Tracing OSA data automatically when thermocouple reading stabilized

Hello,
I am working on a temperature application. I have two parallely working VIs. One is for tracing data from an Optical Spectrum analyzer and the other is for monitoring thermocouple reading. I combined these two and made a VI that records the Optical Spectrum Analyzer data when the thermocouple reading stabilized.
The problem is the code requires user feedback. I mean the VI ask the user whether to trace the data or not. I want the process to be automated completely so that I can leave the set up overnight. I want computer to record the OSA data everytime to a different column of .csv file. And since the wavelength column will always be the same, the computer can only record the power data.
Thanks
Attachments:
code.zip ‏146 KB

By saying user input, I mean specifying the location of file. In the code 3650.VI, when temperature condition is met, a dialog appears and asks me whether or not to trace the data in a trace.csv file and asks for a file location. I want a stationary file and write all the OSA data,only power column, to be written into that file.Every time to a different column,of course.
Attachments:
trace.JPG ‏248 KB
write trace to file.JPG ‏85 KB

Similar Messages

In AP invoice i need to make "Terms date " field to calculate the date automatically when i select the payment terms

In AP invoice i need to make "Terms date " field to calculate the date automatically when i select the payment terms.
How can i do this?

Hi,
You can select the Payment Term at PO Header Level.
When you book an invoice, that Payment Term will automatically defaulted to Invoice.
You can define Payment Term in AP.
Payment terms have one or more payment terms lines, each of which creates one scheduled payment. Each payment terms line and each corresponding scheduled payment has a due date or a discount date based on either a specific day of a month, such as the 15th of the month, or a number of days added to your terms date, such as 14 days after the terms date.
Payment Terms (Oracle Payables Help)

How to get pricing date automatically when billing

Does anybody know where can I set, to get pricing date automatically when billing? (BTY must by the Sales order type)?
Thanks you guy.

Hi check in t-code VOV8 and enter sales order document type you can see pricing date setting as well as you can change manually pricing date while billing creation of billing VF01.
Hope this will help you.
Best Regards
Sainath

Add Date automatically when Signature Field is signed

I was looking for a way to use Java Script in my Adobe Designer form. I want it to complete the Date field automatically with the current date when the signature field is signed. I was thinking something like, when if SignatureBox = True, then DateField...
Am I even close? I'm a bit rusty on my Java Script.
Any suggestions?
Thank you,
Chris

And that is why many responders use only the custom JavaScript calculation option.
The UI for the select fields and simplified field nations are only a way to pass field names to a JavaScript function that performs the actual calculation. Sometimes these functions call other functions and pass the parameters can lead to errors in the attempted code.
I would start to learn code JavaScript for Acrobat.
The pick field dialog is for performing calculations involving sums, products, averages, minimum, and maximum. I am not sure how that would work with a digital signature. Once a signature is applied the form fields could be locked.

Again : Changing Delivery Date automaticly when CARDCODE is validated...

Strugging again.
Nothing I'm trying seems to work.
With this : It never gets in
if (pVal.EventType == BoEventTypes.et_VALIDATE && pVal.ItemUID == FortSum.SAPFramework.Enums.SO_FIELDS.B1_CARDCODE && pVal.ItemChanged == true && pVal.ActionSuccess == true && BubbleEvent)
If I remove ItemChanged and ActionSuccess, it gets in but chaning the delivery date makes SAP
crazy again running around like a DOG running after his tale
Why is it so hard and different each time we're trying to figure out the right combination so we can do things ?
So how can I change the DeliveryDate when the CARDCODE changed ?
I'm still working on it, I always work hard every single time and it's time consuming

Hi,
Thank you for your help.
Yes this works but each time I lost focus of this control it gets in again.
I need something that will be triggered once and only if I change the value of the control.
I still don't know how. Sometimes ItemChanged works and sometimes not and this behaviour I don't really understand.

How to filter the Dimension data automatically when data source is ESSBASE?

Hi Experts,
Since the datasource is ESSBASE,when I only drag the Dimension column for displaying, it will show any redundance value,and it will not be related with Fact Table.
I try to edit the formual as below, it does not work.However, the datasource is relation DB, it will be OK. Why? Are there any missing steps?
Whether it need the MDX , Thanks.
Case when 1=0 then cast(Sales as char) else Year end
OR
Case when 1=0 then Country else Year end
For example,
Year
1999
2000
2001
2013
2014
2015
...

Yes right,
AFAIK there isn't a filter feature for Event Hub. The only way to have now is to put a specific property inside your EventData that consumer group can check to filter if it is interested in the data or not.
Paolo.
Paolo Patierno

PO Workflow: PO needs to approved automatically when need-by-date changed

Hello All,
Please help me in suggesting ideas on below requirement.
Requirement: PO needs to be approved automatically when ever Need-By-Date/Promised-Date changed by buyer.
Currently it is going and checking for the buyer approval limit and keeping the PO in 'Requires_Re_approval' status.
Please suggest me on this.
Thanks/ReddyS

Hello Team,
Please give us some suggestions/ideas on how to proceed furthur.
Thanks/

HT201263 I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. I tried to charge and not charging. What I should do now?

I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. iPhone alerming low charge and I tried to charge and not charging.
What I should do now?

Something has gone wrong. Turn your phone off, then force it into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new".

Automatically opening Acrobat reader when PDF form is downloaded

Hello.
Hope we are all well.
I am wondering if there was a way to have the PDF form open up automatically in Acrobat Reader when the customer downloads it. Unfortunately I am dealing with people who aren't that internet savvy and usually impatient about it (they are tradies, mainly plasterers), so when they download the PDF form and try to open it, the web browser will try to open the PDF in another page making the "submit" button to stop working. Is there any tricks to bypass the browser from doing this so I can have it opened directly by acrobat reader if it is already installed on their pc? Cheers.

That's a shame. I have put a description on the page explaining (with a link) they will have to open in Acrobat for the submit button to work. I was hoping there might be a script to stop the browser trying to open the PDF form instead of Acrobat. Thanks for your reply .

Photomerge interactive is no longer available in 12. I wasted 4 hours trying to find the option. Then read in a forum that the feature had been discontinued. Interactive is the primary reason that I keep the product up-to-date. When will the feature b

Photomerge interactive is no longer available in 12. I wasted 4 hours trying to find the option. Then read in a forum that the feature had been discontinued. Interactive is the primary reason that I keep the product up-to-date. When will the feature be returned?

No one knows if the interactive dialog will return, except adobe and adobe is not saying.
What operating system are you using?
On windows there is a way to get it back, but not if your using a mac.

Incorrect data type when writing to FPGA Read/Write Control

I have run in to a problem this morning that is causing me substantial headache. I am programming a CompactRIO chassis running in FPGA mode (not using the scan engine) with LabVIEW 2012. I am using the FPGA Read/Write Control function to pass data from the RT Host to the FPGA Target. The data the RT host is sending comes from a Windows host machine (acting as the UI) and is received by the RT Host through a network published variable.
The network published shared variable (shared between the RT and Windows system) is a Type Def cluster containing several elements, one of which is a Type Def cluster of fixed point numerics. The RT system reads this shared variable and breaks out the individual elements to pass along to various controls on the FPGA code's front panel. The FPGA's front panel contains a type def cluster (the same type def cluster, actually) of fixed point numerics.
The problem comes in the RT code. After I read the shared variable I unbundle the cluster by name, exposing the sub-cluster of fixed point numerics. I then drop an FPGA Read/Write Control on the RT block diagram and wire up the FPGA reference. I left click on the FPGA Read/Write Control and select the cluster of fixed point numerics. I wire these together and get a coercion dot. Being a coercion dot hater, I hover over it the dot and see that the wire data type is correct (type def cluster of fixed point numerics), but the terminal data type is listed as a cluster containing a Boolean, code integer and source string, also known as an error cluster. I delete the wire and check the terminal data type on the Read/Write Control, which is now correctly listed as a type def cluster of fixed point numerics. Rewiring it causes the terminal to revert back to the error cluster. I delete the wire again and right click on the terminal to add a control. Sure enough, a type def cluster of fixed point numerics appears. Right clicking and adding an indicator to the unbundle attached to the network shared variable produces the proper result. So, until they are attached to each other, everything works fine. When I wire these two nodes together, one spontaneously changes to a error cluster.
Any thoughts would be appreciated.

My apologies I never got back to responding on this. I regret that now because I got it to work but never posted how. I ran in to the exact same problem today and returned to this post to read the fix. It wasn't there, so I had to go through it all over again.
The manifestation of the problem this time was that I was now reading from the Read/Write FPGA front panel control and writing to a network published shared variable. Both of these (the published shared variable and the front panel control) were based on a strict type defined cluster, just like in the original post. In this instance, it was a completely different cluster in a completely different project, so it was not a one-off thing.
In addition to getting the coercion dot (one instance becoming an error cluster, recall), LabVIEW would completely explode this time around. If I saved the VI after changing type definition (I was adding to the cluster) I would get the following error:
Compile error. Report this problem to N.I. Tech Support. Copy cvt,csrc=0xFF
LabVIEW would then crash hard and shutdown without completing the save. FYI, I'm running LabVIEW 12.0f3 32-bit.
If I would then reopen the RT code, the same crash would occur immediately, ad nauseam. The only way to get the RT code to open was to change the type defined cluster back to the way it was (prior to adding the new element).
I didn't realize it last time around (what originally prompted this post), but I believe I was adding to a type def cluster when this occurred the first time.
So, how did I fix it this time around? By this point I tried many, many different things, so it is possible that something else fixed it. However, I believe that all I had to do was to build the FPGA code that the RT code was referencing. I didn't even have to deploy it or run it... I just had to build it. My guess is that the problem was the FPGA Reference vi (needed to communicate with the FPGA) is configured (in my case) to reference a bit file. When the development FPGA Main.vi ceases to match the bit file, I think that bad things happen. LabVIEW seems to get confused because the FPGA Main.vi development code is up and shows the new changes (and hence has the updated type def), but when you ask the RT code to do something substantial (Open, Save, etc), it refers to the old bit file that has not yet been updated. That is probably why the error getting thrown was a compile error.
I'm going to have to do an additional round of changes, so I will test this theory. Hopefully I will remember to update this post with either a confirmation or a retraction.

I am looking into Buying Retail a New Blackberry Q10. Doing this to avoid having to Give up my old Data Plan. Have read that when you activate a new Phone it forces you to pick a new Plan. Is this True? and How to I avoid this? 20 Year Verizon Client

I am looking into Buying Retail a New Blackberry Q10. Doing this to avoid having to Give up my old Data Plan. Have read that when you activate a new Phone it forces you to pick a new Plan. Is this True? and How to I avoid this? Any other advise in this matter would be greatly appreciated.
20 Year Plus Verizon Client

The only "unlimited" plan I can think of where this would not apply is the old Connect plan for multimedia/basic phones. That unlimited data, on devices such as the LG Voyager, EnvTouch, and other "multimedia" devices is not the same.
If you currently have an individual $29.99 unlimited data plan with a 3G Smartphone, then you can buy a BBQ10 retail and activate it with the same data plan and keep the unlimited.

How do I sink my email so that when I read and delete something on my iPhone it automatically is deleted on my iPad and iMac?

How do I sink my email so that when I read and delete something on my iPhone it is deleted on my other devices (iMac & iPad)? My email is through roadrunner. And how do I set my email to automatically delete messages after a set time frame?

For that to happen you need to have an IMAP email account. Contact Sroadrunner to see if they provide such.

How can I read email from my aol account from my iphone and keep it as uread on my computer at home. It automatically goes to read mail on my computer. On my computer if I want to keep an email to answer later I can mark it "Keep as New".

How can I read my email from my aol account from my iphone and keep it as "unread" on my computer at home? At home I can read an email and if I want to get back to it at a later date I can mark it as "keep as new". I tend to forget it if it goes to "read" mail. Right now, when I read an email from my phone it goes automatically to "read" mail.

On the iPad, using the mail app, there is no way to do what you are asking without tapping the flag icon and marking the item as unread. Have you tried the OWA app for the iPad? It may have that functionality, but I haven't tested it as you need an Office 365 subscription with Exchange support to use the app.

How can you manage data usage when cellular data is off, but you are using WiFi where your WiFi provider charges for data use?

I spend quite a few months each year in Canada where I use a Telus Cellular Hub device which is also my WiFi Router. My iPhone 5 has Cellular Data set to "Off" which insures I won't be charged via my Verizon Wireless Service Provider for charges while in Canada. Trouble is Telus, Rogers and all the Canadian Internet Providers charge for all Data going through their Systems. Again, My Cellular Data on the iPhone 5 is turned off, but I use WiFi for such things as checking the Weather, or FaceBook, or searching the Web.
I believe that things may be happening in the background from various Apps that use quite a lot of Data. It could be that iCloud is part of the issue with things being backed up automatically. It also could be that Apps like AP or other News Apps are sending large amounts of Data in the photos associated with their New Stories, etc. I typically turn off the App Store "Updates" such that they don't automatically load. The FaceBook works now posted videos play when you are just scrolling through the News Feed.
I have been trying to fine an article somewhere which focuses on this specific problem but unfortunately many if not most articles are about folks worried about using Cellular Data while in a WiFi environment when their Cellular Data is turned on.
Does anyone know of a fairly comprehensive article about what settings on which Apps might reduce the Data Usage when Cellular Data is turned "Off" but you are going through a Service Provider who charges for all Data Accessed even when you are using WiFi?

Thanks for your comments, it is clear you understand my plight. The trouble is fully understanding what Apps and App Features are transferring data in the background any time you happen to turn WiFi to on (even if you have had it off most of the day or night). Obviously things like Location Services can constantly be sending and receiving data from my iPhone without any action on my part. Also if you have things like photo backup on the iCloud then each time you take a photo you are sending a copy out. All App Updates if set to Automatic also can add up to quite a bit of Data. Reading the News on AP or scrolling through FB News Feed is actually adding up to a lot of Data. There could be other culprits that I am not even thinking of. I don't want to turn Apps like Find My Phone off or turn iCloud off due to loosing the value of such a program entirely. Again thanks for your quick response.

Tracing OSA data automatically when thermocouple reading stabilized

Similar Messages

Maybe you are looking for