Total size of installed packages - script
Hi,
I spend few hours today to make bash script, that allow me get total size of installed packages on my disk. It may be useful for many users.
Here it is:
#!/bin/bash
total=0
progress="-"
count=`pacman -Q | wc -l`
echo "Reading info of "$count" packages reported by 'pacman -Q'.
This may take few minutes..."
for pkg in `pacman -Q | sed 's/\ .*//'`
do
s=`pacman -Qi $pkg | sed -e '/Installed\ Size/!d; s/Installed\ Size\ :[\ ]*//; s/\ K//; s/,/./'`
if [ "$s" != "" ]; then
total=`echo $total" + "$s | bc`
printf "\033[1D"$progress
if [ "$progress" == "|" ]; then progress="-"; fi;
if [ "$progress" == "\\" ]; then progress="|"; fi;
if [ "$progress" == "_" ]; then progress="\\"; fi;
if [ "$progress" == "/" ]; then progress="_"; fi;
if [ "$progress" == "-" ]; then progress="/"; fi;
fi
done
echo
echo "Total size of installed packages is "$total" K"
! Script requere bc command (pacman -S bc) !
Thank you for corrections and comments.
I added a crude human-readability block near the end.
#!/bin/bash
total=0
progress="-"
count=`pacman -Q | wc -l`
echo "Reading info of "$count" packages reported by 'pacman -Q'.
This may take few minutes..."
for pkg in `pacman -Q | sed 's/\ .*//'`
do
s=`pacman -Qi $pkg | sed -e '/Installed\ Size/!d; s/Installed\ Size\ :\ *//; s/\ K//; s/,/./'`
if [ "$s" != "" ]; then
total=`echo $total" + "$s | bc`
printf "\033[1D"$progress
if [ "$progress" == "|" ]; then progress="-"; fi;
if [ "$progress" == "\\" ]; then progress="|"; fi;
if [ "$progress" == "_" ]; then progress="\\"; fi;
if [ "$progress" == "/" ]; then progress="_"; fi;
if [ "$progress" == "-" ]; then progress="/"; fi;
fi
done
suffix='K'
if [ `echo "$total > 1024" | bc` = 1 ]; then
total=`echo "scale=2; $total / 1024" | bc`
suffix='M'
if [ `echo "$total > 1024" | bc` = 1 ]; then
total=`echo "scale=2; $total / 1024" | bc`
suffix='G'
fi
fi
echo
echo "Total size of installed packages is $total $suffix"
And here's a version with a simpler and more informative progress meter:
#!/bin/bash
total=0
progress="1"
count=`pacman -Q | wc -l`
echo "Reading info of "$count" packages reported by 'pacman -Q'.
This may take few minutes..."
for pkg in `pacman -Q | sed 's/\ .*//'`
do
printf "\rprocessing file "$(( progress++ ))"..."
s=`pacman -Qi $pkg | sed -e '/Installed\ Size/!d; s/Installed\ Size\ :\ *//; s/\ K//; s/,/./'`
if [ "$s" != "" ]; then
total=`echo $total" + "$s | bc`
fi
done
suffix='K'
if [ `echo "$total > 1024" | bc` = 1 ]; then
total=`echo "scale=2; $total / 1024" | bc`
suffix='M'
if [ `echo "$total > 1024" | bc` = 1 ]; then
total=`echo "scale=2; $total / 1024" | bc`
suffix='G'
fi
fi
echo
echo "Total size of installed packages is $total $suffix"
It works, good job. I didn't know about bc!
Oh, and welcome to the Arch BBS!
Last edited by peets (2007-12-30 18:49:22)
Similar Messages
-
Installed package size and more
first question,
how do I know the final space required by a package and its dependencies on the hard disk after the install?
cos pacman gives an info about the size of the download but thats not necessary the final space required by the installation.
second, is there a way to make pacman install a package and its dependencies into a directory, for instance to check the structure of a certain package (sort of what slackware does)tuxman wrote:thanks everybody for the feedback.
my purpose is to analize the way a package would look into the filesystem once installed, where goes this and that file, in order to create modules for a live CD.
You need pacman -Sl support which is not implemented yet.
tuxman wrote:I have a doubt about the info given by pacman at download time yet.
Currently Pacman ouptuts only the total size of packages to be installed/upgraded.This will be changed in the future versions.
tuxman wrote:For instance, if I make pacman -Su it will download a bunch of packages, lets say 100MB but they will overwrite the existing ones, so the final space claimed on the hard disk will be less than 100MB
Or maybe I got it wrong eheheh
Hmm... this is more complicated, I doubt this will be implemented soon (if ever).
IMHO it will be enough (and easy to implement) only total size of all packages to be downloaded.
Calculating the resulting size of packages to be installed minus packages to be removed (replaced) is more complex. -
How can I get to install Microsoft Office 2011 in my Mac OS X 10.6.8 if when down to "writing package scripts" it fails ?
Contact Microsoft support and ask for help. You've paid for the kit, so installation-time support is part of the expectations. They'll probably suggest a Repair Permissions and a Verify Disk pass, both performed by booting the installation DVD and using Disk Utility from the Utilities menu item, and selecting those two repairs.
-
Sharing my script to show version difference of installed packages
Hi all.
Sometimes I don't want to just pacman -Syu. There are many packages that are big but introduce only minor bugfixes (usually libreoffice packages* are the culprits), so I don't want to have to install those.
This is something I cooked up a while ago to show version difference of currently installed packages with the latest packages in repository.
It's in python3, and uses python-termcolor.
It outputs something like this:
acl : 2.2.52-1 --> 2.2.52-2
archlinux-keyring : 20130926-1 --> 20131027-1
bison : 3.0-1 --> 3.0.1-1
cracklib : 2.9.0-1 --> 2.9.0-2
Here is the script:
#!/usr/bin/python3
from subprocess import check_output
from termcolor import colored
pacman_out=check_output(["pacman","-Sl"], universal_newlines=True).split("\n")
outlist = []
len_pkgname = 0
len_majver = 0
len_newver = 0
len_oldver = 0
for pkgs in pacman_out:
if not "[installed" in pkgs:
continue
if "[installed]" in pkgs:
continue
pkg_split = pkgs.split(" ")
newver = pkg_split[2]
oldver = pkg_split[4].rstrip("]")
for i in range(min(len(newver),len(oldver))):
if newver[i] != oldver[i]:
break
pkgname = pkg_split[1]
majver = newver[:i]
oldver = oldver[i:]
newver = newver[i:]
outlist.append((pkgname, majver, newver, oldver))
len_pkgname = max(len_pkgname, len(pkgname))
len_majver = max(len_majver, len(majver))
len_newver = max(len_newver, len(newver))
len_oldver = max(len_oldver, len(oldver))
for (pkgname, majver, newver, oldver) in outlist:
print("{}: {}{} --> {}{}".format(
pkgname.ljust(len_pkgname),
colored(majver.rjust(len_majver),"cyan"),
colored(oldver.ljust(len_oldver),"cyan",attrs=["bold"]),
colored(majver.rjust(len_majver),"magenta"),
colored(newver.ljust(len_newver),"magenta",attrs=["bold"])))
I hope pkgbrowser will include something like this in the future.
P/S: * these packages will break anyway in the event the dependencies has had some ABI changes.
EDIT: swapped new and old version columns. Thanks, karol!
Last edited by syockit (2013-12-04 17:55:42)syockit wrote:I hope pkgbrowser will include something like this in the future.
Why not suggest adding this feature?
Currently it shows only the version that is going to be installed https://bbs.archlinux.org/viewtopic.php … 3#p1316573
I've mated pacman's checkupdates with my old script https://bbs.archlinux.org/viewtopic.php … 80#p829780
$ diff -Naur /usr/bin/checkupdates ch
--- /usr/bin/checkupdates 2013-10-21 14:04:37.000000000 +0000
+++ ch 2013-12-04 18:46:52.792101792 +0000
@@ -37,7 +37,11 @@
mkdir -p "$CHECKUPDATES_DB"
ln -s "${DBPath}/local" "$CHECKUPDATES_DB" &> /dev/null
fakeroot pacman -Sy --dbpath "$CHECKUPDATES_DB" --logfile /dev/null &> /dev/null
-pacman -Qqu --dbpath "$CHECKUPDATES_DB" 2> /dev/null
+
+conf=${TMPDIR:-/tmp}/checkup-db-${USER}/pacman.conf
+grep -v "^Ignore" /etc/pacman.conf > $conf
+
+/usr/bin/paste -d " " <(/usr/bin/printf "%-20.20s %-12s => \n" $(/usr/bin/pacman -Qu)) <(/usr/bin/pacman -Sdp --config $conf --print-format "%v" $(/usr/bin/pacman -Qqu --dbpath "$CHECKUPDATES_DB" 2> /dev/null))
exit 0
$ ./ch
libpipeline 1.2.4-1 => 1.2.5-1
No colors though.
Last edited by karol (2013-12-04 18:55:03) -
Pacexp - python script to list REALLY explicitly installed packages
I usually just lurk the forums-- well, except for when I'm here asking for help with some PEBKAC issues... but never mind that.
This is a small python script I just wrote today while procrastinating. I'd love some feedback on the code, personally, but I'm hoping this could be useful to someone else. I always forget the stuff I have installed when I'm looking to clean my system up and `pacman -Qe` lists a lot of packages that Arch installs itself, so this is my way of dealing with it.
I'll probably be adding some other features to this script anyway, I'm gonna try to keep this post updated whenever I do so.
pacexp
A quick and dirty script to intersect the output of `pacman -Qe` with manually installed packages from /var/log/pacman.log
https://gist.github.com/spaceporn/d4ec6391a4684efb933c
If anyone has any suggestions to improve the code (even a better regexp counts), feel free to write them down here or on the gist page!karol wrote:
I use
expac "%n %N" $(comm -23 <(pacman -Qq|sort) <(pacman -Qqg base base-devel|sort)) | awk '$2 == ""' | less;
to list packages that aren't required by any other package and are not part of base or base-devel. All of them have been explicitly installed.
That's pretty cool! I'll probably save it as an alias if I ever have problems with my script -
Script to rebuild all installed packages from ABS
I realize pacbuilder is for that, but it doesn't seem to work properly for me. Skipping a lot of packages etc.
Anyway, I've made this very simple script to just rebuild every installed package from core/extra/community. Sorry for the localized echo output, but I think it's all very simple and straightforward to understand.
Edit:
I've improved it a bit, now it should work flawlessly and remember what stuff it has to finish no matter when you ^C out of it. Also it installs all compiled packages, if you want to avoid that, remove -i switch from makepkg.
#!/bin/sh
# user configuration
absdir="/home/mateusz/abs/autobuild"
pkgdir="/home/mateusz/abs/packages"
pkgfile="/home/mateusz/abs/autobuild.list"
# end of user configuration
topabs="/var/abs"
if [ ! -d $absdir ]; then
mkdir -pv $absdir
fi
if [ ! -d $pkgdir ]; then
mkdir -pv $pkgdir
fi
echo "(autobuild) Uaktualnianie bazy abs..."
sudo abs
if [ ! -f $pkgfile ]; then
echo "(autobuild) Tworzę listę pakietów do zbudowania..."
pacman -Qq > $pkgfile
else
echo "(autobuild) Znaleziono poprzedni build."
echo "(autobuild) Jeżeli nie chcesz go wykorzystać, skasuj $pkgfile"
fi
for pkgname in $(cat $pkgfile); do
echo "(autobuild) Szukanie pakietu $pkgname..."
find $topabs -type d -name "$pkgname" -exec cp -R {} $absdir \; 2> /dev/null
if [ -d "$absdir/$pkgname" ]; then
echo "(autobuild) Budowanie pakietu $pkgname..."
cd "$absdir/$pkgname"
makepkg -csir --noconfirm > /dev/null
if [ $? -eq 0 ]; then
echo "(autobuild) Pakiet zbudowany."
cat $pkgfile | grep -vx $pkgname > "$pkgfile.tmp"
mv $pkgfile.tmp $pkgfile
else
echo "(autobuild) Błąd budowania pakietu!"
fi
else
echo "(autobuild) Pakiet nieodnaleziony!"
cat $pkgfile | grep -vx $pkgname > "$pkgfile.tmp"
mv $pkgfile.tmp $pkgfile
fi
done
echo "(autobuild) Linkowanie pakietów do $pkgdir..."
find $absdir -name "*`uname -m`.pkg.tar.gz" -exec ln -v {} $pkgdir \; >/dev/null
echo "(autobuild) Zakończono."
exit 0
Last edited by xaff (2009-05-03 13:47:17)Here is the script translated into English (with a bit of help from Google Translate, as well as grammar cleanup).
#!/bin/sh
# user configuration
absdir="/home/aabbott/abs/autobuild"
pkgdir="/home/aabbott/abs/packages"
pkgfile="/home/aabbott/abs/autobuild.list"
# end of user configuration
topabs="/var/abs"
if [ ! -d $absdir ]; then
mkdir -pv $absdir
fi
if [ ! -d $pkgdir ]; then
mkdir -pv $pkgdir
fi
echo "(autobuild) Updating the ABS database..."
sudo abs
if [ ! -f $pkgfile ]; then
echo "(autobuild) Creating a list of packages to build..."
pacman -Qq > $pkgfile
else
echo "(autobuild) Found a previous build."
echo "(autobuild) If you don't want to use this build, delete ${pkgfile}."
fi
for pkgname in $(cat $pkgfile); do
echo "(autobuild) Searching for $pkgname..."
find $topabs -type d -name "$pkgname" -exec cp -R {} $absdir \; 2> /dev/null
if [ -d "$absdir/$pkgname" ]; then
echo "(autobuild) Building $pkgname..."
cd "$absdir/$pkgname"
makepkg -csir --noconfirm > /dev/null
if [ $? -eq 0 ]; then
echo "(autobuild) $pkgname built."
cat $pkgfile | grep -vx $pkgname > "$pkgfile.tmp"
mv $pkgfile.tmp $pkgfile
else
echo "(autobuild) There was an error when building ${pkgname}!"
fi
else
echo "(autobuild) $pkgname not found!"
cat $pkgfile | grep -vx $pkgname > "$pkgfile.tmp"
mv $pkgfile.tmp $pkgfile
fi
done
echo "(autobuild) Linking to $pkgdir..."
find $absdir -name "*`uname -m`.pkg.tar.gz" -exec ln -v {} $pkgdir \; >/dev/null
echo "(autobuild) Finished."
exit 0 -
[SOLVED] script to backup installed packages
Hi guys,
I know it should be easy, but I keep failing...
I can generate the list of installed packages with:
comm -23 <(pacman -Qeq|sort) <(pacman -Qmq|sort) > pkglist.txt
and I woudl like to integrate into my backup script.
I was testing it with a script with only two lines:
#! /bin/bash
comm -23 <(pacman -Qeq|sort) <(pacman -Qmq|sort) > pkglist.txt
but I get:
mkpklist: line 3: syntax error near unexpected token `('
mkpklist: line 3: `comm -23 <(pacman -Qeq|sort) <(pacman -Qmq|sort) > pkglist.txt '"
I tried different options with brackets in different places, but me being useless with these things I have no idea of what I am doing...
could anyone point me in the right direction?
Thanks a lot
M
Last edited by mcarni (2013-01-09 22:26:34)@mcarni, you know that when you use "sh <script>" you are specifying sh as the shell the script will be run with. In otherwords, you are overriding the shebang (#!/bin/bash) with /bin/sh. On our systems, we actually don't have an actual /bin/sh, as it is a symlink to bash. But when it is called via that symlink, it actually does its best to act like the old bourne shell.
-
Is there a way to see how much disk space every installed package is taking up? I remember seeing a script that listed that, but I can't for the life of me find it.
Last edited by Krause (2010-01-29 14:23:16)http://allanmcrae.com/2009/06/finding-large-packages/
-
FCP2 will not install past "running package scripts"
I'm trying to install FCP2 on OS 10.6.8 and the install window freezes after it reads "running package scripts". Help!
You will get better responses to your issue over at the Final Cut Studio Discussion forum.
Good luck.
Russ -
Check installed packages integrity? [Solved - script inside]
Hi,
is it possible to check installed packages for integrity - i.e. missing/changed files, etc. I looked at pacman man, but found nothing ...
Last edited by drakosha (2007-06-18 17:53:24)klixon wrote:I guess it uses a directory name for empty directories that are required, so the [ ! -d ] check is still valid...
Oh no, finally it's a little bug in pacman (src/pacman/package.c)
225 if(!stat(path, &buf) && S_ISDIR(buf.st_mode)) {
226 /* if we stat it and it is a dir, don't print */
227 } else {
228 fprintf(stdout, "%s %s\n", pkgname, path);
229 }
If a directory doesn't exist, or is only readable by root, it can't stat it and detect it's a directory, so it'll print it
As root, the only directory it prints is the one which doesn't exist, ie /tmp/ttf-ms-fonts/
because of the special status of the ttf-ms-fonts package.
And as user, it also prints /var/spool/cups/tmp/ , because it doesn't have the right to stat it I guess.
I'm glad i'm doing the opposite of what you're trying to do... That looks a bit more hairy.
lol indeed, that's why I gave up -
Installation stalled at running package scripts installing Cuebase 4
Innstallation of cuebase le4 stalled at running package scripts and will not finish, restart, shutdown or anything else
Contact the software vendor for their help.
-
[No need]Reducing number of post-install packages (fresh Arch + XFCE)
Hi,
I am inspired by posts by slithery in post-install package count; his discussion here and my willingness to follow-foot steps. Need suggestions/tips what packages can be removed based on details below.
1. Defining usage:
Normal PC having XFCE, thunderbird, firefox, yaourt and wine (for MS-Office with 32bit libs unfortunately needed for work) with 64-bit stock kernel. Other utilities include eog (image viewer), PDF viewer, cups, simple-scan, hplip + hplip plugin, dvd burner and some fonts packages.
I have attempted to remain native on XFCE while installing utilities/needs to avoid unnecessary dependencies unless some functionality needed (such as eog).
2. Current package count
[archpc ~]$ pacman -Qe | wc -l
143
[archpc ~]$ pacman -Q | wc -l
539
3. Installed packages details
3.1 pacman -Qe
alsa-utils 1.0.29-1
autoconf 2.69-2
automake 1.15-1
b43-fwcutter 019-1
bash 4.3.033-1
bash-completion 2.1-5
binutils 2.25-2
bison 3.0.4-1
btrfs-progs 3.19-1
bzip2 1.0.6-5
coreutils 8.23-1
cryptsetup 1.6.6-1
cups 2.0.2-1
device-mapper 2.02.116-1
dhcpcd 6.7.1-1
dialog 1:1.2_20150225-1
diffutils 3.3-2
dropbox 3.2.9-2
e2fsprogs 1.42.12-2
eog 3.14.3-1
epdfview 0.1.8-5
exo 0.10.4-1
fakeroot 1.20.2-1
file 5.22-1
filesystem 2015.02-1
findutils 4.4.2-6
firefox 36.0.3-1
flashplugin 11.2.202.451-1
flex 2.5.39-1
galculator 2.1.3-3
gamin 0.1.10-8
garcon 0.4.0-1
gawk 4.1.1-1
gcc 4.9.2-4
gcc-libs 4.9.2-4
gettext 0.19.4-1
gksu 2.0.2-5
glibc 2.21-2
gnome-colors-icon-theme 5.5.1-2
gnome-keyring 3.14.0-1
grep 2.21-2
groff 1.22.3-2
grub 1:2.02.beta2-5
grub2-theme-archxion 1.0-6
gtk-xfce-engine 2.10.1-1
gvfs 1.22.3-2
gvfs-afc 1.22.3-2
gvfs-smb 1.22.3-2
gzip 1.6-1
hplip 3.15.2-3
hplip-plugin 3.15.2-1
inetutils 1.9.2-2
iproute2 3.19.0-1
iputils 20121221-3
ipw2100-fw 1.3-7
ipw2200-fw 3.1-5
jfsutils 1.1.15-4
less 471-1
lib32-libxml2 2.9.2-1
libtool 2.4.6-1
licenses 20140629-1
linux 3.19.2-1
logrotate 3.8.9-1
lvm2 2.02.116-1
m4 1.4.17-1
make 4.1-1
man-db 2.7.1-1
man-pages 3.81-1
mdadm 3.3.2-1
mousepad 0.4.0-1
nano 2.2.6-3
netctl 1.10-1
network-manager-applet 1.0.0-1
networkmanager 1.0.0-2
ntfs-3g 2014.2.15-1
ntp 4.2.8.p1-1
nvidia-340xx 340.76-6
nvidia-340xx-libgl 340.76-2
nvidia-340xx-utils 340.76-2
os-prober 1.64-1
package-query 1.5-2
pacman 4.2.1-1
patch 2.7.5-1
pavucontrol 2.0-2
pciutils 3.3.0-1
pcmciautils 018-7
perl 5.20.2-1
pkg-config 0.28-2
polkit-gnome 0.105-2
procps-ng 3.3.10-1
psmisc 22.21-2
python2-xdg 0.25-2
reiserfsprogs 3.6.24-1
rp-pppoe 3.11-7
s-nail 14.7.11-1
samba 4.2.0-1
sddm 0.11.0-1
sed 4.2.2-3
shadow 4.2.1-2
simple-scan 3.14.2-1
sudo 1.8.12-1
sysfsutils 2.1.0-9
systemd-sysvcompat 218-2
tar 1.28-1
texinfo 5.2-3
thunar 1.6.6-1
thunar-volman 0.8.1-1
thunderbird 31.5.0-1
ttf-ms-fonts 2.0-10
ttf-urdufonts 1.2-3
tumbler 0.1.31-1
usbutils 008-1
util-linux 2.25.2-1
vi 1:050325-4
which 2.20-7
wine 1.7.39-1
wine-mono 4.5.6-1
wine_gecko 2.36-1
xdg-user-dirs 0.15-1
xdg-utils 1.1.0.git20150302-1
xf86-input-keyboard 1.8.0-3
xf86-input-mouse 1.9.1-1
xf86-input-synaptics 1.8.1-1
xfburn 0.5.2-2
xfce4-appfinder 4.12.0-1
xfce4-mixer 4.11.0-2
xfce4-panel 4.12.0-1
xfce4-power-manager 1.4.3-1
xfce4-session 4.12.1-1
xfce4-settings 4.12.0-3
xfce4-terminal 0.6.3-2
xfce4-whiskermenu-plugin 1.5.0-2
xfconf 4.12.0-1
xfdesktop 4.12.0-1
xfsprogs 3.2.2-1
xfwm4 4.12.2-1
xfwm4-themes 4.10.0-2
xorg-server 1.17.1-4
xorg-server-utils 7.6-4
xorg-xinit 1.3.4-2
xterm 316-1
yaourt 1.5-1
zd1211-firmware 1.5-1
3.2 pacman -Q
acl 2.2.52-2
adwaita-icon-theme 3.14.1-1
alsa-lib 1.0.29-1
alsa-utils 1.0.29-1
archlinux-keyring 20150212-1
at-spi2-atk 2.14.1-1
at-spi2-core 2.14.1-1
atk 2.14.0-1
atkmm 2.22.7-1
attr 2.4.47-1
autoconf 2.69-2
automake 1.15-1
avahi 0.6.31-14
b43-fwcutter 019-1
bash 4.3.033-1
bash-completion 2.1-5
bc 1.06.95-1
binutils 2.25-2
bison 3.0.4-1
btrfs-progs 3.19-1
bzip2 1.0.6-5
ca-certificates 20140923-9
ca-certificates-cacert 20140824-2
ca-certificates-mozilla 3.17.4-1
ca-certificates-utils 20140923-9
cairo 1.14.2-1
cairomm 1.10.0-3
cantarell-fonts 0.0.16-2
cdparanoia 10.2-5
cifs-utils 6.4-1
colord 1.2.9-1
compositeproto 0.4.2-3
coreutils 8.23-1
cracklib 2.9.1-1
cryptsetup 1.6.6-1
cups 2.0.2-1
cups-filters 1.0.67-1
curl 7.41.0-1
damageproto 1.2.1-3
db 5.3.28-2
dbus 1.8.16-2
dbus-glib 0.102-2
dconf 0.22.0-1
desktop-file-utils 0.22-1
device-mapper 2.02.116-1
dhclient 4.3.1-1
dhcpcd 6.7.1-1
dialog 1:1.2_20150225-1
diffutils 3.3-2
dropbox 3.2.9-2
e2fsprogs 1.42.12-2
elfutils 0.161-3
eog 3.14.3-1
epdfview 0.1.8-5
exempi 2.2.2-1
exo 0.10.4-1
expat 2.1.0-4
fakeroot 1.20.2-1
file 5.22-1
filesystem 2015.02-1
findutils 4.4.2-6
firefox 36.0.3-1
fixesproto 5.0-3
flac 1.3.1-1
flashplugin 11.2.202.451-1
flex 2.5.39-1
fontconfig 2.11.1-1
fontsproto 2.1.3-1
foomatic-db-engine 3:20150308-1
freetype2 2.5.5-1
fuse 2.9.3-2
galculator 2.1.3-3
gamin 0.1.10-8
garcon 0.4.0-1
gawk 4.1.1-1
gc 7.4.2-2
gcc 4.9.2-4
gcc-libs 4.9.2-4
gconf 3.2.6-3
gcr 3.14.0-1
gd 2.1.1-1
gdbm 1.11-1
gdk-pixbuf2 2.31.3-1
gettext 0.19.4-1
ghostscript 9.15-2
gksu 2.0.2-5
glib-networking 2.42.1-1
glib2 2.42.2-1
glibc 2.21-2
glibmm 2.42.0-1
glu 9.0.0-3
gmp 6.0.0-2
gnome-colors-icon-theme 5.5.1-2
gnome-desktop 1:3.14.2-1
gnome-icon-theme 3.12.0-2
gnome-icon-theme-symbolic 3.12.0-2
gnome-keyring 3.14.0-1
gnome-themes-standard 3.14.2.3-1
gnupg 2.1.2-1
gnutls 3.3.13-1
gobject-introspection 1.42.0-1
gpgme 1.5.3-1
gpm 1.20.7-4
graphite 1:1.2.4-1
grep 2.21-2
groff 1.22.3-2
grub 1:2.02.beta2-5
grub2-theme-archxion 1.0-6
gsettings-desktop-schemas 3.14.1-1
gstreamer0.10 0.10.36-4
gstreamer0.10-base 0.10.36-3
gstreamer0.10-base-plugins 0.10.36-3
gtk-update-icon-cache 2.24.27-1
gtk-xfce-engine 2.10.1-1
gtk2 2.24.27-1
gtk3 3.14.9-1
gtkmm3 3.14.0-1
gtksourceview2 2.10.5-3
guile 2.0.11-2
gvfs 1.22.3-2
gvfs-afc 1.22.3-2
gvfs-smb 1.22.3-2
gzip 1.6-1
harfbuzz 0.9.38-1
hicolor-icon-theme 0.13-1
hplip 3.15.2-3
hplip-plugin 3.15.2-1
hunspell 1.3.3-1
hwids 20150129-1
iana-etc 2.30-4
icu 54.1-1
inetutils 1.9.2-2
iniparser 3.1-4
inputproto 2.3.1-1
iproute2 3.19.0-1
iptables 1.4.21-1
iputils 20121221-3
ipw2100-fw 1.3-7
ipw2200-fw 3.1-5
iso-codes 3.57-1
jansson 2.7-1
jasper 1.900.1-13
jfsutils 1.1.15-4
js17 17.0.0-1
json-c 0.12-2
json-glib 1.0.2-1
kbd 2.0.2-1
kbproto 1.0.6-2
keyutils 1.5.9-1
kmod 20-1
krb5 1.13.1-1
lcms2 2.6-1
ldb 1.1.20-1
less 471-1
lib32-acl 2.2.52-2
lib32-attr 2.4.47-1
lib32-bzip2 1.0.6-2
lib32-curl 7.41.0-1
lib32-e2fsprogs 1.42.12-1
lib32-expat 2.1.0-2
lib32-fontconfig 2.11.1-1
lib32-freetype2 2.5.5-1
lib32-gcc-libs 4.9.2-4
lib32-gettext 0.19.4-1
lib32-glib2 2.42.2-1
lib32-glibc 2.21-2
lib32-glu 9.0.0-2
lib32-harfbuzz 0.9.38-1
lib32-icu 54.1-1
lib32-keyutils 1.5.9-1
lib32-krb5 1.13.1-1
lib32-libcap 2.24-1
lib32-libdbus 1.8.16-1
lib32-libffi 3.2.1-1
lib32-libgcrypt 1.6.3-1
lib32-libgpg-error 1.18-1
lib32-libice 1.0.9-1
lib32-libldap 2.4.40-1
lib32-libnl 3.2.25-1
lib32-libpcap 1.6.2-1
lib32-libpng 1.6.16-1
lib32-libsm 1.2.2-1
lib32-libssh2 1.4.3-2
lib32-libusb 1.0.19-1
lib32-libx11 1.6.3-1
lib32-libxau 1.0.8-1
lib32-libxcb 1.11-1
lib32-libxcursor 1.1.14-1
lib32-libxdamage 1.1.4-2
lib32-libxdmcp 1.1.1-2
lib32-libxext 1.3.3-1
lib32-libxfixes 5.0.1-1
lib32-libxi 1.7.4-1
lib32-libxml2 2.9.2-1
lib32-libxrandr 1.4.2-1
lib32-libxrender 0.9.8-1
lib32-ncurses 5.9-3
lib32-nvidia-340xx-libgl 340.76-1
lib32-nvidia-340xx-utils 340.76-1
lib32-openssl 1.0.2.a-1
lib32-pcre 8.36-1
lib32-readline 6.3.006-1
lib32-systemd 218-1
lib32-util-linux 2.25.2-1
lib32-xz 5.2.1-1
lib32-zlib 1.2.8-1
libaio 0.3.110-1
libarchive 3.1.2-8
libassuan 2.1.3-1
libasyncns 0.8-5
libatasmart 0.19-3
libatomic_ops 7.4.2-1
libbluray 0.7.0-1
libbsd 0.7.0-1
libburn 1.3.8-1
libcanberra 0.30-5
libcanberra-pulse 0.30-5
libcap 2.24-2
libcap-ng 0.7.4-1
libcddb 1.3.2-4
libcdio 0.93-1
libcdio-paranoia 10.2+0.93+1-1
libcroco 0.6.8-2
libcups 2.0.2-1
libdaemon 0.14-3
libdatrie 0.2.8-1
libdbus 1.8.16-2
libdrm 2.4.59-1
libedit 20141030_3.1-1
libepoxy 1.2-2
libevdev 1.4-1
libevent 2.0.22-1
libexif 0.6.21-2
libffi 3.2.1-1
libfontenc 1.1.2-1
libgcrypt 1.6.3-2
libgksu 2.0.12-6
libgnome-keyring 3.12.0-2
libgpg-error 1.18-1
libgphoto2 2.5.7-1
libgtop 2.30.0-1
libgusb 0.2.4-1
libice 1.0.9-1
libidn 1.30-1
libieee1284 0.2.11-5
libimobiledevice 1.2.0-1
libisofs 1.3.8-1
libjpeg-turbo 1.4.0-1
libkeybinder2 0.3.0-2
libksba 1.3.2-1
libldap 2.4.40-2
libmm-glib 1.4.4-1
libmpc 1.0.3-1
libndp 1.4-1
libnewt 0.52.17-2
libnl 3.2.25-1
libnm-glib 1.0.0-2
libnm-gtk 1.0.0-1
libnotify 0.7.6-1
libogg 1.3.2-1
libomxil-bellagio 0.9.3-1
libpaper 1.1.24-7
libpcap 1.6.2-1
libpciaccess 0.13.3-1
libpeas 1.12.1-1
libpipeline 1.4.0-1
libplist 1.12-1
libpng 1.6.16-1
libproxy 0.4.11-5
libpulse 6.0-1
librsvg 1:2.40.8-1
libsamplerate 0.1.8-3
libsasl 2.1.26-7
libseccomp 2.1.1-1
libsecret 0.18-1
libsigc++ 2.4.1-1
libsm 1.2.2-2
libsndfile 1.0.25-3
libsoup 2.48.1-1
libssh2 1.4.3-2
libsystemd 218-2
libtasn1 4.3-1
libteam 1.14-1
libthai 0.1.21-1
libtheora 1.1.1-3
libtiff 4.0.3-5
libtirpc 0.2.5-1
libtool 2.4.6-1
libtxc_dxtn 1.0.1-6
libunique 1.1.6-6
libunistring 0.9.5-1
libunwind 1.1-2
libusb 1.0.19-1
libusbmuxd 1.0.10-1
libutempter 1.1.6-2
libutil-linux 2.25.2-1
libvisual 0.4.0-5
libvorbis 1.3.4-1
libvpx 1.3.0-1
libwbclient 4.2.0-1
libwnck 2.31.0-1
libx11 1.6.3-1
libxau 1.0.8-2
libxaw 1.0.12-1
libxcb 1.11-1
libxcomposite 0.4.4-2
libxcursor 1.1.14-2
libxdamage 1.1.4-2
libxdmcp 1.1.1-2
libxext 1.3.3-1
libxfce4ui 4.12.1-1
libxfce4util 4.12.1-1
libxfixes 5.0.1-1
libxfont 1.5.1-1
libxft 2.3.2-1
libxi 1.7.4-1
libxinerama 1.1.3-2
libxkbcommon 0.5.0-1
libxkbcommon-x11 0.5.0-1
libxkbfile 1.0.8-2
libxklavier 5.4-1
libxml2 2.9.2-2
libxmu 1.1.2-1
libxpm 3.5.11-1
libxrandr 1.4.2-2
libxrender 0.9.8-1
libxres 1.0.7-1
libxshmfence 1.2-1
libxslt 1.1.28-3
libxt 1.1.4-1
libxtst 1.2.2-1
libxv 1.0.10-1
libxxf86vm 1.1.4-1
licenses 20140629-1
linux 3.19.2-1
linux-api-headers 3.18.5-1
linux-firmware 20150206.17657c3-1
llvm-libs 3.6.0-3
logrotate 3.8.9-1
lvm2 2.02.116-1
lz4 127-1
lzo 2.09-1
m4 1.4.17-1
make 4.1-1
man-db 2.7.1-1
man-pages 3.81-1
mcpp 2.7.2-5
mdadm 3.3.2-1
mesa 10.5.1-2
mime-types 9-1
mkinitcpio 18-2
mkinitcpio-busybox 1.21.1-2
mobile-broadband-provider-info 20120614-2
mousepad 0.4.0-1
mozilla-common 1.4-4
mpfr 3.1.2.p11-1
mtdev 1.1.5-1
nano 2.2.6-3
ncurses 5.9-7
net-snmp 5.7.3-1
net-tools 1.60.20130531git-1
netctl 1.10-1
nettle 2.7.1-1
network-manager-applet 1.0.0-1
networkmanager 1.0.0-2
npth 1.1-1
nspr 4.10.8-1
nss 3.17.4-1
ntfs-3g 2014.2.15-1
ntp 4.2.8.p1-1
nvidia-340xx 340.76-6
nvidia-340xx-libgl 340.76-2
nvidia-340xx-utils 340.76-2
openjpeg 1.5.2-1
openresolv 3.6.1-1
openssl 1.0.2.a-1
orc 0.4.23-1
os-prober 1.64-1
p11-kit 0.22.1-3
package-query 1.5-2
pacman 4.2.1-1
pacman-mirrorlist 20150315-1
pam 1.1.8-5
pambase 20130928-1
pango 1.36.8-1
pangomm 2.34.0-1
patch 2.7.5-1
pavucontrol 2.0-2
pciutils 3.3.0-1
pcmciautils 018-7
pcre 8.36-2
perl 5.20.2-1
perl-clone 0.37-2
perl-dbi 1.633-1
perl-xml-libxml 2.0117-1
perl-xml-namespacesupport 1.11-3
perl-xml-sax 0.99-4
perl-xml-sax-base 1.08-3
pinentry 0.9.0-1
pixman 0.32.6-1
pkg-config 0.28-2
polkit 0.112-2
polkit-gnome 0.105-2
poppler 0.31.0-1
poppler-glib 0.31.0-1
popt 1.16-7
ppp 2.4.7-1
procps-ng 3.3.10-1
psmisc 22.21-2
pth 2.0.7-5
python 3.4.3-1
python2 2.7.9-1
python2-xdg 0.25-2
qpdf 5.1.2-1
qt5-base 5.4.1-2
qt5-declarative 5.4.1-2
qt5-xmlpatterns 5.4.1-2
qtchooser 48-1
randrproto 1.4.1-1
readline 6.3.006-1
recordproto 1.14.2-2
reiserfsprogs 3.6.24-1
renderproto 0.11.1-3
rest 0.7.92-1
rp-pppoe 3.11-7
s-nail 14.7.11-1
samba 4.2.0-1
sane 1.0.24-4
sddm 0.11.0-1
sed 4.2.2-3
shadow 4.2.1-2
shared-mime-info 1.4-1
simple-scan 3.14.2-1
slang 2.3.0-1
smbclient 4.2.0-1
sound-theme-freedesktop 0.8-2
sqlite 3.8.8.3-1
startup-notification 0.12-4
sudo 1.8.12-1
sysfsutils 2.1.0-9
systemd 218-2
systemd-sysvcompat 218-2
talloc 2.1.1-1
tar 1.28-1
tdb 1.3.4-1
tevent 0.9.24-1
texinfo 5.2-3
thin-provisioning-tools 0.4.1-1
thunar 1.6.6-1
thunar-volman 0.8.1-1
thunderbird 31.5.0-1
ttf-dejavu 2.34-2
ttf-ms-fonts 2.0-10
ttf-urdufonts 1.2-3
tumbler 0.1.31-1
tzdata 2015a-1
udisks2 2.1.5-1
upower 0.99.2-2
usbmuxd 1.1.0-2
usbutils 008-1
util-linux 2.25.2-1
v4l-utils 1.6.2-1
vi 1:050325-4
videoproto 2.3.2-1
vte 0.28.2-5
vte-common 0.38.3-1
wayland 1.7.0-1
wget 1.16.3-1
which 2.20-7
wine 1.7.39-1
wine-mono 4.5.6-1
wine_gecko 2.36-1
wpa_supplicant 2.3-1
xbitmaps 1.1.1-3
xcb-proto 1.11-1
xcb-util 0.4.0-1
xcb-util-image 0.4.0-1
xcb-util-keysyms 0.4.0-1
xcb-util-wm 0.4.1-1
xdg-user-dirs 0.15-1
xdg-utils 1.1.0.git20150302-1
xextproto 7.3.0-1
xf86-input-evdev 2.9.1-1
xf86-input-keyboard 1.8.0-3
xf86-input-mouse 1.9.1-1
xf86-input-synaptics 1.8.1-1
xf86vidmodeproto 2.3.1-3
xfburn 0.5.2-2
xfce4-appfinder 4.12.0-1
xfce4-mixer 4.11.0-2
xfce4-panel 4.12.0-1
xfce4-power-manager 1.4.3-1
xfce4-session 4.12.1-1
xfce4-settings 4.12.0-3
xfce4-terminal 0.6.3-2
xfce4-whiskermenu-plugin 1.5.0-2
xfconf 4.12.0-1
xfdesktop 4.12.0-1
xfsprogs 3.2.2-1
xfwm4 4.12.2-1
xfwm4-themes 4.10.0-2
xineramaproto 1.2.1-3
xkeyboard-config 2.14-1
xorg-bdftopcf 1.0.5-1
xorg-font-util 1.3.1-1
xorg-font-utils 7.6-4
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-4
xorg-fonts-misc 1.0.3-3
xorg-iceauth 1.0.7-1
xorg-luit 1.1.1-2
xorg-mkfontdir 1.0.7-2
xorg-mkfontscale 1.1.2-1
xorg-server 1.17.1-4
xorg-server-common 1.17.1-4
xorg-server-utils 7.6-4
xorg-sessreg 1.1.0-1
xorg-setxkbmap 1.3.0-2
xorg-xauth 1.0.9-1
xorg-xbacklight 1.2.1-1
xorg-xcmsdb 1.0.4-2
xorg-xgamma 1.0.5-2
xorg-xhost 1.0.6-1
xorg-xinit 1.3.4-2
xorg-xinput 1.6.1-1
xorg-xkbcomp 1.3.0-1
xorg-xmodmap 1.0.8-1
xorg-xrandr 1.4.3-1
xorg-xrdb 1.1.0-1
xorg-xrefresh 1.0.5-1
xorg-xset 1.2.3-1
xorg-xsetroot 1.1.1-2
xproto 7.0.27-1
xterm 316-1
xz 5.2.1-1
yajl 2.1.0-1
yaourt 1.5-1
zd1211-firmware 1.5-1
zlib 1.2.8-3
4. Output from Slithery's script
clear; echo -n "Number of installed packages: $(pacman -Qq | wc -l)"; echo; echo; echo "# Packages in base group that aren't installed"; comm -23 <((for i in $(pacman -Sqg base); do pactree -us $i; done)|sort -u|cut -d ' ' -f 1) <(pacman -Qq); echo; echo "# Packages installed that aren't in base group"; comm -13 <((for i in $(pacman -Sqg base); do pactree -us $i; done)|sort -u|cut -d ' ' -f 1) <(pacman -Qq); echo; echo "# pstree"; pstree -U; echo; echo "# enabled services"; systemctl list-unit-files | grep enabled | grep service; echo; echo "# ssd df"; df -h -t ext4; echo; echo "# free"; free -m; echo
Note: Some information produced above will be repeaeted
[H[2JNumber of installed packages: 539
# Packages in base group that aren't installed
# Packages installed that aren't in base group
adwaita-icon-theme
alsa-lib
alsa-utils
at-spi2-atk
at-spi2-core
atk
atkmm
autoconf
automake
avahi
b43-fwcutter
bash-completion
bc
binutils
bison
btrfs-progs
cairo
cairomm
cantarell-fonts
cdparanoia
cifs-utils
colord
compositeproto
cups
cups-filters
damageproto
dbus-glib
dconf
desktop-file-utils
dhclient
dialog
dropbox
elfutils
eog
epdfview
exempi
exo
fakeroot
firefox
fixesproto
flac
flashplugin
flex
fontconfig
fontsproto
foomatic-db-engine
freetype2
fuse
galculator
gamin
garcon
gc
gcc
gconf
gcr
gd
gdk-pixbuf2
ghostscript
gksu
glib-networking
glibmm
glu
gnome-colors-icon-theme
gnome-desktop
gnome-icon-theme
gnome-icon-theme-symbolic
gnome-keyring
gnome-themes-standard
gobject-introspection
gpm
graphite
grub
grub2-theme-archxion
gsettings-desktop-schemas
gstreamer0.10
gstreamer0.10-base
gstreamer0.10-base-plugins
gtk-update-icon-cache
gtk-xfce-engine
gtk2
gtk3
gtkmm3
gtksourceview2
guile
gvfs
gvfs-afc
gvfs-smb
harfbuzz
hicolor-icon-theme
hplip
hplip-plugin
hunspell
icu
iniparser
inputproto
ipw2100-fw
ipw2200-fw
iso-codes
jansson
jasper
js17
json-c
json-glib
kbproto
lcms2
ldb
lib32-acl
lib32-attr
lib32-bzip2
lib32-curl
lib32-e2fsprogs
lib32-expat
lib32-fontconfig
lib32-freetype2
lib32-gcc-libs
lib32-gettext
lib32-glib2
lib32-glibc
lib32-glu
lib32-harfbuzz
lib32-icu
lib32-keyutils
lib32-krb5
lib32-libcap
lib32-libdbus
lib32-libffi
lib32-libgcrypt
lib32-libgpg-error
lib32-libice
lib32-libldap
lib32-libnl
lib32-libpcap
lib32-libpng
lib32-libsm
lib32-libssh2
lib32-libusb
lib32-libx11
lib32-libxau
lib32-libxcb
lib32-libxcursor
lib32-libxdamage
lib32-libxdmcp
lib32-libxext
lib32-libxfixes
lib32-libxi
lib32-libxml2
lib32-libxrandr
lib32-libxrender
lib32-ncurses
lib32-nvidia-340xx-libgl
lib32-nvidia-340xx-utils
lib32-openssl
lib32-pcre
lib32-readline
lib32-systemd
lib32-util-linux
lib32-xz
lib32-zlib
libasyncns
libatasmart
libatomic_ops
libbluray
libbsd
libburn
libcanberra
libcanberra-pulse
libcap-ng
libcddb
libcdio
libcdio-paranoia
libcroco
libcups
libdaemon
libdatrie
libdrm
libedit
libepoxy
libevdev
libevent
libexif
libfontenc
libgksu
libgnome-keyring
libgphoto2
libgtop
libgusb
libice
libieee1284
libimobiledevice
libisofs
libjpeg-turbo
libkeybinder2
libmm-glib
libmpc
libndp
libnewt
libnl
libnm-glib
libnm-gtk
libnotify
libogg
libomxil-bellagio
libpaper
libpcap
libpciaccess
libpeas
libplist
libpng
libproxy
libpulse
librsvg
libsamplerate
libsecret
libsigc++
libsm
libsndfile
libsoup
libteam
libthai
libtheora
libtiff
libtool
libtxc_dxtn
libunique
libunwind
libusbmuxd
libutempter
libvisual
libvorbis
libvpx
libwbclient
libwnck
libx11
libxau
libxaw
libxcb
libxcomposite
libxcursor
libxdamage
libxdmcp
libxext
libxfce4ui
libxfce4util
libxfixes
libxfont
libxft
libxi
libxinerama
libxkbcommon
libxkbcommon-x11
libxkbfile
libxklavier
libxml2
libxmu
libxpm
libxrandr
libxrender
libxres
libxshmfence
libxslt
libxt
libxtst
libxv
libxxf86vm
llvm-libs
m4
make
mcpp
mesa
mime-types
mobile-broadband-provider-info
mousepad
mozilla-common
mtdev
net-snmp
net-tools
network-manager-applet
networkmanager
nspr
nss
ntfs-3g
ntp
nvidia-340xx
nvidia-340xx-libgl
nvidia-340xx-utils
openjpeg
orc
os-prober
package-query
pango
pangomm
patch
pavucontrol
perl-clone
perl-dbi
perl-xml-libxml
perl-xml-namespacesupport
perl-xml-sax
perl-xml-sax-base
pixman
pkg-config
polkit
polkit-gnome
poppler
poppler-glib
ppp
python
python2
python2-xdg
qpdf
qt5-base
qt5-declarative
qt5-xmlpatterns
qtchooser
randrproto
recordproto
renderproto
rest
rp-pppoe
samba
sane
sddm
shared-mime-info
simple-scan
slang
smbclient
sound-theme-freedesktop
sqlite
startup-notification
sudo
talloc
tdb
tevent
thunar
thunar-volman
thunderbird
ttf-dejavu
ttf-ms-fonts
ttf-urdufonts
tumbler
udisks2
upower
usbmuxd
v4l-utils
videoproto
vte
vte-common
wayland
wget
wine
wine-mono
wine_gecko
wpa_supplicant
xbitmaps
xcb-proto
xcb-util
xcb-util-image
xcb-util-keysyms
xcb-util-wm
xdg-user-dirs
xdg-utils
xextproto
xf86-input-evdev
xf86-input-keyboard
xf86-input-mouse
xf86-input-synaptics
xf86vidmodeproto
xfburn
xfce4-appfinder
xfce4-mixer
xfce4-panel
xfce4-power-manager
xfce4-session
xfce4-settings
xfce4-terminal
xfce4-whiskermenu-plugin
xfconf
xfdesktop
xfwm4
xfwm4-themes
xineramaproto
xkeyboard-config
xorg-bdftopcf
xorg-font-util
xorg-font-utils
xorg-fonts-alias
xorg-fonts-encodings
xorg-fonts-misc
xorg-iceauth
xorg-luit
xorg-mkfontdir
xorg-mkfontscale
xorg-server
xorg-server-common
xorg-server-utils
xorg-sessreg
xorg-setxkbmap
xorg-xauth
xorg-xbacklight
xorg-xcmsdb
xorg-xgamma
xorg-xhost
xorg-xinit
xorg-xinput
xorg-xkbcomp
xorg-xmodmap
xorg-xrandr
xorg-xrdb
xorg-xrefresh
xorg-xset
xorg-xsetroot
xproto
xterm
yajl
yaourt
zd1211-firmware
# pstree
systemd─┬─NetworkManager─┬─dhclient
│ ├─{NetworkManager}
│ ├─{gdbus}
│ └─{gmain}
├─Thunar─┬─{gdbus}
│ └─{gmain}
├─at-spi-bus-laun─┬─dbus-daemon
│ ├─{dconf worker}
│ ├─{gdbus}
│ └─{gmain}
├─at-spi2-registr───{gdbus}
├─avahi-daemon───avahi-daemon
├─colord─┬─{gdbus}
│ └─{gmain}
├─cupsd
├─3*[dbus-daemon]
├─2*[dbus-launch]
├─dconf-service─┬─{gdbus}
│ └─{gmain}
├─firefox─┬─6*[{Analysis Helper}]
│ ├─{Cache I/O}
│ ├─{Cache2 I/O}
│ ├─{Cert Verify}
│ ├─{Compositor}
│ ├─{DNS Resolver #7}
│ ├─{DNS Resolver #9}
│ ├─{DNS Res~ver #10}
│ ├─3*[{DOM Worker}]
│ ├─{GMPThread}
│ ├─{Gecko_IOThread}
│ ├─{HTML5 Parser}
│ ├─{Hang Monitor}
│ ├─{IPDL Background}
│ ├─{Image Scaler}
│ ├─{ImageBridgeChil}
│ ├─{JS Watchdog}
│ ├─{MediaManager}
│ ├─{Net Predictor}
│ ├─{Proxy R~olution}
│ ├─{Socket Thread}
│ ├─{Timer}
│ ├─{URL Classifier}
│ ├─{dconf worker}
│ ├─3*[{firefox}]
│ ├─{gdbus}
│ ├─{gmain}
│ ├─{localStorage DB}
│ ├─{mozStorage #10}
│ ├─{mozStorage #1}
│ ├─{mozStorage #2}
│ ├─{mozStorage #3}
│ ├─{mozStorage #4}
│ ├─{mozStorage #5}
│ ├─{mozStorage #6}
│ ├─{mozStorage #7}
│ ├─{mozStorage #8}
│ └─{mozStorage #9}
├─gnome-keyring-d─┬─{dconf worker}
│ ├─{gdbus}
│ ├─{gmain}
│ └─{timer}
├─gpg-agent
├─gvfs-afc-volume─┬─{gdbus}
│ └─{gvfs-afc-volume}
├─gvfs-udisks2-vo─┬─{gdbus}
│ └─{gmain}
├─gvfsd───{gdbus}
├─gvfsd-fuse─┬─{gdbus}
│ ├─{gvfs-fuse-sub}
│ └─2*[{gvfsd-fuse}]
├─gvfsd-metadata───{gdbus}
├─gvfsd-trash─┬─{gdbus}
│ └─{gmain}
├─polkitd─┬─{JS GC Helper}
│ ├─{JS Sour~ Thread}
│ ├─{gdbus}
│ ├─{gmain}
│ └─{runaway-killer-}
├─sddm─┬─Xorg
│ ├─sddm-helper─┬─sh───xfce4-session─┬─dropbox─┬─{QXcbEventReader}
│ │ │ │ └─24*[{dropbox}]
│ │ │ ├─nm-applet─┬─{dconf worker}
│ │ │ │ ├─{gdbus}
│ │ │ │ └─{gmain}
│ │ │ ├─polkit-gnome-au───{gdbus}
│ │ │ ├─{gdbus}
│ │ │ └─{gmain}
│ │ └─{QProcessManager}
│ └─{QProcessManager}
├─2*[systemd───(sd-pam)]
├─systemd-journal
├─systemd-logind
├─systemd-udevd───systemd-udevd
├─thunderbird─┬─2*[{Analysis Helper}]
│ ├─{Cache I/O}
│ ├─{Cache2 I/O}
│ ├─{Cert Verify}
│ ├─{DOM Worker}
│ ├─{Gecko_IOThread}
│ ├─{HTML5 Parser}
│ ├─{Hang Monitor}
│ ├─{JS GC Helper}
│ ├─{JS Watchdog}
│ ├─{Network Seer}
│ ├─{Proxy R~olution}
│ ├─{Socket Thread}
│ ├─{Timer}
│ ├─{URL Classifier}
│ ├─{dconf worker}
│ ├─{gdbus}
│ ├─{gmain}
│ ├─{localStorage DB}
│ ├─{mozStorage #1}
│ ├─{mozStorage #2}
│ ├─{mozStorage #3}
│ ├─{mozStorage #4}
│ ├─{mozStorage #5}
│ ├─{mozStorage #6}
│ └─8*[{thunderbird}]
├─tumblerd─┬─{gdbus}
│ ├─{gmain}
│ └─2*[{pool}]
├─udisksd─┬─{cleanup}
│ ├─{gdbus}
│ ├─{gmain}
│ └─{probing-thread}
├─upowerd─┬─{gdbus}
│ └─{gmain}
├─wpa_supplicant
├─xfce4-panel─┬─panel-1-whisker─┬─{gdbus}
│ │ └─{gmain}
│ ├─panel-12-mixer─┬─{gdbus}
│ │ ├─{task0}
│ │ ├─{task1}
│ │ └─{task2}
│ ├─panel-2-actions
│ ├─panel-6-systray
│ ├─{gdbus}
│ └─{gmain}
├─xfce4-power-man───{gdbus}
├─xfce4-terminal─┬─bash───bash───pstree
│ ├─gnome-pty-helpe
│ ├─{gdbus}
│ └─{gmain}
├─xfconfd
├─xfdesktop─┬─{gdbus}
│ └─{gmain}
├─xfsettingsd─┬─{gdbus}
│ └─{gmain}
└─xfwm4
# enabled services
dbus-org.freedesktop.NetworkManager.service enabled
dbus-org.freedesktop.nm-dispatcher.service enabled
display-manager.service enabled
[email protected] enabled
NetworkManager-dispatcher.service enabled
NetworkManager.service enabled
org.cups.cupsd.service enabled
sddm.service enabled
# ssd df
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 8.8G 4.8G 3.5G 58% /
/dev/sda4 63G 12G 48G 20% /home
# free
total used free shared buff/cache available
Mem: 2948 985 805 8 1157 1743
Swap: 2047 0 2047
5. Packages removable IMO
More could be possible based on suggestions, but IMHO and is it safe?:
|Package Name | Reason |
|---------------------------|--------------------------------------------------------------
|man-db 2.7.1-1 | For me: Wiki, Google and Forums are > what I need. |
|man-pages 3.81-1 | For me: Wiki, Google and Forums are > what I need. |
|xterm | xfce4-terminal is installed so is it needed? |
|reiserfsprogs | No need for reiser FS support (if it is what package does). |
|jfsutils | No need for JFS support. |
|xfsprogs | No need for XFS support. |
|lvm2 | I think no need for logical VM (but not sure). |
|mdadm | I think no need for md devices monitoring/managing. ]
|---------------------------|--------------------------------------------------------------
|xfwm4-themes | No big fan of theming unless required for XFCE. |
|btrfs-progs | No need for btrfs support (if it is what package does). |
|ipw2100-fw | No need for Intel centrino drivers. |
|ipw2200-fw | No need for Intel PRO/wireless. |
|zd1211-firmware | I think no need for in-kernel26 zd1211rw wireless driver. |
6. Please guide what further can be removed.
Thank you for time.
Update: Del packages are already removed based on learning/thread discussion so far.
Last edited by jackpot (2015-03-25 14:31:31)An update
I managed to reach:
pacman -Q | wc -l
475
From 536, more may be possible but need to learn a bit more. Packages installed now include:
acl 2.2.52-2
adwaita-icon-theme 3.14.1-1
alsa-lib 1.0.29-1
alsa-utils 1.0.29-1
archlinux-keyring 20150212-1
at-spi2-atk 2.14.1-1
at-spi2-core 2.14.1-1
atk 2.14.0-1
attr 2.4.47-1
avahi 0.6.31-14
bash 4.3.033-1
bc 1.06.95-1
binutils 2.25-2
bleachbit 1.6-1
bzip2 1.0.6-5
ca-certificates 20140923-9
ca-certificates-cacert 20140824-2
ca-certificates-mozilla 3.17.4-1
ca-certificates-utils 20140923-9
cairo 1.14.2-1
cantarell-fonts 0.0.16-2
cdparanoia 10.2-5
cifs-utils 6.4-1
colord 1.2.9-1
compositeproto 0.4.2-3
coreutils 8.23-1
cracklib 2.9.1-1
cups 2.0.2-3
cups-filters 1.0.67-1
curl 7.41.0-1
damageproto 1.2.1-3
db 5.3.28-2
dbus 1.8.16-2
dbus-glib 0.102-2
dconf 0.22.0-1
desktop-file-utils 0.22-1
device-mapper 2.02.116-1
dhclient 4.3.1-1
dhcpcd 6.7.1-1
diffutils 3.3-2
dropbox 3.2.9-2
e2fsprogs 1.42.12-2
elfutils 0.161-3
eog 3.14.3-1
epdfview 0.1.8-5
exempi 2.2.2-1
exo 0.10.4-2
expat 2.1.0-4
fakeroot 1.20.2-1
file 5.22-1
file-roller 3.14.2-2
filesystem 2015.02-1
findutils 4.4.2-6
firefox 36.0.4-1
fixesproto 5.0-3
flac 1.3.1-1
fontconfig 2.11.1-1
fontsproto 2.1.3-1
foomatic-db-engine 3:20150308-1
freetype2 2.5.5-1
fuse 2.9.3-2
galculator 2.1.3-3
gamin 0.1.10-8
garcon 0.4.0-1
gawk 4.1.1-1
gc 7.4.2-2
gcc 4.9.2-4
gcc-libs 4.9.2-4
gd 2.1.1-1
gdbm 1.11-1
gdk-pixbuf2 2.31.3-1
gettext 0.19.4-1
ghostscript 9.15-2
glib-networking 2.42.1-1
glib2 2.42.2-1
glibc 2.21-2
glu 9.0.0-3
gmp 6.0.0-2
gnome-desktop 1:3.14.2-1
gnome-icon-theme 3.12.0-2
gnome-icon-theme-symbolic 3.12.0-2
gnome-themes-standard 3.14.2.3-1
gnupg 2.1.2-1
gnutls 3.3.13-1
gobject-introspection 1.42.0-1
gpgme 1.5.3-1
gpm 1.20.7-4
graphite 1:1.2.4-1
grep 2.21-2
groff 1.22.3-2
grub 1:2.02.beta2-5
gsettings-desktop-schemas 3.14.1-1
gstreamer0.10 0.10.36-4
gstreamer0.10-base 0.10.36-3
gstreamer0.10-base-plugins 0.10.36-3
gtk-update-icon-cache 2.24.27-1
gtk-xfce-engine 2.10.1-1
gtk2 2.24.27-1
gtk3 3.14.9-1
gtksourceview2 2.10.5-3
guile 2.0.11-2
gvfs 1.22.3-2
gzip 1.6-1
harfbuzz 0.9.38-1
hicolor-icon-theme 0.13-1
hplip 3.15.2-3
hplip-plugin 3.15.2-1
hunspell 1.3.3-1
hwids 20150129-1
iana-etc 2.30-4
icu 54.1-1
inetutils 1.9.2-2
iniparser 3.1-4
inputproto 2.3.1-1
iproute2 3.19.0-1
iptables 1.4.21-1
iputils 20121221-3
iso-codes 3.57-1
jansson 2.7-1
jasper 1.900.1-13
js17 17.0.0-1
json-glib 1.0.2-1
kbd 2.0.2-1
kbproto 1.0.6-2
keyutils 1.5.9-1
kmod 20-1
krb5 1.13.1-1
lcms2 2.6-1
ldb 1.1.20-1
less 471-1
lib32-acl 2.2.52-2
lib32-attr 2.4.47-1
lib32-bzip2 1.0.6-2
lib32-curl 7.41.0-1
lib32-e2fsprogs 1.42.12-1
lib32-expat 2.1.0-2
lib32-fontconfig 2.11.1-1
lib32-freetype2 2.5.5-1
lib32-gcc-libs 4.9.2-4
lib32-gettext 0.19.4-1
lib32-glib2 2.42.2-1
lib32-glibc 2.21-2
lib32-glu 9.0.0-2
lib32-harfbuzz 0.9.38-1
lib32-icu 54.1-1
lib32-keyutils 1.5.9-1
lib32-krb5 1.13.1-1
lib32-libcap 2.24-1
lib32-libdbus 1.8.16-1
lib32-libffi 3.2.1-1
lib32-libgcrypt 1.6.3-1
lib32-libgpg-error 1.18-1
lib32-libice 1.0.9-1
lib32-libldap 2.4.40-1
lib32-libnl 3.2.25-1
lib32-libpcap 1.6.2-1
lib32-libpng 1.6.16-1
lib32-libsm 1.2.2-1
lib32-libssh2 1.4.3-2
lib32-libusb 1.0.19-1
lib32-libx11 1.6.3-1
lib32-libxau 1.0.8-1
lib32-libxcb 1.11-1
lib32-libxcursor 1.1.14-1
lib32-libxdamage 1.1.4-2
lib32-libxdmcp 1.1.1-2
lib32-libxext 1.3.3-1
lib32-libxfixes 5.0.1-1
lib32-libxi 1.7.4-1
lib32-libxml2 2.9.2-1
lib32-libxrandr 1.4.2-1
lib32-libxrender 0.9.8-1
lib32-ncurses 5.9-3
lib32-nvidia-340xx-libgl 340.76-1
lib32-nvidia-340xx-utils 340.76-1
lib32-openssl 1.0.2.a-1
lib32-pcre 8.36-1
lib32-readline 6.3.006-1
lib32-systemd 218-1
lib32-util-linux 2.25.2-1
lib32-xz 5.2.1-1
lib32-zlib 1.2.8-1
libaio 0.3.110-1
libarchive 3.1.2-8
libassuan 2.1.3-1
libatasmart 0.19-3
libatomic_ops 7.4.2-1
libbluray 0.7.0-1
libbsd 0.7.0-1
libcap 2.24-2
libcap-ng 0.7.4-1
libcddb 1.3.2-4
libcdio 0.93-1
libcdio-paranoia 10.2+0.93+1-1
libcroco 0.6.8-2
libcups 2.0.2-3
libdaemon 0.14-3
libdatrie 0.2.8-1
libdbus 1.8.16-2
libdrm 2.4.60-1
libedit 20141030_3.1-1
libepoxy 1.2-2
libevdev 1.4-1
libevent 2.0.22-1
libexif 0.6.21-2
libffi 3.2.1-1
libfontenc 1.1.2-1
libgcrypt 1.6.3-2
libglade 2.6.4-5
libgpg-error 1.18-1
libgphoto2 2.5.7-1
libgusb 0.2.4-1
libice 1.0.9-1
libidn 1.30-1
libieee1284 0.2.11-5
libimobiledevice 1.2.0-1
libjpeg-turbo 1.4.0-1
libkeybinder2 0.3.0-2
libksba 1.3.2-1
libldap 2.4.40-2
libmm-glib 1.4.4-1
libmpc 1.0.3-1
libndp 1.4-1
libnewt 0.52.17-2
libnl 3.2.25-1
libnm-glib 1.0.0-2
libnm-gtk 1.0.0-1
libnotify 0.7.6-1
libogg 1.3.2-1
libomxil-bellagio 0.9.3-1
libpaper 1.1.24-7
libpcap 1.6.2-1
libpciaccess 0.13.3-1
libpeas 1.12.1-1
libpipeline 1.4.0-1
libplist 1.12-1
libpng 1.6.16-1
libproxy 0.4.11-5
librsvg 1:2.40.8-1
libsamplerate 0.1.8-3
libsasl 2.1.26-7
libseccomp 2.1.1-1
libsecret 0.18-1
libsm 1.2.2-2
libsndfile 1.0.25-3
libsoup 2.48.1-1
libssh2 1.4.3-2
libsystemd 218-2
libtasn1 4.3-1
libteam 1.14-1
libthai 0.1.21-1
libtheora 1.1.1-3
libtiff 4.0.3-5
libtirpc 0.2.5-1
libtool 2.4.6-1
libtxc_dxtn 1.0.1-6
libunique 1.1.6-6
libunistring 0.9.5-1
libunwind 1.1-2
libusb 1.0.19-1
libusbmuxd 1.0.10-1
libutil-linux 2.26.1-3
libvisual 0.4.0-5
libvorbis 1.3.4-1
libvpx 1.3.0-1
libwbclient 4.2.0-1
libwnck 2.31.0-1
libx11 1.6.3-1
libxau 1.0.8-2
libxcb 1.11-1
libxcomposite 0.4.4-2
libxcursor 1.1.14-2
libxdamage 1.1.4-2
libxdmcp 1.1.2-1
libxext 1.3.3-1
libxfce4ui 4.12.1-1
libxfce4util 4.12.1-1
libxfixes 5.0.1-1
libxfont 1.5.1-1
libxft 2.3.2-1
libxi 1.7.4-1
libxinerama 1.1.3-2
libxkbcommon 0.5.0-1
libxkbfile 1.0.8-2
libxklavier 5.4-1
libxml2 2.9.2-2
libxmu 1.1.2-1
libxpm 3.5.11-1
libxrandr 1.4.2-2
libxrender 0.9.8-1
libxres 1.0.7-1
libxshmfence 1.2-1
libxslt 1.1.28-3
libxt 1.1.4-1
libxtst 1.2.2-1
libxv 1.0.10-1
libxxf86vm 1.1.4-1
linux 3.19.2-1
linux-api-headers 3.18.5-1
linux-firmware 20150206.17657c3-1
llvm-libs 3.6.0-3
logrotate 3.8.9-1
lxdm 0.5.0-4
lz4 127-1
lzo 2.09-1
make 4.1-1
man-db 2.7.1-1
man-pages 3.81-1
mcpp 2.7.2-5
mesa 10.5.1-2
mime-types 9-1
mkinitcpio 18-2
mkinitcpio-busybox 1.21.1-2
mobile-broadband-provider-info 20120614-2
mousepad 0.4.0-1
mozilla-common 1.4-4
mpfr 3.1.2.p11-1
mtdev 1.1.5-1
nano 2.2.6-3
ncurses 5.9-7
net-snmp 5.7.3-1
netctl 1.10-1
nettle 2.7.1-1
network-manager-applet 1.0.0-1
networkmanager 1.0.0-2
npth 1.1-1
nspr 4.10.8-1
nss 3.17.4-1
ntfs-3g 2014.2.15-1
ntp 4.2.8.p1-1
nvidia-340xx 340.76-6
nvidia-340xx-libgl 340.76-2
nvidia-340xx-utils 340.76-2
openjpeg 1.5.2-1
openresolv 3.6.1-1
openssl 1.0.2.a-1
orc 0.4.23-1
os-prober 1.64-1
p11-kit 0.22.1-3
p7zip 9.38.1-1
package-query 1.5-2
pacman 4.2.1-1
pacman-mirrorlist 20150315-1
pam 1.1.8-5
pambase 20130928-1
pango 1.36.8-1
pciutils 3.3.0-1
pcmciautils 018-7
pcre 8.36-2
perl 5.20.2-1
perl-clone 0.37-2
perl-dbi 1.633-1
perl-xml-libxml 2.0117-1
perl-xml-namespacesupport 1.11-3
perl-xml-sax 0.99-4
perl-xml-sax-base 1.08-3
pinentry 0.9.0-1
pixman 0.32.6-1
polkit 0.112-2
polkit-gnome 0.105-2
poppler 0.31.0-1
poppler-glib 0.31.0-1
popt 1.16-7
procps-ng 3.3.10-1
psmisc 22.21-2
pth 2.0.7-5
pygobject2-devel 2.28.6-11
pygtk 2.24.0-5
python 3.4.3-1
python2 2.7.9-1
python2-cairo 1.10.0-2
python2-gobject2 2.28.6-11
qpdf 5.1.2-1
randrproto 1.4.1-1
readline 6.3.006-1
recordproto 1.14.2-2
renderproto 0.11.1-3
rest 0.7.92-1
samba 4.2.0-1
sane 1.0.24-4
sed 4.2.2-3
shadow 4.2.1-3
shared-mime-info 1.4-1
simple-scan 3.14.2-1
slang 2.3.0-1
smbclient 4.2.0-1
sqlite 3.8.8.3-1
startup-notification 0.12-4
sudo 1.8.12-1
sysfsutils 2.1.0-9
systemd 218-2
systemd-sysvcompat 218-2
talloc 2.1.1-1
tar 1.28-1
tdb 1.3.4-1
tevent 0.9.24-1
texinfo 5.2-3
thunar 1.6.6-1
thunar-archive-plugin 0.3.1-5
thunar-volman 0.8.1-1
thunderbird 31.5.0-1
ttf-dejavu 2.34-2
ttf-ms-fonts 2.0-10
ttf-urdufonts 1.2-3
tumbler 0.1.31-1
tzdata 2015a-1
udisks2 2.1.5-1
upower 0.99.2-2
usbutils 008-1
util-linux 2.26.1-3
v4l-utils 1.6.2-1
vi 1:050325-4
videoproto 2.3.2-1
vte 0.28.2-5
vte-common 0.38.3-1
wayland 1.7.0-1
wget 1.16.3-1
which 2.20-7
wine 1.7.39-2
wine-mono 4.5.6-1
wine_gecko 2.36-1
wpa_supplicant 2.3-1
xcb-proto 1.11-1
xcb-util 0.4.0-1
xextproto 7.3.0-1
xf86-input-evdev 2.9.1-1
xf86-input-keyboard 1.8.0-3
xf86-input-mouse 1.9.1-1
xf86vidmodeproto 2.3.1-3
xfce4-appfinder 4.12.0-1
xfce4-mixer 4.11.0-2
xfce4-panel 4.12.0-1
xfce4-power-manager 1.4.4-1
xfce4-session 4.12.1-2
xfce4-settings 4.12.0-3
xfce4-terminal 0.6.3-2
xfce4-whiskermenu-plugin 1.5.0-2
xfconf 4.12.0-1
xfdesktop 4.12.1-1
xfwm4 4.12.2-1
xineramaproto 1.2.1-3
xkeyboard-config 2.14-1
xorg-bdftopcf 1.0.5-1
xorg-font-util 1.3.1-1
xorg-font-utils 7.6-4
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-4
xorg-fonts-misc 1.0.3-3
xorg-iceauth 1.0.7-1
xorg-mkfontdir 1.0.7-2
xorg-mkfontscale 1.1.2-1
xorg-server 1.17.1-4
xorg-server-common 1.17.1-4
xorg-server-utils 7.6-4
xorg-sessreg 1.1.0-1
xorg-setxkbmap 1.3.0-2
xorg-xauth 1.0.9-1
xorg-xbacklight 1.2.1-1
xorg-xcmsdb 1.0.4-2
xorg-xgamma 1.0.5-2
xorg-xhost 1.0.6-1
xorg-xinit 1.3.4-2
xorg-xinput 1.6.1-1
xorg-xkbcomp 1.3.0-1
xorg-xmodmap 1.0.8-1
xorg-xrandr 1.4.3-1
xorg-xrdb 1.1.0-1
xorg-xrefresh 1.0.5-1
xorg-xset 1.2.3-1
xorg-xsetroot 1.1.1-2
xproto 7.0.27-1
xz 5.2.1-1
yajl 2.1.0-1
yaourt 1.5-1
zlib 1.2.8-3
EDIT:
More suggestions welcome.
Last edited by jackpot (2015-03-25 17:27:24) -
[SOLVED] cannot install package query
I want to install yaourt, but I can't seem to install package query. I acquired the tarball from here and followed all the steps here
[maarten@maarten ~]$ cd ~/src
[maarten@maarten src]$ tar -zxvf package-query.tar.gz
package-query/
package-query/PKGBUILD
[maarten@maarten src]$ cd ~/src/package-query
[maarten@maarten package-query]$ makepkg -s
==> Making package: package-query 1.0.1-1 (Sun Jul 8 11:09:03 CEST 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading package-query-1.0.1.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 361k 100 361k 0 0 205k 0 0:00:01 0:00:01 --:--:-- 226k
==> Validating source files with md5sums...
package-query-1.0.1.tar.gz ... Passed
==> Extracting Sources...
-> Extracting package-query-1.0.1.tar.gz with bsdtar
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop
checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking ctype.h usability... yes
checking ctype.h presence... yes
checking for ctype.h... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking for alpm_version in -lalpm... yes
checking for yajl_free in -lyajl... yes
checking for gawk... (cached) gawk
checking for curl-config... /usr/bin/curl-config
checking for the version of libcurl... 7.26.0
checking for libcurl >= version 7.19.4... yes
checking whether libcurl is usable... yes
checking for curl_free... yes
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking for CFPreferencesCopyAppValue... no
checking for CFLocaleCopyCurrent... no
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for git... git
checking for .git/... no
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating doc/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing po-directories commands
package-query:
Build information:
source code location : .
prefix : /usr
sysconfdir : /etc
conf file : /etc/pacman.conf
localstatedir : /var
database dir : /var/lib/pacman/
compiler : gcc
compiler flags : -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2
package-query version : 1.0.1
using git version : no
git ver :
Variable information:
root working directory : /
aur base url : [url]http://aur.archlinux.org[/url]
make all-recursive
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
Making all in src
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT aur.o -MD -MP -MF .deps/aur.Tpo -c -o aur.o aur.c
mv -f .deps/aur.Tpo .deps/aur.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT alpm-query.o -MD -MP -MF .deps/alpm-query.Tpo -c -o alpm-query.o alpm-query.c
alpm-query.c: In function 'alpm_pkg_get_realsize':
alpm-query.c:486:9: warning: ignoring return value of 'chdir', declared with attribute warn_unused_result [-Wunused-result]
mv -f .deps/alpm-query.Tpo .deps/alpm-query.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT util.o -MD -MP -MF .deps/util.Tpo -c -o util.o util.c
util.c: In function 'ltostr':
util.c:532:11: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'itostr':
util.c:525:11: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'concat_backup_list':
util.c:480:12: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'string_fcat':
util.c:342:11: warning: ignoring return value of 'vasprintf', declared with attribute warn_unused_result [-Wunused-result]
mv -f .deps/util.Tpo .deps/util.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT color.o -MD -MP -MF .deps/color.Tpo -c -o color.o color.c
mv -f .deps/color.Tpo .deps/color.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT package-query.o -MD -MP -MF .deps/package-query.Tpo -c -o package-query.o package-query.c
mv -f .deps/package-query.Tpo .deps/package-query.Po
/bin/sh ../libtool --tag=CC --mode=link gcc -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -lcurl -Wl,-O1,--sort-common,--as-needed,-z,relro -o package-query aur.o alpm-query.o util.o color.o package-query.o -lyajl -lalpm
libtool: link: gcc -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o package-query aur.o alpm-query.o util.o color.o package-query.o -lcurl -lyajl -lalpm
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
Making all in doc
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
==> Entering fakeroot environment...
==> Starting package()...
Making install in src
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
test -z "/usr/bin" || /bin/mkdir -p "/home/maarten/src/package-query/pkg/usr/bin"
/bin/sh ../libtool --mode=install /usr/bin/install -c package-query '/home/maarten/src/package-query/pkg/usr/bin'
libtool: install: /usr/bin/install -c package-query /home/maarten/src/package-query/pkg/usr/bin/package-query
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
Making install in doc
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/man/man8" || /bin/mkdir -p "/home/maarten/src/package-query/pkg/usr/share/man/man8"
/usr/bin/install -c -m 644 package-query.8 '/home/maarten/src/package-query/pkg/usr/share/man/man8'
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
==> Tidying install...
-> Purging unwanted files...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: package-query 1.0.1-1 (Sun Jul 8 11:09:18 CEST 2012)
[maarten@maarten package-query]$ dir
PKGBUILD package-query-1.0.1.tar.gz src
package-query-1.0.1-1-i686.pkg.tar.xz pkg
[maarten@maarten package-query]$ sudo pacman -U package-query-1.0.1-1-i686.pkg.tar.xz
Password:
loading packages...
error: 'package-query-1.0.1-1-i686.pkg.tar.xz': invalid or corrupted package (PGP signature)
I already reran pacman-key --init and pacman-key --populate archlinux after removing the allready acquired signatures (/etc/pacman.d/gnupg). But it keeps returning the same error.
Do I need to add another key manually to install packages manually from the AUR?
Last edited by maartennnnnnn (2012-07-08 09:44:01)I edited your post to change the \[quote\] tags to \[code\] tags - it makes for a much easier to read post
https://wiki.archlinux.org/index.php/Fo … s_and_Code
Two options are to change your SigLevel or sign your own key... -
Error Installing Packaged Applications - Apex 5
Hi Folks:
I installed APEX 5 successfully. Everything seems to be running fine except I'm unable to install packaged applications.
I get a screen that looks like the following when trying to install a package application:
The text in the dropdowns for the errors begins with:
Error
The packaged application installed. However, installation of database objects and seed data has failed.
Install Summary
Script Name Status Statements Successful Statements with Errors Total Statements
Framework Package Specification Success 1 0 1
Framework Package Body Errors 0 1 1
eba_dp_ui spec Success 1 0 1
eba_dp_ui body Errors 0 1 1
Missing Indexes Errors 0 7 7
Filter Search Spec Errors 0 1 1
Filter Search Body Errors 0 1 1
eba_dp_data_access body Errors 0 1 1
eba_dp_dashboard body Errors 0 1 1
eba_dp_demo_data spec & body Errors 1 1 2
Report Total: 3 14 17
1 - 10
Errors
Framework Package Body
CREATE OR REPLACE PACKAGE BODY "EBA_DP_FW" as
function conv_txt_html (
p_txt_message in varchar2 )
return varchar2
is
l_html_message varchar2(32767) default p_txt_message;
l_temp_url varchar2(32767) := null;
l_length number;
begin
l_html_message := replace(l_html_message, chr(10), '<br />');
l_html_message := replace(l_html_message, chr(13), null);
return l_html_message;
end conv_txt_html;
function conv_urls_links (
p_string in varchar2 )
return varchar2
is
l_string varchar2(32767) default p_string;
It then includes a lot more create, etc. statements that failed.
I wonder if it is some kind of permissions issue? I ended up running @apxremov.sql and reinstalled apex 5 again after I couldn't get the package apps to work the first time but that didn't fix anything. I have attached a text file that has all the code from the error message.
The database I installed to is an Oracle 12c Enterprise database.
It had Oracle Apex 4.2.6 installed on it with many packaged apps (not really using them, just trialing them till 5 came out). I ran @apxremov.sql before installing Apex 5.
Any help or ideas are appreciated.
Thanks,
Matthew FriendMatthew,
Looking at the error file, it appears that APEX is trying to "upgrade" an existing Data Reporter instance rather than do a fresh install. It's possible (I haven't checked the code) that apexremov.sql doesn't run the packaged applications through their deinstall process, and so their supporting objects may still be present within your schema. I'd suggest removing any objects (especially tables & packages) with a name like 'EBA_DP_%' from your parsing schema, and then trying the install again.
Regards,
-D. -
[SOLVED] Unable to install packages in lxc container
tl;dr: lxc-console should be used for logging in, not lxc-attach. Also, I had to do some additional work to get the tty to work in systemd, and I plan to update the wiki soon.
I created a container using the following command:
# lxc-create -n test -t archlinux
Once created and configured, I started the container daemonized, and attached:
# lxc-start -n test -d
# lxc-attach --clear-env -n test -- su - root
However, I am unable to install any software packages because GPG isn't working properly
[root@test ~]# pacman -Syu openssh
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Packages (3): ldns-1.6.17-1 libedit-20130601_3.1-1 openssh-6.5p1-2
Total Installed Size: 6.08 MiB
:: Proceed with installation? [Y/n]
(3/3) checking keys in keyring [###########################] 100%
(3/3) checking package integrity [###########################] 100%
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: GPGME error: Inappropriate ioctl for device
error: libedit: missing required signature
:: File /var/cache/pacman/pkg/libedit-20130601_3.1-1-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: ldns: missing required signature
:: File /var/cache/pacman/pkg/ldns-1.6.17-1-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: openssh: missing required signature
:: File /var/cache/pacman/pkg/openssh-6.5p1-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
error: segmentation fault
Please submit a full bug report with --debug if appropriate.
The container config is as follows:
lxc.utsname=test
lxc.autodev=1
lxc.tty=1
lxc.pts=1024
lxc.rootfs=/var/lib/lxc/test/rootfs
lxc.mount=/var/lib/lxc/test/fstab
lxc.cap.drop=mknod sys_module mac_admin mac_override
lxc.kmsg=0
lxc.stopsignal=SIGRTMIN+4
#networking
lxc.network.type=veth
lxc.network.link=br0
lxc.network.flags=up
lxc.network.name=eth0
lxc.network.ipv4=10.10.209.2/24
lxc.network.ipv4.gateway=10.10.209.1
lxc.network.mtu=1500
#cgroups
lxc.cgroup.devices.deny = a
lxc.cgroup.devices.allow = c *:* m
lxc.cgroup.devices.allow = b *:* m
lxc.cgroup.devices.allow = c 1:3 rwm
lxc.cgroup.devices.allow = c 1:5 rwm
lxc.cgroup.devices.allow = c 1:7 rwm
lxc.cgroup.devices.allow = c 1:8 rwm
lxc.cgroup.devices.allow = c 1:9 rwm
lxc.cgroup.devices.allow = c 1:9 rwm
lxc.cgroup.devices.allow = c 4:1 rwm
lxc.cgroup.devices.allow = c 5:0 rwm
lxc.cgroup.devices.allow = c 5:1 rwm
lxc.cgroup.devices.allow = c 5:2 rwm
lxc.cgroup.devices.allow = c 136:* rwm
Has anyone else experienced this? I've searched the web for solutions to the GPG error, and most of them relate to GPG not working in a chroot because the right things don't exist in /dev. However, I was under the impression that lxc.autodev=1 would take care of this, and indeed /dev/pts, etc. all exist in the container.
Last edited by archtaku (2014-02-07 23:19:12)x33a wrote:
Try
# pacman-key --refresh-keys
from within the container. Though, I do notice a segmentation fault, so I am not sure if it'll work.
I just did this, and the command succeeded:
gpg: refreshing 75 keys from hkp://pool.sks-keyservers.net
gpg: requesting key 5263801D from hkp server pool.sks-keyservers.net
gpg: requesting key FFF979E7 from hkp server pool.sks-keyservers.net
gpg: requesting key CDFD6BB0 from hkp server pool.sks-keyservers.net
gpg: requesting key 4C7EA887 from hkp server pool.sks-keyservers.net
... snip ...
gpg: Total number processed: 74
gpg: unchanged: 74
However, the installation still failed.
I was able to get pacman to install openssh by turning off signature verification. I then ssh'ed into the container, turned signature verification back on, and was able to install other packages just fine.
So the issue seems to be with how lxc-attach connects to the container. A temporary solution would be:
Add openssh to the list of packages installed when running lxc-create.
# lxc-create -n test -t archlinux -- -P vim,openssh
Attach to the container and run systemctl enable sshd.service, and set a root password
Detach, then ssh into container and go about your business.
However, I'd rather have the option of not using sshd on the container, and still be able to install packages, so I don't necessarily consider this problem solved yet.
Can anyone shed some light on what I might be doing wrong when I attach to the container?
Last edited by archtaku (2014-02-07 16:46:52)
Maybe you are looking for
-
Function Module for retreiving delta bill of materials
Hi Experts, Is there any function module in SAP for retreiving delta bill of materials,please repond quickly as it is most urgent to me. Regards, Sridevi.
-
Is it mandatory to use Business object for data transfer and work flow?
<font size="3"> <pre> In our enterprise projects we deal with some screens where we add or update some data and again we retrieve that data and display to user in various ways like displaying on screen as a report or viewing in excel etc.. Most of th
-
Dropdown list in selection screen linking with Ztable
Hi, In selection screen, i coded for parameter with dropdownlist with hardcoded values in the list. Client asking me link this list to Z table fields so that whenever they make entries in future just he need to create a variant for the new entries an
-
Compiling JavaFX and Java into a single JAR
Perhaps I am missing something, but is there a simple way to compile both Java and JavaFX sources into a single JAR? The issue is cross references between Java and JavaFX. Using javac or javafxc separately, cross references are handled by the compile
-
Malicious messages are being sent from my account
Malicious messages are being sent from my SKYPE account I have changed my password now will this stop it? Is anyone else having this problem is it a virus or does it mean my account has been hacked or something?