Toshiba NB200 Unable to browse in internet

Hey everyone,
I have a Toshiba NB200. I am able to connect to a network (tested on home router as well as prepaid 3G USB modem) and I can ping websites in DOS. I cannot browse. I have tested IE and Firefox and both have the same results. I have tested with the firewall off and still no luck.
Any suggestions?
Many thanks in advance!

>What do you mean 'check' the WLAN and LAN? Just connectivity?
I meant that you should check if you can browse in internet using the WLan or LAN connectivity.
Then you will know if there is something wrong with your 3G configuration or with any other windows settings which would prevent the internet browser from showing the online webpages.
> As for the pinging, I'm actually pinging through a 3G prepaid modem USB and I can ping any website ... I just can load them on a browser. I don't have a router sitting between me and the Web, so I haven't tried pinging an local network IP address.
Did you setup the connection correctly?
In IE browser you can check this in Tools -> Internet Options -> Connections tab
Furthermore I would recommend checking the TCP/IP protocol settigns.
For every conenction the TCP/IP protocol can be configured separately and usually it should be set to assing teh IP adress automatically.

Similar Messages

I'm unable to browse the internet at home on my Macbook Pro (10.6.3), even though it shows I am connected to the wireless network with full bars.

This problem began weeks ago, when I suddenly couldn't browse the Internet at home despite being fully connected to the network. The network was a private, password-protected wireless network set up through a Netgear router.
I have spent hours troubleshooting and have tried multiple fixes including resetting PRAM, deleting and re-creating Airport, deleting and re-creating networks, changing IP and DNS, etc. to no avail. My roommate's PC works perfectly fine on the same wireless network.
This seems to be an issue with networks I use long-term. I can connect fine to networks at Starbucks, etc. for short-term use. Also, while trying to troubleshoot my connection issues on my home network over the last few weeks, I'd been using my apartment complex's public wireless connection (no password) with no issues. All of a sudden, I am having the same exact issue with that network. It's like something just snaps and maybe gets configured wrong after a few weeks or months of use.
I am desperate to find a fix, since now I can't use the internet AT ALL while at home and need it for work.
Thank you in advance for your help!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

Unable to browse the internet even though I'm connected the network

I have a new iMac. I can connect to my wireless network via Airport. I can print to my wireless printer but I cannot connect to the internet using a browser (Safari or Firefox). I can ping (e.g., Google.com)successfully but can't connect via a browser. I can connect to a neighbor's unsecured network and browse the internet at will. I have WPA security activated. I have 3 PC's on my home wireless network that connect to the internet with no problem.
I've been on the phone with both Apple and Belkin support all weekend. Apparently the router is working. Apple support has not been able to diagnose my problem. The latest suggestion by Apple technical support is to install Snow Leopard and see what happens.
Has anyone encountered this issue before? I'm new to the iMac world. Always been a PC guy so I'm having difficulty understanding why I can connect to my network but can't browse.

That's interesting I have a similar issue, the wireless suddenly stopped working for me.
I get an IP address assigned, my /etc/resolv.conf file is updated correctly to DNS and I have a properly configured gateway yet I can't ping anything.
This only started happening recently as well.
It is odd that you can ping an address but not surf, have you tried disabling WPA security on your router and seeing if that makes a difference?

Unable to browse internet with wag150n

I recently installed a wag-150n wilress-N ADSL2+ Gateway. I replaces a working 2WIRE router with this one. I ran the setup CD, and it said it completed successfully. I am unable to browse the internet wirless;y or with a wired connection.
If I try and ping a website, say www.google.com, it replies successfully but I cant browse the internet.
Both wired and wirless connections are getting an IP address. I had changed the IP ad DHCP ranges to 192.168.0.0/255.255.255.0 , so that the router is at 192.160.0.1. The clients are starting at 192.168.1.100.
Help!!!!

If you are able to ping the websites address it means your Gateway is configured for Internet Access...Try to adjust the Browser settings...
Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...See if you have Internet Access...
Also if you have changed the router's address to 192.168.0.1, your clients should start at 192.168.0.100...

After Update Unable To Browse Internet On WiFi

Since the update to my Charge I am unable to browse the internet through a WiFi connection. All I get is "Web Page Unavailable". I know that the connection is working correctly as I use it on other computers. Not to mention when I am connected to the WiFi connection, the apps i have installed on my Charge function correctly such as the App Store and I am able to download and update apps through Wifi. The only issue is when I am trying to use the browser to connect to web sites. I have tried the stock browser as well as Dolphin with no luck. Help!

Thanks JCO 23
I too was unable to browse the internet on WiFi. I tried many of the solutions I found on different discussion threads. I read your solution and decided to give it a try. Unbelievable, I did have text in the proxy setting. Checking on my PC I determined I did not require a proxy number. So, I erased the proxy number and I am now able to access the internet through WiFi.
Thank you very much for posting this solution.

Firefox 33.0 unable to connect to Internet

''locking this thread as duplicate, please continue at [https://support.mozilla.org/questions/1025617 /questions/1025617]''
I've just installed the FF33.0 update and I am unable to browse the Internet.
I am having to use another browser on the same laptop in order to access this site.
I have Windows 8.1 installed on an i7 Laptop. I connect via WiFi through my Broadband router. The connection is fine (checked & double checked). I can't even access the GUI of my router through FF33.0 .
I have accessed the Firefox site and downloaded FF33.0 from there. Went through the process (upgrade was selected) and the same problem occurred.

hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
[[Fix problems connecting to websites after updating Firefox]]

MiFi 4510L Problems - unable to browse web but can ping !

Have had stationary 4510L for months since my local store rep convinced me to upgrade my perfectly good 2200. Wish I had never done so. First the 4G/3G connect issues kept me from working until the recent firmware patch was finally released. But mixed in with that issue is another one that has gotten progressively worse. Three replacement devices and two new SIM cards later and I still have the issue. After three (alleged) trips to the tower reporting no issue, I decided to take the MiFi on the road to see if I have same issues on another tower. I do. Anybody else seen these symptoms or have any suggestions?
1) Browsing fine, usually in forced 3G (EVDO) mode due to earlier issue resolved by firmware upgrade.
2) Suddenly web sites stop responding with timeouts, or server unavailable, or web site taking too long to respond messages (depending upon browser in use).
3) WiFi connection is good and I can browse locally to access modem.
4) Modem states to be connected and not dormant, with decent EVDO signal strength.
5) Connection log shows some TCP and UDP traffic.
But cannot browse anywhere. The only fix is to disconnect and reconnect. Then it all works fine. The WiFi connection is never lost. Don't need to reset the modem, just drop the call and then reconnect.
Logged 12 to 15 calls on this and have not gotten satisfactory response yet. Spent hours and hours collecting data on dates, times, screenshots, etc. Two very interesting things that I think would be indicative of issue:
1) Even though I can't browse web sites, I can ping them !!
It's as though internet layer protocols are working but transport layer are not. When I can't browse, I also lose my VPN connection (if a session was established). Cannot reconnect VPN, says the server does not respond, but I can ping it!
And in the Connection Log, I can see the ICMP traffic from the ping, along with TCP and UDP. Yet cannot browse to any website.
2) Once this problem occurs, the clock starts to drift from real time. The time stamps in the Connection Log and in the System Log are a few minutes off, then ten to fifteen minutes off, then withyin a few days they are an hour off. They occasionally show 1980!! A hard reset re-synchs the timestamps to the system clock.
*ANYBODY* have these symptoms or any suggestions? And if you have issue where browsing stops, but WiFi is still wokring, try pinging the website and see if you get a response. I'd like to hear form you.

I have the *exact* same problem. Been happening for months and nobody at Verizon has a clue. I am going insane!!! My problem is especially worse when I have more than one WiFi client connected. "Stop browsing" means unable to browse the internet. I can still browse on the local MiFi private network fine. Just can't browse thru the Verizon network!
One laptop will stop browsing (but can still ping!!) while the others are working just fine. Dropping the wireless and reconnecting doesn't fix it. Rebooting the laptop doesn't fix it.
One client can browse but the other can't (but both can ping) and there is nooooo way to fix it but disconnect the call and then reconnect. FRUS.STRAT.TING !!!!!
Happening now five or six times per day. We may have two to four laptops connected at any given time. Mostly we just do w/o internet on the clients when they stop browsing. The other laptops will continue to browse for quite some time. Eventually, when the working systems have an opportunity, we have to drop the MiFi call and reconnect to restore internet to everybody.
THIS IS KILLING ME.
I cancelled my voice service this week and transferred to ATT. T-mobile has a $40/month 5GB plan that does not charge for overages. I'm considering switching to that. Verizon, how many customers will you lose before you get your act together?
MiFi 4510L - replaced twice, latest one is three weeks old
Modem Firmware - 2.16.07 (the latest),
Using EvDO with better than -80 signal strength

Unable to connect to internet using time capsule

Over the last couple of days I have run into a peculiar problem. I am able to connect to the internet when I connect the ethernet cable directly to my computer. Now when I use time capsule to connect wirelessly, the connection either does not get established or if it gets established fails after a few mins and I am unable to browse the internet. I have noticed this problem especially after Mac OSX 10.6.3 update. I did not have this issue earlier. I am not sure if this is the root cause but would surely like some help.

This behavior may indicate that you are picking up wireless interference from cordless phones, another wireless network, security system or other electrical device. It's hard to pinpoint the exact cause.
Suggest that you start by downloading iStumbler and using the application to display your signal strength and noise on your network. What values do you see for each of these?
Also look at any other networks to see if they might be using the same channel or an adjacent channel as your wireless network. If so, change the channel on your wireless network so that it is as far away as possible from other networks.
If you have cordless phones, turn them all off for at least an hour when you can to see if your network performance improves.
Interference robustness often does more harm than good. Try turning it off. However, if you find that your network performs better with it on, that is an almost sure sign that wireless interference is occurring on your network.
You won't be able to do anything about cordless phones at your neighbors (my neighbor...across the street...can knock me off my wireless network if he is in his front yard with his phone and it rings). Users far underestimate the effect that cordless phones have on their wireless networks.
Post back with your findings when you have tried a few things.

Unable to browse internet over wifi on my iphone

I am unable to browse internet on my iphone 4 and ipad3 simultaneously over wifi.
Both iphone and ipad show connected over wifi but only my ipad can connect to internet. Along with ipad I have no problem in connecting laptop and my other android phone over wifi and browse but iphone won't.
I am using talktalk broadband. Please help

Does your phone receive a valid ip address from your router?
Does it work fine when connected to other wifi networks? If so, then I'd say your router is the culprit.

Connected with wifi but unable to browse internet on my iphone 4

my iphone 4 is connected with wifi anf it shows proper connectivity but i am unable to browse internet on my device ,i have tried many things suggested by apple support forum and nothing has worked for me so for. i have reset settings for network many times. also this wifi is working fine on my mac and other IOS devices.

I would verify each smtp setting in the settings email account with the settings
provides by the email provider to verify that those still matched

TS3276 On iMac with Mountain Lion I am now unable to send but can receive e-mails. Previously worked fine. I use an iCloud acct and Safari browser. Internet connection is wireless via cable modem. Any suggestion? Thanks.

On iMac with Mountain Lion I am now unable to send but can receive e-mails. Previously worked fine. I use an iCloud acct and Safari browser. Internet connection is wireless via cable modem. Any suggestion? Thanks.

Hi tarifiq and welcome to the BlackBerry Support Community Forums!
Can you send me a private message with your PIN so I can check this out for you?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Unable to charge Toshiba NB200 at all

Hi,
I recently bought myself a Toshiba NB200 and after the battery finally ran out, I tried charging it but to no avail. When I plug in the charger, the plug light at the bottom with all the other kinds of lights(HDD light, battery light etc.) shone green whilst the battery light was orange the whole time even though I had left it for a long time. Everytime I tried to turn on the computer whilst 'charging', I could only get as far as the windows start up page when it turns off itself due to low power.
What problem am I experiencing because it seems weird that the plug light is green whilst the battery light is still orange after a long time.
Is there anyway I can solve this problem or any alternative method if this problem can't be solved?
(Well a point to take note of is I bought my laptop in Thailand and it charged well but when I brought the laptop back, I can't charge it but the thing is I've brought my previously Thailand bough laptop back to Singapore and it worked fine, so I do not think its anythign wrong with the laptop being from different country and all)
Thanks in advance to any help. :D

I have a NB200-110 that will no longer charge. I have replaced the battery & AC charger & it still won't charge! I have 26% battery life left before the battery dead & I can't switch it on! Any idea what the problem could be? (if Popsicle could you copy a reply to my email address - [email protected]) thank you

My iPad air keeps crashing and freezing when browsing the internet . Please help :(

My husband and I updated to the new OS. Now our iPad Air's keep crashing and freezing whilst browsing the internet. We have done a reset and swiped away pages but nothing is helping. Its very frustrating Can anyone help? Thank you Jo

Please tell me that it has NEVER been jailbroke. If it has not been jailbroke, here are some standard repair procedures:
First, confirm that this is what you did for a "reset." Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, since you have IOS-7, read this.

My Firefox won't let me browse the Internet, even though I'm connected to the Internet.

Excuse me, but my Firefox 3.6 just randomly stopped working. It won't let me browse the Internet anymore-- the error message it always gives me is "Unable to connect", even though I'm fully connected to the Internet. Earlier I opened up Safari and Internet Explorer 9-- both, in which, let me browse the Internet, and I had a full connection. But, whenever I use Firefox now, it says "Unable to connect". And every time I type in a URL on it, Firefox gives me the ''SAME'' error message. I don't know what to do now. I uninstalled and reinstalled Firefox and it does the same thing. So now I am stuck with using Safari, when I really wanna use my Firefox. Why is it doing this?

Make sure you are not set to Work Offline in File menu.
There is a possibility that your connection dropped even briefly, more so if using wireless. Make sure Firefox is not set to "[v] Work Offline" in File menu just above Exit.
By default, Firefox 3.5 and 3.6 will automatically use offline mode if there is no network connection. Under certain conditions, after the connection is reestablished it may remain in offline mode without the user's knowledge. Firefox 4 and newer prevents this behavior by default. To prevent this behavior in versions 3.5 and 3.6, add an entry to the '''about:config''' options, as follows.
* Type '''about:config''' in Location (address) bar
* Right-click on the about:config page to open the right-click context menu and use "New > Boolean" to create a new Boolean preference. Name: '''network.manage-offline-status'''. Value: '''false'''
http://kb.mozillazine.org/Error_loading_any_website#Work_Offline_Setting

Users unable to access the internet sites

Hi Everyone,
We have users who are able to get the IP address but unable to access any internet sites.
I check the trap logs on the WLC
RADIUS server 192.168.50.1:1812 failed to respond to request (ID 16) for client 88:53:2e:99:24:b5 / user 'unknown'
RADIUS server 192.168.50.1:1812 activated on WLAN 1
RADIUS server 192.168.60.1:1812 deactivated on WLAN 1
RADIUS server 192.168.60.1:1812 failed to respond to request (ID 200) for client 88:53:2e:99:24:b5 / user 'unknown'
RADIUS server 192.168.60.1:1812 activated on WLAN 1
RADIUS server 192.168.50.1:1812 deactivated on WLAN 1
RADIUS server 192.168.50.1:1812 failed to respond to request (ID 15) for client 88:53:2e:99:24:b5 / user 'unknown'
RADIUS server 192.168.50.1:1812 activated on WLAN 1
RADIUS server 192.168.50.1:1812 failed to respond to request (ID 16) for client 88:53:2e:99:24:b5 / user 'unknown'
RADIUS server 192.168.50.1:1812 activated on WLAN 1
RADIUS server 192.168.60.1:1812 deactivated on WLAN 1
RADIUS server 192.168.60.1:1812 failed to respond to request (ID 200) for client 88:53:2e:99:24:b5 / user 'unknown'
RADIUS server 192.168.60.1:1812 activated on WLAN 1
RADIUS server 192.168.50.1:1812 deactivated on WLAN 1
RADIUS server 192.168.50.1:1812 failed to respond to request (ID 15) for client 88:53:2e:99:24:b5 / user 'unknown'
RADIUS server 192.168.50.1:1812 activated on WLAN 1
Need to know how can i troubleshoot this further?
Regards
Mahesh

I would do the troubleshooting in following sequence.
1. Put a wired PC on to the vlan allocated for WLAN1
2. Check whether wired PC gets an IP & can browse internet
3. If that works, then we know no issue of DHCP & not issue with L3/NAT routing to access internet
4. If step2, does not work then your issue is not within wireless, you have to change the focus of your troubleshoot.
5. If step2 works, then test a wireless client with OPEN Authentication (No ACS involvment).If this does not work,then it means wireless client does not get proper IP connectivity. Check dynamic interface configuration for this WLAN & make sure gateway addresses correctly configured. Also VLANs are trunk across to WLC from switch.
6. If step5 works, then try your client with ACS & see the client get successfully authenticated. If not it may be WLC to ACS issue. Troubleshoot that in that case.
Do some troubleshooting like this & let us know the outcome. I am sure you will abe to find out the issue easily in this way.
HTH
Rasika

Toshiba NB200 Unable to browse in internet

Similar Messages

Maybe you are looking for