Unable to browse internet with wag150n
I recently installed a wag-150n wilress-N ADSL2+ Gateway. I replaces a working 2WIRE router with this one. I ran the setup CD, and it said it completed successfully. I am unable to browse the internet wirless;y or with a wired connection.
If I try and ping a website, say www.google.com, it replies successfully but I cant browse the internet.
Both wired and wirless connections are getting an IP address. I had changed the IP ad DHCP ranges to 192.168.0.0/255.255.255.0 , so that the router is at 192.160.0.1. The clients are starting at 192.168.1.100.
Help!!!!
If you are able to ping the websites address it means your Gateway is configured for Internet Access...Try to adjust the Browser settings...
Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...See if you have Internet Access...
Also if you have changed the router's address to 192.168.0.1, your clients should start at 192.168.0.100...
Similar Messages
-
Unable to browse Internet with Sol10 GA
I successfully installed Solaris 10 GA on a Dell GX400. I can see other computers on my network, but when I try to access the Internet, I get errors indicating that the browser cannot find the URLs I input (including sun.com). I cannot see any problem in my nsswitch.conf, resolv.conf, or defaultrouter files in /etc.
Any suggestions about what could be the problem?
Thanks!
JDFFirst, try 'netstat -nr' and check that you really have the correct default route. Then try 'dig www.sun.com' and check that the correct DNS server is being contacted.
-
Connected with wifi but unable to browse internet on my iphone 4
my iphone 4 is connected with wifi anf it shows proper connectivity but i am unable to browse internet on my device ,i have tried many things suggested by apple support forum and nothing has worked for me so for. i have reset settings for network many times. also this wifi is working fine on my mac and other IOS devices.
I would verify each smtp setting in the settings email account with the settings
provides by the email provider to verify that those still matched -
Unable to browse internet over wifi on my iphone
I am unable to browse internet on my iphone 4 and ipad3 simultaneously over wifi.
Both iphone and ipad show connected over wifi but only my ipad can connect to internet. Along with ipad I have no problem in connecting laptop and my other android phone over wifi and browse but iphone won't.
I am using talktalk broadband. Please helpDoes your phone receive a valid ip address from your router?
Does it work fine when connected to other wifi networks? If so, then I'd say your router is the culprit. -
I am lost: I did install iOS7 a couple of days ago, and right now, while browsing internet with Safari, the screen turned black suddenly, and I can't reactivate it anyway (buttons death, screen death)
Thank you very much!
During the minutes needed looking for help, I decided to put the magnetic cover on the screen again, and I connected the iPad to the charger. Whe I did uncover the iPad now for a try with your tip (hold sleep and home buttons for about 10 seconds), it came to life again.
Thank you.
Best regards,
Lorenzo -
Unable to browse internet on a domain user's computer through ASA 5503 Firewall
Dear All,
I am trying to configure my new firewall for the last one month but still unable to fix it. I have a domain in windows 2012 standard edition and the firewall with unlimited license. Here is the output of show startup-config. Please note that prpgb.org is my local domain.
prpgbasa# show startup-config
: Saved
: Written by enable_15 at 02:50:45.169 PKT Thu Nov 20 2014
ASA Version 8.2(5)
hostname prpgbasa
domain-name prpgb.org
enable password AExqpLntfuzsVQrq encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.0.0.0
interface Vlan2
nameif outside
security-level 0
ip address 202.142.XXX.YY 255.255.255.252
ftp mode passive
clock timezone PKT 5
dns server-group DefaultDNS
domain-name prpgb.org
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 202.142.XXX.YZ 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 10.0.0.0 255.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 10.0.0.0 255.0.0.0 inside
telnet timeout 5
ssh 10.0.0.0 255.0.0.0 inside
ssh timeout 5
console timeout 0
dhcpd dns 10.0.0.2 255.0.0.0
dhcpd dns 208.67.222.222 208.67.220.220 interface inside
dhcpd lease 86400 interface inside
dhcpd domain prpgb.org interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:23c0af4b2ddf9e925f83ce13909ab900
prpgbasa#
You all are requested to have a look into the problem and suggest me the modifications.
ThanksDear All,
I have solved the issue. I have done the following in-order to browse internet on domain user computers. Here are the steps
1. I have disabled my internal DHCP server in the domain.
2. Then I have configured the ASA DHCP server in the default IP address scheme i.e. 192.168.1.100-200
3. I have Connected my ASA to a switch first then from there I connected a cable to my Domain's Server WAN interface. The LAN (192.168.1.2)interface of the Domain server is also plugged into the same switch.
4. I am using my Domain Server's DNS for name resolution and forward queries which are not served by my domain to open dns server.
It works perfectly so far but before applying or setting up the entire netowrk i want your help to look into the configuration file for corrections if i am making any mistakes. Thanks again for your help and here is the output of show confing.
prpgbasa# show startup
: Saved
: Written by Ghaffar at 02:11:24.319 PKT Mon Dec 8 2014
ASA Version 8.2(5)
hostname prpgbasa
domain-name prpgb.org
enable password AExqpLntfuzsVQrq encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ddns update hostname PRPGB.ORG
dhcp client update dns server both
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 202.142.XXX.YY 255.255.255.252
ftp mode passive
clock timezone PKT 5
dns domain-lookup inside
dns server-group DefaultDNS
name-server 192.168.1.2
domain-name prpgb.org
object-group network obj_any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 202.142.XXX.YY 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication enable console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.100-192.168.1.200 inside
dhcpd dns 192.168.1.2 interface inside
dhcpd lease 86400 interface inside
dhcpd domain prpgb.org interface inside
dhcpd update dns both interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username ABC password FL01QCj0LaLWTID0 encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:7c4930a079158c0cb10a42813d3690cd
prpgbasa#
Please suggest me if there are any recomendations.
Thanks in advance.
Ghaffar -
After Update Unable To Browse Internet On WiFi
Since the update to my Charge I am unable to browse the internet through a WiFi connection. All I get is "Web Page Unavailable". I know that the connection is working correctly as I use it on other computers. Not to mention when I am connected to the WiFi connection, the apps i have installed on my Charge function correctly such as the App Store and I am able to download and update apps through Wifi. The only issue is when I am trying to use the browser to connect to web sites. I have tried the stock browser as well as Dolphin with no luck. Help!
Thanks JCO 23
I too was unable to browse the internet on WiFi. I tried many of the solutions I found on different discussion threads. I read your solution and decided to give it a try. Unbelievable, I did have text in the proxy setting. Checking on my PC I determined I did not require a proxy number. So, I erased the proxy number and I am now able to access the internet through WiFi.
Thank you very much for posting this solution. -
Unable to browse Internet after upgrading to IOS 6
After upgrading to IOS 6 (6.0.1), I have this strange issue.
My iPhone suddenly after every alternative day stops browsing Internet. It connects to wireless succesfully but fails to browse Internet.
I need to reset my network setting and reconnect to the network. But this is annoying any suggestionsDoes your phone receive a valid ip address from your router?
Does it work fine when connected to other wifi networks? If so, then I'd say your router is the culprit. -
I can't browse Internet with Arora [solved]
Hi.
I installed Arora this night, I really like it now. But I deleted my ~/.config/arora*/, and since this, I can't browse the Internet, but with Firefox it works. I want to use Arora instead of Firefox, does anyone know what I can do ?
I already remove this, re-installed (-Rd, -Rs, -S) but nothing changes..
Thanks in advance
Last edited by Cr0k (2010-03-13 09:21:42)I've got it !
It's just when AdBlock is activated, I can't go to any websites, even the default page of Arora. I don't understand why, because I use the same filters on my firefox, and it works.
It's now solved -
Unable to browse Internet for any length of time
I am having constant screen blackouts in Chrome where I am redirected back to my home screen (desktop).
Facebook seems to work fine, this happens when I click on a link that opens in Chrome.
Could it be a Chrome problem or a lack of phone coverage in my house?
No big issue with email or Youtube. Rarely, the screen will black out and redirect to the home screen (desktop).
I have cleared the data and cleared the cache in Chrome many times but the problem continues.
I have tried different rooms and the browser always crashes after about 30 seconds.Hi Lorenzo1950- Let's keep your Chrome bright and working! It appears from your post that you are using the Mobile Hotspot on your Razr Maxx, am I correct? If your other data services are working well it would indicate that the issue is with your Chrome browser. Have you confirmed you are running the latest version of the Chrome browser?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport -
HOME#sho run
Building configuration...
Current configuration : 5657 bytes
! Last configuration change at 10:51:11 UTC Fri May 17 2013 by admin
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname HOME
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
enable secret 5 $1$bgx9$VrtQW3Wg182VyYhKAHLbN.
no aaa new-model
memory-size iomem 10
crypto pki trustpoint TP-self-signed-1190003239
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1190003239
revocation-check none
rsakeypair TP-self-signed-1190003239
crypto pki certificate chain TP-self-signed-1190003239
certificate self-signed 01
3082024A 308201B3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31313930 30303332 3339301E 170D3133 30353137 31303333
35315A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 31393030
30333233 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100C002 80BBF151 E095E469 AA7DBB18 2A9E3CC2 4AC223F6 ABE0AF49 876C1203
65D0E246 786F174D E5B7897A 44C5755A 2571E58A 184A6C62 DD992A2A D8A24878
25A8D3C3 03F5D3C2 522EC8BB 302B0CCD 2945087A 7AF01418 D0056679 6F64DB4A
BE2D5DA1 106CD03A 83B422A2 3CCBAE88 F2413123 12269390 6949DFE0 411118E7
8F210203 010001A3 72307030 0F060355 1D130101 FF040530 030101FF 301D0603
551D1104 16301482 12484F4D 452E7777 772E7961 686F6F2E 636F6D30 1F060355
1D230418 30168014 3D2D854D 1203F50D 77F4ABC5 B61CEAF6 C922F4DF 301D0603
551D0E04 1604143D 2D854D12 03F50D77 F4ABC5B6 1CEAF6C9 22F4DF30 0D06092A
864886F7 0D010104 05000381 8100B24C 48BACACE 87ADEA03 386F2045 CC89624A
4EB1AD09 062EB2A4 CF4C96CA 0B2CF001 BD2C3804 8DC47FED 6A5B5F0D 3965AC6E
4FC4682F 707E4132 8F27C083 C7FAE1BD 21D055E6 C79D5DAD 051B6321 D35DB4F2
044E6BBD DAD08B6A 6ED87C7E 08F4F7E1 4EFDFB6F 867AF6FA 84165CFC D219D56F
A82EABD4 AD9CFA24 A5088145 E571
quit
ip source-route
ip routing protocol purge interface
ip dhcp excluded-address 10.10.10.1
ip dhcp pool ccp-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
domain-name www.google.com
dns-server 192.168.1.1
lease 0 2
ip cef
ip domain name www.yahoo.com
ip name-server 84.235.6.55
ip name-server 84.235.57.230
no ipv6 cef
multilink bundle-name authenticated
license udi pid CISCO881-SEC-K9 sn FCZ1516933C
username admin privilege 15 password 0 cisco
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
ip address dhcp
ip access-group 101 in
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip nat enable
ip virtual-reassembly
ip tcp adjust-mss 1452
interface Vlan2
no ip address
ip nat inside
ip virtual-reassembly
ip default-gateway 192.168.1.1
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 101 interface FastEthernet4 overload
ip route 0.0.0.0 0.0.0.0 FastEthernet4
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 101 permit ip any any
dialer-list 1 protocol ip permit
no cdp run
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner login ^C
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.
YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE
PUBLICLY-KNOWN CREDENTIALS
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want
to use.
IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL
NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.
For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
^C
banner motd ^Cuthorized ^C
line con 0
login local
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
password cisco
logging synchronous
login local
transport input telnet ssh
scheduler max-task-time 5000
endHOME#ping 4.2.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 4.2.2.2, timeout is 2 seconds:
Success rate is 0 percent (0/5)
HOME#sh ip int br
Interface IP-Address OK? Method Status Protocol
FastEthernet0 unassigned YES unset down down
FastEthernet1 unassigned YES unset down down
FastEthernet2 unassigned YES unset down down
FastEthernet3 unassigned YES unset down down
FastEthernet4 192.168.1.120 YES DHCP up up
NVI0 10.10.10.1 YES unset up up
Vlan1 10.10.10.1 YES NVRAM down down
Vlan2 unassigned YES NVRAM down down
HOME#
fast ethernet is connected to my internet connection -
Can somebody tell me how can I browse the internet on N95 through my laptop which connected to the internet?
28-Jul-200708:04 AM
manwong wrote:
Can somebody tell me how can I browse the internet on N95 through my laptop which connected to the internet?
In standby mode hit the joystik ones to wifi end! thats it all the downloads of your N95 will be thrue the PC or LAPTOP. -
Cannot browse internet with N95 wifi
Dear All.....Pls help if you can.....I have wi-fi in my campus which is protected by a firewall and proxy server..we have to open [moderator note: address removed] first and then fill our username and password there...then we have to keep that window open and start browsing in other IE window..my problem is ..i can connect to the wi-fi hotspot...but when i open the above address.......no username or password fields are visible......so i can't fill any information.....although i have downloaded opera.....but problem with it is also the same.......but on my laptop which is also wi-fi enabled.....no such problem is there......any suggestions help will be highly appreciated.....
Moderator note: Have removed firewall product name and campus WLAN address.
Message Edited by concordia on 18-Aug-2008 10:37 AMThey should dump their convoluted system and make do with WPA-based authentication. After all, if someone has the ESSID and pre-shared key to access the network, why demand a password as well?
As for the proxy, it should control access to the outside by IP address, only allowing IP addresses from within the local network to punch out.
While the "belt and braces" approach to system security and integrity is commendable, it also has to bear in mind that the failing in the less-protected system (a student giving out the WLAN details) is the very same thing that will be the failing of the "overkill" system too. After all, if a student can give out WLAN details, they can also give out a username/password combo for the proxy. It makes no sense to make people jump through so many hoops for no real added security.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
Unable to browse Internet intermittently
I have a MacBook air 2011 and updated to latest lion last week. Since then I am having trouble browsing using safari and Firefox.
The pages often won't load at all but occasionally work fine.
I have logged on as guest user and safari works fine but I can't figure out what I need to change.
I have reset safari and cleared cache and repaired permissions etc.
Can anyone suggest a next step?
Thanks.Does your phone receive a valid ip address from your router?
Does it work fine when connected to other wifi networks? If so, then I'd say your router is the culprit. -
DEAR FRIENDS, WOULD U PLZ HELP ME !!! IF I CLICK ON BROWSER it is showing " ur device does not currently have any browser configuration service book entries"contact service provider to enable the browser on ur device" I told airtel customer care but remain the same .....plz help me
Battery pull first.
Did it ever work? What did airtel tell you? Did they make sure that you have a blackberry data plan? Ask them to resend your service books too.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!
Maybe you are looking for
-
Can anyone help me to re-install elements 6? I have it sat on the hard drive of an old machine which has a motherboard failure. I have the serial no, and I have a hard drive caddy. What do I do?
-
Apogee Duet clicking, skipping all of a sudden
Was using it fine and then now it is clicking and skipping and ruining the tracks I am recording vocally. What is the value of this $495 equipment anyway? I think my vocals sound better just through the mic in of my MacBook Pro and my keys can come i
-
OCR deskew creates black edges
I am using OCR in Acrobat Pro. When OCR deskews scanned pages a black background appears at the edges of the aligned pages. Is it possible to set this background color to white? I am using Acrobat 7. Has this feature been changed in newer versions?
-
I will be re-installing Windows XP on my system that has an MSI-7125-010 Neo4 platinum mb. Can you verify for me which drivers I will need or not need? It's been a few years since I've done this. I will not be using RAID. Thanks.
-
i have some problem for show pop up error message when data not found. case: i start from applet A then click drilldown to open applet B, (when i click drilldown it will automatically trigger to query data from backend). If data is found data will sh