Tracking mode for RMAN

Hi,
I want to use tracking mode for rman.
I have created my tracking file to store modified blocks.
The first time i run a backup incremental level 0 and after i create a table.
The second backup is an incremental level 1 and all my datafiles are backuped.
I d'ont understand why.
Thanks

How many datafiles do you have ?
If you create a table:
- Oracle writes into the dictionary (SYSTEM tablespace): related datafile is updated
- Oracle writes into the tablespace used by the table: related datafile is updated
- Oracle writes some undo information for the dictionary update in the UNDO tablespace: related datafile is also updated.
And you may have some internal background transactions that could also update the SYSTEM and UNDO tablespaces.

Similar Messages

[Patch 정보] TRACKING BUG FOR CUMULATIVE MLR#6 ON TOP OF BPEL PM 10.1.3.3.1

최근에 출시된 BPEL PM 10.1.3.3.1의 통합패치입니다.
아래는 readme.txt에 포함된 patch list입니다.
# WARNING: Failure to carefully read and understand these requirements may
# result in your applying a patch that can cause your Oracle Server to
# malfunction, including interruption of service and/or loss of data.
# If you do not meet all of the following requirements, please log an
# iTAR, so that an Oracle Support Analyst may review your situation. The
# Oracle analyst will help you determine if this patch is suitable for you
# to apply to your system. We recommend that you avoid applying any
# temporary patch unless directed by an Oracle Support Analyst who has
# reviewed your system and determined that it is applicable.
# Requirements:
# - You must have located this patch via a Bug Database entry
# and have the exact symptoms described in the bug entry.
# - Your system configuration (Oracle Server version and patch
# level, OS Version) must exactly match those in the bug
# database entry - You must have NO OTHER PATCHES installed on
# your Oracle Server since the latest patch set (or base release
# x.y.z if you have no patch sets installed).
# - [Oracle 9.0.4.1 & above] You must have Perl 5.00503 (or later)
# installed under the ORACLE_HOME, or elsewhere within the host
# environment.
# Refer to the following link for details on Perl and OPatch:
# http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=189489.1
# If you do NOT meet these requirements, or are not certain that you meet
# these requirements, please log an iTAR requesting assistance with this
# patch and Support will make a determination about whether you should
# apply this patch.
# 10.1.3.3.1 Bundle Patch 6823628
# DATE: March 14, 2008
# Platform Patch for : Generic
# Product Version # : 10.1.3.3.1
# Product Patched : Oracle(R) SOA
# Bugs Fixed by 10.1.3.3.1 Initial patch 6492514 :
# Bug 5473225 - PATCH01GENESIS HOT UNABLE TO CATCH AN EXCEPTION DURING A
# TRANSFORM
# Bug 5699423 - PARTNERLINK PROPERTY THAT SET BPELXPROPERTY FUNCTION DOESN'T
# WORK
# Bug 5848272 - STATEFUL WEBSERVICES DEMO ON OTN DOES NOT WORK 10.1.3.1
# Bug 5872799 - ANT DEPLOY BPEL TEST FAILS/RUNS ON DEFAULT DOMAIN NOT
# SPECIFIED TARGET DOMAIN
# Bug 5883401 - ALLOW A WAY TO CREATE EMPTY NODES - AND USE FOR REQUIRED
# NODES
# Bug 5919412 - SAMPLE DEMO BPEL PROCESSES MIMESERVICE MIMEREQUESTER AXIS
# JAVA EXAMPLE ERROR
# Bug 5924483 - ESB SHOULD SUPPORT SOAP EDNPOINT LOCATION DYNAMIC UDDI LOOKUP
# Bug 5926809 - ORAPARSEESCAPEDXML XPATH EXPRESSION FAILED TO EXECUTE
# FOTY0001 TYPE ERROR
# Bug 5937320 - STRANGE BEHAVIOUR CALLING FROM BPEL TO BPEL GETTING
# NULLPOINTEREXCEPTION.
# Bug 5944641 - BPA BLUEPRINT NOT AVAIALBLE IN JDEVELOPER
# Bug 5945059 - JAVA.LANG.NULLPOINTEREXCEPTION SENDING EMAILS WITH PAYLOADS
# LARGER THAT 1MB
# Bug 5962677 - WS RESPONSE IS EMPTY SOAP BODY IN ONE-WAY CALL
# Bug 5963425 - WHEN THE OUTCOMES FOR A HT CHANGED & IMPORTED - UPDATE
# CONNECTION ROLES IN BPEL
# Bug 5964097 - AQ ADAPTER DEPLOYMENT CAUSES OPMN TO PERFORM A FORCEFUL
# SHUTDOWN IN SOA
# Bug 5971534 - CANNOT GRANT USER TASK VIEWS TO GROUPS, ONLY TO USERS.
# Bug 5989367 - REFER TO SR 6252219.993 BPEL 10.1.3 ONLY COPIES IN ASSIGN,
# IN 10.1.2 IT CREATES
# Bug 5989527 - ENHANCEMENT WARNING SHOULD BE GIVEN UPON UPLOAD IF BPEL
# PROCESS IS OPEN IN ARIS
# Bug 5997936 - ESB FAULT DOES NOT GET PROPAGATED TO BPEL
# Bug 6000575 - PERF NEED ESB PURGE SCRIPT TO PURGE BY DATE AND PROCESS
# Bug 6001796 - POSTING OF DATE RECEIVED FROM XML GATEWAY TO BPEL FAILED IN
# ESB
# Bug 6005407 - BPEL PROCESS DOESN'T PROPOGATE FAULT THROWN BY BPEL
# SUB-PROCESS
# Bug 6017846 - MIMETYPE OF EMAIL NOTIFICATION IS NOT SET THROUGH HUMAN TASK
# Bug 6027734 - DECISION SERVICE IMPORT - LOCATING DECISION SERVICE IN .DECS
# FILE IMPROPER
# Bug 6028985 - EXCEEDED MAXIMUM NUMBER OF SUBSCRIBERS FOR QUEUE
# ORAESB.ESB_CONTROL
# Bug 6041508 - CREATING/UPDATING DVM CAUSE EXCEPTION
# Bug 6053708 - FTP ADAPTER DOES NOT SUPPORT ENCRYPTED PASSWORD IN
# OC4J-RA.XML
# Bug 6054034 - INDEX4,INDEX5 AND INDEX6 CANNOT BE USED IN BPEL CONSOLE
# Bug 6068801 - BACKPORT OF BPEL ON WEBLOGIC - VERSION 10.1.3.3
# Bug 6070991 - HT EXPORT DOES NOT EXPORT PARAMETERS, ALLOW PARTICIPANTS TO
# INVITE OTHERS
# Bug 6071001 - WSIF HTTP BINDING NOT WORKING FROM ESB
# Bug 6073311 - STRESS SCOPE NOT FOUND ON CALLBACK - WRONG (DUPE)
# SUBSCRIPTION IN TABLE
# Bug 6081070 - JMS ADAPTER REJECTION HANDLER CREATE 0 BYTE FILES
# Bug 6083419 - DECISION SERVICE SCOPE NEED TO HAVE A SPECIAL INDICATOR
# Bug 6085799 - HUMAN TASK ADDED IN SCOPE IN JDEV IS NOT UPDATED TO BPA
# SERVER
# Bug 6085933 - EXPORT AND EXPLORE SHOULD USE USER LANGUAGE AND NOT ENGLISH
# ALWAYS
# Bug 6086281 - STRING INDEX OUT OF RANGE ERROR FOR COBOL COPYBOOK WITH PIC
# CLAUSE HAVING S
# Bug 6086453 - DOMAINS CREATED IN A CLUSTER GETS NOT PROPAGATED TO NEW OR
# EXISTING NODES
# Bug 6087484 - MULTIPLE HEADER SETTING CAUSES ESB EXCEPTION
# Bug 6087645 - ESB SHOULD ALLOW USER PICK RUNTIME PROTOCOL (HTTP/HTTPS)
# Bug 6110231 - TRANSLATION NOT BASED ON MQ CCSID CHARSET
# Bug 6120226 - BPEL IS NOT SETTING THE APPS CONTEXT CORRECTLY
# Bug 6120323 - COMPLETIONPERSISTPOLICY ON DOMAIN LEVEL HAS DISAPPEARED
# Bug 6125184 - ESB JMS SESSION ROLLBACK ORACLE.JMS.AQJMSEXCEPTION
# Bug 6127824 - [AIA2.0] CURRENT XREF IMPLEMENTATION IS MISSING REQUIRED
# INDEXES ON XREF SCHEMA
# Bug 6128247 - HTTPCONNECTOR POST() METHOD SHOULD RAISE EXCEPTION FOR ALL
# STATUS CODES EXCEPT 2
# Bug 6131159 - ENABLE USERS TO CHOOSE XSD WHEN CREATING A BPEL PROCESS FROM
# BLUE PRINT
# Bug 6132141 - PROCESS_DEFAULT TABLE STILL CONTAINS INFORMATION FROM
# UNDEPLOYED PROCESSES
# Bug 6133190 - ENABLING ESB CONSOLE HTTP/S IS MAKING THE CONSOLE TO COME UP
# BLANK.
# Bug 6139681 - BPEL WSDL LINK IN CLUSTERED RUNTIME POINTS TO A SINGLE NODE
# Bug 6141259 - BASICHEADERS NOT PUTTING WWW-AUTHENTICATE HEADERS FOR HTTP
# BINDING IN BPEL
# Bug 6148021 - BPEL NATIVE SCHEMA FOR COBOL COPYBOOK WITH IMPLIED DECIMAL
# LOSES DIGIT IN OUTPUT
# Bug 6149672 - XOR DATA - CONDITION EXPRESSION SPECIFICATION IS NOT
# INTUITIVE IN BPMN MODELS
# Bug 6152830 - LOSING CONDITIONAL EXPRESSIONS CREATED IN JDEV UPON MERGE
# Bug 6158128 - BASICHEADERS NOT PUTTING WWW-AUTHENTICATE HEADERS FOR HTTP
# BINDING
# Bug 6166991 - WHEN STARTING SOA SUITE,, PROCESSES FAIL DUE TO UNDEFINED
# WSDL
# Bug 6168226 - LOCATION-RESOLVER EXCEPTION THROWN IN OPMN LOGS
# Bug 6187883 - CHANGES FOR BPEL RELEASE ON JBOSS- VERSION 10.1.3.3
# Bug 6206148 - [AIA2.0] NEW FUNCTION REQUEST, XREFLOOKUPPOPULATEDCOLUMNS()
# Bug 6210481 - BPEL PROCESS WORKS INCORRECTLY WHEN AN ACTIVITY HAS MULTIPLE
# TRANSITIONCONDITION
# Bug 6240028 - WEBSERVICE THAT DOES NOT CHALLENGE FOR BASIC CREDENTIALS
# CANNOT BE INVOKED
# Bug 6257116 - MULTIPLE HEADER SETTING CAUSES ESB EXCEPTION
# Bug 6258925 - MESSAGE RECEIVED BY THE TARGET ENDPOINT VIA HTTP POST IS
# MISSING THE XML HEADER
# Bug 6259686 - TOO MANY UNNECESSARY WORKFLOW E-MAIL NOTIFICATIONS GENERATED
# Bug 6267726 - 10.1.3.3 ORACLE APPLICATIONS ADAPTER - NOT ABLE TO CAPTURE
# BUSINESS EVENT
# Bug 6272427 - WEBSPHERE BPEL FAILS FOR DATA RETRIEVAL OF SIZE 500+ KB
# Bug 6276995 - MERGE SCOPE NAME IS NOT UPDATED WHEN CHANGED IN THE SERVER
# Bug 6280570 - XPATH EXPRESSION ERROR IN MEDIATOR FOR ASSIGNING USER-DEFINED
# CONTEXT VALUES
# Bug 6282339 - RETRYCOUNT DOES NOT WORK PROPERLY
# Bug 6311039 - ONE RECORD IS INSERTED TO SYNC_STORE IF
# COMPLETIONPERSISTPOLICY SET TO FAULTED
# Bug 6311809 - [AIA2.0] NON-RETRYABLE ERRORS ARE NOT POSTED ON ESB_ERROR
# TOPIC
# Bug 6314784 - THE PRIORITY DEFINED IN THE BPA SUITE IS NOT TRANSFERRED TO
# THE JDEV CORRECTLY
# Bug 6314982 - THREADPOOL RACE CONDITION IN ADAPTER INITIALIZATION MESSAGES
# NOT PROCESSED
# Bug 6315104 - (SET)CLASSNAME MISSING IN TSENSOR JAXB OBJECTS
# Bug 6316554 - CONSUME FUNCTIONALITY OF JMS ADAPTER FOR BEA WEBLOGIC DOES
# NOT WORK
# Bug 6316950 - FILEADAPTER HARPER ENHANCEMENTS SYNC WRITE AND CHUNKED
# INTERACTION SPEC
# Bug 6317398 - THE ICON FOR COMPUTING DIFFERENCE IS MISSING IN JDEV REFRESH
# FROM SERVER DIALOG
# Bug 6320506 - IMPORT FAILS WHEN THERE IS AN UNNAMED CASE
# Bug 6321011 - CANNOT PROCESS 0 BYTE FILE USING FTP ADAPTER
# Bug 6325749 - TRACKING BUG FOR TRACKING ADDITIONAL CHANGES TO BUG #6032044
# Bug 6328584 - NEED A NEW XPATH EXPRESSION TO GET ATTACHMENT CONTENT VIA
# SOAP INVOKATION
# Bug 6333788 - COLLAPSING OF CONSECUTIVE ASSIGN TASKS BREAKS BAM SENSOR
# Bug 6335773 - BUILD.XML CONTAINS DO NOT EDIT .. - WHILE <CUSTOMIZE> TASK
# MUST BE IN <BPELC>
# Bug 6335805 - AQ ADAPTER OUTBOUND DOESN'T RECONNECT AFTER FAILURE
# Bug 6335822 - [AIA2.0] PSRPERFESB - RUNTIME DVM PERFORMANCE OVERHEAD IN ABS
# USE CASE
# Bug 6339126 - CHECKPOINT BPEL JAVA METHOD DOESN'T WORK IN BPEL 10.1.3.3
# Bug 6342899 - OUTLINECHANGE.XML NOT UPDATE WITH ACTIVITY FROM NEW BRANCH
# Bug 6343299 - ESB CONCRETE WSDL NAMESPACE SHOULD BE DIFFERENT FROM IMPORTED
# WSDL NAMESPACE
# Bug 6372741 - DEHYDRATION DATABASE KEEPS GROWING IN 10.1.3.3
# Bug 6401295 - NXSD SHOULD SUPPORT ESCAPING THE TERMINATED/QUOTED/SURROUNDED
# DELIMITERS
# Bug 6458691 - DIST DIRECTORY FOR 10.1.3.3.1 NEEDS UPDATE
# Bug 6461516 - BPEL CONSOLE CHANGES FOR DISPLAYING RELEASE 10.1.3.3.1
# Bug 6470742 - CHANGE THE VERSION NUMBER AND BUILD INFO IN ABOUT DIALOG IN
# ESB
# BUG ADDED IN MLR#1, 6671813 :
# Bug 6494921 - ORABPEL-02154 IF LONG DOMAIN AND SUITECASE NAMES IN USE
# BUGS ADDED IN MLR#2, 6671831 :
# Bug 6456519 - ERROR IN BPEL CONSOLE THREADS TAB:SERVLETEXCEPTION CANNOT GET
# DISPATCHER TRACE
# Bug 6354719 - WHICH JGROUP CONFIGURATION PARAMETER IMPACTS BPEL CLUSTER
# ACTIVITY
# Bug 6216169 - SCOPE NOT FOUND ERROR WHILE DELIVERING EXPIRATION MESSAGE OF
# ONALARM
# Bug 6395060 - ORA-01704 ON INSERTING A FAULTED INVOKE ACTIVITY_SENSOR
# Bug 6501312 - DEHYDRATION DATABASE KEEPS GROWING IN 10.1.3.3 #2
# Bug 6601020 - SEARCHBASE WHICH INCLUDES PARENTHESIS IN THE NAMES DOES NOT
# WORK
# Bug 6182023 - WAIT ACTIVITY FAILS TO CONTINUE IN CLUSTER WHEN PROCESSING
# NODE GOES DOWN
# BUGS ADDED IN MLR#3, 6723162 :
# Bug 6725374 - INSTANCE NOT FOUND IN DATASOURCE
# Bug 4964824 - TIMED OUT IF SET CORRELATIONSET INITIATE YES IN REPLY
# ACTIVITY
# Bug 6443218 - [AIA2.0]BPEL PROCESS THAT REPLIES A CAUGHT FAULT AND THEN
# RETHROWS IT IS STUCK
# Bug 6235180 - BPPEL XPATH FUNCTION XP20 CURRENT-DATETIME() IS RETURNING AN
# INCORRET TIME
# Bug 6011665 - BPEL RESTART CAUSES ORABPEL-08003 FAILED TO READ WSDL
# Bug 6731179 - INCREASED REQUESTS CAUSE OUTOFMEMORY ERRORS IN OC4J_SOA WHICH
# REQUIRES A RESTART
# Bug 6745591 - SYNC PROCESS <REPLY> FOLLOWED BY <THROW> CASE CAUSING
# OUTOFMEMORY ERRORS
# Bug 6396308 - UNABLE TO SEARCH FOR HUMAN TASK THAT INCLUDES TASK HISTORY
# FROM PREVIOUS TASK
# Bug 6455812 - DIRECT INVOCATION FROM ESB ROUTING SERVICE FAILS WHEN CALLED
# BPEL PROCESS
# Bug 6273370 - ESBLISTENERIMPL.ONFATALERROR GENERATING NPE ON CUSTOM ADAPTER
# Bug 6030243 - WORKFLOW NOTIFICATIONS FAILING WITHOUT BPELADMIN USER
# Bug 6473280 - INVOKING A .NET 3.0 SOAP SERVICE EXPOSED BY A ESB ENDPOINT
# GIVES A NPE
# BUGS ADDED IN MLR#4, 6748706 :
# Bug 6336442 - RESETTING ESB REPOSITORY DOES NOT CLEAR DB SLIDE REPOSITORY
# Bug 6316613 - MIDPROCESS ACTIVATION AGENT DOES NOT ACTIVATED FOR RETIRED
# BPEL PROCESS
# Bug 6368420 - SYSTEM IS NOT ASSIGNING TASK FOR REAPPROVAL AFTER REQUEST
# MORE INFO SUBMITTED
# Bug 6133670 - JDEV: UNABLE TO CREATE AN INTEGRATION SERVER CONNETION WHEN
# ESB IS ON HTTPS
# Bug 6681055 - TEXT ATTACHMENT CONTENT IS CORRUPTED
# Bug 6638648 - REQUEST HEADERS ARE NOT PASSED THROUGH TO THE OUTBOUND HEADER
# Bug 5521385 - [HA]PATCH01:ESB WILL LOSE TRACKING DATA WHEN JMS PROVIDER IS
# DOWN
# Bug 6759068 - WORKLIST APPLICATION PERFORMANCE DEGRADATION W/ SSL ENABLED
# FOR BPEL TO OVD
# BUGS ADDED IN MLR#5, 6782254 :
# Bug 6502310 - AUTOMATED RETRY ON FAILED INVOKE WITH CORRELATIONSET INIT
# FAILS
# Bug 6454795 - FAULT POLICY CHANGE NEEDS RESTART OF BPEL SERVER
# Bug 6732064 - FAILED TO READ WSDL ERROR ON THE CALLBACK ON RESTARTING BPEL
# OC4J CONTAINER
# Bug 6694313 - ZERO BYTE FILE WHEN REJECTEDMESSAGEHANDLERS FAILS
# Bug 6686528 - LINK IN APPLICATION.XML FILES CHANGED TO HARD LINKS WHEN MORE
# THAN 1 HT PRESENT
# Bug 6083024 - TEXT AND HTML DOC THAT RECEIVED AS ATTACHMENTS WERE EITHER
# BLANK OR GARBLED
# Bug 6638648 - REQUEST HEADERS ARE NOT PASSED THROUGH TO THE OUTBOUND HEADER
# Bug 6267726 - 10.1.3.3 ORACLE APPLICATIONS ADAPTER - NOT ABLE TO CAPTURE
# BUSINESS EVENT
# Bug 6774981 - NON-RETRYABLE ERRORS ARE NOT POSTED ON ESB_ERROR TOPIC
# Bug 6789177 - SFTP ADAPTER DOES NOT SUPPORT RENAMING FILES
# Bug 6809593 - BPEL UPGRADE TO 10.1.3.3.1 WITH ESB CALLS FAILS DUE TO
# CACHING OF PLNK - SERVICE
# BUGS ADDED IN MLR#6, 6823628 :
# Bug 6412909 - <BPELX:RENAME> DOES NOT ADD XMLNS DECLARATION AUTOMATICALLY
# Bug 6753116 - OUTPUT FROM HUMAN TASK IS NOT IS NOT CONSISTENT WITH
# SCHEMA
# ORDERING
# Bug 6832205 - BAD VERIFICATIONSERVICE PERFORMANCE IF LDAP SERVICE HAS HUGE
# DATA
# Bug 6189268 - CALLING BPEL PROCESS VIA SOAP FROM ESB FAILS WITH
# NAMENOTFOUNDEXCEPTION
# Bug 6834402 - JMS ADAPTER IMPROPERLY CASTS XAQUEUESESSION TO QUEUESESSION
# Bug 6073117 - TASK SERVICE DOESN'T RENDER THE TASK ACTIONS
# Bug 6054263 - REUSING SOAP WSDL IN RS CAUSES SOAP ACTION'S NS TO BE
# STRIPPED
# AWAY
# Bug 6489703 - ESB: NUMBER OF LISTENERS > 1 GIVES JMS EXCEPTION UNDER STRESS
# Bug 5679542 - FTP ADAPTER: COULD NOT PARSE TIME:
# JAVA.LANG.STRINGINDEXOUTOFBOUNDSEXCEPTION
# Bug 6770198 - AQ ACTIVATIONINSTANCES >1 DOESN'T WORK IN ESB
# Bug 6798779 - ESB ROUTING RULES CORRUPTED ON RE-REGISTERING WITH ROUTING
# ORDER
# IN WSDL CHANGED
# Bug 6617974 - BACKPORT REQUEST FOR MOVING FILES FUNCTION OF FTP ADAPTER
# Bug 6705707 - VALIDATION ON ESB CAN'T HANDLE NESTED SCHEMAS
# Bug 6414848 - FTP ADAPTER ARCHIVE FILENAME FOR BPEL IS BEING SCRAMBLED
# AFTER
# THE 10.1.3.3 UPGR
# Bug 5990764 - INFORMATION ARE LOST WHEN BPEL PROCESS IS POLLING FOR MAILS
# WITH
# ATTACHEMENTS
# Bug 6802070 - ORA-12899 SUBSCRIBER_ID/RES_SUBSCRIBER COLUMN SMALL FOR LONG
# DOMAIN AND PROCESS
# Bug 6753524 - WRONG SERVICE ENDPOINT OPEN WHEN TEST WEB SERVICE OF ESB
# Bug 6086434 - PROBLEM IN BPEL FILE ADAPTER WHILE READING A FIXED LENGTH
# FILE
# Bug 6823374 - BPEL 10.1.3.3.1 BAM SENSOR ACTION FAILS WITH BAM 11
# Bug 6819677 - HTTS STATUS 202 RETURNED INSTEAD OF SOAP FAULT
# Bug 6853301 - MQ ADAPTER REJECTED MESSAGES IS NOT REMOVED FROM THE RECOVERY
# QUEUE
# Bug 6847200 - 10.1.3.3.1 PATCH (#6748706) HAS STOPPED FTP ADAPTER POLLING
# IN
# SFTP MODE
# Bug 6895795 - AQ OUTBOUND DOESN'T WORK WITH MLR#6
업무에 참고하시기 바랍니다.

David,
You are right, theer are some changes incorporated in the latest MLR # 16 on the configurations files and on the dehydration store metrics(such as performance, fields,..).
However, I would not suggest to continue working on olite, even for Development/Test purposes as you might get stuck with strange errors...and the only solution would be to re-install SOA Suite if your olite gets corrupted. There might be ways to gets your olite back to position, but trust me..its not so simple.
Also, when you develop and stress test all your testcase scenarios in an TEST Adv installation, its simple to mimic the same in actual production box, as you exactly know its behavior.
So, go for a brand new SOA 10.1.3.4 MLR # 5 (or) 10.1.3.3.1 MLR # 16 SOA Suite Advanced installation with Oracle DB 10.2.0.3 as its dehydration store.
Hope this helps!
Cheers
Anirudh Pucha

After using apogee duet, mac's built in mic & logic's track headers for recording are not working properly. How do I fix it?

I use logic 9
After using apogee duet for mac, I was away from my home studio without the duet and wanted to record vocals via the internal microphone on my mac book pro. (Obviously, I know it wouldn’t be the same quality. I wanted to do it as a draft, because I had a melody in my head and wanted to record it so I could remember it later.)
After opening up a project I was unable to record audio. I noticed the track headers had changed. Sometimes the “record ready” button was missing. But whether it was there or wasn’t, the same thing kept happening… After pressing the “record button” or the “record ready” button a window would pop up that said, “No input source selected!” I tried to trouble shoot by configuring track header and by going to prefereces>audio>devices>core audio, and switched the “input device” to “built in microphone,” and things like that, but I still would get the same pop up window indicating “no input source selected.” To be thorough, in preferences under “core audio,” I have selected universal track mode, 24 bit recording, and software monitoring.
Do I need to reset something?
If your recommendations help fix the immediate issue temporarily, how do I keep it from reverting back to the same problem if I feel like switching between the duet interface and the built in mic in the future? How do I keep it permanently from this malfunction? It seems like this is something simple that would be addressed.
Also, as I was trying to think of anything it could possibly be. I wonder if it could be the driver I installed for an old m-box2 possibly causing an issue. After getting my new mac book pro, I downloaded a driver for m-box2 (the second generation that came out in 2005 and used pro tools LE.) I used the m-box on my previous computer and it worked well. Since I purchased a new macbook, I tried to use it on my new computer, but since the m-box2 is a 32 bit system, it didn’t work very well, which is why I got the duet. I don’t know if that could possibly be messing anything up. If so, should I uninstall it somehow?
Thanks

Ok, think this through... you've changed from a stereo source to a mono source.
The message reads: “No input source selected!”
On the track you're trying to record there is an Input section directly underneath the I/O label. Click and hold to select the correct Input for that track.
Also, the project you opened was saved with the Duet's driver/interface parameters.. if you open the same project without the audio interface Logic will do it's best to pick I/O that's compatible but I've never seen any DAW do this perfectly.. it always takes a small amount of user input. Especially since you've changed from the Apogee to the internal mic.

How to get Motion Tracking Mode to work?

How do I get "Motion Tracking Mode" to work? I click the icon and nothing happens, its like greyed out.

scouterbsa
Here is my check list for you to review regarding using Motion Tracking Mode in Premiere Elements 10 on Windows 7 64 bit.
1. You need a video and with enough motion in the object in it to track it. Color contrast between the object and its background can be important to success.
I created a DV AVI 4:3 in which I have a circle moving, and I have used a butterfly Clip Art from Premiere Elements 10 to track to track the circle as it moves in the video. In this example, you see the object only at 0 time.
2. Select/highlight the clip on the Timeline. And then click on the Motion Tracking Mode icon above the Timeline.
You should next see the following Motion Tracking dialog asking for a Yes or No to the question "Run
Auto-Analyzer to track moving objects?" Click No.
3. At this point, you will see a bounding box on screen. That bounding box should be placed using the mouse cursor on the object
that is going to be tracked, in this case, the circle. Resize and position the bounding box accordingly.
4. Once you have the bounding box on the object and resized, click on Track Object at the top right of the monitor.
The screenshot below shows only the before clicking Track Object at the top right of the monitor.
When that action is finished the bound box edges will be an orange yellow color. I have skipped over a screenshot
for the latter.
5. With the orangel yellow bounding box in place, next drag the Clip Art (in this case, Butterfly 02) from the Clip Art display area toward and into the orange yellow bounding box frame. The orange yellow bounding box frame will turn blue. That is the first sign of success.
Hit the Enter key of the computer main keyboard and watch the results. The Butterfly should track the circle's
movement in the clip. The duration of the clip and the continuity of the object's motion in the clip can be other factors.
If you do not succeed, try again with a different video clip (one with more movement and color contrast.
The above is a best case scenario. If it is speech bubbles that you are having problems with as well, we will deal with them next.
Right now it seems like you are having problems getting started rather than having a problem with a specific Clip Art that you are
using to track the object in your video.
We will be watching for your results.
ATR

How do I fill a gap with silence, at the beginning of a track, in multi-track mode?

Hey everybody!
I have 2 tracks in multi-track mode ... one is Music and the other is Vocals. The music starts at the beginning and lasts 3 minutes. The vocals don't begin until 10 seconds into the music. I need to insert silence in the beginning of the Vocals, because I will be sending both tracks to a producer and I want the tracks to line up from the beginning. Otherwise, they will have to line up my vocals.
Thanks for any help. :-)
Joe

I would just line the vocal track up by sliding the appropriate amount and then right mouse click and bounce that track down to another track and send that one as it will have that 'silence' embedded into the start.

Standby db in R/W mode with RMAN

Hello,
I have a test environment that I have a physical non-managed standby database created in a virtual machine. I would like to use a physical standby database for read/write testing and reporting. I've been implementing the Data Guard Scenarios and tried to see if I can revert the activated database back to a physical standby database. However, I keep receiving the following error when I try to open the standby in read only mode:
ORA-16004: backup database requires recovery
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF'
Note: The standby db starts up as follows:
startup nomount pfile=C:\oracle\product\10.2.0\db_2\database\initORCLstdby.ora;
alter database mount standby database;
Once every x minutes, a batch job ships the logs from the primary to the secondary and runs the following:
connect / as sysdba
spool c:\scripts\logapply.log
alter database recover automatic standby database until cancel;
alter database recover cancel;
Here's the steps I've done:
1. On the standby database, query the V$DATABASE view and record the current SCN of the standby database:
SQL> SELECT CURRENT_SCN FROM V$DATABASE;
CURRENT_SCN
1804721
2. This step didn't work/isn't necessary:
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL
ERROR at line 1:
ORA-16136: Managed Standby Recovery not active
3. Connect to the standby database as the RMAN target and create an incremental backup from the current SCN of the standby database that was recorded in step 1:
RMAN> connect target "system/password"
connected to target database: ORCL (DBID=xxxxx, not open)
RMAN> BACKUP INCREMENTAL FROM SCN 1804721 DATABASE FORMAT 'C:\tmp\ForStandby_%U' tag 'FOR STANDBY';
4. Connect to the standby database as the RMAN target, and catalog all incremental backup pieces:
RMAN> CATALOG START WITH 'c:\tmp\ForStandby_';
5. On the primary database, switch logs so the SCN of the restore point (created in step 1) will be archived on the physical standby database and ship it to the standby database:
SQL> ALTER SYSTEM ARCHIVE LOG CURRENT;
6. Activate the physical standby database:
SQL> ALTER DATABASE ACTIVATE STANDBY DATABASE;
SQL> STARTUP MOUNT FORCE;
SQL> ALTER DATABASE OPEN;
Make any write changes on the activated standby database.
7. Revert the activated database back to a physical standby database.
SQL> STARTUP MOUNT FORCE;
Connect to the standby database as the RMAN target and apply incremental backups
Open another session for RMAN:
RMAN> RECOVER DATABASE NOREDO;
Back to SQL session
SQL> ALTER DATABASE CONVERT TO PHYSICAL STANDBY;
SQL> SHUTDOWN IMMEDIATE;
I then run a batch file that automatically start the standby database and recover from the shipped archive logs:
startup nomount pfile=C:\oracle\product\10.2.0\db_2\database\initORCLstdby.ora;
alter database mount standby database;
SQL> alter database recover automatic standby database until cancel;
alter database recover automatic standby database until cancel
ERROR at line 1:
ORA-00279: change 1804724 generated at 04/25/2008 18:14:16 needed for thread 1
ORA-00289: suggestion : C:\ARCHIVELOGS\NODE2\ARCH_1_1_652990391.ARC
ORA-00280: change 1804724 for thread 1 is in sequence #1
ORA-00278: log file 'C:\ARCHIVELOGS\NODE2\ARCH_1_1_652990391.ARC' no longer
needed for this recovery
ORA-00308: cannot open archived log
'C:\ARCHIVELOGS\NODE2\ARCH_1_1_652990391.ARC'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
SQL> alter database recover cancel;
alter database recover cancel
ERROR at line 1:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF'
I've tried another approach to step 7:
SQL> STARTUP MOUNT FORCE;
SQL> ALTER DATABASE CONVERT TO PHYSICAL STANDBY;
SQL> STARTUP MOUNT FORCE;
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT;
I get an error if I try this:
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCO
NNECT;
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT
ERROR at line 1:
ORA-38500: USING CURRENT LOGFILE option not available without stand
When I try to open the standby database in read only mode, I get this error:
SQL> alter database open read only;
alter database open read only
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF'
I ran SELECT SEQUENCE#, FIRST_TIME FROM V$LOG_HISTORY; and found that the standby sequence# is only one sequence behind the test primary database.
I'm stuck and would appreciate any help. Thank you.

And how do you think you will conserve disk space with RMAN ?
Stop and think about it : How can you revert a database AFTER you have Opened
it Read/Write ? You need to flashback it OR restore it from a backup taken before
the OPEN.
So, you could have taken a backup to Tape or to alternate disk before OPENing the
database. The backup to alternate disk can be via Flashback Recovery area or
a regular RMAN (compressed, you want ?) backup. In the second case, you wouldn't
be using a Flashback mechanism but a simple backup and restore method.

Nokia 500 Problem with Tracking mode and touch sc...

Hi,
I just bought Nokia 500 and I am having lot of problem
1. When I use navigator..it should be in tracking mode not in browing mode so I can see where i am going on where is the turn. But as soon as it calculate the route, withing few second it automatically comes in browsing mode. Even if I press back arrow on left bottom corner it again shows browsing mode. However, sometime it's working fine and always display tracking mode. I am not sure how to switch between the mode. As per manual, I need to hit the back arrow left bottom corner but that does not work for me.
2. The second problem is really bad. The touchscreen response is slow. It looks like the processor is slow. Particularly if I go to Setup menu..it automatically goes to system. I just touch Setup on main menu and sometimes it automatically goes into system. If I manually go to system..it automatically goes to About ..menu. It just behaves randomly..I have done screen calibration many times. but still issue is there. Also, when I got to keyboard to enter address..it automatially press Q key. Not sure what's wrong here
Anybody please suggest me what's wrong. Do I need to replace it with nokia?

Hi
Night mode is designed to work without flash. So either use flash or night mode, but not both.
Cheers
Gryff
------ N78 -------

Motion Tracking Mode - does this do the "highlighting" I'm trying to do?

I read through the Adobe tutorial/help for this feature. It sounds like this will do the "highlighting/shadowing" of a football player that I'm trying to do.
Has anyone used this feature?
I got some great instruction/suggestions regarding this yesterday (Hunt - your link was very thorough -- but with my low patience tolerance + ADD, I couldn't quite wrap my head around it at 2am!!).
So -- again, Motion Tracking Mode? Any feedback on the feature?
Thanks again to everyone here -- you are a wealth of knowledge and friendly help!
Kim

That "arrow method" is one that I cover in this ARTICLE. It can be very effective, and takes far less work than the Track Matte Keying of various Effects. The latter can be very powerful, visually, but does require more work to accomplish.
Good luck, and do check out Muvipix. Lot of good articles, threads, Assets, and more, plus there are a lot of great people, who do not hang out here. Their Community is more varied, and many do not use much Adobe in their various workflows, so it's a great resource, when working outside of the Adobe programs. There are also several subscribers, who to a lot of academic athletic work, so they know some neat tricks.
Hunt

Universal Track Mode? off is the only way to make a bus (stereo) ?

Is Universal Track Mode? (Off)unchecked, the only way to make a bus (stereo) ?
In logic 9 is this the case?
Can someone out there verify this please? Or am I just missing some thing?
If Universal Track Mode is (ON)checked in the audio preferences tab, all of the bus sends in the send section and the bus output choice in the channel strip output section are only mono?? thanks for any reply.

I've been using UTM On (the recommended choice) since Logic 4.x and my busses have always been stereo, just fine.

Universal Track Mode On or Off?

I just read through the Universal Track Mode section(s) in the manual, but am still very much trying to wrap my mind around this subject and obtain a better, more thorough understanding of this particular dynamic and how it relates to a project. Can someone help me with the pros and cons/applications of UTM in the on and off mode?
I know this is a very general(ish) question, and I'm sorry I'm not providing some more specific direction here. This question is more of a starting base from which will hopefully spring a discussion that will help provide me and all others who are interested in this topic a fuller understanding of Logic's UT mode .
Thank you very much all for all your help,
Javier Calderon

Hi, Yildox. Isn't the default itself UTM? i.e. activated, as opposed to NOT activated? As far as I know, UTM allows you to choose an individual track as being stereo or mono. If UTM is not activated, then the track is set to mono, and if you set it to stereo, then it seems to use the NEXT track - regardless if there's any audio region in it or not - as it's next audio channel.
Do a search under Universal Track Mode in the Logic user manual, and it will give you a little bit more info on it.
And what kind of problems are you having with split stereo channels?
Oh . . . and thank you Bee, for the help. As far as I'm concerned, that pretty much settles that. I'll stick with UTM activated and just leave it at that.

Write a ms dos script for rman backup

Hi all,
i wanna write a dos batch file to take the rman backup..
i have written one...actually there are 2 files. one is for login purpose...other one is for sql commands
rman.bat-->
rman target sys/sysadmin@hnbhrm @'c:\rm.sql'
==============================
rm.sql-->
configure retention policy to recovery window of 7 days;
configure controlfile autobackup on;
run {
alter system switch logfile;
crosscheck archivelog all;
crosscheck backupset;
backup database plus archivelog;
DELETE NOPROMPT ARCHIVELOG ALL COMPLETED BEFORE 'sysdate -1';
DELETE NOPROMPT OBSOLETE REDUNDANCY = 1;
========================================
but i have problem in first file rman.bat. it doesnt run at all. but if i write sqlplus / as sysdba instead of rman thing.. then it works fine.
can anybody tell me whats happening over there please..? Have i done this correctly? or u have some other simple way to do this...
both files are located in C drive.. and oracle is installed to E drive... oracle path has set already.
can anybody please give me a hand to solve this issue please...
Thanks in Advance,
Max

write a ms dos script for rman backupImpossible. rman does not support MS-DOS. It is not a 16bit real mode application that can be run inside the MS-DOS operating system.
So get your terminology straight - the Windows console is a character based 32bit virtual machine. It is not MS-DOS. It never was MS-DOS. Do not confuse the two simply because of superficial similarities. A stick-it note can be yellow - but because it is yellow does not mean it is a banana.

Day/Night mode for Smartband

Hi,
Would it be possible to have a different auto night mode for weekends? The app doesn't monitor my sleep properly when I stay up late and sleep in on my days off.
I know I can turn night/day on and off but the current instructions for the device are pretty bad and I am not sure how to use it.

To toggle between Day/Night mode is a long press of the button - until you feel the vibration.
I turned off the autosleep mode - because I don't go to sleep at the same time every night. I turn to Night mode when I go to sleep, but I have had times when I forgot to switch back to Day mode when I wake up. Ended up with no data tracked which is extremely annoying. The band is able to tell that I'm no longer in "light" or "deep" sleep, so why can't it switch back to Day mode if it can detect continuous activity, ie walking?

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

How do I troubleshoot Flash Player's protected mode for Firefox?

Starting with Flash Player 11.3, a protected mode was added as a new security enhancement for Firefox 4.0 and greater on Windows Vista and higher. This security enhancement is designed to limit the impact of attacks launched from malicious Flash content (SWF files). For additional details on this feature, please see Inside Flash Player Protected Mode for Firefox
After reviewing this FAQ, we'd appreciate if you would take a minute to let us know if it helped. There is a link to a two question survey at the bottom of the page.
While we believe this feature is fully tested and reliable, if you encounter issues with Firefox we recommend the following troubleshooting steps.
Problem: Flash content does not appear, YouTube display errors such as "An error occurred. Please try again later.", or Flash video will not function properly.
Solution: If RealPlayer is installed on your system, please disable the RealPlayer Browser Record plug-in.
Launch RealPlayer
Click the RealPlayer icon in the upper left corner of the window and choose Preferences.
Choose Download & Recording from the left hand panel
Uncheck "Enable Web Download & Recording for these installed browsers"
Click OK and close RealPlayer
Restart Firefox
If you are viewing this page in Firefox and Flash Player is not working, please click here for an HTML5 version of this video: YouTube HTML5 HD Link
Problem: RealPlayer is not installed, Flash Player crashes in Firefox
Solution:
Troubleshoot Extensions and Add-Ons by launching Firefox in Safe Mode
1. Exit Firefox
2. Click Start > Run
3. Type the following then press [Enter]:
firefox.exe -p
4. Click Continue in Safe Mode
5. Attempt to reproduce the problem
If the problem does not occur in safe mode, please try to isolate it down to an individual plug-in.
1. Exit Firefox
2. Re-launch Firefox
3. Click Firefox > Add-Ons > Extensions
4. Click Disable on all of your extensions
5. Attempt to reproduce the problem, while enabling each extension until you can reproduce the issue
If the issue persists in Safe-Mode, please continue with the steps below:
Some users have indicated that random crashing stops when clearing their Firefox profile. This step will allow you to temporarily test with a clean set of Firefox preferences, without losing your preferences.
Exit Firefox
Click Start > Run
Type the following then press [Enter]: firefox.exe -p
Click Create Profile
Click Next
In the Enter new profile name dialog, type "Test"
Click Finish
Select Test and click Start Firefox
Use Firefox as normal. If the problem goes away, clearing your Firefox preferences, or migrating the important settings (bookmarks, etc) to a clean Profile may be a good permanent solution.
If the problem persists, switch back to your old profile by doing the following:
Exit Firefox
Click Start > Run
Type the following then press [enter]:firefox.exe –p
Choose your old account (typically "default")
Click Start Firefox
Solution: Try a clean Windows profile (You must be an Administrator to complete this step. If your user account is not an admin type, skip to the next section for instructions on reporting a bug.) Creating a new Windows user will rule out any account-specific preferences that may be enabled on your system.
Create a user account in Vista
Create a user account in Windows 7
Use Flash Player normally. If the problem goes away, this indicates a compatibility problem, either with software you have installed or with preferences set on your account.
Reporting a bug:
Please file bugs at bugbase.adobe.com.
Choose "Adobe Flash Player" as the product
Choose "Browser Integration" as the product area
Please provide as much information as possible with what you were doing before the crash and an exact URL where the crash occurred.
If available, please attach your Firefox crash logs to the bug using the Attachments field.
Show hidden files and folders. For more details, see the instructions for the operating system that you use: Vista and Windows 7.
Crash logs are located at C:\Users\username\AppData\Roaming\Mozilla\Firefox\Crash Reports\
Logs will be located in either the pending or submitted folder, depending on whether or not you submitted the crash report to Mozilla.
Last resort
Finally, if these problems are blocking you from using Flash Player we recommend, as a last resort, you either revert back to Flash Player 11.2 or temporarily disable Protected Mode. We strongly recommend that Protected Mode is manually enabled once this issue is resolved.
To revert to a previous version of Flash Player, please see this FAQ: How do I revert to a previous version of Flash Player?
To disable Protected Mode, add the following line to your mms.cfg file located in:
Windows 32bit: C:\windows\system32\macromed\flash
Windows 64bit: C:\windows\syswow64\macromed\flash
ProtectedMode=0
If the mms.cfg file does not exist, create one using any standard text editor (e.g.. notepad)
Depending on your operating system, you might need to first save the mms.cfg file to a writable location (such as your documents or desktop folder) and then copy the file into the destination folder using Windows Explorer.
To re-enable Protected Mode, simply remove the line from the mms.cfg file.
Hopefully this FAQ helped you. Please let us know by taking a minute to fill out this simple survey.
Did this FAQ help?

Please ask your question on a forum for the Flash Player

Tracking mode for RMAN

Similar Messages

Maybe you are looking for