Tops 5 sales Conditions

Hi All,
Am Creating a Tops 5 sales customers  query based on conditions .But when am pulling to xcelsuics based on Universe , QAAWS  is not working , I know webi and crystal one to solve this problem , But rather than that is there any solution for this problem? . I have gone some forums, in that they are giving some MDX query format s. But I don t no, where should I put these Conditions please explain me step by step as well if there is any other solution for this please explain me .
Thanks
Praveen

Hi
Still trying MDX query format . But i solved through Live office
Praveen Yagnamurthy

Similar Messages

  • Top 10 Condition and Zero Suppression

    I have a query that has a zero suppression turned on, so that rows/columns that have no values are suppressed.
    I have added a condition to the query such that only the top 10 are displayed.
    The problem is that the condition appears to be applied after the zero suppression. The result is that when the top 10 are displayed, it is displaying blank columns, as there may be values in a column, but none of them fit into the top 10 criteria.
    Does anyone know how I can suppress the zero columns/rows when the top 10 condition is active as well.
    Thanks in advance for any assistance.
    Regards
    Richard

    Hi Anil,
    Thanks for the response.
    Unfortunately the column(s) that are to be hidden will change depending on the data, so this will not work.
    ie. if you consider a query that has products on the rows, customer across the top, and there is a top 10 condition on the net sales of the product, so I will always have 10 rows of products, but the number of columns will vary, depending on how many customers have bought that product.
    Thanks again for your suggestion.
    Regards
    Rich

  • Query with Top N Condition (Result Row)

    Hi,
    I made a query with an active top n condition. The query has 2 Keyfigures and 1 formula
    Gross-sales acutal | Gross-sales previous year | Previous Year %
    So that to result line is correct, I had to say "Calculate result as summation" for the keyfigures
    gross sales actual and gross sales previous year. That works.
    I have the problem with my formula. the formular for previous year % is defined as follows:
    gross sales actual %A gross sales previous year
    Example Top 3 Customer
                        gross sales actual          gross sales prev. year         prev. year %
    Cust 1          100                                   80                                       125 %
    Cust 2          90                                     45                                        200 %
    Cust 3           80                                    60                                        133 %
    Result          270                                   185                                       142.8 % ( 350 * 100 / 245 )
    The result of 142 % is the correct result without the condition top 3. with the top 3 condition
    the result should be 270 * 100 / 185 = 145.9 %
    Additional customer without top 3 condition
    Cust 4          50                                       40                                        125 %
    Cust 5          30                                        20                                        150 %
    It shows the correct result for each single line. The result in the result row is wrong. it is calculated
    without taking the active condition. the formular calculates
    with the total gross sales actual and the total of gross sales prev. year.
    is there any solution the achieve the correct % in the result row?
    thanks for your help.
    Pascal

    Pascal,this is a known behavior with conditions.When you apply condition it just hide the extra rows and it does not impact the result row.So your result row actually shows the value irrespective of the condition you apply.
    Now with the help of local functions like calculate result as summation you can show the correct sum after applying the condition but when you try to use that result in some calculation then it takes the original value thereby discarding the calculated value.
    Same is happening in your case as well.Its taking the original value i.e 350 and not the calculated sum after condition i.e 270.
    Hope this helps.
    Regards,
    AL

  • List of all sales condition records(VK13)  with a particular tax code

    Hi all
    We have a requirement to list out all  sales condition records created through VK11 which has a particular tax code in it.Say list of all condtion records which have tax code as 'IA'. Could you please let us know the easier way to pull out such report.
    We understand that we can get such list from tables KONV and KONP but we are not able to correlate output from such tables with condition record display in VK13. Any pointers to this would be highly appreciated.
    Regards,
    Santosh

    Hi,
    Use KONH and KONP tables. condition record whole information will be stored in these 2 tables.
    In KONH table you will get header information of the record. like condition type,condition table, created date and validity periods. In varkey field sales area and material other info. .. Note the record number 0000007609.
    Goto KONP table, enter same record number in condition record number field. you will get item level information.
    Regards,
    Chandra

  • List of sales condition types for a material

    Hi,
    I have a material and maintained pricing and discount condition types for that material. I guess VK33 helps to view what condition types maintained for that material.
    However when I tried VK33 and selected the material from the conditions from the node on the left hand side and entered the sales org, dist. channel and material and executed after I clicked on the display icon on the condition type, Sales org, Dchl material no conditions are displayed.
    Please let me know how I can view the list of sales condition maintained for a specific material.
    Thanks.

    Hi Giri,
    Thanks for the response.
    In VK13 I should enter the condition type then I can hit condition information so that the details of all records maintained for a specific condition type will only be displayed but not for other condition types.
    In V/LD, I am getting the list only for individual prices. If I insert 17 u2013 Discounts and surcharges by customer or 18 u2013 Discounts and surcharges by material, I am unable to get the list. Is it anything because of the u2018release statusu2019?  We had not checked the u2018release statusu2019 field for the tables assigned to access sequence for the condition types.
    As per the requirement business wants to view the list of u201CDiscounts and surcharges by customer/materialu201D. I think this is possible if I run the report provided by inserting values 17 or 18 but the unable to view the list. Any config settings required to activate?
    Please let me know how to view the list of condition types.
    Thanks

  • How to generate Top sales report from SAP data ?

    Hello experts,
    I am completely a newbie to SAP BO , can any one guide me how to generate TOP sales of the year report from SAP data ?

    Hi David,
    First Let me know the Source & Tools to involve.
    Let me go with the generic approach:
    If the source is BW, then you can create the logic in query designer designer and then you can incorporate the data into the dashboard or webi or crystal report whatever its.
    If the source is sql or anyother DB then it can also be achievable in crystal or webi to write the logic in top 10 values by ranking then you can incorporate the data into the dashboard, but here you can limit the top or bottom values.
    Hope this helps, please revert for more clarifications on this.
    --SumanT

  • About the top N condition in WAD web template

    Hi all experts,
    I'm facing a problem in my WAD web template. Hope you guys can give me a hand.
    In my web template, there is analysis item A and B.
    Table A are used to display top 3 customers(char) with highest purchase rate % (KF), I'm using top N condition to select top 3 customers.
    And table B is to show all customers with purchase rate, sorted from highest purchase rate to lowest (logic:- sort the KF(purchase rate) in descending order)
    The problem is when there is many customers with purchase rate = 100%(more than 20 customers), then for the 1st-3rd customers of table A and B, the selected and sorted customers results are not the same, shouldn't that they should be identical for the 1st three rows as they are trying to show customers with highest purchase rate? even though table A is using top 3 condition and table B is using descending sorting for purchase rate.
    For example:- Top 3 customers in table A and all customers in table B
    Table A                                            
    Customer       Purchase rate             
    c3                  100%                             
    c1                  100%                            
    c5                  100%                                                                               
    Table B
    Customer    Purchase rate
    c2              100%
    c3              100%
    c4              100%  
    c1              100%
    c5              100%
    c6              81%
    c7              58%
    In this example, table a and b have selected different customers for 1st to 3rd position, i'm trying to make them showing identically. Any suggestion?
    Perhaps you guys can give me some idea on how does the top N condition determine the TOP 3 customers if there is many customers with 100% purchase rate as in this case.
    Thanks a lot,
    Eric
    Edited by: Eric Tan on Aug 12, 2008 10:49 AM

    When u create conditions, you have tab called CHARACTERISTIC ASSIGNEMENT.& other is GENERAL..which is like in what way you want to create conditions i.e based on which characteristic or whole characteristic in rows etc...you try choosing those option in that tab, so that you can find some ideas..

  • Data Source Sales Conditions CRM

    Hi all,
    I need a data source for CRM sales conditions. Are there any standard data source for this information?
    This information is in the tcode crmd_order in the CRM system, image attached.
    I found another source of data (0CRM_SALES_ORDER_I) but only has items sales, I need the conditions.
    Thanks
    Regards,
    Jacob

    Thanks for the reply,
    You can not expand the data source because they have different levels of detail.
    The main table is PRCD_COND but there are more.

  • AFS-Retail Interface-Pricing Conditon Proces (Sales Condition - INFORECORD)

    Hi Experts,
    We are working on Integration between AFS and RETAIL systems.
    We are facing Issue in Sending Sales conditions (VK13-VKP0) from the AFS side,  Transfer over to the Retail side as  INFOREORD.
    What settings (Configurations) are required in AFS & Retail system ?.
    When Sales conditions (VK13) are sent in AFS what is the Message Type to be Used ?.
    Any Input is highly appreciated.
    Thanks and Regards,
    Selvakumar. M

    Hello Marat,
    Did you meant Pricing Info records. If yes, it need to be maintained at the AFS side. When interfacing the materials from AFS to Retail using BD10, you can use the option 'Send Material in Full' to send the prices also.
    The prices can be maintained using the transaction VK11. It can be maintained on the material level and also on SKU level. When interfacing as mentioned before, INFREC and COND_A IDocs will also be generated.
    Hope this address your query.
    Regards
    Sudha

  • Top Rentals and Top Sales Categories Gone?

    Rebooted my Apple TV this morning. Went in to see about renting a movie or two. Noticed the Movies section was looking different...
    Not a huge deal, just wondering if anyone else notices this morning that the Top Sales and Top Rentals categories are missing from the Movies...Top Movies... section of their Apple TV.
    Does anybody know what happened, might have happened, or if I should be troubleshooting anything on my system?

    just checked again. they're back now. weird...

  • Info Record link to Sales Condition Record

    Is there a way to link a purchsing info record price to a sales condition record price? If we buy/sell a part and update a new purchase price, is there any way to automaticlly udpate my sale price?

    Check this link, which can help you Re: MEK1 to VK11
    Regards,

  • Prevent duplicate sales condition entry

    Hello friends,
    We have a condition called ZPRG which is a condition allowing the manual entry of the total price. This condition needs to be entered and added to the sales order condition in VA01 manually.
    However sometimes some users when reviewing the order and they need to change something they seem to enter the same condition again so that there are two ZPRG conditions, the result is that the two are added and their sum is taken.
    Is there a way to prevent users from doing so? Basically I want to say that ZPRG can only exist once (or 0 times) per sales position in VA01.
    I have searched the forum for this specific problems as well as general restrictions on sales condition and tried to figure out a way but my quest has been unsucessful thus far.
    Thank you for your invaluable help.
    Christoph

    Hi Chris
    well Through standard SAP its not possible to achieve what you are lookign for and as said above even if user enters the same condition twice you can take the value of only one condition in pricing ...
    but in any case what you can do is use this user exit and code it where it will check if the pricing contains multiple condtion type it will throw a warning and not save the document where until user corrects it.
    USEREXIT_SAVE_DOCUMENT_PREPARE ( use this exit )
    Hope its helpful
    Cheers

  • BW not able to resolve "Top N" Condition against Custom Hierarchy in 3.0B

    I have a simple query that is attempt to display the "Top 15" Product Families in a customer BW Hierarchy.
    When I run the query I get a warning message that says BW cannot execute "Top N" queries against hierarchies, but the query runs successfully anyway (this is good).  The query actually sorts all the Product Families in Descending order (based on net sales).  This is good too.  The only problem is the query does not limit the results to the "Top 15" (even though I am sure the Condition is correct because I have done this many times without hierarchies)
    Any thoughts on how to overcome this problem and force the results to be limited to "Top N"?
    Thanks!
    Jim

    Hi Jim,
    I don't think that it will work for hierarchies because the condition checks at all hierarchy levels and tries to apply  the condition independetly so the overall result doesn't gets applied with the condition.
    Hope this helps.
    Don't forget to assign points.
    Venkat

  • Sales Condition, but not totalling to net value in SO

    Hello,
    We have costs which we need to post to certain GL accounts, to do this I created new condition type (not have statistical ticked in procedure). This is for royalty process, whereby every SO which we sell to every customers, we will pay 3% of sales to another party.
    - Problem, if dont tick statistical, wrong values get posted to customer because we're adding 3% to credit customer.
    - If tick statistical, values dont get transfered to accounting.
    Is there any better way we can use to not allow values to be totalled into net value in SO, but still be able to bill and post to accounting?

    You can achieve this requirement by creating New Condition Type ( suppose XYZ ) with Calculation Type as Percentage & Plus/minus as -ve . Add this Condition Type below the Condition Type for Royalty Process (suppose ABC ) with Step Number as the one of  Condition Type ABC in From Column in the Pricing Procedure.
    You would have to mention the Account key for Condition Type ABC & maintain 100 % Condition Record for Condition type XYZ & no Account key should be assigned against Condition Type XYZ.
    Best Regards,
    Ankur

  • Issue in Return sales, condition value calculation.

    Hello All,
         I am creating  return sales order (order type-RE) with reference to a Billing document, and reducing the quantity while creating the sales order (Example: Ref billing quantity-60 and sales order quantity-30). Here even though the quantity is reduced to 30 PC the basic excise duty value shown in the sales order is same as in the reference billing document (with 60 PC quantity).
         In pricing procedure for condition type (basic Excise duty) calculation type used is 355.
    Kindly help me out to over come this issue.
    Regards,
    Manoj

    Your post is not sufficient to understand your requirement.  Let me know whether your client are into TAXINJ or TAXINN.  Also as requested already, share your pricing procedure screen shot.  Moreover, have you checked the Analysis screen from condition tab of that sale order ?  If not, better check there which will give a clear picture.  Finally, ensure that there is no manual condition type JMAN used in billing document in which case, as per routine 355, system will copy that value.
    G. Lakshmipathi

Maybe you are looking for