Transaction type of sales order under Account overview doesnt appear

Hi Experts,
Need help, We are implementing the replciation of sales order from CRM 7 to ECC. Now i already manage to maintain the transaction types and created a link in navigation tool bar.
Now the problem is the assignment block of sales order and quotation under account information create new button doesnt appear the transaction types i maintained under CRM->transactions->settings for sales transactions->define profiles for ERP transactions. and the sales order created doesnt appear on that assignment block as well..
Any suggestion or ideas is welcome.. thanks in advance
best regards,
etrafanob

Hi Etrafanob,
New button on sales order assignement block in account overview page shows the list of transaction types which are maintained via below customizing.
Spro->Customer Relationship Management->Define Transaction Types..
All the transaction types which are active and defined in leading transaction category "BUS2000115 Sales" for the same Channel will be displayed.
Not sure if defining those transaction types under erp sales order will help in this scenario..
Hope this helps..
Cheers,
Sumit Mittal

Similar Messages

  • Error in Sales order - Consumption account not found

    Hi Gurus,
    I am facing an error in Sales order - 'Consumption account not found'. The scenario is third party. In sales order, it says 'Consumption account not found'. the item category is TAS and scedule line category has general modification key 'VKA'. And as it is third party, thr is no movement type for the schedule line category. The valuation  class of the material is 3334 (software services). I was thinking In OBYC, under GBB key, this combination of my val. grping code+ 3334 + VKA and relevant GLs shud exist.
    But in my development client, i dont get any error for the same material. And in thr also, thr is no mention of entry like above combination in OBYC. So its making me think that its not config error. But its an issue of master data or GL data.
    Please help me . This is critical.
    -Prashant

    Hi,
    Your observation is perfectly write, the possible errors are
    1.  Check the combination of Account modifier of Purchase order account assignmnet or PR.  Based on the modifier and check the relevent combination in OBYC
    Valuation ClassAccount ModifierIf Groups is there + Transaction Event Key + Gl Accounts
    2.  If GL Account is available then check the GL Master through FS00 for validation of mandatory consumption is required and i feel there is no issue with material master.
    Rewards if it helps
    Regards
    Goutham

  • Map information from Sales Order to Accounting document

    I have a requirement where I need to map the information from the customer material number(VBAP-KDMAT) in the Sales Order to the BSEG-SGTXT field of the accounting document generated for the subsequent billing document billing document created for the sales order. This is an order related billing process.
    Any help would be appreciated.
    Thanks,
    ALAM.

    Transaction Code - VA01                     Create Sales Order
    Exit Name           Description
    SDTRM001            Reschedule schedule lines without a new ATP check
    V45A0001            Determine alternative materials for product selection
    V45A0002            Predefine sold-to party in sales document
    V45A0003            Collector for customer function modulpool MV45A
    V45A0004            Copy packing proposal
    V45E0001            Update the purchase order from the sales order
    V45E0002            Data transfer in procurement elements (PRreq., assembly)
    V45L0001            SD component supplier processing (customer enhancements)
    V45P0001            SD customer function for cross-company code sales
    V45S0001            Update sales document from configuration
    V45S0003            MRP-relevance for incomplete configuration
    V45S0004            Effectivity type in sales order
    V45W0001            SD Service Management: Forward Contract Data to Item
    V46H0001            SD Customer functions for resource-related billing
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
    No of Exits:         15
    Reward points if find useful..........
    Regards,
    Minal

  • Extension of input fileds in Sales order for account assignment

    Dear Gurus,
    Can anyone tell me how to extend input fields like Statistical order(COBL-AUFNR)  and cost center(COBL-KOSTL) in sales order for accounting assignment and these fields have to be ready for manual entries. The order types are ZHGA and ZHV.
    Which program has to be modified and how it can be modified?
    Thanks a lot for help and advice.
    Cheers,
    Ricky
    Edited by: Ricky.Martin on Apr 23, 2010 10:45 AM

    Dear Rajendra,
    There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
    Definitely material Tax classification will influence to determine the Tax code.
    -->So Make sure that customer and material master having proper tax classification indicator.
    -->Have you Update the price after changing the tax classification in the sales order.by going to item dat -->condition tab then click on Update push button bottom of the conditions screen.
    -->Once again the check the condition record maintanence also for your MWST access sequence.
    I hope this will help you,
    Regards,
    Murali.

  • How to Avoid Duplicate Pricing Condition Types In  Sales Order and Billing

    Hi SAP Gurus
    I have a requirement in Pricing (Sales and Distribution). We have  issue duplicated condition types in Sales order and it causes wrong posting in to accounts.
    I want make them inactive duplicated Condition type in Sales order and Billing Documents.
    Please advice me how to make inactive status to duplicated Condition types
    Thanks  in Advance.
    Ravikanth

    Hi
    You can use Exclusion Group
    You can define 2 Groups and include 1 condition type in each
    and define exlusion procedure
    A   Best condition between condition types                
    B   Best condition within the condition type              
    C   Best condition between the two exclusion groups       
    D   Exclusive                                             
    E   Least favorable within the condition type             
    F   Least favorable betweent the two exclusion groups     
    you can use Exclusive to set your condition type or as per your requirement
    Regards
    Jitesh

  • Manual Condition type in Sales Order

    Hi,
    i need to enter a manual condition type in sales order which should come in % and the value should not come or it should come as zero, Is there any way to make that manual condition value as Zero in sales order.
    Ragu

    Raghu,
    Pls check the OSS notes 392668, that will solve your problem.
    The same pasted here for your reference. However, I advise you to download it and then read due to inconsistent formatting here.
    Reward if this helps.
    When you create documents in which the standard pricing is used to determine condition records as well as to calculate a pricing result, the display and entry of manual entries is not clear in the relevant condition screen (screen 6201 in the SAPLV69A or SAPMV61A programs for releases prior to 4.6A).
    This note explains the interaction of manual entries with the attributes maintained in the pricing procedure and in Customizing of the condition type.
    Other terms
    KAUTO, V/06, V/08, KAEND fields, KOZGF, PRICING_CHECK, LV61AU08, XKOMV_ERGAENZEN_MANUELLE, LV61AA53, manual entries, MANU
    Reason and Prerequisites
    In the pricing Customizing, the following fields affect the manual entry of complete condition lines or individual condition rates:
      Description        Technical name              Maintenance transaction in SD
      Access sequence    KOZGF                  V/06 and V/07
      'Manu'            KAUTO                  V/08
    Depending on the characteristic of the mentioned fields, the pricing condition screen appears as follows:
      KAUTO   | KOZGF    | Condition record existing on DB? | Result
      Initial | Initial   | -                                | (1)
      Initial | Existing  | No                              | (2)
      Initial | Existing  | Yes                              | (3)
      Set     | Initial   | -                                | (2)
      Set     | Existing  | No                              | (2)
      Set     | Existing  | Yes                              | (4)
    Result (1)
    A condition line is set for the relevant condition type [KSCHL]. The 'Condition rate' field [KBETR] does not contain a value, but is ready for input. The displayed line serves as an input help or a template for the manual entry.
    Result (2)
    No relevant condition line is set on the pricing condition screen, in other words, the condition type is missing.
    If you enter the condition type manually without entering a condition rate in the same processing step, you get a 'template line' as described in (1).
    Result (3)
    A suitable condition record that exists on the database is set with amount (= normal, automatic determination).
    Both the 'Condition origin' indicator [KHERK] and the 'Condition control' indicator [KSTEU] are set to 'A'.
    If you create another line with this condition type and enter a condition rate not equal to zero, a line is set with this condition rate.
    The 'Condition origin' indicator [KHERK] as well as the 'Condition control' indicator [KSTEU] has characteristic 'C'.
    If, on the other hand, you create another line and enter a condition rate of zero (or do not enter any condition rate) and the condition record that exists on the database has a scale, the system sets the condition rate according to the achieved scale level. If zero is to be set as the condition rate even if scales exist, then use modification Note 179354. If no scale is maintained, then the system always sets zero as the condition rate.
    In these cases, the 'Condition origin' indicator [KHERK] has characteristic 'C', the 'Condition control' indicator [KSTEU] characteristic 'A'.
    Result (4)
    No relevant condition line is set on the condition screen, even though a condition record suitable for the access sequence exists on the database. The pricing analysis displays the message "Manual condition (Condition record exists)". If you enter the condition type manually without entering a condition rate in the same processing step, the record that exists on the database is set. If a condition record has a scale, the system sets the condition rate of the first scale level independently of the achieved scale level.
    In this case, the 'Condition origin' indicator [KHERK] has characteristic 'C', the 'Condition control' indicator [KSTEU] has characteristic 'A'.
    Thus, the setting variant leading to result (4) serves to suppress the setting of automatically found condition records into a pricing result. However, you can add the maintained record to the already determined pricing result by entering the relevant condition key.

  • Exchange Rate type in sales order

    Hi,
    can we see exchange rate type in sales order.
    regards
    sachin

    Dear sachin
    Yes in VA02, select Goto - Header - Sales.  Here at the bottom of screen, you will see a tab "Pricing and Statistics" under which, there is a field "Doc.currency".
    Thanks
    G. Lakshmipathi

  • Default document currency as per document type for sales order

    Dear All,
    We are facing problem in Default document currency as per document type for sales order,
    Our requirement is not to give currency in customer master & set it as default document currency as per document type,
    for example: Document type 'OR' default currency 'INR',
                         Document type 'ZEU' default currency 'EUR',
                         Document type 'ZUS' default currency 'USD',
                         Document type 'ZNP' default currency 'NRP,'
                         Document type 'ZAF' default currency 'RAND,'
    Is it any how possible in standard setting ?,
    Regards,
    Sai

    Hi,
    The system proposes the sales document currency from the customer master record of the sold-to party. You can change the currency manually in the document or change in currency in customer master. If you change the currency, the system recalculates prices for the entire document.
    to determine different currrency in sales docuement you need to write an user exit and then overwrite the docuement currency copied from customer master. Try user exit 'USEREXIT_MOVE_FIELD_TO_VBAK' under include MV45AFZZ for this change.
    with regards
    vivek.

  • Transaction for Open Sales Orders

    Hi Experts
       can u let me know the Transaction for Open Sales Orders.
    Regards,
    kumar

    you can check the tcode
    VA05.
    vijay

  • VA01 Sales order - Header-- Accounting tab need to add a field

    Dear All,
    The requirement is,
    1. I need to add a field in Sales order.
    Path for the same is as follows:
    VA01> Goto> Header--> Accounting tab
    2. The field will be a date field that needs to calculate date on.
    a)create a new field. ex - zchdt (chq due date)
    b)when customers enters value in Assignment,
    i.e vbak-zuonr
    after that trigger logic is
    3.vabk-kunnr = knvv-kunnr
    a)sy-date + knvv-kvgr2 (exclude sundays)
    example - 14 sept + 30 days = 14th october
    should populate value - 14th october i.e. field (zchdt)
    4. This activity needs to be triggered before the sales order is saved.
    kindly know whether this is possible or not.
    if possible how & which exit & also with example code.
    if you could give me your contact(cell no).
    Regards,
    Nagendra D.S.
    Mobile - +91 9819899082

    Hi All,
    VA01 Sales order - Header--> Accounting tab need to add a field. field name - zchdt(cheque due date)
    when customer enters value in Assignment i.e zuonr & after that trigger logic is
       1.     vbak-kunnr = knvv-kunnr
       2.     sysdat + knvv-kvgr2 (exclude sundays)
    example - 16 sept + 30days = 16 oct
    in field zchdt value 16 oct as to populate
    Pls help me in the code.
    Regards
    Nagendra

  • Unconfirmed line items of a sales order into account in credit management

    Hi Gurus
    Updated the customer orders via prog. RVKRED09.
    There is only one open order for this customer = 720662. My question is: in the credit master the sales value/credit exposure is USD 77.100,00. The order is for USD 105,900.00 .
    Found out that line item 20 is not confirmed in the schedule lines. So the value in the sales value/credit exposure  equals item 10 and 30. So my 1question is: Where is the setting that  does not take unconfirmed line items of a sales order into account in credit management?
    Thanks in advance
    Regards
    Nalini Iyer

    Hi nalini
    Even though , you create a sales order for that line item , but if that item is not confirmed then the value  wont be considered.  into credit exposure. .
    But once it gets confirmed then the value will be taken into credit exposure..
    Regards
    Srinath

  • Forgot to put ZPNT (Penalty condition type) in sales order

    Dear Expert,
    We have created sales order and billing document has been sent to customer,after that we came to know tht we forgot to put ZPNT Condition type in sales order. Now i want to create another sales document with reference to billing document, in which only ZPNT Condition type will be appear (not other condition) and thn will create billing document with reference to new sales order so that ZPNT amount goes to the right ledger A/C......Is it the right process to solve this problem if yes thn please advise me how to fonfigure the system.
    Regards
    Parul Deshwal

    hi Parul,
    rather than doing this which is quite complecated process
    saying complecated because, when u do Copy from billing to sales document all condition will appear and might be there r some mandatory conditions in pricing procedure which you can not remove.
    Above all, IF your condition ZPNT value is based on some other conditions then also it will not be possible for you to calculate it correctly.
    there is one more possible way by creating DEBIT NOTE with reference to sales order but again you might have to face above mentioned problems
    So better you follow standard and easy method
    1. Reverse the billing document if PAYMENT is not posted
    2. Reverse the Delivery (if any)
    3. add your condition type to sales order for line item and create it
    Regards

  • Requirement type in sales order

    hi sap gurus,
    i want to know how requirement type is configured and how it conmtroll the scenario in MAKE TO ORDER scenario. previously i have seen that with requirement type in sales order Procurement tab, system determine the planning statergy and it determine the special stock type of material, e.g. E for sales order stock and Q is for project stock. but i want to know whether this is correct or not and how this is happenning i.e. what is the configuration and assignment.
    please help at earliest.
    biplab rout

    Hi,
    Check this thread
    Re: Requirement type
    Re: requirement type and requirement class
    Thanks,
    Raja

  • Purchase order type in sales order header

    Dear Friends,
    how can I make purchase order type in sales order header be default.
    With regards

    Hi Vamsi,
    if you want to enter a default value in the purchase order type field in sales order header, then do it by either of the ways
    1. by variant tcode SHD0
    2. by USEREXIT_MOVE_FIELD_TO_VBKD in program MV45AFZZ
    regards,
    Santosh

  • How can prevent duplication of condition types in sales order??

    How can prevent duplication of condition types in sales order.
    While we want Amount field Changeable by user.
    Please give me solution.

    Dear Rohit,
    Can you explain your scenario in detail with an example or any screen shot so that we will help you in easy way ...
    Regards,
    C.B Reddy

Maybe you are looking for