Transport of Message Class

Hi,
I have added a set of messages to a message class for different kinds of developments. So the messages are under different transport requests. I want to move the transports up in the landscape. Does the sequence of transports for the message class matter because I cannot move all the transports up in the landscape at this moment.
Any input would be appreciated.
Thanks,
Alam.

Hi Alam. To answer your question...... maybe. And the reason I say this is, it would be a problem if you had created the message class and put it on the one transport, then put other messages on other transports. Of course this would cause a problem. But if the message class was pre-existing and the transport only have messages tied to them, then there is absolutly no problem with sending them out of sequence, the skipped messages will simply be blank in the message class in the target system.
Regards,
Rich Heilman

Similar Messages

Transport translations of all messages in a custom message class

Hi all
Prerequisites:
I've created a message class nad fill it with more than 100 messages.
I also translated all of them in another language.
I have no access to another system to import the transport for test purposes :(.
Question:
How to create a transport for all the translations excluding the option to include them one by one in SE09->display object list
PgmID Obj. Type Object name
LANG MESS <message> ?
Is it enough to create a transport of the whole class in SE09->display object list
PgmID Obj. Type Object name
R3TR MSAG <message_class> ?
Does such transport include all available translations?
Thanks in advance for all answers! 

Use SE63.
Search forum for more related queries.
Its advisable to search the forum before posting the queries.

Transport request and Message class?

Hi,
How to create a transport request for the changes I made in a content of the table (eg: T100 ) so that the changes can reflect in all clients. and please mention the name of message class for the object BUS2121 or else name the message class for the messages that has been used in shopping cart email templates.
regards,
George.

Hi,
The message for SC is BBP_PD, you will find in SE91 txn. and you would need to know the message number to customize it, you can do it in SPRO-Cross-application settings-> Message control, and then select BUS2121 and add new entry to change it from standard.
Award Pointsif helps.
Thanks.

Transport of translated messages in a message class

Hi,
For existing message class, translated messages from one language to another language.
Now my requirement is to attach the translated messages to a transport request.
Best Regards,
Raghu

Use SE63.
Search forum for more related queries.
Its advisable to search the forum before posting the queries.

Problem by transporting the message mapping from PI 7.0 to PI 7.1

Hi Everyone,
by transporting the message mapping from PI 7.0 to PI 7.1 i have got the following problem.
"Source code has syntax error:
K:\usr\sap\E71\DVEBMGS00\j2ee\cluster\serve......
package udfpool does not exist
import udfpool.*;
i have used a UDF in my message mapping.
This UDF calls for a method of a java class, which is imported as a .jar file with this message mapping.
this message mapping works very well on PI 7.0,
but doesn't work any more on PI 7.1 because of the problem described above.
anyone can help me out of this problem?
thanks!
zc

hi,
but did you import the jar archive to 7.1 first?
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ

Message Text in a Message Class is missing in Production System

Hi,
I am facing a peculiar error, in Message Class, the messages which I created was missing all of sudden in Prod system which was present earlier.
The same messages are available in Dev and QA system.
Even I checked all the transports whether I have deleted unknowingly and moved to Prod, but I didn't.
Whether Is it possible to delete the messages in Prod system directly and Is there any way to find how the messages got missed in Prod system. Kindly share your valuable inputs.
Regards,
Karthikeyan.

Hi Karthikeyan,
If the SAP systems are upgraded recently this case may occur. Sometimes during the enhancement patch upgrade some objects get vanishes from systems.
So you can take help of the BASIS team, Inform them this object was present earlier.
They will take a look and will resolve it.
Cheers,
Pravin

Message Class Versions

Hi Experts,
How can i check the versions of the message class(Se91)?
I need to check if a particular message class is existing or not in other system(QA) for which i DO NOT have access.
Pls suggest.
Thanks
Ricky

Ricky : You can try in one way. You can try by finding the TR's involved for the message objects.
Goto Se03 and try with search for objects in Requests and F8. In the next screen you can specify the Prog ID & Obj ID
for eg: R3TR MSAG ..etc and give the name of the messge class you are trying to find.
If previous transport exist, it will bring up that one in the next screen. You can thereafter goto that TR and check the message logs of the Message class exits in that TR version.
thanks
Hari K Ganti

Message Class TR

Hi,
How to find the Transport Request for Message Class?

Hello
Depending on whether the request contains the entire message class or partial objects of it search for the following object types in the requests ( SE03 ):
R3TR MSAG <name of message class>
LIMU MESS <single message of class>
LIMU MSAD <name of message class> " definition and short texts
Regards
Uwe

I am not able to execute the transport.send(message)

I am not able to execute the transport.send(message) when trying for sending mail. I am getting error like this : -
javax.mail.SendFailedException: Sending failed; nested exception is: javax.mail.MessagingException: Could not connect to SMTP host: 10.175.80.50, port: 25; nested exception is: java.net.ConnectException: Connection timed out: connect
Please help me on this to resolve this issue asap. thanks

Hi Vinod,
public void SendMail( )
    //@@begin SendMail()
          // Specify the host name of the mail server
          String host ="----
          IWDMessageManager messageMgr = wdControllerAPI.getComponent().getMessageManager();
          // Initialize Session
          Properties props = System.getProperties();
          props.put("mail.smtp.host", host);
          props.put("mail.smtp.auth", "true");
          Authenticator auth = new Auth();
          Session session = Session.getInstance(props, auth);
          // Create new MimeMessage
          MimeMessage message = new MimeMessage(session);
          try
                // Set the From Address
                String from = wdContext.currentContextElement().getCtx_From();
               message.setFrom(new InternetAddress(from));
               // Set the To Address
               String to = wdContext.currentContextElement().getCtx_To();
               Address ar[] = new Address[1];
               ar[0] = new InternetAddress(to);
               message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
               // Set the Subject
               message.setSubject(wdContext.currentContextElement().getCtx_Subject());
               // Set the Text
               message.setText(wdContext.currentContextElement().getCtx_Text());
               Transport tr = session.getTransport("smtp");
               tr.connect("Put again here Host Name", Port Noumber, "userid", "password");
               tr.sendMessage(message, ar);
          }catch (AuthenticationFailedException e){
               messageMgr.reportException(e.toString(),false);
          }catch (AddressException e)     {
               messageMgr.reportException(e.toString(),false);
          } catch (MessagingException e) {
               messageMgr.reportException(e.toString(),false);
          }catch (Exception e){
               messageMgr.reportException(e.toString(),false);
    //@@end
And also create the class Auth() like
public class Auth extends Authenticator {
     public PasswordAuthentication getPasswordAuthentication()
          String username = "userID";
          String password = "Passwod";
          return new PasswordAuthentication(username,password);
Please check it i think i will work. Also please use constant value for the to, from, subject and text.

How to transport Error Message in Accounting Validation

Dear Expert,
While transporting an accounting validation the error message related to the validation is not getting transported.
Please advise how to transport.
Regards,
Alok

Hi,
Message relating to Validation needs to be separately transported. These messages are created in SE91 and your ABAPer would be able to transport the messages using the Z Message Class he would have created for you.
Regards,
Sanjay
That's not correct; messages could be incorporated in the validation transport
Edited by: Eli Klovski on Mar 8, 2012 1:14 PM

Help transport .send(message) problem

I am getting an error at transport.send(message)
javax.mail.SendFailedException: Sending failed; nested exception is: class javax.mail.AuthenticationFailedException After eleminating all lines the error is at transport.send(msg)
Please help - tell me what I have been doing wrong
My code - is java mail using a jsp
try{
     //Properties props = System.getProperties();
Properties props = new Properties();
Store store;
props.put("mail.smtp.host", "smtp.snet.yahoo.com");
props.put("mail.smtp.auth", "true");
Session s = Session.getInstance(props,null);
MimeMessage message = new MimeMessage(s);
InternetAddress from = new InternetAddress("[email protected]");
message.setFrom(from);
String toAddresses = request.getParameter("to");
message.addRecipients(Message.RecipientType.TO, toAddresses);
String ccAddresses = request.getParameter("cc");
message.setRecipients(Message.RecipientType.CC, ccAddresses);
String bccAddresses = request.getParameter("bcc");
message.setRecipients(Message.RecipientType.BCC, bccAddresses);
String subject = request.getParameter("subject");
message.setSubject(subject);
message.setSentDate(new Date());
String text = request.getParameter("text");
message.setText(text);
Transport.send(message); //error is here
%>

You are specifying authentication to be used, but you aren't supplying any authentication credentials, hence the AuthenticationFailedException.
You need to create an Authenticator class. If you just need simple username/password authentication, just create a class to handle this.
For example:
public class SimpleAuthenticator extends Authenticator {
private String username;
private String password;
private PasswordAuthentication auth;
public java.lang.String getPassword() {
    return password;
public PasswordAuthentication getPasswordAuthentication() {
    if(auth == null) {
      auth = new PasswordAuthentication(username, password);
    return auth;
public java.lang.String getUsername() {
    return username;
public void setPassword(java.lang.String password) {
    password = password;
public void setUsername(java.lang.String username) {
    username = username;
}Then, when you create the session:
SimpleAuthenticator auth = new SimpleAuthenticator();
auth.setUsername("yourusername");
auth.setPassword("yourpassword");And instead of
Session s = Session.getInstance(props,null);use
Session s = Session.getInstance(props,auth);

Setting Message Class via Content-Type for Faxes

Hello,
I am trying to set the message class for inbound email messages (with a fax attachment) from the internet. The class that I am trying to set is IPM.Note.Microsoft.Fax.CA. Exchange 2013 SP1 is being used.
I have a transport rule set up which evaluates criteria on the incoming message, and then sets the Content-Class header to fax-ca. Unfortunately, even though the content-class header is being set (I can see this is the headers when the message gets
to Outlook), the message class is not changing and the message still has the IPM.Note class.
On the other hand, if the transport rule is modified to set the Content-Class to voice-ca, the message class changes to IPM.Note.Microsoft.Voicemail.UM.CA.
So it seems that it works for voice-ca, but not fax-ca. Is there an Exchange setting that I have missed? Is there a reason why this wouldn't work for fax?
Thanks.

Hello,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Transport of Charasteristics & Class

Dear Gurus,
I have created Characteristics usting TCode CT04 & Class using TCode AL05.(Navigation path is , SAP menu-Logistics-Central Functions -Document Management System -Classification -Master Data)
But I am not able to transport to the same.Can you let me know How Can I transport these details?
Regards
Damodar Pai

Hi Damodar,
characteristics and classes use internal keys which are valid only in the system and client where they were created. So transporting characteristics and classes may create conflicts with these internal keys in the target, as the same internal key may already have been used there for a different characteristic or class. So I generally would not recommend to use transports here.
The intended way is to use distribution via ALE. The relevant message types are CHRMAS (characteristics), CLSMAS (classes) and CLFMAS (if you want to distribute classifications too). You may need to distribute additional objects like change numbers, if they are used. Distributions can be started manually with transaction BD91, BD92 and BD93 or automatically triggered by change pointers created during update processing of characteristics, classes (and classifications). Take care to distribute in sequence CHRMAS, CLSMAS (and CLSMAS). Don't forget to distribut additional objects if necessary.
Regards,
Rolf

Is it Advicable to modify standard message class?

Hi Experts,
I need a small confirmation.Is modifying standard message class is having any restrictions?
Currently in SE91 message class number 002 i need to modify text .Is it ok to directly do and transport or need to take any extra precautions?
Regards
sas

Hi Thomas,
Thanks for the suggestion.
Actually message class name: HRTIMOOREC.
In that one message always shows what ever leave action is it shows as 'Number of days leave 5. Apply sick leave for HR'.
Requirement is just to remove 'Apply Sick Leave for HR'.
so that it wont confuse the clients who are applying for some other leaves..so request is to just modify
that number 001.
So in general need to modify SAP programs we required Access keys here its not required i guess...
Now Thomas is there any things need to taken care or general Message class how we do the same and Transfer? Thanks
Regards
sas

Message Class - Validation

Hi
Message class can it be transpoted without release(Transport request) to other clients. ????
The problem is ,once the message class is created & released, not in a postion to add any new messages .
For any new requirement ,new message class is been created and transported to other clients .
Any solution avvailable to maintain only one message class through out implementation with different clients .
Regards
Rao

hi
you can create new messages in the same message class and save it.
this will generate another request which can be transportable to other clients.

Transport of Message Class

Similar Messages

Maybe you are looking for