Transfer of cenvat credit to other plant

Hi,
I have a plant AAAA.I have recieved raw materials and availed cenvat credit.
Now I'm transferring the material to other plant BBBB.
Is it possible to transfer the cenvat credit availed in plant AAAA to plant BBBB.
Regards,
Venkatesh

Hi Lakshmi,
During intra company STO process,when materials are transferred does the cenvat availed at one plant is transferred to other plant?
FI consultant is not clear on this so i posted.
So kindly request you to transfer this post to FI forum if it is not relevant to MM,as i don't know how to do it.
Edited by: Venkatesh DY on Jan 18, 2012 11:54 AM

Similar Messages

STO- Depot to Plant with Transfer of cenvat credit

Dear All,
I am having a scenario in which i am procuring capital material for depot and it lies in depot.
Now the material is no use in depot and i want to transfer that material from depot to manufacturing Plant.
and want to take the cenvat credit in manufacturing plant with respect to initial excise posted at depot.
Now i created a STO and done the PGI. Create & POST the excise invoice in depot-J1IJ.
But i am not able to capture excise invoice in MIGO in manufacturing plant.
So how to transfer the material from depot to manufacturing plant with transfer of cenvat credit.

Hi akshay,
Follow this flow you can Transfer of cenvat credit.
--->ME21N
--->VL10B
--->VL02N
--->J1IJ
->VF01Proforma invoice (At depot plant)
--->MIGO(At Mfg Plant)
--->JV using T-code J1IH (To transfer cenvat credit to Mfg plant)
Thanks,
Swamy H P

Manufactured goods transfer to other plant

Hi
We have following scenario
Forecasting is done in APO-DP.
MRP is done in APO-PPDS which creates Pur Req for certain product and this product is produced in other plant. Production happens in R3
After completion of product as there is space to store product, it needs to be transferred to ordering plant.
Both plants are under same company code.
Please guide how to map this

Dear Mayuresh,
If I understood your requirements correctly then this can be met by using special procurement key 80 in
the material master MRP2 view.But the standard behavior is in such a way that as soon as the GR is
done in the Production plant then the stock will get posted in the planning plant.
check this thread to explore more,
Re: Production In Alternative Plant
But only if you want to transfer the stock from the production plant to the planning plant in the form of a
STO process,then special procurement key 40 will be more suitable for this process.
check and come with your queries.
Regards
Mangalraj.S

How to transfer all materials from one plant to other plants?

How to transfer all materials from one plant to other plants?

Hi
To transfer stock in one step between plants belonging to same company code use movement type "301" and using transaction code "MIGO". IF you like in two step it helps to monitor stock in transit use movement type "303" and "305".
303 Transfer posting plant to plant in two steps - removal from storage
305 Transfer posting plant to plant in two steps - placement in storage
to transfer stock between plants of diffrent company code go for stock transpor order using tcode "me21n"
hope it helps

Cenvat credit of Capital goods

Hi,
From the last year 2011, I heard that the cenvat credit for capital goods can be taken 100 % in the first year itself.
How to the make the changes accordingly so that the 100 % tax amount goes to cenvat account instead of posting 50% to cenvat account & 50 % to cenvat on-hold account and then doing J2I8 to transfer of credits from cenvat on-hold account to cenvat account.
Regards
Madhusudan

Any solutions??
regards
Edited by: madhusnb4 on Jan 23, 2012 1:27 PM

Posting of cenvat credit of 50% on capital goods through T.Code:J1IH

Hi
Please advise me the procedure for posting of cenvat credit of 50% on capital goods through T.Code:J1IH.
As a matter of fact, when i tried to post the last year credit of 50% cenvat credit on capital goods the system accepting 50% only.
For example, last year we got Rs.200000 as cenvat credit and out of that 50% credit of Rs.100000 got availed last year. In this year when i tried to avail of remaining of Rs.100000 through transaction code J1IH system is accepting 50% of Rs.100000 i.e only Rs.50000 is accepting.
I look forward for your reply
Thanks and Best Regards
Shekhar
Edited by: Shekhar Yecham on Sep 16, 2008 8:54 PM

Hello,
The settings before 01.04.2010 were same. However, after thorough checking of the GL A/cs, I have following observations -
1) Plant 1 - Balance as on 31.03.2010 in Cenvat on Hold A/c -Rs. 195080. It is upload balance & t.code used is FBVB
    There are some more transctions in this A/c which are reversed due to wrong entries.
    Balance in Excise Duty RG 23 C as on 31.03.2010 - NIL
2) Plant 2 - Balance in Cenvat on Hold A/c as on 31.03.2010 is Rs. 166701. Again this is an upload balance with FBVB
    Balance in Excise Duty RG 23 C as on 31.03.2010 - Rs. 56931.62
3) Plant 3 - No upload balance. All the transactions are routed through J1IEX except 1 from FB01
    Balance as on 31.03.2010 - Cenvat On Hold A/c - Rs. 86876.06
                                                 ED RG 23C - NIL
Hence, would like to know -
1) Any separate procedure to take the credit of upload entries?
2) If the Balance in ED RG 23C A/c is NIL, will it affect on taking credit?
Thanks & Regards,
Reshma

How to transfer 50% modvat credit in next fiscal year

Hi,
Please tell me how to transfer 50% credit next year for capital goods-RG23C-Part-II regarding modvat/cenvat
Thanks,
Dharmveer

Hi
you have to run J2I8 t-code to transfer 50% modvat credit in next fiscal year.
After execute that t-code select excise invoice and click on Transfer Credit button .
After Transfer Credit you can find those amount in J2IUN (monthly Utilization)
Regards
Tanmoy

CENVAT CREDIT 100% TAKEN IN CASE AED ON CAPITAL GOODS INSTEAD OF 50%

Hi Experts,
This is with reference to the Cenvat Credit taken on Additional Excise Duty Payable on Capital Goods.
Presently in SAP 100% Cenvat Credit has been taken into 26010713 CENVT CAP GOOD (CAD) but as per law 50% Credit should be taken in the same year in which
Duty has been paid and balance 50% should be taken in next year.
The same treatment has been taken correctly in excise records.
And i want to know only for imported there has been any law change regarding 100% credit should be paid in same year.
Regards,
Manjax

Yes, this is std behaviour of the system,as per the law the AED will be allowed to take 100% credit in first finanacial year only.
For more information refer the below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/808c60ca-013b-2c10-34a2-94d1eb442e6f?quicklink=index&overridelayout=true

Inspection Lot Not Triggered for STO - One Plant to other Plant in same Company

Dear SAP Gurus,
We have a scenario of STO for one plant to other plant with in the same company code.
The process is being followed as follows ;
1. We create stock transfer by creating P.O thru ME21N
2. Create Outbound delivery thru VL10B
3. Doing PGI & Picking thru 'VL02N. Thru movement type '641'
The QM settings are as follows to trigger an inspection lot
1. Inspection lot origin '08' activated in MM.
2. Quality plan is defined and task list is released.
3. 'VL02N' is defined thru 'OMJJ' for movemrnt type '641'.
But while doing PGI no inspection lot is created.
Our requirement is to trigger a inspection lot and Invoicing / Billing only possible after inspection lot Approval.
Please advice.
Thanks

Hi
As per my understanding inspection type 10 should be activated in QM view material master.
Can you please check the below thread and also check some similar threads.
QUALITY INSPECTION FOR OUTBOUND DELIVERY
I hope your problem will be resolved or else revert with your observation.
Regards
D Mohanty

Transfer posting Quality to Quality within plant ..mov type 323...

Hi All,
I am not able to process Transfer posting Quality to Quality within plant with mov type 323 through MIGO transaction.
Error : Change the inspection stock of material 936317 in QM only.(Change the inspection stock of material 936317 in QM only
Message no. QA495
Diagnosis
You want to make a stock posting to/from the inspection stock. This is not allowed for material 936317 because the quality inspection control has been activated by QM.
The following cases can occur:
The inspection stock should be increased, although an inspection is not foreseen for the current goods movement
The inspection stock should be released, although you can only do this using the QM transactions.
System response
You cannot carry out the stock posting.
Procedure
Check both the QM inspection setup data and the movement type for material 936317 in the quality management view of the material master.
Exception:
If you post a return delivery to a vendor with reference to a purchase order, or cancel a goods receipt, the stock indicator from the order is proposed.
Check and modify this proposal as required.
The stock may have been transferred already and is therefore no longer in inspection stock.
Kindly help me to resolve the issue.

Hi,
Please check the stock of material 936317 in MMBE , One lot will be in Quality Inspection.
Clear the lot to unrestricted lot
try now you will be able to do Transfer posting Quality to Quality within plant ..mov type 323
G.Ganesh Kumar

Cenvat credit of additional duty of customs

As per importer    price of 10 units
Basic       100
Excise       10
Ecess         2
Shecess     1
AED            4.52
We bought   5 units from him   we treat it as a case where tax code inclusive of all duties where a backward calculation is used in conditions in Purchase order.
problem is that we are purchasing a capital item.
duties cenvat crdit available for different duties other than AED is 50 this year and 50 % next year. For AED 100 % cenvar redit should be available but that is not happening.
what I saw in one of SAP notes is to make a MM condition ZADC and activate AED in tax code but that doest not help to get AED credit avilable 100 %.
other SAP note 943767 tells a different steps for ADC.
what should we do in this case i.e what all sap notes should be checked for in system so that we can get 100 cenvat credit of AED passed on by first stage dealer of Imported goods in india using a backward calculation situation.

Hi
What pack level are u on
and if u using ECC 5 and Above , than i dont think u have to use any sap note.
In po u will have to use tax code that is have 0 % for your AED condition and 100% for AED condition total.
just like bed or ecess condition.
When u capture Excise duty for first stage delear haveing ADC , u will have to put IP in Addition excise tab near GRPO.
and in item leve material type should be other than raw material , Assect or consumables or tools.
hope u have configured IP for account determination
Onlt the trick to get 100% cenvat credit for First stage delar is to Put IP in front of GRPO and just check if u are able to c CVD indicator if it is there u have to tick that too.
hope this solves your issue

Cenvat Credit taken based on service tax registration

Hi Gurus,
My client is in the service industry ( oil exploration work for ONGC)
Now when client procure the material, he paid the excise duty and take the CENVAT credit against service tax.They does not maintain the excise register like RG23A & RG23C.
They required one report for take the cenvat and wants the entries of excise duty into separate GL instead of loaded into material.
SO CIN setteings are required are not.
pls suggest me what i do in that case.
As i think no setting required for excise CIN module cause client does not registered with Excise and treat excise condition into separate GL as VAT and CST.
Regards,
Dinesh

HI Nukala Padmaja,
Thanks for your help.
Could you tell me which service tax gl accounts should be entered there. We usually have 3 gl accounts i.e.
1. Service tax
2. Education Cess on ser. tax
3. ECS on service tax
and there are options for 6 GL accounts of service tax:
3 gl accounts for ser tax account &
3 gl accounts for ser tax payable
so i am confused where to entered that gl accounts.
Awaiting for your valuable suggestion.
Thanks and Regards,
Nilesh Joshi.

Cenvat credit on capital goods.

Dear all,
1. There is a rule that the cenvat credit in respect of capital goods shall be allowed for the whole amount of the duty paid on such capital goods in the same financial year if such capital goods are cleared from the factory as such in the same financial year.
2.The system is designed in such a way that the cenvat credit in respect of capital goods received in a factory or in the premises of the duty paid of output service at any point of time in a given financial year shall be taken only for an amount not exceeding fifty per cent. of the duty paid on such capital goods in the same financial year.
Please suggest us how to configure the system for the point no :1
Thanks & Regards,
A.Anandarajan.

By standard 50% credit can be taken on first year,If u want to take full credit use transaction J2I8,
Also refer both links
SAP MM CIN Settings
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/207dd2ad-bf92-2b10-a88b-e3a4a01ca7fc
Capital Procurement in SAP
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/808c60ca-013b-2c10-34a2-94d1eb442e6f
Edited by: Jeyakanthan A on Apr 22, 2010 2:01 PM

Utilization of Cenvat Credit from Service Tax Payable.

Hi,
Please guide me whether the process i am following is correct or not. And if it is correct, please help with what additional steps i might be required to perform inorder to resolve the issue.
Case: We are a Company where we donot manufacture and sell items. But we do provide services to our customers. Hence we would like to take the Cenvat input credit from the materials that we buy for our requirements and would like to utilize the Service tax that we would have to pay to Government (On our service contracts with customers).
During the process our RG23A Part-I, Part-II, RG23C Part-I, Part-II have been updated properly. Service tax entries for A/P and A/R have been posted successfully. And the next i am trying to do is utilize Service tax credit (AR) with Cenvat credit available from RG23A, and RG23C by using Transaction code: J2iUN.
I am using the option pay Service tax from Cenvat Cr.
Issue:
When i try to simulate after selecting the utilization from Basic excise duty, education cess and higher education cess i am able to see the entry that i require. But when i try to post the entry system is giving the following error message.
Balancing field " Profit center " in line item 001 not filled. Message ID: GLT2201.
The simulated entry is:
Sales tax payable A/c Dr
Education Cess payable A/c Dr
Secondary Higher Education Cess Payable A/c Dr
Cenvat Basic Excise Duty A/c Cr
Cenvat Education Cess A/c Cr
Cenvat Hig Sec Education Cess A/c Cr
Our Company code is active for Document Splitting with Profit center as a mandatory field.
Looking forward.
Thanks and Regards,
Purna.

Dear,
As per your description its look like you have follow standard procedure.
Only thing is that when you do J2IUN, Input Business Area on Selection screen to avoid profit center error.
Let me know if you still getting any error.
Regards,
Rajesh koladiya
Edited by: Rajesh Koladiya on May 7, 2010 5:09 PM

Which table is used in er1 cenvat credit taken and utilized report?

hii guru
i have want to know about where is store the value of opening balance's ecs value in details of cenvat credit taken and utilized report of er1?
give me briefly description of er1 cenvet credit updation cycle..

Hi,
You can use an SQL Trace ( Tcode : ST05 ) to get a trace of all the Database Tables that were accessed during a transaction execution. You will get a lot of Database Tables, but you can filter out the SAP System Tables from the Application tables from the Name space.
Have a look at the following link for a complete details on the SQL Trace and the Way you can further analyze it for the proper extraction of the application tables [SQL Trace|http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f89454211d189710000e8322d00/frameset.htm]
Hope this helps.
Thanks,
Samantak.

Transfer of cenvat credit to other plant

Similar Messages

Maybe you are looking for