Transfer PO Header text to backend

Hi,
I have a requirement where the header text for PO needs to be transfered to backend.
I have written the code in BBP ECS OUT badi. i have picked up the text and text id from BBP PO GET DETAIL function module and passed it to the ct_bapi_poheader_text parameter in the BADi.
When i check in ME23n i donot see the description.
I am in SRM 5.0. Can you please guide me on this. I have checked the threads here but none of them were of real help.
Regards,
Zubair.
Edited by: Zubair Ahmed on Aug 25, 2009 11:51 AM

Hi Kariya,
I think you can use this BAdi: ME_PROCESS_PO_CUST - Enhance Processing of Enjoy Purchase Order.
Use the method FIELDSELECTION_ITEM to "GET_DATA" / "SET_DATA" in the following available parameters:
- IM_HEADER - Document header
- IM_ITEM - Document item
Cheers.
Pedro

Similar Messages

  • Transfer document header text from billing document to FI document

    Dear all,
    Where do I specify that the document header text out of the billing document should be transferred to the corresponding FI document?
    Currently, the FI document header text (BKPF-BKTXT) remeans blank after transfer from billing document. We need this field to be filled in, but I haven't found how to have this filled in.
    In copy control from sales doc to billing doc, there is the possibility to transfer the Reference number & Assignment, but nothing about document header texts.
    Some say that it would only be possible via coding, but anybody has any idea if it might be possible via standard SAP?
    Many thanks!
    Best regards

    Hi,
    We also had a bit same requirement, which is to copy the billing header text to FI item text (BSEG-SGTXT). The solution we took is to use FI Substitution (t-code GGB1), so that every time a FI document created from SD... the substitution reads the billing header text and put it in the FI item text. I think the same method could be used for FI header text (BKPF-BKTXT). Below is the solution for your reference.
    Prerequisite:
    Document Type = 'RV' AND Reference <> '' AND
    ( Transaction code = 'VF01' OR Transaction code = 'VF02' OR
    Transaction code = 'VF03' )
    Substitution:
    Using exit which coding is as below.
    *&      Form  u900
          Copy Billing Header Text to SGTXT
         -->P_SGTXT    FI Item Text
    FORM u900 USING p_sgtxt TYPE bseg-sgtxt.
      DATA: lv_name TYPE thead-tdname,
            lt_line TYPE STANDARD TABLE OF tline,
            lw_line TYPE tline.
      lv_name = bkpf-xblnr.
      CALL FUNCTION 'READ_TEXT'
        EXPORTING
          id                      = 'Z001'
          language                = sy-langu
          name                    = lv_name
          object                  = 'VBBK'
        TABLES
          lines                   = lt_line[]
        EXCEPTIONS
          id                      = 1
          language                = 2
          name                    = 3
          not_found               = 4
          object                  = 5
          reference_check         = 6
          wrong_access_to_archive = 7
          OTHERS                  = 8.
      IF sy-subrc EQ 0.
        READ TABLE lt_line
          INTO lw_line
          INDEX 1.
      In Billing Header Text, the sign '&' (ampersand) is automatically
      added some characters so it becomes '<(>&<)>'.
      The logic below is to fix that issue.
        REPLACE ALL OCCURRENCES OF '<(>' IN lw_line-tdline WITH space.
        REPLACE ALL OCCURRENCES OF '<)>' IN lw_line-tdline WITH space.
        p_sgtxt = lw_line-tdline.
      ENDIF.
    ENDFORM.
    Regards,
    Teddy Kurniawan

  • Brazil: Copy Transfer Order header text to Nota Fiscal

    Good morning, all!
    The company I work for has a process in which certain non-retail goods are transferred from one store (or distribution center) to another. The transfer order is created in ME27. After that, the user creates a shipping document and executes the Post Goods Issue in VL02N. This creates a material document, the number of which movement automatically creates a Brazilian Nota Fiscal.
    We want to know how we might configure the system so that a header text in the shipping document or in the transfer order may be copied to the header text of the nota fiscal.
    Any suggestions?
    Thanks.

    That space is specifically about the process of sending the invoices to the government electronically (e-invoicing or NFe in portuguese).
    The functional process leading to the creation of the NF/invoice is either MM-related (if it's a purchase invoice) or SD (if it's a sales invoice). The transfer of invoice header text to the NF object (J1B3N) is specific to the Brazilian Localization of ERP.
    Blake Matthews,
    if you have someone from your Brazilian team, you can ask them to create a question in Portuguese in this space: Aplicações do SAP Business Suite (SAP Business Suite Applications).
    Best regards,
    Henrique.

  • Transfer of Header text from Sales Order to Delivery

    Hi Experts,
    I had a requirement to populate Terms of delivery text in Sales Order Header text with some predefined value which I have accomplished using MV45AFZB - User Exit USEREXIT_CHECK_VBAP which transfers the text on save of the document to sales order header (terms of Delivery Text ) .
    Now the issue is the same text is required to be copied to delivery - Terms of Delivery header Text. But this is not happening/Its occuring one out of 4 times . I am not able to find out the reason for this.
    Please help in this regard.
    Thanks

    This can be set in conifugration. Transaction VOTXN. The delivery header text can be set to be referenced from the sales order.

  • Unable to view document header text in MB51

    When creating a stock transport order in MB1B we are entering information into a field labeled "document header text". Then when running MB51 in the column labelled document header text nothing appears unless we enter under a specific movement type.  If we use another movement type the text does not transfer.
    Please assist.
    Thank you.

    Try using SELECT_TEXT in place of READ_TEXT.
    Hope this helps.
    Regards
    vinayak

  • Billing Document Header Text

    Hi
    I am looking to populate header text depending on the value of the billing document.  I have some standard text the needs to be displayed plus a value that needs to be calculated during processing e.g.
    "Blah blah value £ 12.32 blah blah"
    What is the best approch for this (SAP 45b)?
    1. Access sequence requirment number for 'texts'
    2. Access sequence requirment number for 'data transfer'
    3. User exit?
    Thanks...
    J

    basic question, please search before posting (in the correct forum).
    Thread locked
    Thomas

  • Header Text in Shopping Cart

    Hi experts!
    We developped a Webdynpro ABAP for creating shopping carts in a more effective way. This ABAP has a header & item information. With a function module we transfer all data to SRM5.0 standard shopping cart. Now my question:  How can we transfer header information into shopping cart where only item level is awailable? I would like to add a customer field (header text) similar to approval note.
    We would be very grateful for any help.
    Many thanks and best regards,
    Corinne

    Hi Corinne
    Refer to these notes
    1016297
    1033563
    They might be helpful.
    Reward points if you found your solution through these notes.
    Thnx

  • LSMW - Direct Input - Sales order - Header Text

    Hello,
    I upload scheduling agreement with header text.  Upload is successful and I have seen the text from both front end and table STXH.  However, this field is set mandatory, and even it is uploaded, it is still shown on incompletion log.  Only when I manually make some change it passes the incompletion check.
    Here is what i have done In LSMW::
    BTEXHKOM                       Communication fields for maintaining text header
        Fields
            OLDNR                        Document and item number of the data in the external system
                                Source:  ZHEADER-OLDNR (QAD SO no.)
                                Rule :   Transfer (MOVE)
                                Code:    BTEXHKOM-OLDNR = ZHEADER-OLDNR.
    Caution: Source field is longer than target field
            LAISO                        Language according to ISO 639
                                Code:    BTEXHKOM-LAISO = 'EN'.
            TDID                         Text ID
                                Rule :   Constant
                                Code:    BTEXHKOM-TDID = 'ZTTR'.
           BTEXLKOM                       Communication fields for maintaining text lines
               Fields
                   OLDNR                        Document and item number of the data in the external system
                                       Source:  ZHEADER-OLDNR (QAD SO no.)
                                       Rule :   Transfer (MOVE)
                                       Code:    BTEXLKOM-OLDNR = ZHEADER-OLDNR.
    Caution: Source field is longer than target field
                   TXPARGRAPH                   Tag column
                                       Code:    BTEXLKOM-TXPARGRAPH = '/'.
                   TXLINE                       Text editor text line
                                       Source:  ZHEADER-ZTEXT1 (Title of transfer)
                                       Rule :   Transfer (MOVE)
                                       Code:    BTEXLKOM-TXLINE = ZHEADER-ZTEXT1.
    I put them under same structure ZHEADER together with other header fields in SA. Is there anything missing?
    Thanks in advance.
    Susan

    Hi all,
    Many thanks for the suggestions.  One of our expert developers got involved and provided the solution.
    In order to have item level text populate, the VBAP-PSTYV  (the sales document item category) field also needs to be populated.  The VBAP-PSTYV field value is dependent on the sales document type.  (Or, at least it is for the configuartion set up in my example)  The sales document type is VBAK-AUART.
    Stuart

  • Routine for copying sales order header text to invoice

    Hi friends,
    My requirement is to copy header texts from sales orders when creating an invoice (VF01). In T-Code VOTX the system suggests two routines :
    1 - DATEN_KOPIEREN_01 include LV45TE01
    2 - DATEN_KOPIEREN_02 include LV45TE02
    Does anyone already use one of these routines? When invoicing more than one sales order does the routines work fot this case ?
    Best Regards.

    Hello.
    .....goto transaction VOFM
    Menue: Copying requirements -> Billing documents
    ...or maybe: Data transfer -> Billing documents
    Put a break-point and the header routine......for long-text you should use transaction VOTXN
    Edited by: Erik Hoven on Feb 24, 2009 12:28 PM

  • PO Header Text Replication from SRM 4.0 to ECC 5.0

    Hi All,
    I am trying to replicate PO Header Text from SRM 4.0 to ECC 5.0 with Extended Classic Scenario.
    Process of PO Header Text Entering in SRM PO:
    1. We create PO from Sourcing.
    2. We go to Processing POs and then we enter under Header Data -> Documents -> Internal note.
    I added code in BBP_PO_INBOUND_BADI (method: BBP_MAP_BEFORE_BAPI) related to header text mapping. I think this BAdI will not be triggered while processing PO from SRM.
    Please let me know the procedure or sugeestions to replicate header text from SRM 4.0 to ECC 5.0.
    Thanks,
    Sudarsan

    Hi
    1042516 - SAP Note
    Re: Vendor/Internal note text for Confirmation of PO in SRM
    Internal note can be passed to R/3 PO. It is standard. check it up.
    Internal note must copy to another follow on document but why it is not copying in to your backend PO.
    You can try oss notes .. I will update you if i find any notes
    Regards
    Muthu

  • Text is not copying into Header Text Type from Contract to Order & Invoice

    Salute Masters!!
    I have done related configuration in VOTXN for Sales Document & Billing.
    After creation of Contract, given Text in New Header Text Type, itu2019s not copying into Sales Order or Invoice.
    Although, which was configured earlier one, for that Header Text Type, text is copying into Order & Invoice both properly.
    Firstly; I have given the same Access Sequence for the New Header Text Type, It was copying the same matter which was given into Old Header Text Type, then I have created new Access Sequence & assigned changed Access Sequence for the New Header Text Type, even then it is not copying.
    I have checked other Configuration those are OK!
    Assignment of Sales Document Type to Text Determination Procedure, it is OK!
    Please provide the solution.
    Thanks in advance.
    Warm Regards,
    Sanjai Srivastav

    Hi
    Hope the issue is resolved , if not please check these settings - VOTXN
    1. Create Text Type for your Sales order -S001 and Billing Invoice - B001
    2. Create Access Sequence - Z001.
    3. Include your Both Text Type in respective Procedures.
    Now
    WHen you will assign the Text into your Text Procedure - Assign same Access Sequence in both the case.
    In your Sales Order text procedure - Assign
    1. Assign Text Type S001  and Access Seq Z001
    2. Select the Access Seq on the left side in the VOTXN T-Code , a POP up will come and then input Your Access Seq into that
    3. You will get another screen, Here give the Seq No-1 and VBBK Header Text and Again Assign TEXT type S001.
    Now go to Invoice Text Procedure
    1. Assign Text Type B001 and Access Seq Z001 and SAVE.
    Once you will do that the step 2 and 3 will automatically get copy in the backend.
    To Check
    2. Select Access Seq on left side and in the Pop Up input access Seq. Now there you will see the system has copied the
    fields from the Order.
    Now try running the scenario. same you can do for Contract and Order.
    Hopefully this will Help you.
    please let me know if any concerns
    Thanks
    RB

  • Copy Mat. Doc Header Text to FI Doc. Header Text

    Dear Guru,
    Is there anyway to transfer the Material Document Header Text to the Accounting Document Header Text?
    I tried to use the FI Substitution, but somehow in the substitution exit, it just cannot get the material document number from there.
    Any help would be greatly appreciated! Thank you!
    Regards,
    Chris

    Hi Kenix, yes, that's what I mean. From the database record, I can see it actually works before.
    But not sure if it is because we upgraded from 4.6C to ECC6, this function is gone. Any advise?

  • Add default value to the Header Text of the Quotation

    Hi All,
    I want to add the default value to the header text of the Quotation.
    I've created the Text Type and Access Sequence usign the VOTXN,
    but I want some default text shown on the header text when user click on the Text type.
    for e.g.
    "The reason", "Qty"....
    I've check the routine of data transfer and also the User Exit MV45AFZB Userexit_MOVE_FIELD_TO_TVCOM_H...still no solution.
    Please help.
    Terry

    Please check below link.
    http://www.sapfans.com/forums/viewtopic.php?f=5&t=324385

  • Header text not getting populated in PO in R/3 from SRM!

    Hi,
    Our requirement is to automatically populate the email ID of the user in the header text once the PO is created in R/3 with reference to Shopping Cart in SRM.
    our scenario is classic.
    So far, we have used the following Badis in our development but seems to be not working.
    1.ME_Process_PO_Cust
    2.BBP_PO_INBOUND_BADI
    Need your inputs to solve this email querry.
    Regards,
    Archit Gandhi
    Edited by: Archit Gandhi on Feb 4, 2011 11:14 AM

    Check "Text Schema" & "Text Mapping" config part under Cross-Application Basic Settings..
    This should help you.. If you need help in configuration let me know..
    Thanks!!
    Bharath

  • Copy of header text

    Hi SAP Gurus,
    Is there any SAP std. possibility, If I entered the text in the Credit memo heder and which get copied into the output of the Invoice list(Credit memo list).
    If yes then please let me know how to configure.
    Thanks & Regards,
    Sachin

    Hi Sachin,
    To map your requirement you have to ask your Abaper to pick up the Text entered in the Header Text field by using Function module "READ_TEXT" (T-code - SE37).
    Firstly go to the Billing document> Header> Text and press the Display log icon available at the bottom where you have entered your Text. It will give you details like ID and Object name against the Text Type where you have entered your text.      
    Then Use T-code - SE37 then select "READ_TEXT" function module and Execute. System will ask you to enter your client code, ID, Language and the Billing document no. along with the Object Name and then execute. System will display the RESULT at the bottom. Ask your ABAPer to pick this data and use the same on Invoice.
    Hope the above meets your requirement.
    REWARD if it helps you!!
    Regards,
    Ajinkya

Maybe you are looking for