Totals in Break

Is this possible?
#COLUMN_VALUE# substitution in break report

Jimmy,
If you choose the option "repeat headings on break", which can be found in the region where you enable column breaks on the report attributes page, then you can use substitutions like "#COLUMN_VALUE# total". This would however split your report into a number of sub reports with each having the "#COLUMN_VALUE# total" string as a report header. Probably not exactly what you were asking for but this is currently the only place where you can reference the actual column value as part of your report total label string.
Marc

Similar Messages

  • Removing Totals for Break Columns

    Hi All,
    If we add break on two or three columns in report, it gives totals for each group plus a report level total. Is there any way to remove any group or break's total.
    For example, if we have a report on emp table and having groups on deptno and job columns, it would be giving totals like this:
    JOB TOTAL:               3000
    DEPTNO TOTAL:               3000
    report total:               3000
    How can we remove any of the above totals?
    Thanks
    Zahid Khan
    Deptno

    Looks like this is a popular request!
    I have report with a break on Column 1, 2 and 3. I would like to display the Report totla but not the sub totals at each column break. Can anyone please share their experience on how to get rid of the Sub Total for a break column?
    Thanks.

  • OAF :I need to show totals for columns that breaks on one of the column in Advance Table

    I am using advance table (AT),
    I have a requirement to calculate totals for few columns in the AT, based on the account number ( totals should break on the account # , as shown below )
    Please help.
    Account
    Desc
    Paid Amt
    AP Credit
    acc1
    desc1
    200
    100
    acc1
    desc1
    300
    100
    acc1
    desc1
    400
    100
    Total 900
    Total 300
    acc2
    desc2
    150
    50
    acc2
    desc2
    250
    50
    acc2
    desc2
    100
    150
    Total 500
    Total 200
    Message was edited by: 85de445e-a75a-4f2f-b086-8cb6abb09c5d
    CAN ANY ONE PLEASE PROVIDE ANY INPUTS.. , AS ITS URGENT ! Thanks in advance.

    Any updates on this please !!! ?
    Please suggest if this can be achieved by any other region type or any specific type to be used ??

  • Break Total and Section Totals

    Hi,
    I have a webi report which consist of s section and a break. The report also does a sub total by break and then section. At last we also show grand total.
    The report has section of fleet center.
    The report has break on driver name.
    The report is in drill mode and has drop downs on fleet name and driver name.
    From the drop down menu when I select a particular driver to view information-- the webi shows :
    Totals by that driver ( there is a break on this field)
    Totals by that fleet ( there is a section on this field)
    and Grand total :
    Since I have selected a single driver information to view ---all the three totals comes out to be same .
    The requirement is to hide the other two totals when we select a particular driver information from the drop down so that we only show the driver level totals. I am looking out for a way to hide section and grand totals when we select a particular driver .
    Thank You,

    Hi Wavery,
    Thank you for your response. I tried with the property when section is empty checkbox. In my case I still have  a section value. My section is not empty. Its just that when I select only a particular driver the totaling information is repeated twice once at the break level, section level and grand total.
    I am looking at ways to hide the section total and grand total when we select a particular drive from the drop down so that the redundant information is avoided at section and grand total level.
    Let me know if there is a way out on this.
    Thank you,
    boe user.

  • Break Formatting w/out Break Sums

    I would like to create a report with break formatting on the first column and a grand total of the second column at the end of the report, but no totals per break on the first column. For example, what I would like is something like this,
    Employee      | Task | Hours
    Smith, John     1A     20
                    1B     20
    Jones, Karen    1A     35
                    1B      5
    Grand Total:           80but what I get when I select break formatting and mark a column to be summed is something like this,
    Employee      | Task | Hours
    Smith, John     1A     20
                    1B     20
    Employee Total:        40
    Jones, Karen    1A     35
                    1B      5
    Employee Total:        40
    Grand Total:           80I don't want those lines marked Employee Total, but I can't figure out how to get rid of them while keeping the Grand Total. Am I missing something obvious?
    Thanks,
    Ian

    Hi Ian,
    I haven't found a way to do what you want using the column break functionality.
    However, you could change your sql statement to hide the repeating values. Have a look at the second post in the following thread:
    Re: New Help with Address Display
    the output seems to match what you're trying to achieve.
    Regards
    Andy

  • PPR Report ,How to display Label with TOTAl

    Hi,
    How Can i display PPR Report ,How to display Label with TOTAl like
    [http://apex.oracle.com/pls/apex/f?p=267:30:]
    Thanks
    Edited by: 805629 on Jan 6, 2011 3:34 AM

    Hi,
    For PPR Report:
    Select "Yes" in "Enable Partial Page Refresh" item of "Layout and Pagination" region in Report Attributes of that report.
    For display Label with TOTAL:
    Use "Break Formatting" region in Report Attributes of that report.
    Regards,
    Kartik Patel
    http://patelkartik.blogspot.com/
    http://apex.oracle.com/pls/apex/f?p=9904351712:1

  • WiFi breaks when transferring large file over LAN

    Hi guys,My WiFi mostly behaves itself, however if I try to transfer a large file (The last one was ~1GB) over the LAN (standard SMB file copy), WiFi drops out. It gets roughly 30MB through before connectivity is lost.The WiFi continues to show as connected, but I cannot even ping my router.Only disconecting and reconnecting WiFi re-establishes the connection.Any idea what's up? (My router is the black 'home hub' style. I can't find any version information in it's admin panel.) (And before someone asks, no I'm not telling you the contents of the file as it isn't relevant. With the greatest of respect, if you just ask unrelated questions to pry, please don't waste everyones time.)

    Didn't think of that, thanks. Great workaround.I'm going to call Sky, see if they have any firmware updates or other solution. Surely they wouldn't leave such a big knows issue unfixed. I'll report back with what they say. Edit:Just got off the phone from Sky technical support.This issue was first reported Nov/Dec 2014.The chap I spoke to does not know of a fix, or whether a fix is being worked on, or if a fix will ever be worked on.He has not way of contacting the development team to find out any of this information.He said firmware updates are pushed out to routers every now and again. He does not know when this is going to happen and does not have a way to notify about firmware updates installed on my router. (This terrifies me. Sky have a backdoor into my router and can install any code they wish, without even telling me what they changed/installed). There is no way to turn these auto-updates off either. Here's a key thing he did say though:He said he was not at liberty to provide my ADSL credentials, but if I chose to extract them from the router and install my own router instead, they would not have any problem with that.When I told him that this was against their TOS and they could terminate my contract for doing this, he went silent and just said "errr..." Allowing Sky, their subcontractors and anyone else they choose to install any code they wish to my router whenever they please and have free open access to my entire LAN is a total deal breaker for me. That router is getting unplugged today and I'm putting a new router on the credit card. I told tech support this. I said if they have a problem with that, let's go the legal route. I literally have a recorded call where they give me permission to install my own router. 

  • Music stream breaks when output is bluetooth over wifi

    Hi,
    I own Iphone 4s which runs IOS 6.
    I’m streaming music to bluetooth device from sky.fm, audio galaxy and similar applications.
    When the iphone is connected to the network via wifi, the music stops every ~2 minutes,for a second or less – very annoying.
    This doesn’t happen when I’m connected to the network via 3g.
    I've tried to disable all services which polls for data (e.g. mail) but nothing help
    Any advice,

    Didn't think of that, thanks. Great workaround.I'm going to call Sky, see if they have any firmware updates or other solution. Surely they wouldn't leave such a big knows issue unfixed. I'll report back with what they say. Edit:Just got off the phone from Sky technical support.This issue was first reported Nov/Dec 2014.The chap I spoke to does not know of a fix, or whether a fix is being worked on, or if a fix will ever be worked on.He has not way of contacting the development team to find out any of this information.He said firmware updates are pushed out to routers every now and again. He does not know when this is going to happen and does not have a way to notify about firmware updates installed on my router. (This terrifies me. Sky have a backdoor into my router and can install any code they wish, without even telling me what they changed/installed). There is no way to turn these auto-updates off either. Here's a key thing he did say though:He said he was not at liberty to provide my ADSL credentials, but if I chose to extract them from the router and install my own router instead, they would not have any problem with that.When I told him that this was against their TOS and they could terminate my contract for doing this, he went silent and just said "errr..." Allowing Sky, their subcontractors and anyone else they choose to install any code they wish to my router whenever they please and have free open access to my entire LAN is a total deal breaker for me. That router is getting unplugged today and I'm putting a new router on the credit card. I told tech support this. I said if they have a problem with that, let's go the legal route. I literally have a recorded call where they give me permission to install my own router. 

  • ITunes Match; a waste of time for mobile devices and the impatient

    I recently subscribed to itunes match, aside from being able to upgrade a portion of my lower bitrate files, I am extremely dissapointed (as are many others I've read about having the same issues.) 
    First, getting all of my music on the server was a nightmare.  I spent way more time then I'd like to admit tricking iTunes into accepting my data.  Quite a bit of my library is in fact available for purchase in the itunes store, but only portions of most of the albums actually matched - the remaining portions had to upload. Fine, I'm okay with that aside from not being able to upgrade albums in their entirety, now I have some tracks at 256, others in the same album at 128 or whatever - I decided to selectively chose alums/tracks that I really cared about or didn't feel like re importing from disc in a few cases.  Fine.. annoying, but not a total deal breaker.
    I was finally able to figure out how (without apples help btw.. they didn't know this procedure when I spent an hour or so on the chat, screen sharing with a "specialisdt")  to trick itunes into uploadeing all "waiting" tracks by doing the AAC conversion myself manually and then replacing the compressed data locally with apple lossless files (both m4a files) while retainging the compressed data on the cloud.  fine.. I enjoy trouble shooting and problem solving, I was actually psyched to figure it out and be able to retain my high quality files locally without having doubles or redundant data in an archive elsewhere not within the iTunes data base.  Fine. apple lossless is no wav, aiff, but I can compramise also in order to imbed meta data which wav is not able to do.
    What I want is access to my entire library and to be able to either stream songs over wifi or 4g and/or download locally for when I'm off network in the boonies, etc.  *side note: don't anyone tell me this isn't a streaming service and that it only downloads to the device because it in fact does... it's just intollerably slow more often than not.  Now I can deal with that, that is either my cellular provider throttling me, or it's Apple's servers.  I will assume a bit of both.  also, don't tell me that matched content downloads faster then uploaded content.. that's BS, I've run the tests on multiple devices and there is no consitacy to it.. it all depends on the traffic on iCloud servers, wireless towers and size of the file/leanght of track, etc.  Fine.
    I've run the speed test, I've rebooted divices.  I've reset/confirmed/adjusted network setting.. I've done most of what I could do on my end as a user.  I can't seemlessly stream data on my unlimmited data plan from at&t from apple.. fine.. I get it.. regarless of my slow streaming issues - it's a first world problem.. whatever, I can deal. 
    My biggest gripe is that when I download either matched songs or uploaded content, it's is painfully slow to do so.. it's a waste of time.. manging the library on mobile devices takes forward thought and plenty of patience.. I might as well do this at home tethered to my desktop - convert to 128 to save space and accept my choices and deal with what I have loacally for the time when I'm out and about.   Now whren I buy something from apple over the 4g network or even the edge network,... &*^% downloads lickity split.. *** apple .. fine, it's big business.. I get it.. I for one would have paid 100 bucks a year if this service worked as advertised.. maybe more.,.. it's awesome in  theory, but is not realy for the limelight even still 2 years after the release.. hopefully it'll get better soon...
    Now this works great in my home over laptop, apple tv, but over ipad and iphone.. not so much.. actually working fine right now as long as I don't change the track abruptly... figures after this long rant.... once I continue on my day I'm sure it'll go back to being a pain.
    I'm going to use it at home, maybe on the run very ocasionally.. I guess that's what Apple thought we'd want, but they have been so misleading with this, and so abscent with trouble shooting an technical support that I've given up.. if I wasn't so in love with thier UI's and hardware (for the most part) I'd walk in time since steve jobs is now gone.
    unless you want to wrestle with it for hours and hours, or just want to upgrade your low quality files and bounce.. don't waste your time people.. ^$^$ all that noise
    It's too bad Samsung assinated Steve Jobs.. he'd never let this service be released uptil it was ready.   in the future I may have to go to the dark side and get a galaxy tab and smart phone, a Dell.. window vista.. naaaa just kidding.  *** apple.. p,lease sort your ^$%&7 out.
    Done and done. 
    please fix this Apple, I want to love iTunes match, I really do.

    Firstly, this is a user-to-user forum: you're not talking to Apple here.
    Just saying it 'doesn't work' doesn't make it possible to offer any cogent suggestion - one would need a lot more detail on what you've tried and what the result have been - including your operating system details. However if the thing is actually faulty - this is rare, it works fine for most people, but it can happen - then plainly you need to contact the people you bought it from, or take it into an Apple Store if you can, and ask for a replacement or repair.

  • Web Application Proxy and Safari

    Morning, all.
    I've installed and configured the new Windows Server 2012 R2 AD FS and Web Application Proxy, and I've run into some strange problems. I had some initial problems getting it to work, the documentation is a bit thin, but I now have Sharepoint and Webmail
    published to the Internet.
    I'm using x.509 Certificate Authentication for Extranet.
    In IE on a Windows 8.1 Surface Pro everything works. I can log in using ether a softcert or a SmartCard.
    On my OS X Mac I can log in using Chrome, but Safari won't work.
    Same thing on my iPad running iOS 7.0.4, Safari won't work. Interestingly enough, on my 7.0.4 iPhone it DOES work. Even more interestingly, I CAN Workplace Join the iPad using the URL https://<adfs fqdn>/enrollmentserver/otaprofile but
    I can't authenticate using the URL https://<adfs fqdn>/adfs/ls/IdpInitiatedSignon.aspx.
    I get to select my certificate, but after that I'm getting this error message: "Safari cannot open the page because too many redirects occurred." In the Event log on the AD FS server I'm getting this:
    Encountered error during federation passive request. 
    Additional Data 
    Protocol Name: 
    Saml 
    Relying Party: 
    http://<adfs fqdn>/adfs/services/trust 
    Exception details: 
    Microsoft.IdentityServer.Web.InvalidRequestException: MSIS7042: The same client browser session has made '6' requests in the last '0' seconds. Contact your administrator for details.
       at Microsoft.IdentityServer.Web.Protocols.PassiveProtocolHandler.UpdateLoopDetectionCookie(WrappedHttpListenerContext context)
       at Microsoft.IdentityServer.Web.Protocols.Saml.SamlProtocolHandler.SendSignInResponse(SamlContext context, MSISSignInResponse response)
       at Microsoft.IdentityServer.Web.PassiveProtocolListener.ProcessProtocolRequest(ProtocolContext protocolContext, PassiveProtocolHandler protocolHandler)
       at Microsoft.IdentityServer.Web.PassiveProtocolListener.OnGetContext(WrappedHttpListenerContext context)
    Since it does work on an iPhone running the same browser, and Workplace Join does work on the iPad even if nothing else does I'm thinking there's some UserAgent voodoo going on in parts of the Web Application Proxy. It's no big deal that Safari in OS X doesn't
    work, we can always run Chrome, but the iPad is a major problem and a total deal breaker if I can't fix it.
    I would appreciate some good advice.

    Hi,
    As both IE and Chrome work, I think it’s more a client side issue.
    Maybe you need to clear you browser cache and cookies.
    This also worth a try:
    http://stackoverflow.com/questions/2640030/adfs-v2-0-error-msis7042-the-same-client-browser-session-has-made-6-request
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Hope this helps.

  • E71x Menu and writing languages.

    I'm going to get my upgrade from AT&T soon, and so far the E71x has been the first choice. Now, I know that none of the AT&T phones besides the iPhone have support for languages aside from the typical English, Spanish and French, but I was trying to gauge how much of an endeavour it would be to install dictionaries and a menu language, specifally in German. Its not a total deal breaker for me, but it would be awesome to have spell check and auto complete in German since I have to type so much in German.
    It hasn't been a problem for me since the last phone I got from AT&T has just been sitting in a desk drawer and I've been using the unlocked phone that I brought over from Germany, but I would really like to be able to use my upgrade this time.

    if you are in the us then you would have to send your phone into the nokia care and request this service specifically, for them to install a language pack with the language you require. you will have to pay shipping and handling and any fee that the install would cost. also if you update your phone with another firmware or have to reformat your phone you will lose the language pack again. as it is not a part of the firmware itself. if you update then your phone will return to the default language pack that came with the phone. 
    Message Edited by radical24 on 31-Jan-2009 11:01 AM
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • Subtract calculation in an expanding table?

    Hi
    I am currently designing a form in Livecycle ES2 and am in need of calculation script.
    I have an expanding table with add rows on it.
    In the table i have a drop down list with 2 items that be can selected DR and CR, an Amount field and a total field.
    Currently the Amount field and a totals field adds up correctly with this script Sum(Spersonaldetails2.Table1.Item[*].Amount)
    However i now need the Totals field to calculate based on which item from the drop down is selected.
    So if DR is selected i need it to add to the total and if CR is selected i need to subtract from the total.
    One row could be a DR and the next row a CR.
    I am unable to have the totals field subtract the Amount if CR is selected.
    look forward to any help.  i have been wrecking my brain over this.

    Hi,
    A sumif equivalent in FormCalc could look like;
    var totalRows = LoanProposal.Table1._Item.count
    var groupTotal = 0
    var list = ref(LoanProposal.Table1.resolveNodes("Item.[ItemName == ""Lodging""]"))
    for i=0 upto list.length - 1 step 1 do
        groupTotal = groupTotal + list.item(i).Total
    endfor
    Note the totalRows variable is not used but is required so the calculate event knows to fire when a row is added or removed.
    This would have to be repeated for each category so you might want to have a calculate event code at a higher level (like the LoanProposal subform) with some JavaScript code like;
    // Reset all fields
    xfa.host.resetData([Mileage.somExpression, Lodging.somExpression].join(","));
    var rows = Table1.resolveNodes("Item[*]");
    for (var i = 0; i < Table1._Item.count ; i++)
        var row = rows.item(i);
        switch (row.ItemName.rawValue)
            case "Mileage":
          Mileage.rawValue += row.Total.rawValue;
                break;
            case "Lodging":
          Lodging.rawValue += row.Total.rawValue;
                break;
    I've only done the first two categories but you can see the pattern
    Regards
    Bruce

  • Help! Can anyone tell me why Bridge CS4 Doesn't recognize my Windows 7 libraries folder?

    I'm having this organizational issue with Bridge, well actually its a total deal breaker.
    I can't open my 'libraries' folder, I'm in Windows 7, it shows the folder in my folder in my folders side bar, but the drop down arrow goes down with nothing, and it has said it doesn't find any subfolders when they are actually there... WTH?
    Any experience and insight would be greatly appreciated!
    Thanks,
    G

    I had a similar problem - I assume it is becuase I created a link in the Photo Library to a folder elsewhere on the C: Drive.  Bridge only shows the actual files that reside in that folder and via not any shortcuts.

  • 12" 13" or 14" notebooks that can run CS5.5 half decently?

    Hello,
    I am buying a new laptop with the intention of doing some HD video editing. When seated at my desk I will use an external HD monitor, but I am looking for a fairly compact laptop so I can remain portable.
    Are there any models that are reccomended? Seems most 13" are without discrete graphics. If I was to have a dual core i7, what does this lack of discrete graphics mean in real terms? For example if I was editing HD AVCHD what sort of extra delays would I experience? Would the interface be unusable? Or just slower? By 20%? 50% 200%?
    I would prefer a 13" machine and have even been looking at the Lenevo x220 12.5" machine. If I get a 14" machine there tends to be more potential for discrete graphics - but since I'm not doing CS5 stuff day-in-day-out it isn't the only determiner of my purchase. Whatever I buy, it would be with a SSD.
    Any specific recomendations for 13 or 14" machines most appreciated.
    Thanks

    Thanks for the replies!
    What minimum CPU would you advise for running CS5.5?
    As far as screen size goes - any laptop that I look to get would be capable of displaying 1920x1080 on an external monitor. Likely 95% of any CS5 work that I do would be using an external monitor so I am far less bothered about the screen resolution of the laptop itself. While I'd like at least 900 vertical pixels on a 13/14 inch machine (there are a few!) its not a total deal breaker for me because of the external monitor.
    I was thinking about these all with an ssd:
    Lenovo x220 - Intel Core i7-2640M Processor (2.8GHz, 4MB L3, 1333MHz FSB), 8gb ram, intel 3000 integrated graphics, 12.5"
    Dell e6320 or e6420 (13/14" respectively - Same processor, or a quad i7 is available for the 14", 8gb ram, integrated graphics or discrete option on the 14" of NVIDIA NVS 4200M
    How is that Nvidia NVS 4200M for CS5.5? Is anyone able to give some time based example difference in performance between the 4200m and the non-discrete intel integrated 3000 graphics?
    I'm guess my current position is that I will not be buying a 15" or larger laptop at the current time - so while the smaller ones might not be perfect, I'd rather buy something that will let me do the odd bit or work when needed (albeit more slowly than I'd like). Perhaps I should be more accuratley looking for the 'least bad' 12-14" machines
    Thanks!

  • New T430s with a series of issues

    My T430s just arrived two days ago with very few of the drivers installed, more prominently the touchpad and track point drivers, which I was able to easily resolve but such careless production was not something that I expected from Lenovo. However, it has now become apparent that three significant manufacturing issues must also be dealt with that are beyond my control:
    1- Very, very limited battery life: Clocks 2h 58min a few minutes after fully charged with hardly anything running in the background (only chrome window and typical windows background processes). I find this very unreasonable and infuriating.
    2- CPU process running at near full capacity coupled with fan noise: After pressing Ctrl + Alt + Delete it is indicated that my CPU is consistently operating between 80-90% capacity with basically nothing running. Furthermore, I believe that this deficiency is responsible for the noticable fan noise being emitted from the laptop although I am not certain. 
    3- Supposedly limited physical memory: Again, after reaching Task Manager I am also notified that I have used up 45% of Physical Memory when I have 401 GB of 450 GB free on my C Drive,
    I am very concerned about these problems and I would like to know how to seamlessly get them resolved. Beyond these issues, my T430s is a phenomenal laptop, but these issues are a total deal breaker. 
    Thank you very much. 

    What OS are you using?  Sounds like Win 7.  That should be good for you since Lenovo's Power Manager is only available for WIin 7,
    In your last post, the hyperlink points toward the battery thread that did not really describe the real problem with the panasonic battery.  The panasonic battery was not very stable and would cause unexpected hard crashes with 35-40% power remaining.  Obviously, continued hard crashes is not good for any OS.
    If you are using Win 7, Lenovo's latest Power Manager will automatically switch between two modes.  One is for battery life.and sets the capacity closer to 38wh.  The other is for battery performance and sets the capacity closer to 44wh.
    Look at the task manager under the processes tab.  Set the sort by CPU% the in real time.  You should be able to isolate the abnormal processes that use the most CPU utilization.when the total spikes up to 95%.
    Also, you should check your device manager to see if any devices have a yellow or red warning,  This would indicate either a faulty hardware component or corrupt driver.
    Lastly, I get about 6-7 hours of battery life with the six cell battery.  See my post on maximizing battery life for the T430S

Maybe you are looking for