Transfer cost & revenue to internal order defined inthe service order.

Dear Experts,
On release, service order creates internal order that collects cost & revenue for the job. My requirement is to transfer these costs & revenue to a different internal order through crm order itself. In CRM order there is option to assign the account assignment object as " Internal Order ". This is under tab Account Assignment. Here we can enter any internal order no.
On saving order doesnt throw any error message. But Cost & revenues are not transafered to the I/O mentioned in the CRM service order.Is there any config. setup missing or should we look for BADI enhancement.
Can anyone help me in fixing this issue Plz. Your early response would be most appreciated.
Thank U,
Regards
Devika.S

Hi,
Just to get cleared, have you set up a Billing Engine in CRM and also the Administrate Console for Billing to flow in CRM with Middleware settings + Item Category (Billing Relevance)
Cause the above are very necessary for your requirement.
Apart from those, in ECC, you need to maintain values under
IMG>Integration with other mySAP.com components>CRM>Settings for Service Process>Billing Integration
Hope this information helps, as I am assuming it that others are maintained by you.
Regards,
Madde

Similar Messages

How to Transfer Cost From an Internal Order to Another Internal Order

Dear Sir,
We had one Internal Order opened for Asset Under Commission (AUC) . We also had opened another Internal Order and cost were booked in this Internal Order also .
Now , we want to transfer the complete cost from 2nd Internal Order to 1st Internal Order . During the Transfer , we want to maintain the same GLs (i.e in 2nd Order the GLs get credited and in 1st Order the same GLs must be Debited)
Pl guide us , how to transfer the cost .
Regards
B Mittal

You can do a regular FI posting debiting and crediting the same account, with a different internal order in each line item.

How to transfer cost from old sales order (cancelled) to new sales order

Hi Gurus
I want to know, how to move cost from one sales order to another sales order.
SD created sales order before 1 month and there was production order behind this. Production was completed and all the cost was moved to sales order and also SD has raised invoice on customer. This transaction was completed.
The above order was rejected by customer due to some changes in the order. SD raised another sales order and production order was created to to additional work. Production transfered above stock (produce before on old production order) to new production order.
My problem is stock is now transfered to new production order but cost is still sitting on old sales order. How do I transfer cost from old sales order to new sales order. SD cancelled old invoice and raised new one with full value (old + new work) on new sales order. Now cost is on old sales order and revenue is on new sales order.
Please help.
Thanks

Hi
I have reverse the sales order settlement, PP order settlement to sales order and I have also done KB11N for transfering the cost to the new production order.
The only problem is I was unable to transfer labour hour confirmation as cost element used for this are not for transfering cost. If I will reverse the confirmation in PP order system will reverse material movement also which I don't want any more. Can you please tell me how to I reverse the Labour hours with out affecting goods movement?
Many thanks

Report showing total costs pr. cost center and internal order..

Hi FI Gurus,
Do any of you know a standard report, which can display G/L, Company code, Period, total cost in local currency, cost center and internal order. The report should be at summarizational levet (not line items) and we should be able to sum costs at cost center and internal order.
Finally we should also be able to transfer the report to BI via an extractor etc.
Thanks for you help
Pernille

Hi,
Cost Centre vise Report you can take from KSB1
Internal Order Vise Report you can take fro KOB1
Regards,
Sridhar Sha

How to post the revenue to internal order

Hi guyes:
Please can anyone tell me how to post the revenue to internal order when i invoicing using VF01.
i have already tested,i enter the internal order in the TAB 'Account assinment' when VA01.
but i seem to post the sales cost to the internal order but not revenue.
Can anyone tell me how to resolve it?
Thank you!

Hi,
You seem to be doing the right thing. Once you have posted the billing document. Can you please go to vf02 and check in the item detail tab if the internal order you have entered in va02 is there.
Thanks
Rachelle

Impute revenue to Internal Order from SD

Hi Experts,
Is it possible to impute revenues to Internal Order from SD? Is necessary some configuration?
Thanks in advance.
José Luis

If your cost of sales account is not setup as a cost element (which it shouldn't be if you are using cost based COPA), then you will need to created another cost of sale G/L account which does have a cost element and use that account for this transaction. The G/L account that is selected for cost of sales is based on the movement type selected in the sales transaction and the valuation class assigned to the material.
The easiest way of having the system find a different G/L account for this is to use a material in the sale transaction with a different valuation class that can be assigned to this new G/L account. You can use transaction code (FBKP) to assign the G/L account to the correct account modifier for that valuation class.
If you can't use a different valuation class (because this material is used in other situations as well), then the process is more complicated. You will need to have the sales transaction find a different movement type for this so that you can assign a different account modifier and G/L account. You will probably need to work with your S/D consultant to make this work, but I'll take you through some of the steps.
In the standard system, movement type 601 is usually used to issue the inventory against the delivery and record the cost of goods sold accounting posting. The trick here is to assign a different movement type to this speicific transaction. The movement type is assigned to the schedule item category that is assigned to the sales line. The schedule item category is derived from the item category, so you may need to have your S/D consultant create a new item category, a new schedule item category, and a new movement type for you. Now that you have a new movment type, you assign a account key and modifier to the movment type. From there assign the correct G/L account to the account key and modifier for your valuation class.
thanks,

Reasons for not up dating the planned revenue in internal order

Dear   CO experts
What are the probable reasons for not up dating the the planned revenue in internal order . Eg : The order   value in CRM order is not flowing to the planned revenue in   internal order . The GL has been defined for the same in ECC and CRM .
What are the points to be checked if the planned revenue does not update the internal order.
Where can i find the documentation for the settings of CRM    to ECC controlling.
Regards
Raj

Hi,
Check in KOT2_OPA corresponding to your order type whether 'Revenue posting' is flagged.
With regards,
Mrinal

PM Order Settlement to Cost Center(real) & Internal Order simultaneously

Dear Experts.
I have a request from client to settle 100% of PM order to Cost Center (real) and internal order (statistical) simultaneously. The purpose of statistical orders is to capture all the expenses (electricity, water, security charges, maintenance, etc...) location-wise.
PM Order settlement through statistical IO will contribute to the maintenance aspect, and other expenses will be captured to statistical IO through financial GL posting. Hence each location will have a unique statistical order maintained.
In the settlement Profile, I have maintained Order and Cost Center elements as "Settlement Optional" Under "Valid receivers". But the system doesn't allow this settlement. As per my understanding SAP allows settlement (100%) to go only to a single object.
Appreciate your inputs on this matter.
Thanks,
thushantha.

hi,
Please check how you maintained the real object in the settlement rule.
You must maintain both the cost center and internal order on the same assignment line such as:
CAT:     Settlement receivers
ORD      ORD_Number   Cst_Center_number         100%   PER
The system will correctly generate KI178 if you have the following:
CAT:     Settlement receivers
ORD      ORD_Number                              100%   PER
CTR      Cst_Center_number                       100%   FUL
regards
Waman

Cost and Revenue of Internal Order

Hi
The table for internal order master data is AUFK
but when we assign internal order to sales order and subsequently revenue and cost are booked ,it is accumulated in the same internal order
In which table do we find the actual cost and revenue for the internal order
Thanks and Regards
Sunil

hi..
For internal order level expenses elementwise please use table COEP. Earlier one i mentioned for Material Ledger related cost componant split.
thanks
kkumar

Error while posting revenue to internal order

Hi
I made an internal order for income and tried to post the revenue in that but an error is coming, That is :
Order 100040 cannot carry revenues
Message no. KO014
Diagnosis
You have tried to post an order, which is not allowed to carry revenues, under a revenue element (or the system determined the order automatically).
The field "Revenues" in the order type determines whether revenues can be posted to an order or not. Orders carrying revenues cannot be settled to a cost center.
System Response
Order 100040 cannot carry revenues.
Procedure
You can either
enter a different order.
enter a different cost element (not a revenue element).
After that i changed the tick to the revenue also but it was not solved. please guide.
Thanks

hi
i have put a tick on the revenue posting in the control indicator and settlement profile there is Gemeinkosten- 20.
Can u tell me that where i have to select revenue for the posting and which profile shall i select, because this profile is not suitable for the revenues.
Thanks for the reply.

Can we create a Budget & Availability Control for revenues with internal orders?

Dear SAP Gurus,
I have created an expense budget with the help of an internal order and have assigned the same to an expense GL (cost element). I have done all the necessary system settings and the system gives an error message when the F-02 document posting exceeds the budget.
My query is, I want to replicate the the above for revenue postings. I have done the same system settings for revenue posting however the system does not give an error when the budget amount is exceeded.
Can I please get some assistance with this requirement?
Best Regards,
Akshay

Hi Akshay,
System will not give the error in the case of Revenue GL. Because all the revenue GL will be hit for credit. It means it will update negative against the budget available. It means
Current Budget-(-Revenue Budget)= Current Budget + Revenue Budget= Available Budget
Because of this system will never give the error.
Regards,
Ankit Agarwal

How to use multiple cost centers with internal order for PO

Dear Gurus,
I have one issue.
For indirct purchase with posting over internal order, my client wants to book good reciepts over different cost centers.
Thanks In advance
Regards,
Sameer

Hi Sameer,
For the scenario you have mentioned, you need to check the account assignement at the PR/PO wherein
you can take Cost center as actual object & internal order (statistical) as assignments.
At the time of Goods receipt the system will the automatically post to Cost center with a statistical posting to Internal order.
You have the second option of maintaining account assignment at time of PR/PO as Inetrnal order only (Actual) & then at the month End you can settle the cost to multiple Cost centers by defining the settlement Rule. For Eg. At the time of settlement you can post 20% to Cost center "A", 50% to Cost center "B" & 30% to Cost center "C".
Assign points...if useful.
Regards,
Amol

Report Writer Missing Data for Cost Center+Investment Internal Order

Hi Gurus,
I have met a problem on Report writer. T-code KSBB -> Report for Cost Center Group by Cost Elements in diff months.
The report can be drilled down to call KSB1 to give line items on the cost element by cost center/group.
The problem is the drill-down report missed the line items for investment orders. ( Compared with manually use KSB1)
The overhead internal order line items are fine.
For example, document 001-Apr:
Dr. Cost Element 1009                 $900 -- BA 90 Cost Center 90000 Investment order 9001
     Cr. Other cost elements.                  $900
Document 002-Apr
Dr. Cost Element 1009                 $800 -- BA90 Cost Center 90000 Overhead order 7001
     Cr. Other cost elements                      $800
In KSBB report, the cost center group for 90000 in cost element 1009 in Apr only has $800.
And the drilled down report which called KSB1 has the line item for docuemnt 002.
However, when I run KSB1 directly, the total amount for cost element 1009 in cost center 90000 is $1700.
Here is what I checked:
1. I have my ABAPer checked the KSBB program and KSB1 program to debug them in DEV ( DEV and PRD has the same problem). The different to get the data is that in KSB1, it has selected a value type 11 ( Googled: field name is WRTTP, Down payments as expenses. In program: WRTTP means Statistically Actual ) and 04 ( Googled: Actual True Posting. In program: 04 in WRTTP means Actual posting).
But in KSBB, it only select 04 when I clicked the drill down report to call KSB1.
2. I am thinking that the cause was on different types of internal order:
Overhead internal orders are statistical orders. Investment orders are actual orders.
Could you help to throw some light on the problem?
Thank you very much.
Emma

Hi,
Cost Centre vise Report you can take from KSB1
Internal Order Vise Report you can take fro KOB1
Regards,
Sridhar Sha

Cost Center and Internal Order report

Hi,
We are trying to design an account structure using Cost centers and statistical Internal orders. So any invoice would be booked on REAL Cost Center and a STATISTICAL Internal Order. Can I pull up a report based on the cost center and also the internal order?
Our other requirement is to report the values on the statistical internal order along with the values on a profit center ( can be any profit center belonging to the company). Is there any way to develop a report using special purpose ledger or ABAP that can achieve this requirement.
Any help on this issue will be greatly appreciated.
Thanks and Regards,
Venkat

In t code KOB1 - Order line items, you will get details of cost center as well. For this you need to display field Aux. acct assignment_1.
Regards
Rakesh Pawaskar

Restricting Cost Elements in Internal Orders

I am setting up new order types for our Marketing Department. I want to ensure the only costs charged there are Marketing Costs (ie a small range of Cost elements). I've put the range into the allocation structure, but that only seems to control settlement cost Element, and doesn't stop anything I don't want coming in to the order.
Is it possible to restrict postings coming in to a range of Cost elements? Ideally, this would stop the problem at source i.e. you can't raise a Purchase Order assigned to the Internal Order with a cost Element outside the restricted range?
Is this possible? If so, could you kindly point me in the right direction?

Hi gbrandreth,
Allocation Structure, as you correctly understood, is only for Settlement transaction.
Pls try to use "Validations" for your requirement.
Srikanth Munnaluri
Edited by: Srikanth Munnaluri on Mar 18, 2009 2:57 PM

Transfer cost & revenue to internal order defined inthe service order.

Similar Messages

Maybe you are looking for