Transportation Zones available in Standard SAP system

Hi,
My requiement is to default some transportation zones using middleware application during customer creation using BAPI....
I want to know whether there is any one transportation zone which is available in standard SAP for all countries.
please post your views
Thanks in Advance
Muthu

Hi
Pl. check the transaction OVR1 and OVL7.
Hope this is what you are looking for.
Regards
Amitesh

Similar Messages

SIK Transport files and None unicode SAP system

Dear all,
I have a question about SIK Transport files.
As you know, when we install BOE SIK,we need transport some files into SAP system.
There is a TXT file for describing how to use SIK transport files in SAP system.
I found that there is no detail about none unicode SAP system in this TXT file.
All of them is about unicode.
If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below:
(These files are ANSI.)
Open SQL Connectivity transport (K900084.r22 and R900084.r22)
Info Set Connectivity transport (K900085.r22 and R900085.r22)
Row-level Security Definition transport (K900086.r22 and R900086.r22)
Cluster Definition transport (K900093.r22 and R900093.r22)
Authentication Helpers transport (K900088.r22 and R900088.r22)
If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below:
(These files are Unicode enabled.)
Open SQL Connectivity transport (K900574.r21 and R900574.r21)
Info Set Connectivity transport (K900575.r21 and R900575.r21)
Row-level Security Definition transport (K900576.r21 and R900576.r21)
Cluster Definition transport (K900585.r21 and R900585.r21)
Authentication Helpers transport (K900578.r21 and R900578.r21)
The following files must be used on an SAP BW system:
(These files are Unicode enabled.)
Content Administration transport (K900579.r21 and R900579.r21)
Personalization transport (K900580.r21 and R900580.r21)
MDX Query Connectivity transport (K900581.r21 and R900581.r21)
ODS Connectivity transport (K900582.r21 and R900582.r21)
If our SAP BASIS system is beyond 6.20,but iit is not unicode system.
Could we use these transport files to none unicode SAP system ?
Thanks!
Wayne

Hi Wayne,
the text and the installation guide is clearly advising based on the version of your underlying BASIS system and differentiates 620 or 640 and higher.
so based on the fact that you system is a BI 7 system you are in the category of a 640 (or higher) basis system and therefore you have to use the Unicode ENABLED transports.
ingo

Daily morning report mentioning the availability of the SAP systems ?

Hello,
We have been asked by the business team to send them every morning at 8h00, a report that would mention which SAP systems are available.
For the moment,we are doing that manually.
Of course CCMSPING has already been implemented on our Solution manager, but as you can imagine we generate emails only when the satelites systems are not availables.
But this is not what has been asked to us, the business team want to know which systems are available every morning.
I did some researchs about sap solution manager feature that could fulfill this requests but I couldn't find it.
The SLR (Service Level Reporting) can not be used : because SLR reports are generated weekly.
Any idea would be highly appreciated.
Best Regards.
Thanks

You can difine in trx SM36, a new JOB, in button SPOOL LIST RECIPIENT add every the email, or distribution list that you need. In the button STAR CONDITION must indicate PERIOD VALUES at 8:00 that every day.
Regards

Difference btw: Distributed, High-Availability and Additional SAP System Instances

Hello,
In the installation Doc for NW 741, there is 3 other installations scenarios beside the single instance, can you pl. highlight the difference?
Cheers,
F

Hello Fouad,
Distributed landscape:
In distributed landscape, every instance can run on a separate host
- Central services instance for ABAP ( ASCS)
- Enqueue replication server instance (ERS instance ) for ASCS instance
- Database instance
- Primary application server instance (PAS)
High availability :
In high availability ,all above instances can run on seperate host. Here you can run all instance in switchover cluster infrastructure. That means ,for any instance if one node in cluster fails ,it switch over to other other node and still operations can run without any distrubance.
Additional SAP instance:
Additional SAP aaplication instance can be installed to scale the performance of an SAP system. It can be installed on one of the above instance host or on differnt host.
The term "additional application server instance "was introduced to replace term dialog instance from SAP Netweaver 7.1 and higher.
For more and detailed information ,you can refer to Installation guide for the SAP release you are planning to install and for DB/OS combination.
Hope this helps.
Regards,
Archana

How to install transport request files into the SAP system

Hi Experts,
I want to install transport request files into my SAP source and target system . I am from BW/BI background so can anyone help me out with the step by step procedure for the above installation.
Thanks in advance
Regards
Shiva

Hi,
What I understand is, you want to transport request from one server to another.
for example, Development to Qualtiy or Quality to Production.
For this your transport system must be configured. Please search help.sap.com or google for "How to configure Transport System (STMS)".
If you want to copy transport request from one system to another system which is not in your landscape, you need to physically move/copy transport request (cofile and datafile) to the target system in /usr/sap/trans/cofiles and /usr/sap/trans/data
Then import that request using SCC1.
You can alos perform TEST import for result.
Regards.
Rajesh Narkhede

Report combination of PC, CC & IO - Is it available in standard SAP?

Hi there,
I am looking for a report that would give me periodical balances for an Account number (Cost Element) for PC/CC/IO
Is there any report that accepts -
CO Area, FY, Period, Co Code, GL Account (Cost Element), Profit Center, Cost Center and Internal Order Report -
as INPUT parameters?
Based on this, I am expecting a report that shows up periodic Financial Data for above mentioned parameters.
Many Thanks...

I guess the only thing which you can do is try changing the layout of FBL3N for comapny codes. You do have fields of Cost Center, Internal Order & Profit Center there.
Please note that this will be availble at a company code level & not at a controlling area level.
One of my previous clients had a similar requirement.We used this solution which they were ok with. I dont think there is any Std SAP CO report which can give you all this in one report.
Regards,
Sreedhar Chandran

How to transport the CO and DATA file to SAP system

Hello Experts ,
I want to know the procedure to import a transport request into an isolated SAP system ( which is not in the transport route ) using the CO and DATA files .
I know that user should have adminstrator role to do this but i dont know how to do this .
Regards
Vivek

Simply copy the source cofile and datafile from the source system to the target system and then import.
Data file is located at /usr/sap/trans/<sid>/data with format R<transport_number>.<sid> and cofile is located at /usr/sap/trans/<sid>/cofile with format K<transport_number>.<sid>
Copy them to the same location on the target system and then go to STMS -> Extras -> Add -> insert the name of the transport in format <sid>K<transport_number>, this will add the transport to the import queue then just simply import the transport.
Regards
Juan

KPIs for Project systems from standard SAP

Dear Friends,
can you please provide me the KPIs for PS module, available from standard SAP.
Thanks,
Nav

Not able to understand your requirement.
In my understanding there is no such things as KPI for SAP PS in standard SAP.
KPI's are usually reporting requirements assessed during blueprint phase and are client specfic.

[Crystal Reports 2008] - Logon failed in SAP system

Hi everybody,
I have installed on my notebook Crystal Reports 2008 trial version and the Integration Kit for SAP Solutions that I found on this web page: https://boc.sdn.sap.com/node/18962
When I try to open a SAP Data Source, Crystal Reports finds the connections I have in my SAPLogon and ask me credential infos. I get the following credential error:
"You do not have the necessary rights to design reports against the SAP System"
The user I enter has full administration right on the system, which is a SAP R/3 Enterprise.
Thanks,
Valerio

Hello Valerio,
Please make sure you install the corresponding transports for the Driver you are trying to use in Crystal Reports.
The transports are available on the SAP Integration Solution CD.
thanks
Mike

Multiple SAP Systems In One MSCS Cluster

We have installed a NW 7.0 EHP abap stack in a MSCS Cluster with 2 nodes.
This was installed as a standard Cluster Install.
We have now higlighted a requirement to install a 2nd (Java ) instance in this Cluster Group.
The NW 7.0 EHP1 documentation and Note 1321854 shows that multiple SAP systems in one MSCS cluster is supported.
The documentation, however, is not clear if the 2nd instance can be installed when the 1st instance was installed without the preperations for Multiple Systems.
There are no further documentation or guidelines to help.
Has anyone come across this situation or managed to install 2 SAP instances in one Cluster Group based on Windows 2003, SQL Server 2005.
Regards

I am not quite sure if I understood your problem completley. But let's see...
Usually you use on on MSCS Cluster Group per SAP instance. So you have your already existing NW 7.0 ABAP stack in a separated Cluster Group, and you create a new Cluster Group for your new Java system.
You can find more information about it in this guide here on SDN:
Link: [High Availability;
More information about High Availability Setups for SAP System can be found here on SDN:
Link: [High Availability]
If you want to use the same database for your clustered ABAP stack and your new Java stack you can do a MCOD installation.
Please see Link: [SAP Note 388866 - Multiple Components on One Database - Installation|https://service.sap.com/sap/support/notes/388866]
Hope this helps.
Best regards,
Mathias

Retrieve a corrupted standard SAP query (SQ01)

Hi experts,
We have an standard query that is giving a dump because an user has modified and transported it to consolidation and production systems.
I don't know if there's a way to compare versions and retrieve versions. Right now we have accessed to client 000 and we are analysing if it's feasible to retrieve the 000 version. The query is defined as GLOBAL (client independent) and it's assigned to an standard package /SAPQUERY/FIAQ.
I'm on the right way or maybe there's another solution that we're not taking into account?
More ideas would be appreciated.
Ismael
Message was edited by:
Ismael Mateo

Thanks for the answer Barry, this is clear.
But the problem is that all the systems are overwritten with the modified version (Development, Consolidation and Production) and we don't have the original version anywhere, therefore we can't export/import it.
As the query is a global query (not client dependent), a modification in the query also affects to the other clients. In this case this modification has been transported to all systems as well...
To correct that situation we want to identify the changes done by the user or retrieve the old version.
One solution would be to create one transport request from an external SAP system, with the same SAP version(ECC 5.0), and transport it to our system.
Before trying with this solution we want to know if there's any SAP standard tool to retrieve/compare query versions.

Assignment of One Solution ManagerDiagnostics Agent to Multiple SAP Systems

Dear Experts,
according to the Powerpoint presentation attached to SAP Note 1365123, one single Solution Manager Diagnostics Agent can be used for E2E RCA with multiple SAP systems running on its physical host.
I have installed one Diagnostics Agent on a server where three ABAP systems are running. Each ABAP system on this server has been installed under an alias (i.e. all these SAP systems are reachable under the same IP address. No virtual servers with individual IP addresses have been defined.). I want to configure each ABAP system for E2E RCA. When running the Managed Systems Setup procedure for E2E RCA, I am not able to assign the diagnostics agent to more than one of these ABAP systems - after the first system has been configured for E2E RCA, the entry for the Diagnostics Agent on this particular server is no longer available in the drop-down list of Diagnostics Agents when configuring the next system.
Is my understanding of the presentation mentioned above wrong, or am I missing a trick here? How can I assign the Diagnostics Agent to all three SAP systems that are running on the same physical host?
Details about the environment:
SAP Solution Manager: SAP EHP1 for Solution Manager 7.0 (SP Level 24)
Diagnostics agent version : 7.01.7.0.20100326100205
Thank you for your time,
Rainer Walter

Hello,
Have you followed all the rules?
Rule 1
Consider the diagnostic agent as a standard SAP system
Rule 2
Install one Diagnostic Agent per host (Physical or Virtual) (You mentioned you don't have virtual hosts)
Rule 3
Each Diagnostic Agent gets mapped to the SMSY repository using the server name key
Rule 4
Do not install a Diagnostic agent on a host that only run databases or SAP Central Services
Rule 5
An Agent can only conenct to one single Solution Manager System
If you install multiple Diagnostic Agents on the same host, each one needs to be connecting to a different Soltuion Manager system
Rule 6
Choose the adequate diagnostic agent installer/version
Rule 7
In a switch over scenario diagnostic agent must move with their respective virtual host and managed components
These are the rules attached to SAP Note 1365123. You need to comply to the rules.
If you have multiple agents ont he same host, then they need to conenct to different solution manager systems....according to the rules. One agent per physical host is one of the rules...specifically rule #2. This is my take, and it seems pretty clear here.
Regards,
Paul

How to find CUSTOMER EXIT for a Standard SAP program

How to find CUSTOMER EXIT for a Standard SAP program

Hi
To introduce the techniques of enhancement in standard SAP system. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
They do not affect standard SAP source code.
When you add new functionality to your SAP System using SAPs exits, you do not alter the source code of standard SAP programs in any way. The code and screens you create are encapsulated as separate objects. These customer objects are linked to standard applications, but exist separately from SAPs standard software package.
They do not affect software updates.
When you add new functionality to your SAP System using SAPs exits, your objects (called customer objects) must adhere to strict naming conventions. When it comes time to upgrade a to a new software release, customer objects names ensure that they will not be affected by any changes or new additions to the standard software package.
Customer exits are not available for all programs and screens found in the SAP System.
Any change made to an SAP object in a customer system is called a modification. Customers usually modify their systems for one of two reasons. Either they make changes to the SAP standard in order to adjust the R/3 System to their specific business needs (actual modifications), or they alter individual SAP objects in order to correct an error (as recommended in an SAP error note).
You should only modify the SAP standard if the modifications you want to make are absolutely necessary for optimizing work flow in your company. Be aware that good background knowledge of application structure and flow are important prerequisites for deciding what kind of modifications to make and how these modifications should be designed.
SAP application programmers create SAP enhancements in transaction SMOD using function module exits, menu exits, and screen exits.
Customers are given a catalog containing an overview of existing SAP enhancements. They can then combine the SAP enhancements they want into an enhancement project using transaction CMOD.
SAP enhancements are made up of component parts. These components include function module exits, menu exits, and screen exits. A specific component may be used only once in a single SAP enhancement (this guarantees the uniqueness of SAP enhancements).
Customer enhancement projects consist of SAP enhancements. Each individual SAP enhancement may be used only once in a single customer enhancement program (this guarantees the uniqueness of a customer project).
SAP application programmers preplan function module exits, menu exits, and screen exits for their applications and combine them to create useful enhancements for the R/3 System.
Customers create their own enhancement projects for their systems using SAP enhancements. You can customize the individual components of an enhancement project by creating your own include programs (for function module exits), texts (for menu exits), and subscreens (for screen exits).

Populating our log message along with standard sap log in ck11n.

Hi all,
I have developed a user exit which is used in costing of material using ck11n.
Here i have to show our custom log message along with the standard log shown by standard sap system after costing run is complete.
I got one FM-- CM_F_MESSAGE which is used by SAP. But i want the message along with SAP messages and not separately.
Can u help me out for this. its very urgent.
Thanks in advance.

Hi
I'm not sure because I don't know that trx, but I seem the function group of that function manages a log, so you can try.
This is an extract of abap code of SAPLCKDI where that fm is used:
CALL FUNCTION 'CM_F_MESSAGE'
   EXPORTING
     ARBGB = Y_CMF-CK
     MSGNR = '327'
     MSGTY = Y_CMF-W
     MSGV1 = SICHT
     MSGV2 = KLVAR.
So I suppose you should call it by this way:
CALL FUNCTION 'CM_F_MESSAGE'
   EXPORTING
     ARBGB = <your message class>
     MSGNR = <message number>
     MSGTY = <message type>
     MSGV1 = <text 1>
     MSGV2 = <text 2>
     MSGV3 = <text 3>
I think MSGV* is optional parameter.
Max

Logon to SAP system failed

my system logon failed .
i am not able to logon to my ides system. server is starting but while logging into the system by using user name and passward
the following error is coming
user account not in validity date
some other information is also available
logon to SAP system failed
the system description "NEW" cannot be found in the system list.
Make sure that saplogon.ini exists and choose an existing system description in the system list.
Regards

Check with your Basis. Your account validity is expired. Ask them to increase the validity.
The INI also does not exist on your system. Take the file from Basis and paste it on your PC.
Arti

Transportation Zones available in Standard SAP system

Similar Messages

Maybe you are looking for