Transport of RSPLSE settings

Hi experts,
Is there any way to ransport lock settings made in RSPLSE? We have adjusted settings for several cubes in dev. Do we need to make the same in al, the systems (test, perofrmance, user acceptance, regression, production....) or there is a wy to transport them?
Thanks in advance,
Marcin

Hi,
please take a look at
[Is RSPLSE setting Transportable ?;
Thanks Matthias

Similar Messages

Transport of locking settings / locking characteristics

Hi @ all,
is it possible to transport locking settings/lock characteristics (for an InfoCube) from development to production system. I couldn't find the correct object in the transport connection. Or do I have to set it manually in the produktion system?
Kind regards,
Johannes

You can't transport the lock settings.
You have to do them manually in each system.

GRC 10.0 - Transport Connector Relevant Settings

Hi Gurus,
Many of you have already completetd GRC 10.0 implementaion. One of the Key advantage of GRC 10.0 stated as "Changes can be transported".
While carrying out configuration settings under nodes SPRO -->GRC --> Common Component Settings --> Integration Framework and other Subsequent nodes in Access Control, we find many steps involve Connector, Connector Mappings, Actions related Settings which are connector dependent.
Further, there are relevant sub-nodes viz. User Defaults, User data sources, HR Triggers etc., which involve connector values as part of configuration steps.
We have created Back end test / Development related connectors and carried out the relevant configuration settings. We find that all these settings are getting collected in the transport request.
Once we move this transport request to GRC QAS / Production landscape all the back-end Test / Development /QAS related connector settings will also move. Further this will also call for defining back-end Production systems related Connector Settings in GRC Development System itself.
Looking forward for inputs with respect best practices for managing the GRC 10.0 config / workflow related transports across Dev / QAS / landscape.
Regards
Hemant

Hi Hemant
SAP has made a lot of the transport functionality in GRC10. I find that they hereby created a huge expectation with the customer, that in fact is not true.
For instance Exclusion Objects and Mitigation Controls are NOT transported. What about Organizations? Critical Roles and Profiles are also not transportable.
As for the Connectors - system specific parameters are transported. Therefore you end up having to delete the DEV and QA connectors in the PRD GRC system.
On this question, has anyone used CLM yet? It seems that only Functions and Risks will be extracted to CLM and then deployed in the other system (DEV to QA for example). Does CLM even work?
SAP provide not guidance on all of these important issues. I agree that it is about time that SAP takes some leadership and produce a proper best practise guide for this software. By the way, an offical sizing document from SAP is still to be delivered.
Thanks
Will

Is it possible to transport partner profile settings ?

hello,
is it possible that whatever partner profile settings i have maintained in development server that i can transport into production server?
or i have to maintain it manually?

Hi,
Partner profile setting are actually soft configuration and you cannot transport them.
You have to set partner profile in all stages.
Nilesh

Can I transport partner profile settings frm one system to other?

hello,
is it poosible that whatever partner profile settings i have maintained in development server that i can trasport into production server?
or i have to maintain it manually?

Hi,
Usually you have to maintain manually the partner profile in production system due to security and data integrity purposes.
For example, you don't want to send any testing data to your partners (vendor, customer, etc) and you want to make sure the interfaces (inbound and outbound) work properly and free errors.
Having said that you can distribute and generate partner profile (BD64) from DEV to QA without using transport system. Please ensure RFC connection are setup properly for DEV and QA systems prior to distribute.
Regards,
Ferry Lianto

Transport of OKE5 settings

Hi Gurus,
When I am saving Controlling Area settings for PCA in transaction OKE5, system is not generating any Transport request.
Can anyone tell me, how to generate the transport request for the same settings and how transport it to Quality Server.
Thanks in Advance,
Ganesh

there is 2 important transactions to transport co configuration
to transport basic CO configuration use transaccion oke5
to transport basic CO-PCA configuration (tx 0ke5) use transaction 0keq
Regards

Transport Forums Related Settings

Hello All,
We are on EP7.0 SP15 and we would like to transport the forums related content\settings\threads from our Dev landscape to QA landscape.
When we login with administrator privledge into the system(where in we owuld like to import the settings) and type in this url
http://yourportal.yourdomain.com:50000/irj/portal/forumsadmin?ForumsTarget=system-dataimport.jsp
We get redirected to the home page.
Has anyone faced this before or any help in this regards will be much appreciated.
Warm regards

Hello Paul,
See this link.
[Link|http://help.sap.com/saphelp_nw70/helpdata/EN/44/964dd989893ac1e10000000a155369/content.htm]
[Link1|http://help.sap.com/saphelp_nw70/helpdata/EN/44/9a9fe78aa474a2e10000000a11466f/content.htm]
Regards.
Vinit
Edited by: Vinit Soni on Sep 30, 2008 6:35 PM

Transporting your FCP settings...

Hi there,
I'd like to transport my FCP user settings to another computer and I'd like my keyboard layout and window layout to remain intact. Do I just need to copy my window layout files?
Thanks as always.

Dude...it's LABOR DAY. Many people aren't working, but rather BBQing or cruising on the lake with their boats.
Or don't know the answer to your question.
Patience...
Shane

ALE Transports overwritting local settings in SD account determination

When sending over ALE transports for SD account determination changes, it is deleting existing entries in the local system. For example we maintain entries for sales orgs that are maintained on the local system, but when we ALE entries for the other sales org, the local entries are deleted. Why?
This is also happening with international addresses that are maintained on the local box. When we ALE over the English address the international address that was created on the local box is deleted. Any help would be greatly appreciated.
Jocelyn

Dear,
Like MM-FI Integration is done solely by the Finance people, they will ask MM counter part only in some cases....FI-SD integration is done by SD people....you (finance) just need to supply the GL account information.....
Use VKOA to maintain FI-SD integration..
Regards,
Chintan Joshi

Can Transport Visual Admin Settings and Configuration?

Hi all,
I'm using EP 7.0 and SP13. Due to reinstallation of our server i need to export all the configuration setting of Visual Admin.
Exported all the visual Admin configuration by using Tool-->Export.
while exporting the corresponding zip file automatic stored in the server path C:\usr\sap\Server Instance No\JC00\j2ee\admin\J2EE Engine Configuration.zip
But i dont know how and where to import the J2EE Engine Configuration.zip again into server .
what can i do..
Regards
Thillai J

Thillai J
This question is marked both answered and u2018not solvedu2019.
In case you are still looking for an answer, Config Tool Export and Import should be used instead of Visual Admin.
Hope this helps.
PJ

Transport current settings for KPU1

Hi,
I need to be able to make changes directly through transaction KPU1 in my production system even though the system is in not modifiable status. I have read somewhere that it may be possible to do this using by transporting the current settings using transaction SOBJ in my development. SOBJ asks for the object name. I entered RKPU1 and get the message "RKPU1 not active or does not exist" even though I can see that this table is active in SE11...Not sure how to proceed..Please advise...

2. In the transaction OMSL the Material Length is 18 which is the same in R3.
What about the above setting in QA ???

XCM Settings transport

Hi Gurus,
I haven't found anything about transport of XCM setting from an environment to antoher.
Is this possible?
can you help?
thanks

Hi,
Yes you can transport the XCM settings.
In the first node of XCM settings you find the options to download XCM Configurations. You have to download two fiels and can be uploaded to other environment at the same place in EDIT mode.
Regards,
Sateesh Chandra

Transport XCM settings

Hi Experts,
Please tell me how to transport XCM configuration settings from one server to other (DEV --> QUAL --> PROD). Like we have transport request system in other SAP functionalities, do we have something of this sort in XCM also?
Thanks
Varun

Hello Varun,
Usually it is created (input) or copied in each environment for a couple of simple reasons.
The backend system (host name, system #, client, user id and password of Jco user) properties are different in different landscape.
The XCM files default location is same in all the environments. So, it is usually copied from one environment to the other and the required information is changed ( jco component and the default Customer configuration )
Easwar Ram
http://www.parxlns.com

What's the difference between transport route and transport layer

what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

Hi,
Transport Layer in ABAP Workbench
    The Change and Transport System supports the distribution of development
    work on large projects across multiple SAP Systems.
    The packages in each development system are grouped into one transport
    layer.
    The transport layer determines whether objects are assigned to a local
    or transportable change request.
Use
    Each of your SAP development systems is assigned a transport layer as
    its standard transport layer. If you use Extended Transport Control, you
    can assign different standard transport layers to certain clients.
    You can define at the most one consolidation target for each SAP System
and transport layer.
When you create a package, it is assigned the standard transport layer
of the SAP System.
If you want to assign a different transport layer to a package, you
require the administration authorization for the Change and Transport
System.
The objects in a package automatically have the transport attributes
defined for the corresponding transport layer.
o   If a consolidation route originating in their SAP System is defined,
     then the objects are assigned to a transportable request, and
     transported into the consolidation target when it is released.
o   If a consolidation route is not defined, the objects are assigned to
     a local request, and are not transported.
Customizing settings are not assigned to a package. They have the
transport attributes of the standard transport layer of the system or
client.
It is best to assign a package a standard transport layer for which a
consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the
Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
     The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
     Release 4.0A and cannot be maintained.
Regards
Ben

Appraisal template transporting problem

Hi Gurus!
Appraisal template transport work only between mandants of development system. It doesn't work for other systems ( QAS, productive)
Category and category Group was transported earlier.
I did number ranges for objects VA,VB,VC. So there are no such objects in QAS system.
Report RHSOBJCH was done.
What else should I do?

I have found SAP Note 1475428 - Transport appraisal Basic settings
2-Following entries must exist in T77S0:
If LSO is installed:
TRSP STOBJ 'PDST_LSO'
TRSP WFOBJ 'PDWS_LSO'
If LSO is not installed:
TRSP STOBJ 'PDST'
TRSP WFOBJ 'PDWS'
It works at last!!!

Transport of RSPLSE settings

Similar Messages

Maybe you are looking for