Transaction PPCI : please help !
Hi all,
i need to create a new PD infotype so i searched some informations about that.
I recovered the following document :
http://www.sappro.com/downloads/jan07/OMinfotypes.pdf
and i use the following help : http://help.sap.com/erp2005_ehp_02/helpdata/en/42/51c08e4a1211d182b80000e829fbfe/frameset.htm
I created my structure : HRI9100 and activate it. Now go into the tcode PPCI, i put the infotype number and a description, i click on create button. Help SAP : "The infotype copier generates all of the Repository objects that are required for the infotype.". In my case, i obtain a popup with the text "Infotype 9100 cannot be created. Please look at the following log."
Ok i do this. In dictionnary section, only the structure HRI9100 exists, the structure P9100 has not been created, and the table HRP9100 has not been created etc. Nothing has been created automatically.
Help !
Hi....these are steps.....reqd...
Enter the transaction code PPCI
Enter a four digit infotype number (9nnn) and an infotype name.
Select Field Infotype
Choose Infotype Create.
Choose Check environment to maintain the required entry in table T777I (Infotypes per object type).
Choose the Entry 'T777I' under the list of 'Table Entries' (This list is produced when you choose 'Check' on the First screen of the Transaction PPCI.
Press the 'Change' button and you will be taken to the 'Maintain Table Views' Transaction (SM30).
Press the Maintain button.
From the list of Infotypes locate the custom infotype created and select the entry for that.
Click on the 'Time Constraint' folder appearing on the left hand corner of the screen.
The screen for Change View Time Constraint would appear.
In the object type field put in: O,P,S whatever is relevant to your requirement.Also add the time constraint.
Save it and double click on the 'Infotypes per object type' folder (on the left hand side again).
Create a new entry here for your infotype and save it.
also.....
First create the structure HRI9nnn for field infotypes and PTnnnn for table infotypes in the dictionary using SE11 tcode.
Activate structures....!!!!
Regards
Vasu
Similar Messages
-
Hi all,
i need to create a new PD infotype so i searched some informations about that.
I recovered the following document :
http://www.sappro.com/downloads/jan07/OMinfotypes.pdf
and i use the following help : http://help.sap.com/erp2005_ehp_02/helpdata/en/42/51c08e4a1211d182b80000e829fbfe/frameset.htm
I created my structure : HRI9100 and activate it. Now go into the tcode PPCI, i put the infotype number and a description, i click on create button. Help SAP : "The infotype copier generates all of the Repository objects that are required for the infotype.". In my case, i obtain a popup with the text "Infotype 9100 cannot be created. Please look at the following log."
Ok i do this. In dictionnary section, only the structure HRI9100 exists, the structure P9100 has not been created, and the table HRP9100 has not been created etc. Nothing has been created automatically.
Help !Hi....these are steps.....reqd...
Enter the transaction code PPCI
Enter a four digit infotype number (9nnn) and an infotype name.
Select Field Infotype
Choose Infotype Create.
Choose Check environment to maintain the required entry in table T777I (Infotypes per object type).
Choose the Entry 'T777I' under the list of 'Table Entries' (This list is produced when you choose 'Check' on the First screen of the Transaction PPCI.
Press the 'Change' button and you will be taken to the 'Maintain Table Views' Transaction (SM30).
Press the Maintain button.
From the list of Infotypes locate the custom infotype created and select the entry for that.
Click on the 'Time Constraint' folder appearing on the left hand corner of the screen.
The screen for Change View Time Constraint would appear.
In the object type field put in: O,P,S whatever is relevant to your requirement.Also add the time constraint.
Save it and double click on the 'Infotypes per object type' folder (on the left hand side again).
Create a new entry here for your infotype and save it.
also.....
First create the structure HRI9nnn for field infotypes and PTnnnn for table infotypes in the dictionary using SE11 tcode.
Activate structures....!!!!
Regards
Vasu -
HT1491 Complete transaction support, please help!
I've looked on support and can't find where it helps you with trying to purchase items in apps, I have been able to do this a couple of times but now it's telling me to contact support to complete transaction, please help.
You have to contact iTune Support
http://www.apple.com/support/itunes/contact/ -
Hi problem with the transaction XD02.please help..full marks given
Hi,
I am running a transaction XD02 and providing the following details.
Tcode: XD02
Customer: J101
Company Code: C800
Sale Org: CJRP
Dist Chan: 00
Divison: CH
<ENTER> and then
Click on pushbutton "Other Communication" - the popup does not include option INT Internet mail (SMTP).it has got other options like fax,pager services,printer,remote mail,telephone but no internet mail.
can anybody help me in adding this functionality.
full marks wud be given for the right person..Hi, customer screens will come depending on our settings in SPRO. we can make them visible or invisible through our settings. Basically SD Consultants do that.
any way. As you are using XD02, find out the customer account group and follow the steps for that account group in SPRO. the seetings will reflect in XD01, 02 and 03 transactions.
But in your case may be you are doing the steps for different account group (sold-to, ship-to, bill-to..etc). You can find account group in KNA1 table.
Save the entries and then check. try using logon again. -
I have problem with account that i can't make update or buy from app store
There is massage appear in my payment page that i must contact with i tunes support to complete this transaction
Please help me to fixe this problem as soon possible
Hany hassan
0096597617317
0096596677186
Thank youYou need to Contact iTunes Support...
Apple Support iTunes Store Contact Us -
To get the transaction data..please help
Hi all,
i need to retrive the transaction datas..like deleted ,n updated datas..
I tried this query
SELECT * FROM FLASHBACK_TRANSACTION_QUERY WHERE TABLE_OWNER='CFMSDEV'
AND TABLE_NAME='M_REGIONS'
but this is givng the feilds of details..not showing a fied what data is translated..
please help me...
thnks®ardsHi,
To my knowledge this can be achieved only by Change Data Capture in 10g.
Let us wait for others opinion.
Regards
K.Rajkumar -
JTA Transaction--please help-----Xid not valid
HI,
I am writing a small application which i am posting at the end.This is decription of my application.I am writing a jsp.Later on i will be using in some other way.
I am using Oracle XA implementation to communicatewith my RM which oracle8.1.7 .
I am creating two XAConnection with two data instances 'test' and 'test3' .These two reside on my local machine in the same database server.
With the code which i am sending you i have tried two cases.
First Case
1)i use only one XAConnection object of say 'test'.
2)enlist its XADataSource with my transaction Object
3) get two connection objects and execute two sql's on themMy code works fine and maintains the transaction.
Second Case
1) I use create two XAConnection objects. one of 'test' and other of 'test3'.
2) enlist their XAResources with transaction object.
3) Now i take one connection from each of XAConnection and execute two sqls, oneon each of them.
It gives me exception while enlisting second XAResource with transaction objeectsaying that "The Xid is not valid".
below is the stackTrace.
javax.transaction.SystemException: start() failed on resource 'oracle.jdbc.xa.client.OracleXAResource':XAER_NOTA : The XID is not valid
oracle.jdbc.xa.OracleXAException at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:483)
at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:190)
at weblogic.transaction.internal.ServerResourceInfo.start(ServerResourceInfo.java:1165)
at weblogic.transaction.internal.ServerResourceInfo.xaStart(ServerResourceInfo.java:1108)
<----------------------CODE------------------------------------------------------>
<html>
<body bgcolor=tan>
<%@page session="true" %>
<%@page import="java.util.Hashtable,java.sql.*,javax.naming.*,javax.transaction.*,javax.sql.*,oracle.jdbc.xa.client.OracleXADataSource,javax.rmi.PortableRemoteObject,javax.transaction.xa.XAResource" %>
<%!
private static XAConnection getFirstXAConnection() throws java.sql.SQLException{
OracleXADataSource oxadsFirst = new OracleXADataSource();
String urlFirst = "jdbc:oracle:thin:@70.7.51.80:1521:test";
oxadsFirst.setURL(urlFirst);
XAConnection xaConnectionFirst = oxadsFirst.getXAConnection("scott","tiger");
return xaConnectionFirst;
private static XAConnection getSecondXAConnection() throws java.sql.SQLException{
OracleXADataSource oxadsSec= new OracleXADataSource();
String urlSec = "jdbc:oracle:thin:@70.7.51.80:1521:test3";
oxadsSec.setURL(urlSec);
XAConnection xaConnectionSec = oxadsSec.getXAConnection("scott","tiger");
return xaConnectionSec;
%>
<%
Context ctx = null;
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL, "t3://localhost:7001");
try{
ctx = new InitialContext(ht);
//javax.transaction.UserTransaction transaction = (javax.transaction.UserTransaction)ctx.lookup("java:comp/UserTransaction");
System.out.println("Before Lookup JNDI UserTransaction and TransactionManager......................");
//javax.transaction.UserTransaction userTx = (javax.transaction.UserTransaction)ctx.lookup("javax.transaction.UserTransaction");
javax.transaction.TransactionManager transactionManager = (javax.transaction.TransactionManager)ctx.lookup("javax.transaction.TransactionManager");
System.out.println("After Lookup TransactionManager......................");
try{
transactionManager.begin();
Transaction transaction = transactionManager.getTransaction();
System.out.println("Transaction Object ----------------------------->"+transaction);
XAConnection xaConFirst = getFirstXAConnection();
XAResource xaResourceFirst = xaConFirst.getXAResource();
System.out.println("xaResourceFirst Object ----------------------------->"+xaResourceFirst);
XAConnection xaConSecond = getSecondXAConnection();
XAResource xaResourceSecond = xaConSecond.getXAResource();
System.out.println("xaResourceSecond Object ----------------------------->"+xaResourceSecond);
if(!xaResourceFirst.isSameRM(xaResourceSecond) )
System.out.println("<-----------------BOTH THE RESOURCES ARE NOT SAME SMAE SAME----------------------------->");
boolean firstEnlistBool = transaction.enlistResource(xaResourceFirst);
System.out.println("firstEnlistBool ----------------------------->"+firstEnlistBool);
boolean secondEnlistBool = transaction.enlistResource(xaResourceSecond);
System.out.println("secondEnlistBool -------------------------> "+secondEnlistBool);
java.sql.Connection firstConn = xaConFirst.getConnection();
Statement stmt = firstConn.createStatement();
stmt.executeQuery("insert into dept values(60,'MARKETING','NEW DELHI')");
java.sql.Connection secondConn = xaConSecond.getConnection();//xaConFirst.getConnection();//
stmt = secondConn.createStatement();
//stmt.executeQuery("insert into account values(20,20)");
stmt.executeQuery("insert into salgrade values(10,10,10)");
if(Status.STATUS_ACTIVE == transactionManager.getStatus() )
System.out.println("Before committing status "+transactionManager.getStatus() );
transactionManager.commit();
System.out.println("After committing");
} catch(SQLException sqlE){
sqlE.printStackTrace();
catch(Exception e){
e.printStackTrace();
} catch (Exception ex) {
ex.printStackTrace();
finally {
try {
ctx.close();
catch (Exception e) {
e.printStackTrace();
} // close finally
%>
<form method="post">
<input type="submit" name="submit" value="Call Transaction Bean">
</form>
</html>
<-------------------------------------------------------------------------------->
please help in this..I am stuck with this and dont kow how to move ahead to remove this problem..
Best Regards
Akhil NagpalHi,
Hi Vicky,
I think we are in different time zones. I am south
korea.I have tried your suggestion but it gives me
the same exception.Yes ,there is a difference of 3.5 hours , I am in India(Mumbai).
This is what i am trying to achieve.
My aim is to create some aplication to which i can
register my XADataSources and this application should
be able to handle the distributed transactions among
them.I will be using the TransactionManager of some
application server.SO i am using weblogic7.0.
For the testing purpose i have creaed a jsp as i
i posted the code. I am very new to this JTA and may
be i am doing wrong.Can you help me this but putting
insights into your experience may be that will
increase my enthusiasm :-) ....
please help me in this.
I am extracting the following from the docs
public interface TransactionManager
The TransactionManager interface defines the methods that allow an application server to manage transaction boundaries.
public interface UserTransaction
The UserTransaction interface defines the methods that allow an application to explicitly manage transaction boundaries
So as per your specs I can understands your application is trying to explicitily control the boundaries of the transaction, so you should use the UserTransction instance to begin the Transaction.My understanding says the TransactionManager will come in picture for declarative transaction and UserTransaction for the your case.I think you have tried that , I would have tried this out here but I dont work on weblogic.Do the things cooly and try to understand the concept.Let me know of the results.
Regards
Vicky -
please help .. when entering billing information its saying i need to contact itunes support about payment review transaction . where can i do this . much appreciated
Contact iTunes using the link provided. Or, use the contact information found on the Contact Us page, the link to which is at the bottom right of every page.
-
Details:
i have 15 dollar but i cant by gem on clash of clansgame
when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction
please help me to solve problemYou will want to contact iTunes Store Support from expresslane.apple.com or call Apple Care to see whats wrong with your billing information or why its being blocked.
-
Details:
i have 15 dollar but i cant by gem on clash of clan game
when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction
please help me to solve problemرائد wrote:
please help me to solve problem
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
i have 292 dollar but i cant by gem on clash of clan game when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction please help me to solve problem
You need to contact iTune Support
http://www.apple.com/support/itunes/contact.html -
i have 99 dollar but i cant by gem on clash of clan game when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction please help me to solve problem agen !!
halep meIf I were you, I would "Contact iTunes support to complete this transaction."
http://apple.com/emea/support/itunes/contact.html -
i have 15 dollar but i cant by gem on clash of clan game
when i want to buy gem this massage appear (your purchase could not be completed contract i tune store support to complete this transaction
please help me to solve problemYou need to Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I have 25 dollars but icant by gem on clash of clan
When I want to buy gam this massage appear ( your purchase could not be completed contract I tune store support to completed this transaction
Please help me to solve problemYou can contact iTunes support via this page and ask them why the message is appearing (these are user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then try selecting Purchases, Billing & Redemption
-
but i have problem in step 13. i can't see step 13 because the red box which has this message " please contact itunes support to complete this transaction" apears. plz help me how can i pass this step
You will need to do what it says, contact iTunes support. Click the Support tab above, then the Get Started link in the Contact Apple Support area and you'll be guided.
Regards.
Maybe you are looking for
-
KP06 is not allowing to post monthly planning.
Hi , I have done configuration for KP06 to upload data from excel sheet. Configuration done. 1) created planning profile in KP65. copy 1-101 to Z1-101 and maintained monthly 1 to 12 period, 2) Assigned Profile in layout Kp34. but planing data is not
-
Can you drag and drop contacts into Pages template?
Older versions of Pages allowed you to drag and drop contact information to a document or template, Can this still be done in newer versions? If so, how?
-
Recently I purchased a Nikon D810 camera and am working through the issues related to software that can handle the RAW files created by this camera. The most recent challenge has been to use the Adobe DNG Converter to convert the Nikon ".NEF" files t
-
Restricting SYS user to View other schema's Tables
Hi All, Oracle DB Version - 10R2 O/S - UNIX Could anyone share docs or steps to prevent SYS user to view other schema's tables; Thanks, Deepak
-
I have 'certificates' in my login keychain that indicate they have 'expired' and I cannot access certain websites. This may be causing me problems with my email as the certificates relate to my internet provider. Would it be o.k. to delete these ex