Transaction in specific time and on specific event

Hi!
I have a question. (Who doesn't .. :-) )
How to run some transaction in some specific period in time, for example every hour, and on some specific event in the system?
Tnx,
Mirek

For the first part, put the transaction in a procedure and submit the procedure to DBMS_JOB package, so it will run after every specified interval.
For the second part you can specify certain event level triggers, and call the procedure of those triggers
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Miroslav Grgec ([email protected]):
Hi!
I have a question. (Who doesn't .. :-) )
How to run some transaction in some specific period in time, for example every hour, and on some specific event in the system?
Tnx,
Mirek<HR></BLOCKQUOTE>
Hope this helps,
Naveen

Similar Messages

  • How to query in SCCM 2012 to know how many active and inactive clients in a specific time and date

    Dear Everyone,
    Good morning. I need to perform a query to know how many clients PCs are active or inactive during the a specific time and date (let say, today 9pm). In my query, I want to know:
    1. How many client PCs is active at that time and date?
    2. How many client PCs is not inactive at that time and date?
    Any assistance is greatly appreciated. Thanks.

    Thank you Gerry for pointing out that it doesn't show real time date. I do agree with that. However, I am look at the (at least in this) report which supposed to [description] shows a list of computers not reporting any power activity for a specified date
    and time. Since I can only key in date in my selection (time option not given), I am expecting the report to show me whether there any client PCs that doesn't any power activity for the specified date. A list was generated, and a number of them shows HardwareInventoryScan,
    LastHeartBeatScan and LastPolicyRequest on the same date itself. I would like to know why these appears, so that I can learn from it.
    Due to the selection option given, I can't expect my original goal, but at least (hopefully) I can get to know (past event) how many and which client PCs is not powered on a particular date based on the date and collection selected.
    At least by getting explainations, I hope to learn something from this (how to read this report). Thanks in advance.

  • Can I limit the number of appointments made by everyone at a specific time and place?

    I want to limit the number of people who make an appointment at a specific time and place.  Can I do this?

    Which Adobe software are you using?

  • SCCM 2007 Determine packages/task sequence distributed specific time and date

    Hi All,
    Back from holiday to find SCCM task sequences for client PCs have been pushed to servers :(
    My knowledge on SCCM/SQL is somewhat limited.
    Are there ways to find task sequences that are distributed specific time and date and to which collections?
    Many thanks!

    managed to sort this out myself.
    On a affected machine, I've located a logfile 'smsts.log' in '
    C:\Windows\SysWOW64\CCM\Logs', then searched for advertisement prefix.

  • Is there a way to see specific times and duration of phone calls?

    Is there a way to see specific times and duration of phone calls?

    Tap the phone button, then Recents. You see a list of the recent calls and can tap the arrow to the right of the name/number. That should give you the time and duration.

  • How to Run a Request Set on specific days and at specific hours

    Hi community,
    The question is simple, how to rin a Request Set on Specific Days and at Specific hours?
    Let me explain the scenario.
    E-Business Suite, Release 11.5.9.
    We have a request set under Sysadmin user. This Request set is running 24x7, during all year, and we want to restrict the execution from Monday to Friday since 08:00 a.m. to 20:00 p.m. in order to increase the productivity of our system and more over, to avoid the size increase of a table (OE_EXPOSURE_INTERFACE)
    The Request Set includes 5 Requests:
    10. Workflow Background Process.
    20. GUZMAN: Cálculo metodo pago en pedidos.
    30. GUZMAN: Exposición de crédito externo.
    40. Credit Exposure Import.
    50 Initialize Credit Summaries Table.
    As you can see three of them are standar Oracle Order Management Processes and two of them are custom Oracle Order Management Processes; and the requests must be executed in that order.
    We have just thinking about to create a Custom Manager with a workshift from Monday to Friday since 08:00 a.m. to 20:00 p.m., and include the requests as specialization rules or assigning those request to a Request Type and then include that Request Type as specializated rule, but this does not assure us that the request will be executed in that order.
    Any suggestion?
    Thanks a lot for your answer in advice.
    Luis.

    Hi Anchorage,
    It could be a solution, but not the exact solution that we want. Let me say why.
    With the Request set we have the security that each concurrent request is executed when the prior one finishes; is that to say 20, does not begin till 10 finishes, and 30 does not begin till 20 finishes and so on. The most critical concurrent requests are 40 and 50, cause those are the ones that import an external credit exposure in the OE_EXPORURE_INTERFACE table (40) and are the ones that delete those external credit exposures imported (50). The problem is (and we do not know why) that these actions makes grow the size of the table and each time the 40 and 50 processes takes more minutes to finish. That's why we need to truncate the table in order to avoid the excesive grow of itself.
    Making each process independent, with a begining time and hoping and expecting that the following one does not begin till the prior one ends is not an admisible or realizable solution due to the problem with the 40 and 50 processes.
    So at the end, we need a request set in order to know that each one began when the prior one ends.
    And Due to in order to truncate the table, as I said before, the processes that have a relationship whit it, must be stopped (just the 40 and 50 processes) prior to the truncation.
    So as you see, it is difficult, very difficult.
    Regards.

  • I am looking for an iPad App that will play a specific iTunes song, at a specific time, on a specific day?  Thank you all!

    i am looking for an iPad App that will play a specific iTunes song, at a specific time, on a specific day?  Thank you all!

    Sorry, i did not say that i need to go out further than 1 week.  This is for a church Bell Tower Music System.  So we don't want to have to re program the music every week.  We are looking for more of a Calender App that will play iTunes Songs for alarms...different songs, on different days.  IDEAS ANYONE ???

  • In which method i can upload data to two transactions at a time and how ?

    Hi,
    Can any body tell me  <b>In which method i can upload datas to two transactions at a time and how</b>
    Pls tell me the steps if possible.
    Thanks
    Prabhudutta

    Hi,
    I hope u are talking abt BDC,
    If it is BDC's Then you can use both the methods.
    Call Transaction or
    Session Method.
    Ex ..if already a vendor exists then call transaction xk02
    if vendor no is not yet created then call transaction xk01.
    hope this helps.
    santhosh

  • Time and sender specific email alerts

    I am on call for a security comapny 24/7 and occasionally receive work at 2am. This comes in the form of an email but rarely wakes me. Is there a way to keep the phone on silent but get audible, sender specific email alerts.
    By sender specific I mean i get these important emails from one person
    Is there an app available that can monitor my emails and if one comes from the specific address, override the silenced phone and alert me till I respond
    If it makes a difference, godaddy hosts my email which is forwarded to my apple mail on my phone

    You could use email VIP which will group them together
    But no there is nothing native other than changing the sound to all emails to something louder
    Or if it's a separate email account manually disabling automatic retrieving of emails on the none security email
    Address and leave them on manual retrieve
    Depending on your email provider you might be able to automatically forward security emails to another email address
    Which you could have on automatic retrieve every xx minutes or push if the mail service supports it
    And any other email accounts on manual retrieve
    You could suggests do not disturb email feature to Apple
    You can enable the led to flash on alerts, but that's for everything
    With Calls you can schedule what time and who can call from settings  do not disturb

  • CPU TIME and DB CPU events under TOP 5 TIMED FOREGROUND EVENTS section in AWR report

    Is there any difference between "CPU TIME" event and "DB CPU" event when shown in AWR report under section "TOP 5 TIMED FOREGROUND EVENTS"?
    As per my understanding of both these terms they indicate the same thing. But then if it is so then why have different names?
    I searched around but the only relevant discussion that I found was as under, which didn't really cleared the doubt.
    https://forums.oracle.com/message/2571255#2571255

    In the article that you have mentioned - Jonathan Lewis gives you a very clear explanation. CPU Time is updated at the end of a query. DB CPU is updated every few seconds.
    So the CPU Time may be less than DB CPU if there is a long running query that did not complete during the snapshot that you are reporting for. Conversly CPU Time may be larger than DB CPU if there is a long running query that spanned multiple snapshots but completed in the snapshot that you are reporting for.

  • Socket read wait for specific time limit for specific character

    Hello again,
    Is there a way to have a socket read for a specific time limit for a specific character?
    An example would be to wait for 30 seconds for an <ENQ> to be read. Naturally if the time limit is reached a SocketTimeoutException exception would be thrown...
    Much thanks.
    -Jeff

    datagramSocket.setSoTimeout(30000); isn't what you
    are looking for?.setSoTimeout() was it... Thanks.

  • Lower Specification Limit and Upper Specification Limit on Inspection Plan

    Hi Experts:
    I'm trying to input the lower and upper specification limit on inspection plan. I created my inspection characteristic but when I trying to digit the values, the systems erase that and give me the values from the inspection characteristics
    Any idea?

    Hi Deihus,
    1.     While creating MIC you create it with upper, lower and target limits.
    2.     The same MIC when you use in inspection plan, all the control indicators and lower, upper values get copied in to inspection plan from MIC.
    3.     In fact this is the reason you can use this characteristic for several material.
    Kindly excuse me as I could not interpret the term when I trying to digit the values . To digit value means what?
    Whether you want to put different values in inspection plan rather than getting copied from MIC? If yes, you can do so. Just overwrite the values on QP01/QP02 and save.
    Regards,
    Anand
    Edited by: Anand Rao on May 16, 2011 10:50 AM

  • How to correlate a specific Idoc and a specific XI xml message

    Hi, I have an Idoc and want to find the belonging xml message in XI. There are more than 90 xml messages to pick from, so I hope there are some other methods to find it, instead of looking inside each one!
    Thanks!

    Hi Rune,
    for that task you have to extend the standard monitoring. Plz have a look at <a href="/people/alessandro.guarneri/blog/2006/02/14/super-message-monitor-for-sap-xi Message Monitor for SAP XI</a>
    Regards,
    Udo
    Message was edited by: Udo Martens

  • Adding Events Without a Specific Time

    Sometimes I want to add an event to a calendar that has no specific time and is not an "all day event." I can't seem to figure out how to do it.

    Having worked for years (decades?) with Palm on a Sony Clio I wonder why iCal is not simply allowing to time (or not) entries without having a names "event" and all that nonsense. The items without time simply display at the top. The ToDo list would be a way out but that is not an option on my iPod touch.
    Just a beginning Mac fan and wondering if there is an answer?

  • How do I set iCal alerts to a specific time the previous day, regardless of their specific time (so I can get an overview of tomorrow)?

    I think it would be incredibly useful to be able to get at, say, 10pm each evening, a pop up overview of the next day's events. I'm hoping for a tick box somewhere to set my default reminder as a specific time on the previous day, in the same way that you can do '15 minutes before'. Currently you can set reminders for a specific time and date, but, entering this for every item – especially if you want them to coincide – is more than slightly tedious. Furthermore, I input a lot of my Calender events on my iPhone (they sync via iCloud), which has no such functionality, rendering this essentially defunct.
    Any ideas?

    apple don't have a version of windows
    only microsoft have windows
    as how one automatate windows to send mails at a time
    googled it for you
    http://www.howtogeek.com/125045/how-to-easily-send-emails-from-the-windows-task- scheduler/
    more options in the search
    https://www.google.dk/search?client=opera&q=automatically+send+email+in+windows& sourceid=opera&ie=UTF-8&oe=UTF-8

Maybe you are looking for