Totally confused and disappointed with JSC!

Hi,
I invested my own money in JSC, so that I can convince my Department to use it. My first "real" application after doing the tutorials is a real disaster!
I used the "Performing Inserts, Updates and Deletes" to do it. In other words, I basically only changed the data source and tables. Great was my disappointment when the application would not work correctly at the point "Testing your application - Part 2". See my topic "Button update_action not setting value in Sessionbean 1" The responses I got were all good - but none worked! What I want to know is, why is all the advice I'm getting different from the code in the tutorial? Is there someting I'm missing? What am I doing wrong? Is the code in the Tutorial wrong, or incomplete? Why should the code I use in my application be different from the Tutorial? Please help, urgently!
Regards,
Johan

Hello Johan,
I can understand your frustration. What has
happened is that JSC doesn't support switching
datasources during development very well.
This is because of the JDBC datatype mapping,
JDBC url differences.
If you change the database and datasource it's safest to
regenerate the code. The URL, JDBC datatypes
will be generated based on the database schema.
You can try to fix the generated code, but not encouraged.
If you're using the same database, and change the
datasource (in the Server Navigator) there are a couple
of places where you'll need to fix the code.
One place is in the Page1 bean constructor
the other is in SessonBean1.
You'll need to change the JDBC url which is
generated.
I hope this helps,
John
JSC QA

Similar Messages

  • Very pleased and disappointed with WRT1900AC

    I am very pleased, and very disappointed with this device.
    I live in a three story townhouse, built using metal grids and plaster.  The WAP is performing flawlessly on both bands, except for a couple of lockups when trying to reconfigure.
    The problem is that the salesman gave me a bunch of dodo;  He said:
    1.  the router supported Network Syslog;  it doesn't support syslog.
    2. the router supported ssh access;  it does not
    3. the router supported VPN;  not
    4. the router would support wifi access and configuration via mobile app;  not
    I pre-ordered the device before it was available because it sounded so good;  I guess I should have known better;  if it sounds too good to be true, it isn't.

    I would have talked to Linksys support first or come to the forums. Salesman will tell you almost anything to make a sale. I tend to not trust salesmen. Always ask Mfr support or ask other users in the forums. 
    There is a mobile app for Apple...

  • Confusion and disappointment

    Greetings everyone, I am Mark from Alaska. I have had my Web site: www.topcover.com at .mac since the service was initiated. After purchasing iLife 06 (for the sole reason of upgrading my site with iWeb) and reading all the online help pages and reading the .pdf manual I am still confused as ever. Considering how much money I give to Apple every year, I expected that the transition from Home Page to iWeb would be "easy." No so. First, I use an URL forwarding service for routing viewers from my topcover URL to the Home page address. I built my blog using Blog.Mac. Here are my questions (and I appreciate any and all help):
    1.How do I swap out my old site home page with the new one I constructed in iWeb?
    2. How do I transfer my Home Page pages to iWeb one at .Mac?
    3. Will my Blog.Mac blog be supported by iWeb? If so, how do I transfer it?
    4. How do I transfer my resume to the iWeb site I'm making?
    G-4 17" 1.67 GHz Powerbook   Mac OS X (10.4.4)   .mac user since inception, Mac user since 1987

    Is
    there a way to substitute my new main home page with
    topcover's current one (while keeping the same URL
    and menu tree)?
    Still not sure I understand what you really want to do. You ask your forwarding service to switch the place where your current url points from homepage.mac.com/username to web.mac.com/username/iWeb. That means your new iWeb page will come up instead of your old "homepage" homepage. On your new iWeb page you can make hyperlinks to any old page you want (e.g to homepage.mac.com/username/pagename.html). But the navigation menu at the top can only go to iWeb-produced pages. These you would need to do from scratch.
    I'd like to be able to swap pages and then transfer
    my existing Home Page pages (and from here on out I
    will make new pages from scratch). How do I bring
    over my Home Pages to iWeb?
    There is no point in physically bringing over your old pages to the iWeb "space", if that's what you mean. You just link to them where they already are. If you are talking about importing your old pages in the iWeb program itself, this is impossible, you have to redo them.
    #3: How do I transfer my Mac.Blog blog to iWeb?
    Physically transferring has no point. Just link to it where it is. You can't import it into the iWeb program, and a new blog created in iWeb will have very limited features.
    #4: I have tried to make a hyperlink from my Home
    Page resume to my new pages but nothing worked... I
    need help here as well.
    Isn't it the other direction you want the link for, from your new iWeb page back to your Resume? This is just done via the insert hyperlink function.
    If I've misread your intentions again, just keep trying...

  • Extremely frustrated and disappointed with my first Lenovo Ordering experience

    I have been trying to place an order on Lenovos website for 1 month now and my order has been cancelled 4 times. The last order number being 4243470440.
    To give a background of the situation, I am trying to order a Lenovo Yoga 2 Pro on behalf of my friend who does not have access to a US credit card yet.
    The first time it was cancelled because the ship to address was a freight forwarding address. I did not know that Lenovo will not ship to one of those addresses.
    SO I redo the entire order based on what the customer care person asks me to do and then it gets rejected again. So i call the helpline again and after the long wait I am told that the ship to address is different from the billing address. I need to call my credit card company to let them know this.
    So I do the needful and place a third order after calling my credit card company first. This time it gets cancelled because apparently, Lenovos system now links my credit card with the freight forwarding address and has blacklisted it for life. So basically I can never order a lenovo product using that credit card again. Hence, I am advised by Pablo, an extremely rude credit card service agent to reorder using a different card.
    I do the needful for the 4th time with a different credit card and to my surprise it is cancelled again. After another long hold and call, I am informed that I as a person am working for the freight forwarding company! (Who the [ Moderator Edited per forum rules.] are they to determine who i work for. I am ordering a computer not asking for keys to the US treasury). So I am blacklisted and the only way I can order a lenovo product is if I wire the money to them before hand. This is [ Moderator Edited per forum rules.]
    I am a normal guy trying to order a computer for my friend and have been put through so much humiliation and torture. I am extremely disappointed at Lenovo and dont think I ever want to buy anything from this company ever.

    Hi brajeshdamani,
    I do not work for Lenovo. This is a peer-to-peer forum, provided by Lenovo so that members may share their experiences and help each other.
    Perhaps Lenovo may be using a third party company to verify credit card purchases. In most cases these companies determine if a customer's credit card is good and if the customer has sufficient credit to make the purchase. If an item is going to be shipped to someone outside the US, this would make ordering even more difficult. Recently in the US we have seen articles in the news about stolen credit card information. The verification companies are aware of this; thus the problems customers are experiencing. You are not alone. It is really a shame that honest people have to deal with inconveniences because of criminal activity.
    I don't have any suggestions for you to resolve your problem, except that perhaps you persist in contacting Lenovo to explain the situation.
    ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
    If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
    Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
    Microsoft MVP - Consumer Security
    SpywareHammer

  • Lightroom, Assertion Fail, and my utter frustration and disappointment with Adobe

    Right now it is after 3AM and I have been trying for hours to get my very expensive Adobe software to work because it decided break even though I had not changed anything since it all worked correctly last weekend.
    I have been using Lightroom since it initial beta and rely on it to do my job as a photographer. I upgraded to 5.4 the day it came out, which has not been several months ago. It all that time I have not had any problems. Specifically, a week ago it was working just fine. In case this is relevant, despite having full Lightroom 5 and Photoshop CS6 licenses, I went ahead and signed up for CC while the photographer bundle was still available. Anyway, tonight I came home after photographing and event and went to start the import process only to find that Lightroom decided it wanted me to register again, and then did two "Assertion Failure" popups before completely failing to work. This happens if I just launch the application or click on an individual catalog to open it. My deadline which requires the processing of almost 800 photos is what is now this afternoon.
    So far I have:
    * Run through the entire Adobe provided steps listed here: Error: 'assertion failed' | Update | Windows
    * Tried running the application as admin
    * Rebooted the computer
    * Uninstalled and reinstalled 5.4 using CC
    * Uninstalled and installed 5.3 manually
    * Manually installed the 5.4 upgrade on top of 5.3
    * Tried Chatting with a "Customer Service" rep. This name is completely false. As a customer, the service I need is for the software that I both bought and subscribed to to work when I need it to work for my job. The person I was selected to chat with told me that they had no way to help me with any sort of technical issue and I would need to call tech support starting Monday at 5AM. This is completely insane. Why are they even available on the weekend if they can't solve technical issues? Who sits around on Friday night with issues important enough to contact support immediately that aren't technical in nature?
    This is made even more fun by the fact that it would appear all or most of the Adobe website is offline right now.
    At this point I am at a complete loss for how I am suppose to make this work. Any suggestions for solutions other than was I have listed above would be greatly appreciated. If some technically capable Adobe person happens to see this, I would be more than willing to provide any debug output that might be helpful.

    jgoforth wrote:
    Any suggestions for solutions other than was I have listed above would be greatly appreciated.
    Try deleting your preferences file (I mean: rename, or make a backup before deleting). This page has location info:
    Preference and other file locations in Lightroom 5

  • Frustration and disappointment with Word Mole

    I happen to live in the same CANADIAN city (Waterloo, ONTario) that Blackberrys are made. I love word games and was excited that there was a pre-loaded word game on my new Blackberry, Word Mole. Well, you can imagine my HORROR (and shock and disbelief) when I spelled colour (Canadian version always includes a 'u') and the little monster mole laughed at me. I figured it must be an error so I tried "favour" and then 'flavour" and I couldn't submit either of those either. WHAT THE F????
    How can a product that is MADE IN CANADA not recognise (see- Canadian spellling with an 's', not a ZED) it's own native (well, not THAT native, but you know what I mean) language???
    What this means is that I constantly fail to advance b/c my time runs out because I (rightlfully so) default to the language I know. 'Favor, and color and favorite" are foreign words to me. What I don't understand is why there is no Canadian option? Why is everything geared toward American spelling? I feel betrayed and RIM the betrayor!
    Also, the screens are all in American language too. I can't get my "favourites", I can only get Favorites. I don't like it and I want it CHANGED!!

    jgoforth wrote:
    Any suggestions for solutions other than was I have listed above would be greatly appreciated.
    Try deleting your preferences file (I mean: rename, or make a backup before deleting). This page has location info:
    Preference and other file locations in Lightroom 5

  • EA6500 ... Cisco totally confused and lost track

    1) After world wide bla bla announcements it was released with major delay.
    2) Cisco went (back) to Broadcom chipsets again.
    3) Six new firmware releases in 3 months time after the initial release, probably after the many very bad test reports.
    4) Very obscure and lacking firmware release notes (in other words, they are worthless).
    5) Do I need to suggest professional Company Cisco to thoroughly test products, under all possible conditions before to release it?? Poor non-wizkids who bought this "super" router.
    ===========================================================================
    Release Date:            Nov. 10, 2012 (?)
    Firmware version: 1.1.27 (build 144730)
    *undocumented untill now*
    ===========================================================================
    Release Date:            Nov. 5, 2012
    Firmware version:        1.1.27 (Build 144545)
    - Applies the fixes from the previous two releases (1.1.27 build 144156 and build 144027) without requiring a factory reset.
    [brilliant...]
    ===========================================================================
    Release Date:            Oct. 30, 2012
    Firmware version:        1.1.27 (Build 144156)
    ===========================================================================
    Release Date:            Oct. 27, 2012
    Firmware version:        1.1.27 (Build 144027)
    ===========================================================================
    Release Date:            Oct. 12, 2012
    Firmware version:        1.1.27 (Build 142736)
    ===========================================================================
    Release Date:           September 12, 2012
    Firmware version:       1.1.27 (Build 141816)
    ===========================================================================
    Release Date:           August 3, 2012
    Firmware version:       1.1.26 (Build 140196)
    - Initial release

    wouterv wrote:
    1) After world wide bla bla announcements it was released with major delay.
    2) Cisco went (back) to Broadcom chipsets again.
    3) Six new firmware releases in 3 months time after the initial release, probably after the many very bad test reports.
    4) Very obscure and lacking firmware release notes (in other words, they are worthless).
    5) Do I need to suggest professional Company Cisco to thoroughly test products, under all possible conditions before to release it?? Poor non-wizkids who bought this "super" router.
    ===========================================================================
    Release Date:            Nov. 10, 2012 (?)
    Firmware version: 1.1.27 (build 144730)
    *undocumented untill now*
    ===========================================================================
    Release Date:            Nov. 5, 2012
    Firmware version:        1.1.27 (Build 144545)
    - Applies the fixes from the previous two releases (1.1.27 build 144156 and build 144027) without requiring a factory reset.
    [brilliant...]
    ===========================================================================
    Release Date:            Oct. 30, 2012
    Firmware version:        1.1.27 (Build 144156)
    ===========================================================================
    Release Date:            Oct. 27, 2012
    Firmware version:        1.1.27 (Build 144027)
    ===========================================================================
    Release Date:            Oct. 12, 2012
    Firmware version:        1.1.27 (Build 142736)
    ===========================================================================
    Release Date:           September 12, 2012
    Firmware version:       1.1.27 (Build 141816)
    ===========================================================================
    Release Date:           August 3, 2012
    Firmware version:       1.1.26 (Build 140196)
    - Initial release
    The "undocumented until now" version of the firmware, does your router have that firmware version already? I am positive that Cisco will be able to provide "fix" for the current issues that users bumped into using this AC router. I am not sure if it has something to do with the device being a draft n still but anyway, who knows a better firmware is on the way.

  • Totally confused by dual monitor xmonad . . .

    So I thought that each desktop would be considered as one entire workspace.
    But it looks like each desktop is it's own workspace. Which is really confusing.
    Any tips/tricks/hacks from those who use xmonad on two screens to help me make sense of what's going on?
    Thanks.

    timetrap wrote:Where is this in your xmonad.hs? I don't see anything about 'screen' . . .
    It is not defined in hs, I just started to understand xmonad myself so I don't know how to do it yet. When I start X for the first time I activate second monitor MOD+CTRL+ARROW, select ws #7 and switch back to main monitor. Later I select workspaces manually according to monitor I use. It was confusing for me to but sometimes is really handy to be able to use any workspace on any monitor.
    I have xmobar and xmonad running (on 3 machines). One of those machines has two monitors, with one BIG virtual screen (3000 x 1700). I can see two workspaces at once. xmobar shows them as
    [1](2)
    If I have a window opened on workspace 1 (on the left)and then open another window on workspace 2 (on the right). Everything is fine. Until I try and go to workspace 3. Then the window that used to be in workspace 2 (on the right) is now in workspace 2 (on the left) and workspace 3 (on the right) is 'open'.
    This shift will happen only when you select ws 2 to be visible on monitor 1. Try selecting ws 5-7 for second monitor so you don't run into workspace switch confusion and play with workspace switching, you will get it after few tries.
    I am beginning to understand that xmonad is shifting my workspaces one screen at a time. But what I want is to shift all my workspaces at once. Giving myself a "clean slate" to work with, and not a headache from my windows jumping around.
    Should be possible but I have no idea how to code that in xmonad.hs. Anyway, you can't have 'I want ws #5 to cover both my monitors' as far as I know. Should be possible to code something like 'select mon 1 - select ws 1 - select mon 2 - select ws 7' and 'select mon 1 - select ws 2 - select mon 2 - select ws 8' to achieve result you want but I don't know how to do that and I like the way xmonad behaves right now.
    My main problem was to understand workspaces while I was having partial ws display in xmobar -- after I fixed mobar to show all workspaces it was much easier.

  • HT1848 Hi! I am new to i-phone and have a 3gs. I need to update software as itunes will not let me purchase without one. When I go to update it says that there are purchases that have not been downloaded into my library! Am totally confused! Help!!

    Hi!
    Am totally new to iphone and have a 3gs. Am trying to upodate software as in the itunes store it says that I need to to purchase. When I try to update a message says that there are purchases that hav not been down loaded to my library? As far as I know I haven't purchased anything from itunes as it would not let me until i upgraded! Totally confused would it be anything to do with purchases made on my computer through e-bay? Please help me someone as am terrified to upgrade until I know what this message means.
    Would really appreciate any help please.
    Many thanks
    p.s How do you know what operating system you are on?

    http://support.apple.com/kb/HT4972

  • Totally disappointed with Z10

    Dear RIM, unfortunately with the release of your new Blackberry Device (Z10) I noticed that you are not trying to satisfy your huge amount of customers, you are just trying to challenge other brands such as IPhone and Samsung, which is totally wrong because you are different, you were absolutely made for business and professionals, while the above mentioned brands were made for all ages.
    The way you are trying to enhance your product is completely wrong because you have made your device similar to others, which made you miss lots of feature that people were buying your device for.
    Your device used to be a great communication method, poor multimedia device, now became the opposite   
    I am a blackberry fan user, I have started using your products in 2009, started with Blackberry bold 9000, and end up with 9810 os7.1.  One month ago, I purchased the Z10, and I just started using it yesterday because I was scare to be disappointed, where after using your device for almost 30 hours I found the below
    External and hardware
    1-      The device does not have Menu button
    2-      No Telephone buttons (answer and ignore)
    3-      No back button
    4-      No Optical trackpad
    5-      No Silence button
    6-      No Convenience Key
    7-      Battery Life
     Internal and OS level
    1-      Not easy to go to the home screen, I have to swipe, while before I just press the Ignore button
    2-      Does not have notification bar
    3-      No Alert profiles/customer Alert profiles (very important)
    4-      No alerts for specific apps
    5-      No alerts for multiple email accounts
    6-      No easy access to Mobile network (3G/2G), wireless, Bluetooth and Hotspot
    7-      No menu option in the applications panel
    Cut
    Paste
    Copy
    Move
    Favorite
    Hide
    Settings
    Options
    8-      No email icons, I have always to brows up to the hub
    9-      No ability to show some special characters and Arabic letters
    10-   No option to have different vibrates for apps or alerts
    11-   You could not create a proper integration environment between your old devices and Z10
    12-   No copy and paste on the phone dia.
    13-   Call logs cannot be collapse except within the same period of time
    14-   Network coverage is low
    15-   Calls functionality is bad (No redial if the call cannot be proceed)
    16-   No delivery report after sending a text massage
    17-   Device will be security locked even during calls
    18-   Bit hard to switch language typing
    19-   Alerts and ring tones are too low and there is no much available
    20-   Ability to send PIN messages
    Applications  (Blackberry Messenger)
    1-      Cannot Collapse the categories or hide the contacts under the categories  
    2-      No confirmation alert or discard when modifying profiles or refresh to original (Either own or contact)
    3-      Cannot add my PIN for testing purposes
    4-      No select all when broadcasting a massage
    5-      Copy a massage and past, will result in pasting the massage with the sender name
    6-      Not showing special characters in contacts names
    7-      No zoom out when adding display picture
    8-      Cannot send a picture that was taken be screen capture except through the gallery media
    Please note all the above features used to be in the old OS versions, and I am not asking you for something new.
    Three of my friends have already switched back to their old devices, and today after I submit this  
    Please RIM if you cannot add the above features, just produce new products similar to 9810,9900
    finally excuse my english

    I totally disagree. As with anything new there is a steep learning curve. For the consumer, and for the company. Obviously BB is willing to listen to the consumer and add features with updates. Together we can develop this to be an even better device then it already is. I think the New Z10 is fantastic and can hardly wait for the Q10 to come out (most of my friend's are waiting for it). I was also waiting for the Q10 but decided to take the plunge and act on the Z10. Am I ever happy I did. Keep up the good work guys. I look forward to all the new updates. And for bigger and better things to come.

  • Help !! ios 6,iphone,Two ipods & and ipad totally confused !!

    Please can someone help?
    I have an iphone 4 and an ipad, both my boys have an ipod and everything runs under my apple account.
    My first problem is that neither of the children can face time or message. Have set them both up with gmail accounts but neither ipod will accept the associated passwords despite being re set to ensure they are correct.
    They cant receive messages from me, which is what i wanted for them, do i need to give them each an apple id? and if so how do i regulate their app store purchases?
    and when they are given an app store voucher, whos id does it go on?
    My second problem is that since upgrading to ios6 one of the boys is getting all my text messages showing up on his ipod and the other still cant open his messages.
    I have messed around with the settings on both ipods but to no avial and I am now totally confused.
    All I want is for someone to explain how the boys can face time/message, how my messages stop from appearing on their ipods and as for my ipad well i give up!!
    please surely it cant be this difficult?

    You have to set them each up with their own Apple ID, then log out from your Apple ID on their devices and log in with theirs. Make sure that Facetime and Messages are set to receive calls/messages on their Apple IDs, not yours.

  • I am totally disappointed with iTunes Match.

    I have been informed that I am totally disappointed with the operation of iTunesMatch. I use almost all Apple products and never had as many problems as I havewith iTunes Match.
    On my iPhone EVERY time I'll use the iPod.app almost no album covers, andALWAYS have to load them again. Even spending data to get the covers, arescattered in several songs from the album without cover.
    Another problem I'm having is that whenever you post a song to play the iPhoneiPod.app need to access the internet again I do not know what! So if the Internet is slow iPhone Do not start playing, it takes several seconds to start playing a song that's on the iPhone. Before the iPod did not have to play the songs using the cloud, right now the music being on the iPhone it needs to access the internet forfree to start playing. This is absurd!
    Another thing that is happening because of this crap Match iTunes is that I can no longer hear the shuffle all songs that are on my iPhone! If I send random playmode, the iPod.app picks the songs that are in the cloud and starts playing, but immediately stop playing because you have to do is download the music. It wasimpossible to use the iPod.app to hear music. Or is everything on the iPhone and listen to those problems mentioned above or you do not hear and is waiting to download music that I do not want to hear, because the random songs that are putin iCloud from the list.
    I am totally disappointed with the service of garbage that Apple released.

    ITines Match is a pile of useless rubbish. It crashes constantly, fails to complete tasks, goes back to square one, freezes computers and utterly fails to work. Piece of sh1t Apple!

  • If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!

    If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!

    Still it could not find the data network.it searches for voice network instantly and works too. but even full voice network available, there is no data network.when i restart the phone it could find data network.
    Already i reset network settings for two times.

  • Trying to create "screencast", and am totally confused...

    Hi.
    So, I used snapZpro and captured a section of my screen, and saved it out as a quicktime with animation codec, 10 frames per second.....
    I then created a project in FCP, and brought in my files... Created a sequence, and put my mov in there.. It immediately set the sequence to DV/DVCPRO - NTSC, the canvas window shows my footage but it looks wrong-- like the fonts are unreadable, blurry, etc.
    So, I went into sequence settings and set it to Animation, and then I have a RED timeline showing that I need to render everything.. and I am totally confused as to why since the footage is the animation codec... The frame rate in the sequence is 29.97, I thought that was perhaps why it's red, but there is no option in the "edit timebase" for 10fps.. Its only options between 23 and 60...
    My goal is to make some basic edits, and then output again with the animation codec.
    Can anyone please let me know how I should proceed? Rendering my footage seems like the wrong thing to do-- especially since it says it will take 2 hours to do it!!!
    Thanks.
    Message was edited by: Patrick Collins

    there is no option in the "edit timebase" for 10fps.. Its only options between 23 and 60...
    Final Cut Pro works with industry standard codecs, pixel dimensions and frame rates. As soon as you try making custom settings, it's no longer standard and you have to render. Snapz Pro was never designed to work in conjunction with a professional video editing system. You should try [iShowU|http://www.shinywhitebox.com/ishowuhd/main.html] instead, which will let you export to any codec on your computer.

  • Im totally disappointed with apple i want my money back

    hi
    this morning i had a fight with apple suport, i just bought this macbook 2 months ago, and now its dead, and they told me to take my laptop to an apple store and somebody will repair my macbook in there, but im real far away from the nearest apple store and i cant take my macbook  to that place, so i request if somebody can come to my place and pick my laptop but neither the apple support or the apple store cant  pick it up, because "they dont have that service they cant come to my adress and pick my laptop" now the only thing i have to do is sit and wait until that service its availabe
    i really cant go there cause i work and study and i practicaly dont have time to that place.
    im totally disappointed with the service and with the computers, i never thought the hardware would be so s hi itty

    You must have got someone new at support. I called on a Friday with an issue, FedEx was here on Monday morning with a box to send the unit back in for service and on Wednesday morning it was back to me all repaired--at no cost, I might add. Just call back or use the online Express Lane support.
    http://www.apple.com/support/   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

Maybe you are looking for