Track automation with EW Quantum Leap Platinum Orchestra PLAY edition...

I have Snow Leopard and Logic Pro 9- I use EW Quantum Leap Platinum Orchestra PLAY edition. I would ask on the EW Quantum Leap site also, but I cannot post for some reason...
In track automation it has the option to change the volume in that specific instrument and MIDI channel, but for some reason, it is picking up the other track automation???
I checked all the MIDI channels and everything seems to be set correctly... any information is appreciated. Thank you for your time.
J-

I have been hitting the credit card recently. Last year I bought a Sony Vaio because I couldn't justify all that money when the new line of MBP's finally came out. Sold it 10 months later - they are meant to be a great build quality? Don't think so!
So, 3 or 4 weeks ago I bought a 13" MBP for browsing and a little mixing with Logic - works nicely - until I start hammering it - but it's good for learning.
Anyway - this new iMac replaced my old 21" 2007 model - wow What a dream!
But you know what I always like, every time I open up one of these boxes? The smell! What is it with Apple? Do they spray something in the box? I think they do!
As for how the migration went - pretty good.
Right now though I still have OS and apps on the 256gb SSD and all the data is now on the 1TB HD. Works so well that I don't know whether there is any point in changing it to be honest. I'm sure I could improve read speed by putting all the logic samples on the SSD but I have over 350gb of them so not sure there's much point!

Similar Messages

I am trying to use East West Quantum Leap Symphonic Orchestra with Garageband '11 and East West isn't showing up on the Audio Unit Modules List. Help?

I am trying to use East West Quantum Leap Symphonic Orchestra with Garageband '11 and East West isn't showing up on the Audio Unit Modules List. Help?

Not sure what to say. Have the free version, installed it and GB found it. Perhaps contact East West support if you have a paid version...

Multi-Timbral track automation with VIRUS TI

Hello, My name is Joao and I bouth one VIRUS TI and I am experiencing one problem related with track automation on Logic 8.
I want to know how can I make independent automation for each track that I had created on Logic. For example, when I create one Multi-timbral track, the first automation goes to all of the other 15 tracks at the same time.
If you need any additional information, do not hesitate to contact me.
Best Regards,
Joao.

Yeah that's a known problem with some 3rd party plugins. Assign the different sounds to different Outputs/Auxes instead, and write your Automation into the Auxes.

Track automation not in sync with playback

As of today any track automation that I manipulate is out of sync with the track by a beat. So if I adjust low frequency cut to jump from 20Hz to 1kHz at measure 64 1 1 1, when I playback it will make that adjustment at measure 63 4 1 1 instead, despite me looking at the line that's jumped from 20Hz to 1kHz on 64 1 1 1. Am I going crazy?
This doesn't happen to any PREVIOUS track automation, but only new track automation. And it's always a beat early compared to what I assign to it. Also, this is not specific to a certain project, but happens to every project. In other words, I can't make any music really past notes and beat assignments.
Does anyone have any idea what this means?
I don't know if this helps, but here's the current configurations on the Automation menu:
Move automation with regions: never
snap offset: -5 ticks
ramp time: 200 ms
'Write' mode changes to: Touch
Write automatino for (everything is checked off except "solo")
Automation Quick Assic: [X] off

Hi,
Have you add plugins like Adaptive limiter and/or phase linear Eq on Master Out 1-2?
If you add plugin that require Delay conpensation on the Master 1-2.
Also the meter will be delayed...... try to add 5 or more instances of Adaptive Limiter on the master after automation is done...
Maybe this should be related with Graphic delay that is not f compensate in logic 8, I'm not sure but when I add Plugins such as UAD for mastering reason I can see very large difference (not in sync with audio monitoring) on Meters viewing and all pre-recorded automation will be not in sync.
But I'm not sure if this issue is related with only certain project... maybe you have plugin that add latency on Aux or Master out in those projects!
check it.
Thanks
G
g

"Move Current Track Automation Data to Region" doesn't work for all

I have been using the 'Move Current Track Automation Data to Region' and while it works fine for some types of automation data like channel volume, pan and some plugin parameters, it doesn't work for all of them.
I haven't done exhaustive research into which parameters work and which don't, but most of the parameters for individual voices within Ultrabeat don't - which is annoying as that is what I was trying to use it for.
Any ideas about this, or workarounds?

OK, well an update on this in case anyone's interested.
With some further experimentation I have discovered that this problem did not exist in Logic 7 - ie you can move current track automation data for individual Ultrabeat voices to the region.
It's also possible to move automation data for individual Ultrabeat voices using 'Move All Track Automation Data to Region,' so I suppose this is a kind of workaround, though it can be annoying if you don't want to move all track automation data.
I'm now assuming this is a bug in Logic 8; is there any way to convert a Logic 8 project to work in Logic 7, as this along with the touch tracks bug is making working in Logic 8 very frustrating?

Removing plu-ins after usuing track automation

so I have a vocal track automated the volume and some other effects. But at the end of day I don't like it. I understand that you can turn "off" or bypass a plug-in either in the arrange area or in the inspector, but how do you clear everything-- get a clean slate so I can start over from scratch with track automation. Thanks

rnair wrote:
I am trying to install Oracle 11g R2 on my windows 7, 64bit computer. After 42% of installation, it started showing some files are missing. Few of them are:
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application.xml
And the final pop up winow says:
Database configuration Assistant:Info
*"Template General_Purpose.dbc does not exists. Please specify an exixting template for database creation"*
*"[INS-20802] Oracle Database Configuration Assistant failed"*
Details:
Cause:- The plug-in failed in its perform method
Action:- Refer to the logs or contact Oracle Support Services.
Following are the last few lines of the log file. Can anyone please help me to fix this problem?<snip>
the error has nothing to do with DBCA. DBCA was simply the last in a long string of victims.
Go back and read the instructions where you downloaded the install media. They state that the TWO zip files you download must be unzipped into the same directory.

Track Automation

Is it possible to copy and paste track automation segments? For example, my main bass is 1/2 of a bar in lenght and I automated the whole segment, but when I just try to copy and paste it, it does not take the automation changes with it. Any suggestions?

See your track automation settings - you can get Logic to copy automation when you copy/move segments around.
If you really want to copy/paste automation, you need to work in the track automation folder. Open the automation event editor (there's a key command for this), and with that still open, open a new arrange window - this will display the track automation folder, where you can edit automation to your hearts' content.

Moving and Copying/Pasting Track Automation Data

Hello,
I am a fan of using track automation data to control the volume levels on the faders of my Audio Instrument tracks. I am NOT using the track automation assigned to regions, I am using the ones assigned to tracks. If I move a region, however, the automation data (not surprisingly) does not move with the track. What is the easiest way to move automation data on a track? Is there a way to shift all automation data over a specified amount of measures etc?
Furthermore, I would like to copy ALL of the track automation on one track, and move it to another track (and keep the relative distance between all nodes, etc equal). How can I do this?
Thank you very much,
Connor
iMac G5 1.8Ghz 17" (ALS) Mac OS X (10.4.9) 2 GB RAM

I think you need to shift-drag select (rubber band select) the
automation stuff and when it's highlighted, hold option, click hold
drag and what you selected will be copied to the new location you
drag it to. You need to be pretty careful to option click hold
exactly on the automation line, if you miss it won't invoke the copy

Can Track Automation Be Locked to SMPTE Position?

Hello all! My question, for the most part, is in the subject field. Can track automation be locked to smpte position? I just did hours worth of track automation edits, locked all my regions to SMPTE position, then changed the tempo to better fit the underlying music only to find out that my automation didn't follow the locked regions. Bad news!! Does anyone know if there's a solution to this problem?
Thanks in advance!

Sup,
it would never work with the Regions Locked to SMPTE.
Solution: without going thru details, just unlock the regions then do your tempo change.
"Chap"

Recording Effects on top of a track, or tracking automation live?

Is there a way for me to play with the dials and knobs of my plug-ins after I have already recorded a track?
I want to be able to use a pretty cool plug-in that I found that has a great range of filters, sweeps and such, but I've already laid down the track and the automation would be extremely difficult to map out by hand...
Is it possible to track automation live?
Any clues?

Is it possible to track automation live?
Sure several ways of doing this:
Set the Audio track to Automation "Latch" or "Write" Mode - press play - tweak the Plug In with your Mouse - the Automation Engine will record your mouse movements
Assign different Controllers (knobs on your Synth or Control device) to different parameters in the Automation->Quick Access Menue - go into "Latch" or "Write" Mode - press play - record the Controller movements
or really old school "live"
Assign the Audio track to a Bus - use that Bus as an Input for a new Audio track - press record - tweak your Plug In while recording the new Audio track - the Plug In movements will get printed onto the new track together with the original Audio

Automation with logic and kontakt3

what is the secret to having individaul track automation using kontakt3

No secret - either automate the Aux tracks assigned to multiple outs of Kontakt
or
use the assignable automation parameters in Kontakt (in the Auto menue at the upper left) by dragging e.g. #001 to any knob of the instrument you want to control-in the track header select #001 and write your nodes with a controller or with your mouse. I´ll post a picture if you need more help.
Message was edited by: Sampleconstruct

Logic Studio 32 bit and (AU)East West Quantum Leap Goliath 64bit Question

I have a Mac Pro 8 core Zeon Harpertown processor's. Its the latest mac Pro with 10 gigs of ram.
I also have Logic Studio 2 and Logic Express. I just purchased East West Quantum Leap Goliath.
Here is the major Dilema:
Mac OS is 64 bit. East West is 64 bit but Logic is 32 bit.
Won't there be a problem with east west AU being run on 64 bit in a 32 bit application? East West New Engine is 64 bit so its not just the samples its alos the engine.
The only 64 bit audio sequencing software right now is Sonar. I heard it was 64 bit because of its Video module is also 64 bit.
Anyhow how is this going to work running an AU that is 64 bit in a 32 bit application?
Thanks

Are you sure? There would be absolutely no point whatsoever in releasing a Mac 64-bit plugin, as there are no 64-bit hosts on the Mac, and likely won't be for some time. Logic isn't going fully 64-bit anytime soon.
You can't run 64-bit code in a 32-bit host, so why would they release a Mac plugin version if it was essentially unusable..? And how would they test it..?
Edit: I just looked at the press release. It says "32-bit support is also included".

Unable to perform multi audio tracks mixing with Audio Mixer

How do you get a simple multi track mix with the Premier Pro 1.5 Audio Mixer?
I got 2 audio clips, each sitting at the start of its own separate track (Audio 1 and Audio 2). I just want to mix them into the Master track. Simple enough.
So I go to the Audio Mixer. Position the CTI at the start of the tracks and hit the red RECORD button. The red spot starts blinking. Then I hit the START/STOP button expecting the tracks to start mixing into the Master track. Instead, I get this error message
"PLAYER ERROR: You cannot record without enabling at least one track for recording."
I get the same problem if I try the mix onto a submix track.
What am I missing? I combed through the Premiere Pro User Guide and J. Rosenberg's Premiere Pro Studio Techniques but to no avail.
Thanks for any help.
JB.

Jacques, I havn't seen 1.5 for a while, so I need to stress that what I'm about to say is more of an educated guess linked to a rough memory.
Each audio track in the mixer has a small chip (tickbox in 1.5??) that you click in order to enable that track for recording. In CS3 it's a little microphone.
Having said that, I DON'T think that's going to give you what you want, as the intention of the recording functionality in PP is to record audio FROM AN EXTERNAL SOURCE (like a microphone) straight to an audio track, say, when doing a Voice Over for some video.
You can't "mix down" to the master, as the master is not a track per se. It's just a "final" level control. The master will always be the sum of the active tracks, and THAT'S what will be rendered in the final output.
You can still "live mix" your audio with the faders, it's just that those movements get recorded as keyframes on each of the tracks you modify (including, BTW, the Master).
The advantage to this workflow is that every fader move you make is infinitley editable... a small error when riding the faders can easily be fixed by dragging keyframes.
HTH.
Matthew

Magic Track Pad with Lion 10.7 and Safari zoom aA vs Pinch to zoom

Hi,
I enjoy a Mac Mini (early 2009) hooked to a 50 inch plasma and surf from my couch, stream etc... We browse with Safari 5.X and enjoyed the new Magic Track Pad with Snow Leopard. You could zoom / scale Safari with Snow Leopard beautifully, with a pinch out on the trackpad, same function as aA option on the browser task bar.
Now with Lion, the pinch to zoom feature zooms but doesn't scale the safari window the same way aA option used to. In lion a pinch out to zoom in will push a significant part of the browser screen off / out of view.
The aA option on the safari task bar scales the window, and keeps everything visible but larger, but now in Lion it is not available from the Magic Track Pad Gestures. The Button is still there on the browser but there is no option to access it from the track pad with a gesture.
How can I revert to the old way of zooming / Scaling a Safari web page with my Magic track pad in Lion?
Thanks,
H

You can see in that screenshot that a lot of browser.gesture.pinch prefs have an empty string as their value and thus won't have any effect.
You can restore some zoom feature by modifying the values of the related prefs on the about:config page via the right-click context menu.
* browser.gesture.pinch.in -> cmd_fullZoomReduce
* browser.gesture.pinch.in.shift -> cmd_fullZoomReset
* browser.gesture.pinch.out -> cmd_fullZoomEnlarge
* browser.gesture.pinch.out.shift -> cmd_fullZoomReset
You may want to toggle this pref (I don't know what effect this has):
* browser.gesture.pinch.latched -> false
*pinchy: https://addons.mozilla.org/firefox/addon/pinchy/

How do I create multiple midi tracks each with separate external synthesizer sound

Mac Pro OS 10.10.2, Logic Pro 10.1.1, FireFace 800 (updated), Roland XP-30 synthesizer/keyboard, Mackie mixer.
XP-30 analog output to Mackie, FireFace monitor to FireFace main inputs and FireFace out to Mackie.
What I can't get to work: Sound output for monitoring as I record on each of several midi tracks, each with access to my banks/programs.
Logic automatically set up the multi-instrument and created 16 tracks, visible in the mixer window. I have entered custom banks for the XP-30 and they are working.
Mt problem is two parts. First, my last experience was with Logic Pro 7 way back.
Problem two is that when I create midi tracks (except for the first one I created on channel 1) by control-clicking on one of the tracks in the mixer window I get no sound for monitoring. I can see the green monitor indicator for the track shows midi data incoming. I just can't hear it. It's as if there is no designated output. I have checked audio preferences and see the FireFace as input and output device. If i change the channel to channel 1, I get the sound, but then I have two tracks on channel 1 which doesn't work for designating unique sounds to each track.
I can select "All" for channel and get monitored sound on several tracks; however, they then all play the same sound, of course.
i can create midi tracks (either instrument or external) using the plus icon, but no matter how i set them up that way, they do not allow me access to my banks/programs.
In logic Pro 7 it was no problem creating multiple midi tracks, each with a different sound assigned to it. In Logic Pro 10, I am baffled regarding how to accomplish this and get it all to work as simply and nicely as I was able to with #7.
Make sense? Can anyone help?
Thanks

I have it set to Performance mode which according to the owners manual: "This mode makes the XP-30 function as a multitimbral sound
source, and Performance settings can be modified. If you’re
using an external MIDI device to control the XP-30 in this
mode, it will function as a multitimbral sound source."

Track automation with EW Quantum Leap Platinum Orchestra PLAY edition...

Similar Messages

Maybe you are looking for