Transaction commit unsuccessfully - during import of Profit center in 8.81

Hello Experts!
Good day! I've been trying to upload using DTW template for cost center. During "run simulation" it was run successfully, but during actual import, the error per line is transaction commit unsuccessfully. I have tried several date format but the only format accepted is yyyy-mm-dd. I cannot figure out the reason for this. Kindly help me in solving this issue.
My SAP 8.81 patch level is: 5 and my DTW version is 88.1.4.
CenterCode     CenterName     GroupCode     InWhichDimension     EffectiveFrom
CenterCode     CenterName     GroupCode     InWihchDimension     EffectiveFrom
SV-1     FORD FIERRA/PFL-128     SV     1     2011-01-01
SV-4     ISUZU ELF/UJZ-630             SV     1     2011-01-01
Regards,
Luz A. Cornejo

Hi Luz,
You're already said that you could successfully upload it in Test Run mode, so I don't think you made any mistake whatsoever with date format, field mapping rules, etc. considering if you made any mistake in that regard, you will get error message even in Test Run mode.
I'm not sure if this could help you, but I once encountered same problem like you back then few years ago, if I remember correctly in SBO 2005. The very same problem, Test Run mode success, when I wanted to upload it permanently, error. The problem is, I didn't use DTW from latest patch. You said that you use PL 5 but your DTW PL 4. Maybe you should try upgrade your DTW to PL 5? Not sure if this helps, good luck.
Best Regards,
Hendry Wijaya

Similar Messages

DTW Transaction Commit Unsuccessful

Hi All,
I'm using DTW version 2005.0.29. When I tried to import transaction, it gave me error message "Transaction Commit Unsuccessful". I would like to know what's causes it.
Regards,
Foong Yee

Hi Foong,
Here is the solution from SAP note:
DTW 2005.0.27: Handling a Transaction Commit Failure
Symptom
If a transaction commit operation is unsuccessful, for example, the stored procedure SBO_SP_TransactionNotification failure leads to a failed transaction commit, Data Transfer Workbench shows a successful import, even though the data has not been imported.
Other terms
DTW, Data Transfer Workbench, B1, SAP Business One, Transaction, Commit
Reason and Prerequisites
Bug
Solution
An upgrade to DTW2005.0.27 includes this functionality. If a transaction commit operation is unsuccessful, Data Transfer Workbench shows the import as failed and generates an error message.
Based on the note above, I think it is a bug of DTW you are currently using. I suggest to upgrade the DTW version including the DI API version so that the DTW can run.
Rgds,
JimM

Transaction code: 9KE0 - Posting with Dummy profit center

Hi All,
We have an issue with transation 9KE0, While posting any adjustment entries with single line item, system automaticaly creating second line item few times. We were unable to find the reason why it is creating second line for few documents?
Our requirement is that those entries should have only one line item in transaction 9KE0. Most of the cases we were able to post the document with single line item.
We are using almost 100 co.codes for our client.
For ex: if we post one entry in co.code 1000 through transaction 9KE0 with single item, system posting with one lineitem.
But some times for the same co.code with same parameters if we post one line item, second line item automatically creating with dummy profit center while posting.
Please let us know why the system is creating two line items.
Awaiting for your replies.
Thanks in Advance
Prasad
Edited by: prasad naga on Feb 22, 2011 2:53 PM

Hi,
We have further analyzed this issue and found that, whenever the amount in field(KSL -Amount in profit center local currency) is ZERO, System it is creating second line item with dummy profit center.
ex:1
proft cenert        account         amount in co.code cur    amount in profit center local currency
9999                    100000             - 0.13                                 00
dummy                 100010               0.13                                 00
ex:2
proft cenert        account         amount in co.code cur    amount in profit center local currency
9999                    100000             - 3.13                                 1
we have verified the values in GLPCA table also... whenever the tech field KSL-Amount in profit center local currency is zero system creating two line items.
Please suggest us is there a solution to stop the second line item even the amount in profit center local currency field (Tech name -KSL) is Zero
Awaiting for your suggestions.
Thanks in advance
Prasad

FICO Transaction to correct imbalance in 2KEE Profit Center due to KALC

Hi,
I am facing an issue with PC report.
When 2KEE is run:
the column In PROFIT CENTER CURRENCY shows USD$ 40k
the column COCODE CURRENT the amount is ZERO
I need to post manually as a workaround that equal both columns for Period 3 (March). FBB1 did not work for me.
Would anybody know which transactions can be used ?
Any input is welcome.
Regards
Roger

SAP Note being provided by SAP AG.

Import Profit center in invoice by DTW

Dear experts,
I have to import the "Profit center" in an invoice by the DTW but I don't find the column, in the templates, where to insert this data.
Thanks.

Hi Paolo,
You could set the required value in the field 'CostingCode' in the lines template.
Regards,
Vijay Kumar
SAP Business One Forums Team

Transaction from production order always post into dummy profit center

Dear SAP experts,
I have problem with profit center.
I have material master "A1" and "A1B1". The process is "A1" is raw material for making "A1B1".
The CO team forgot to entry the profit center field in both of material in their material master.
So when there are posting " material consumed " and "good receipt" in production order,PL account "material consumed" (happen when good issue to production order) and PL account "production output" (happen when good receipt from same production order) are mapping to dummy profit center.
This because of the CO team forgot to entry the profit center field in both of material in their material master, so ssystem post to dummy profit center.
So I change both of the material masters and entry the profit center field (so it's not blank).
But when the PP team make new production order and post the same transaction, it still post into dummy profit center (the profit center that I entry in material master is not read by system).
Even when the PP team create new material with the same spesification,entry the profit center field and run the same transaction, the dummy still posted by system.
How to solve this problem?
Kindly help me please.
regards

Hi Anu
After maintaining the PC in the mat master, create a new Prod order w/o copying from the Old Prod Order...
Once you maintain PC in A1B1 - It should update the Prod Order of A1B1 as well
br, Ajay M

Cost Center assign Profit Center Issues

Hi Controlling Expert,
i have one issues regarding, Cost Center assign to Profit Center
wht happened , we have made MIS Report Thru Report Painter KE80, we have map based on   Primary Cost Element, at the time of Business Transaction, we have capture the Finance Cost center i.e FI000, Marketing Cost center i.e MK000 , HR Cost Center i,e HR000 and assign the same cost center FI000 to Profit Center i.e FI000 also same name, respectively. in MIS report there is two Head i.e Sustaining Cost and Development Cost ,where we have to capture only Cost center for Sustaining Cost related to display i.e FI000, MK000 and HR000. KE80 report belongs to Profit Center wise you can see the Report. But same FI000, MK000 and HR000 also updated related with business transaction and capture above cost center like in depreciation GL Amount 1000 cost center FI000 and sustaining cost also updated the same amount 1000 because we have assign FI000, i.e wrong . last 3 months post the amount now wht should I do for not updated sustaining cost, as I understand , should be delete sustaining Cost as well Development, and later on we can take report from KSB1 for FI000, MK000 and HR000, for management purpose, so if I cannot assign profit center FI000 to Cost Center .kindly correct me whether ryt or wrong. Coz Fianance, HR cost and marketing is only cost center. not suppose to assigh profit center, in this case how Profit Center removed from Cost center. kindly let me knw, or give me other option.
wen we see the report same Profit Center showing two times along with amount i.e wrong coz of Sustaining Cost we have assign Profit Center
in this report particulars are Below
Revenue : Relevant GL ( At time of Business Transaction we have captured the Relevant Profit Center i.e Finished Product i.e R100: RA Tube
and RA Tube R100 assign with same Cost Center R100.
B.Material Cost : Relevant Primary Cost Element
Manpower      : same like Above
2.Energy            : same like Above
3.Consumption   : same Like Above
Conversion Cost (1+2+3)
Sustaining Cost   : Here we have given Profit Center i.e FI000, MK000 and HR000 these profit center assign
Development Cost : Here we have given profit Cente EN000
Profit      (A-B-C-D-E-F)
G.Depreciation : Relevant Primary Primary Cost Element
Financing Cost : Relevant Primary Cost Element
I. Other Income/Loss : Relevant Primary Cost Element
PBT : (F-G-H-I)
Kind regards
Pranav Kr. Gupta
SAP FICO Consultant.

Hi Pranav
You are logging same issue twice. I didnt see any difference in the two threads though.
If its the same issue, request you not to repeat this in future.
KE80 report two times value effected
Regards
Mustafa

Balancing field "Profit Center" in line item 001 not filled

When i am doing Posting with clearing(FB05) i am getting the below error message "Balancing field "Profit Center" in line item 001 not filled"
Background: When we are doing the MIRO transaction we have used a diffrent profit center than it came from the Purchase Order where we have added extra cost and included the new line items under GL tab and posted the Invoice.
Now i want to tranfer that to a diffrent Vendor and clear it. So i used FB05 transsaction. When i tired to do the transfer posting with clearing i am getting the error message "Balancing field "Profit Center" in line item 001 not filled" As we have under the document split Zero balances check box checked along with the Profit center Mandatory for field Profit Center. The system could not determine which profit center it has to use.
Thanks in advance.

Hi Kiran,
Could you tell me how you are able to resolve this issue as we are having the same issue.
Did you use the substitution rule?
Please let us know.
Thanks,
Madu

Profit center is missing in profit center report

Dear Expert,
I created a billing , but the profit center document is not created automatically / missing. in fact I already maintained the profit center in material master, and also in OKB9 I have select the profit segment for sales account.
I checked in the journal , there is an information about the profit center same as in the material master which i have maintained. but when i checked in the profit center report there is no such profit center data enter from that billing transaction, then I tried transaction using T-code 1KEK, error message occur "cannot post profit center xxx in Fiscal Year 2010". I have checked the period is correct and profit center is active.
Please help.. why the profit center is missing?
Thanks
Pauline

Hi,
Check transaction 1KEF whether online posting of profit center document is maintained for current year or not.
Regards,
Sreekanth

Derivation Of partner profit center in COPA (Direct Posting from FI)

When posting from SD partner profit center is derived and transfered to COPA, so eliminations can take place.
When ever we made posting from SD, Partner profit center is coming from derivation rule which is exclusively for sales and maintained in transaction code 8KER.But whenever we made direct posting in FI, Data is transferred to COPA before profit center is derived as system does not find any data from COPA or in other words there is no any Derivation rule or table lookup or user exists in COPA from where we can derive the Partner profit center.
For testing purpose I made a derivation rule in COPA in KEDR with the same logic used in 8KER, Partner profit center is coming in COPA from this derivation rule. Derivation logic used in 8KER is very simple : source filed is KUNNR from table KNA1 and target Field is Partner Profit Center : PPRCTR from table CEPC.
I mean that i derive the partner profit center from customer number in 8KER transaction which is only for SALES and in EC-PCA only.
Now whenever I do a direct posting from FI, suppose using transaction code F-02
but partner profit center is not coming. I made a another derivation rule in KEDR in COPA and maintained the rule values there and I got the success for deriving the partner profit center.
But my query is that If I am maintaing rule values in 8KER then why I maintain the same duplicate data in KEDR.Can we use the same rule values from 8KER for direct posting of FI.
I have tried with Table lookup, derivation rule in KEDR but not getting any success.
Please tell me that without maintaing rule values in KEDR (as these are already maintain in 8KER)how I can derive the partner profit center from FI posting.Or in other words i can say that how we can get both PCA as well as COPA document with partner profit center in case of FI direct posting.
Thanks in advance.
With best Regards
Sandeep Seth
[email protected]
Thanks in advance

Dear Paolo
we have live system, we also have cost center accounting active.
do u know how to active automatic posting in Profit segment through cost center.
For Example, i post document in FB60, i assign cost center against GL expense account, if i assign profit segment the amount reflects in COPA, but i want when i assign required cost center it automatically active the profit segment ?
hope you under stand my query!!!
Regards
MuR!!!!

Profit Center in Customer and Vendor Line item

Hello Guru
i have one doubt we have activated the new GL in one of client for profit center level. while posting through any of financial transaction particularly customer and vendor there is no filed for input parameters for profit center. while booking these kind of transaction system pick up the dummy profit center. even our field status group for gl master data and posting key made as optional PCA filed not displaying. client want it should be pick up automatically from line item and should be input parameters.
how to resolve this issue please let me know.
waiting for your reply
Thanks & Regards
Laxmi narayan

Hi,
You are saying that u have activated New G/L, but are u gone for document spliting also or not? if you have activated document spliting customer and vendor line items not at all required any profit center because it will petch the profit center from oppsite line item automatically for giving tallyed balance sheet at profit center leavel, so no question profit center required or going to dummy profit center because dummy profit center will be locked automatcially once u activate document spliting.
if you have not activated document spliting then customer and vendor line items may require profit center its depends on your field status settings, if you feel that it should not go to dummy profit center then maintain some profit center in 3keh & 3kei settings for customer and vendor reconcliation accounts, so that it will post to that profit center.
Thanks & Regards
T N R

Automatic clearing of VAT accounts as criterion Profit center

Hello all,
We are trying to make automatic clearing for our VAT GL Accounts thru transaction F.13 and the criterion Profit center on table TF123.
The requirement is to clear the VAT line items form invoices against the documents generated by standard VAT declaration S_ALR_87012357.
This is not working as the profit center is not populated in Bseg on VAT line items, only in FAGLFLEXT.
How can we clear the VAT line items based on profit center automatically, is anyone already done this ?
Thank you
Tamim

Thank you Mahesh,
The posting document generated by VAT declaration regroups many VAT postings, example
If I have 10 Invoices with VAT (each invoice with different Assignment), the VAT declaration will generate only 1 document, and regroup the different invoices VAT amount by profit center.
That's why assignment is different between VAT line item, and VAT declaration document line items.
Also, we do not have PO number most of the cases.
We really need clearing on profit center as it seem the only shared value.
Is there a solution for this issue ?

Updating the dummy Profit Center

Hi Experts
I am using the PCA with new GL , here I have created the dummy profit center also
My query is some of the business transaction are updated in the dummy profit center
What could be the reason for updating the dummy profit center suppose if I am not give any profit center
Those entries are getting updating ?
In this new Gl concept how to transfer the balance to exact Profit center ?
Thanks
Sri

Hi Venkat
You should not have activated Classical PCA if you are using New GL.. New GL PCA is a much better functionality
Anyways, the reason for DUmmy PC is only that you did not assign the PC in the CO Object like Cost Center.. PC is always derived from Cost object. So, if the CO Object has no PC, the line item gets Dummy PC
There is a SAP note 702854 which offers steps to deactivate Classical PCA.. If you wish you can do that.. There is no harm as such in having Classical PCA, but New GL Is better
Br. Ajay M

EBS clearing using profit center

HI experts,
Is enhancement : FEB00001
the right enhancement to manage to have our BAI electronic bank statement transaction clearing based on the document profit center?
eg. I could have 2 outstanding deposits in my GL with same amount and assignment infos the only way to identify to which branch it belongs is the profit center.
If not, how can we achieve this business requirement?
Kindest regards,
GV
For transaction clearing BAI 201 (deposit) the algorithm is 0015 so by assignment # and we would like to add profit center to it
Message was edited by: G. Vallee

Hi Geneviee,
You are able to append several lines in table T_FEBCL changing field T_FEBCL-CSNUM (should be increasing counter) in order to clear several entries.
SMOD FB00001 documentation says:
"You can use table T_FEBCL to copy as much clearing information as you
need. This may be necessary, for example, if a customer clears several
invoices with one payment. In doing this, do not forget to include the
field T_FEBCL-CSNUM."
I've made a test adding fields ZUNOR and PRCTR with corresponding values but the clearing didn't work. Selection is being made with "OR" conjuction and not "AND", so it is selecting multiple lines. Even if I tried to change (OR->AND) in FB05, selection is not working as expected.
Given this situation I would try to search document numbers, in the exit, with corresponding zuonr and prctr and try to clear by BELNR.
Best Regards!

Profit Center Accounting Extraction

Hi guys,
   I need to extract <b>Account Group</b> in my SAP R/3 to SAP BW
<b>Profit Center Accounting > Account Group</b>
    Please advice if I can use any of the Standard Extractors to extract the Account Groups to SAP BW ?
    Your advice is very much appreciated! Thanking in advance

Hi Dinesh,
Thanks for the link.
I can get the following from R/3 to BW at the moment :-
Profit Center Accounting Transaction Data
Statistical Key Figures in Profit Center Accounting
Line Item
Line Items in Periodically Transferred Balance Sheet Accts
But, what I really need is Account Group details in Profit Center Accounting.
Please advice how can I capture this into SAP BW ?
Thanking in advance for your help, mates!

Transaction commit unsuccessfully - during import of Profit center in 8.81

Similar Messages

Maybe you are looking for