done all the music on the phone or ipad should be gone.
Now check them both back on and everything should copy back onto it.
Working now !!!!!

After conversion & saving in my file, word doc is garbled

Why after conversion & saving in my file word doc is garbled?

Hi mackibee,
How was the PDF created? If it was created by a third-party application (that is, anything other than an Adobe application), then the file may not have the information necessary to ensure a clean conversion. Please see: Will Adobe ExportPDF convert both text and form... | Adobe Community.
You may have better luck if you disable OCR, as this document describes: How to disable Optical Character Recognition (O... | Adobe Community. But that option isn't preferable if the PDF started out as a scanned document, as OCR is necessary to convert image text to editable text.
Best,
Sara

After i convert a pdf to word doc, how do i save it in Word so i can change?

after i convert a pdf to word doc, how do i save it in Word so i can change?

A "picture".
Be well...

RH Window not updating / topics not displaying after repositioning

Hi,
I'm running RH8.0.2 on a 32-bit version of Windows 7. In the last few days I've had peculiar problems with the RH Window itself (not compiled help) not refreshing properly.
For example, I want to compare a Word document to a help topic, so I resize the RH window and position it next to the Word document. I open several topics and do what I need to do. Now I'm done with the Word document, so I maximize the RH window again. This is when the problems start:
The navigation along the top (including the topic tabs) does not refresh.
If I double-click a topic in the left pane, it is sometimes not displayed on the right side, although the cursor movements indicate that RH thinks the topic is displayed. (This is hard to explain, and crazily enough I can't even get a screenshot of this to show what I mean.)
If I reduce the window size back to its previous, smaller size, things look normal again and I can see the topic I just double-clicked. But if I want to use RH in a maximized window again, I have to close and reopen the RH project.
Yes, these problems can be dealt with. But this has been going on for several days now (after a Windows update, perhaps?) and it's getting annoying.
Is anybody else experiencing these problems? Is there a solution?
Thanks
Eileen

Thank you for those suggestions, Peter!
You were right - I was dragging the two windows to where I wanted them.
I haven't yet tested your suggstions extensively (I don't spend a lot of time with RH side by side by side with other applications). However, I haven't seen the problem since I started using Windows key + arrows to position the windows.
BTW, RH is the only application where I was having this problem.
I will post again (or edit this post) if I come up with any new information. Even if no one else has posted about this problem, I'm betting that others are experiencing it. As I said, it's relatively easy to work around. Just annoying.
Thanks again!
Eileen

UPK preview topic not displaying after being published

After preview topic loads, it will not display. We have already disabled popup blocker. Any help would be appreciated..

Hello,
Please log a support ticket using My Oracle Support (http://support.oracle.com/). They will be able to assist you.
In the meantime, I would suggest publishing to the Player style to test the content and to see if you have similar problems launching content. If you have similar problems, it might be a bit easier to see what's happening since you can keep trying to open the content without going through the preview.
Best regards,
Marc

Robo 5 generated Help File (CHM) is not displaying the target Help page

Hi,
I am using Robo 5. AFter generating the CHM file and linked to the target application, the CHM file is not displaying content for a specific page.
The concerned topic, for which the CHM is not displaying content, is included in TOC also.
When the target topic in the TOC is clicked, the CHM file is displaying the following message: Navigation to the webpage was canceled.
Can anybody tell me why it is happening like that?

Does it display OK if you open the help independently of the application?
If it does, then the problem has to be in the call.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

Office 365 Outlook 2013 client not displaying embedded HTML graphics in message body

I am using Office 365 Outlook 2013 client for Gmail and my Service Provider e-mail through POP/ SMTP configuration.
The e-mail message is not displaying the embedded HTML graphics.
How I can I get it to display the embedded graphics?
I have no problem when I was using Outlook 2007 client, when got this problem after I started using Outlook 2013.
Please helps.

Thank you for sharing your solutions and experience here. It will be very beneficial for other community members who have similar questions.
Tony Chen
TechNet Community Support

Image not displayed in html output used webservice to store in a location

hi
we have used webservices to store the pdf and html outputs but the problem is when we are seeing the preview in the bi publisher we can see the image in pdf and html but when we run through webservices and see the output files that are stored in some location image in the html output is not displayed but in the pdf we can see the image.
i have used the direct insertion image option in the header section. is the problem because i have used the direct insertion.
can you give the idea how to import logo from an external location so that we can check the if it is problem with direct insertion or problem with the webservice as we are storing the output files outside the catlog but it may not be wrong because in pdf we can see the image.
I am not having any idea how to solve thsi issue..
Sorry to bother you with these many questions
Thanks in Advance
Have a Nice day.

Please state which BI Publisher version you are using.
In case it is 10g then please always test the application with the latest patch first!.
BTW today there is been a new patch 11846804 released for 10.1.3.4.1 (March 2011).
regards
Jorge

Image not displaying in HTML email upload

Hi there,
I've uploaded a HTML email into E10 and linked all images as per the standard process however one is just not displaying. It appears when I look at it in Eloqua, and when I do a preview but when I send a test email it won't and just leaves a blank black box. I'm not sure how I need to remedy this, anyone else come across anything similar?
Thanks
Marika

Hi Marika,
From experience, in the majority of cases this happens when the Outlook HTML rendering engine isn't playing nice with your design. If you are using this client, have you checked the email on other clients or webmail (Gmail, Yahoo!, etc) to confirm? Support can usually help for emails created through the WYSIWIG editor, but custom HTML uploads would need to be reviewed by the person who authored the code. If you can pinpoint it to a particular email client, there are usually quite a few resources online that can provide guidance. Check outHTML Email Design Resources
The first thing I typically check out is whether the image is vertically and horizontally aligned with the elements near it, because Outlook has a tendency to put things into its own tables and slight misalignments can dramatically change the final code. If you're having recurring issues like this, investing in analysis tools like Litmus can be worth it.
Regards,
Bojan

Index style not displaying the chosen option after publishing

Hi Folks,
I have been adding new albums to one of my web pages and had chosen the Black ringbinder Index style for the albums. After a recent publishing upgrade and visiting my site I noticed that all the albums had framework boxes with ? marks all around and did not display the chosen index style.
I went back to iWeb and chose a Brown sort of "Wedding Album" style and re-published. Everything was OK so once again back to iWeb and set them all to the Black ringbinder Index style and re-publushed.
Same problem with ? marks all around each album.
Any ideas for fixing?
Thanks
Douglas

Hi there
The simplest way to specify a relative path is to avoid any browsing you may do to find whatever file you are linking to and quite simply type the file name into the dialog. Once you have done this, you simply ensure that the file is present alongside the Captivate movie so that during playback it can find the file.
I think where most folks make a mistake is when they use the dialog to browse to and choose the file they are linking to. When you do that, Captivate dutifully inserts the path leading to the file on your own hard drive. This means that the file would need to be stored the the exact location using the same drive letter on the end user's PC for things to work in the end.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Safari on iPad does not display GIF image anymore after upgrade to iOS 4.3

1) Could anybody (especially those in Apple iOS or Safari teams) advise me why the Safari on my iPad cannot display some images (probably in GIF formats) on some webpages anymore, after I upgrade my iPad to iOS 4.3? These images on the webpages can be properly displayed on when my IPad runs with iOS 4.2.1. There should be no problem with these embedded image files because they can still be properly display in Safari running on my Macbook air.
2) Is there any solution to this problem?
3) Is it possible to downgrade my iPad back to iOS 4.2.1?

I am having the same issue with two different ipads (one Wifi and one Wifi-3g) running on our home network (Verizon FIOS). The website in question is www.tvwc.com and the main logo in the upper left corner, a .gif, does not display, only a "?". Other images on the site, in .jpg format, display correctly.
I was running 4.2.1 and am now just upgrading to 4.3.

Topics not displayed in HTML Help after importing bilingual (Eng, Simp Chinese) word doc

Similar Messages

Maybe you are looking for