Transaction Data Icon Missing For FlatFile Datasource

Hi All,
We are loading the data by using the flat file data is loaded successfully.But beside the cube we will have activation icon , Aggregates Icon and Transaction data icon. In our case we are missing transaction data icon.What could be the reason.
But data loading is fine and for some of time chars also data missing .
Pls anybody can throw some light on this.
Thanks in Advance,
Shah.

Hello S SR,
How r u ?
just see the top and make the column adjustment like we do in MS-EXCEL you can see the Transactional Data ICON.
Best Regards....
Sankar Kumar
+91 98403 47141

Similar Messages

FAGLF101-Account determination for transaction V02 is missing for account

Morning
When I run the "faglf101" transaction, i get this error :
"Account determination for transaction V02 is missing for account 0000401142
Y1 PCG
Message no. FR005 "
I have tried to customize the adjustments accounts and postings keys in the IMG
"Financial accounting > Accounts Receivable and payable >
Business Transactions > Closing >Regrouping > Define adjustments
accounts for changes reconciliation accounts"., but i don't see the part "Regrouping" in the IMG.
I have tried to use the OBBW transaction, but his transaction code "A00-Transfer postings: changed recon. acct" don't correspond to mine (V02);
We are in ECC6.
Can somebody explain to me how can i correct this error please?
Best regards

This is meant for account determination for Receivables/payables sorting. Check your configuration in SPRO->General Ledger Accounting (New)->Periodic Processing->Reclassify->Transfer and Sort Receivables and Payables->Define Adjustment Accounts for Receivables/Payables by Maturity

Master Data is missing for Specified Matierials at cube level !!

Hello Experts,
Good Day..!!
I have been facing an issue in my project, Master Data is missing for a KF and values are not displayed in a report for the specified matierial Nos. Where as other matierial nos KF values are displaying.
Intially, i checked from Cube End and found the issue is in Cube level only.
For that in the data flow, i already checked whether the data has been loaded perfectly or not.
Tried to reran the DTP once again and checked the values for the KF in the report and unfortunately KF values are not displaying for specified matierials only.
Kindly advice how can i move further..
Thanks,
SN.

Hi,
Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
Hope this helps...
Rgs,
Ravikanth.

Master data Lookup missing for sold to party

Master data Lookup missing for sold to party?
The look up flow is from E_BOM to E_BOM1
regards

Hi,
Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
Hope this helps...
Rgs,
Ravikanth.

Bank data is missing for country IN bank key SBIB0000003

Dear Friends
When i am start to print the cheque i am getting the error message
"Bank data is missing for country IN bank key SBIB0000003"
Please me suggestion
Regards
JK
Moderator: Please, avoid asking basic questions

Dear,
Please check in T-Code FI02, that
Bank Country = IN
Bank Key = SBIB0000003
Have you maintained any data there.
Please revert.
Br,VIvek

Open Document Icon Missing for PO Reqs but working for POs

Hi All,
If there are POs and PO requisitions that are awaiting for your approval. You would typically go to Purchasing super user -> Notification Summary -> Worklist choose po/poreqs -> click Open document link to view/make changes prior approving.
The Open Document Link is woking when you open POs but missing for PO Reqs. I went through many docs such as (Metalink doc 356969.1). But unsuccessful. I am think it’s some sort of setup/configuration/profile that needs to be changed.
My Problem is to get the missing Icon for PO Reqs too. Does anyone has info please help me. I dont even know where to look for. Any help is greatly appreciated.
Thanks,
Kalyan.

what is the access level and security level for purchase requisition document

Data is missing for Jan,Feb in 2008

Hi,
I have an issue with the report..The Concrete Profitability Report is using the manually uploaded rates for cost types. The business reported that the actual columns in the reports seem OK (since they come from the loaded amounts for the 12 months in 2008), but the budgeted amounts are showing a big variance and they don't look accurate bcoz the values are not calculated for Jan,Feb for 2008.The report runs based on multiprovider.
Perhaps the budgeted amounts for Jan and Feb in 2008 are missing.
Could yoy please let me know how can i proceed further and help me out in this issue.
Thanks
Sindhu

Hi,
Did u check in the respective cube whether the data is available for that period? check in the cube and also do LISTCUBE on multiprovider.
Khaja

Desktop drive icon missing for just one of several USB external drives

I have a Mac Mini running OS 10.8.2 Server. There are 12 Seagate Flex USB drives (attached through two USB 2.0 powered hubs) and 3 Western Digital Firewire drives, and until last week all functioned absolutely normally. Last week the desktop icon for one (just one!) of the Firewire drives dissappeared, but the drive is still mounted in /Volumes. It is even correctly shared and can be remotelly accessed on another Mini and a MacBook. Disk Utility shows that it is mounted, and the Repair Disk function unmounts, checks, reports all is well and remounts. I'm just missing the icon in Finder. Where is it?
Before you suggest it.... Yes, hard disks is checked under Finder Devices preferences. All the other drives do show as expected in both the root folder view and on the Finder sidebar. This one drive is mounted and visible in ls -ls /Volumes, but missing from desktop, root folder and sidebar in Finder.

I am having the exact issue with both 10.8.5 and 10.9.1 servers.
The server is doing well and then one day without notice or failure the desktop icon for the shared volume is gone. The share remains mounted and available to users. The volume is not showing damaged or any other problem. The volume can be found in terminal and by doing a finder go to the /Volumes area and all is there. But, even though disk utility shows it mounted and all else is good, Server app then starts to loose the volume for maintenance and propogation etc, it still shares but can't be seen or touched by GUI's.
I also was easily able to get back all through Backups that were up to date so no data loss, but this is quite disconcerting.
One possible variable is that both that I have seen are software RAIDs (Disk Utility raids).
If anyone has any thoughts I appreciate it.
The two servers are Mac Pro 2012 4 core 10.8.5 server and Mac Pro 2008 early 4 core 10.9.1 server.
Thanks MDB

Date added missing for itunes 12.

In previous version of iTunes there was a column header option for audiobooks called date added. (when book was added to iTunes). I use the header to sort in reverse order so I get most recently added books at top of list. This option seems to be missing in 12.0.1

It is still there. If you hold the cursor over any column header then control-click a long drop down list appears so you can select your column headers
EDIT: I am sorry, I misread "audiobooks". This reply is only valid for the Music category, I can't verify it for the audiobooks category

Meta-Data are missing for table

Dear ALL ,
I am trying to call "HR_READ_INFOTYPE" from a Java program using rfc and I got this error:
" Meta data equal to null is not allowed for field INFTY_TAB with type TABLE in meta data instance TABLES "
the required table INFTY_TAB is used as a generic table in the function module. I tried to use PA0008 but it seems it is not possible to use it through RFC call. How can I avoid this exception?
Thanks in advance.
Mehdi.

Hi,
This function by default is not remote enabled. Loot at BAPI to access/modify infotype data?
Regards,
Jarek

SQL Developer 2.1.0.63 - Export Data menu missing for SQL Server databases

Hi
The Export Data menu only appears for Oracle databases in this version, it does not appear for SQL server databases.
To demonstrate:
Press F9 to run query
Right click on Query Result data
For Oracle an Export Data sub menu appears
For SQL server no Export Data sub menu appears
This worked in previous versions.
Is this functionality going to reappear?
Thanks
Dave

Hi,
Looks like this is exactly the same problem for third party connections as I have the exact same issue for mySQL.
I had to apply 1.5.5 version to fix it.
Hope we're going to have this solved !
Thanks,
JP

VHO8 - Channel Icon Missing for 17/517

Can someone pass this on to the VHO8 staff -
The channel logo for our local MY Network station, MyPHL17 is missing from the IMG. This is on BOTH the SD and HD channel locations (17/517)
This happened when our area was upgraded to IMG 1.7. From what I can tell, this is the ONLY missing logo.
Thanks for the assistance!

Dear friend,
I have solved the problem by copying the file com.apple.macbookpro17-wi08.icns under /System/Library/CoreServices/CoreTypes.bundle/Contents/Library/MachineTypes.bund le/Contents/Resources/ from my new MBP into the same folder in the MP. Apple is good but "quodammodo bonus dormitat Homerus"...
Best regards,
Macarion.

Email subject and sender data is missing for HTML contents

Dear all,
Good day. I tried to send an email with HTML codes to draw a table. It works, however, the email sender and subject are missing. And the email body looks like the following:
To: abc From: xyz Message-Id: Subject: This is email subject. Mime-Version: 1.0 X-Mailer: SAP R/3 Internet Mail Gateway 4.6B1 Content-Type: TEXT/HTML; Charset="US-ASCII"; Name="NO NAME.HTM" Content-Transfer-Encoding: 7BIT
Table header and contents.
Anyone has idea on what it happens and what is the solution? Your help and advise are greatly appreciate. Thanks in advance.
Regards,
CN

is there any problem with Background spools with SAP? We are running R3 here. And looks like its the spool background job that's creating the error. When i execute the report it shows all the record in print preview or if i print it.
Please Help!

Icons missing for iTunes and App Store. Reset in settings, but they still do no reappear. Anyone know what cot do next? Thanks

Checked several pages of forum. Hope this is not a repeat question. Support info looks like you have to jump through multiple hoops to get app and iTunes icons to reappear on screen, if reset does not work. Anyone know an easier way? Thanks

Settings>General>Restrictions. If you have restrictions enabled, you may have disabled those apps.
You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
Settings>General>Reset>Reset Home Screen Layout.

Master Data and Transaction Data For DB Connect extracted Data...

Dear Experts,
I have been working on SAP NetWeaver BW 7.3 and for the first time I have extracted data from Oracle DBMS by using DB Connect. I have successfully extracted data of a View namely Sales_View into BW by creating a DataSource. This View has about 100 fields and I have been told that this view consists of Master Data and Transaction Data too. For my further reporting needs say building a Dashboard or InfoSpace I have to design a DSO and InfoCube for this DataSource. I'm bit confused about the Master Data and Transaction Data of this DataSource.
1. Should I create all custom InfoObject against all fields of DataSource for DSO and InfoCube design?
2. Do I need to create and load the Master Data for all InfoObjects or I need to create or load the Master Data for only those InfoOjects which will be
used for drill down or reporting in Dashboard or InfoSpace?
3. Do I need to load the Master Data manually by creating Flat Files and using these files for Master Data loading for required objects?
4. How should I approach the designing of DSO and InfoCube?
I will appreciate your inputs in this matter.
Many thanks!
Tariq Ashraf

Thanks!

Transaction Data Icon Missing For FlatFile Datasource

Similar Messages

Maybe you are looking for