Transporting error! While transporting Number Range Object

Hi All,
Thanks in Advance.
I have created a Number Range Object(Not a interval range) in Development Box(SNUM). (We have 2 production box) I transported the Number Range object to 2 production box.
Number Range Object Transported successfully for one box. But It is not getting transport into other box.
Could you please help, to solve this problem.
is there any configuration?
<b><u>Error Log Detail.</u></b>
ADO import (12) Cancelled
Log generation messages ....................................... (000-999)
Log generation messages ....................................... (000-999)
Ended with return code: ===> 12 <===
Deleted from buffer ( Ended with errors )
I don't know, how to resolve this error.
Thanks Again!
Regards
Anand

Hi,
Please refer to the SAP note : 132020
Symptom
With the import of a transport request or the import of a patch with the SPAM, tp terminates during the ADO import with return code 12.
In the ADO import log file of the request, cancelled jobs are refered to. With transaction SM37, you can find a cancelled job, suitable for the import RDDDIC1L, in the job log with one of the following messages:
ABAP runtime error: ASSIGN_OFFSET+LENGTH_TOOLARGE
ABAP runtime error: Exclusion criterion "RDDDR310_ERR02" initialized
Additional key words
Cause and prerequisites
The ADO data file was not generated locally on a transport domain computer, rather it was, for example, transported with ftp and unpacked from out of an archive with CAR.
Solution
One cause could be that the data file for the ADO import was not transferred correctly. To check this, the following derivation steps are required:
Start the operating system command 'R3trans -l <Datenfile>' and check whether the data file for the ADO import is corrupt.
Assumed that a transport request is called C11K900123, the respective ADO data file D900123.C11 is also like this and stands in the subdirectory 'data', in the transport directory.
Compare the size of the data file in the transport directory with that of the original file. The size must be identical.
If a check shows that the data file is corrupt, transfer the data file again.
Award points iff it helps.
Regards,
GSR.

Similar Messages

Error in MIGO :Number range object for object J_1IINTNUM, year 2010, excise

Dear Experts,
While posting MIGO, System throws below error :
Mainintain number range object for object J_1IINTNUM, year 2010, excise
Maiintain number range object for object J_1IRG23A1, year 2010, excise
Maintain number range object for object J_1IRG23A2, year 2010, excise
Actually we are posting the MIGO for the fiscal year 2009, still i am getting error why ?
regards
rajakarthik.

check the posting date what u r puting , it should be on or before 31/03/2010
i think this is only the issue dont looks like any other issue
or do one thing just o\go in SNRO and for J_1IINTNUM object put 9999 year and the number range
and try to post your transaction in 2009
hope this helps
Edited by: Umakant Bhangale on Apr 1, 2010 10:22 AM

Error while entering number range

Dear All
While entering number ranges for Assets using t-code AS08 i am getting the following error:
Company code........ 2000 does not exist
Message no. NR011
The company code 2000 is assigned to Chart of depreciation also.
Please advice.
Thanks & Regards
Kanwaljit

Hi,
In AO11, for your company code 2000, you might have assigned a diff company code for number range as cross company code asset number range.
Change it to 2000 and then go to AS08 and enter 2000 and enter the required number range intervals to it.
Thanks,
Srinu

Transport Error while transporting ID TR (Target Business System not found)

Hi Gurus,
We are facing a issue with transports while transporting a ID transport to Prod from QA.(We are using CTS+)
Its our first transport to PROD and we have checked the configuration for BC Application Server in Administration ->Content Maintenance and all looks good .
Our SLD is looks as below
We have shared SLD for Dev and QA and it looks as below
Dev's BS has target business system of QA BS
And in Prod Sld looks like as below
QA's BS has target business system of Prod BS
When we transport from Dev To QA transport works fine but when we transport from QA to Prod its gives below error and in error its points that target for Dev business system is not found in Target SLD.
We thought we should try to point Dev BS ====>>Prod BS may be that might work work but its also giving error same error.
Below mentioned is the Error
class java.rmi.RemoteException:
ClientServerException exception:Import failed because of business system transfer of object Service BS_ACN_MDH_DEV:Obligatory transport target for business system BS_ACN_MDH_DEV not found in System Landscape Directory
com.sap.aii.ib.core.transport.api.TransportCsException: Import failed because of business systemtransfer of object Service BS_ACN_MDH_DEV: Obligatory transport target for business system BS_ACN_MDH_DEV not found in System Landscape Directory
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.TransportPostprocessor.postprocessTransport(TransportPostprocessor.java:741)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.DirImportPostprocessor.postprocess30Import(DirImportPostprocessor.java:62)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.InternalPostprocessingService.postprocess(InternalPostprocessingService.java:205)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.PostprocessingService.doPostprocessing(PostprocessingService.java:171)
#at com.sap.aii.ibdir.server.pvcadapt.XIDirPropagationProvider.transportFinished(XIDirPropagationProvider.java:90)
#at com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcImport(PvcTransport.java:107)
#atcom.sap.aii.ibdir.server.transport.impl.pvc.DirPvcTransport.pvcImport(DirPvcTransport.java:74)
#atcom.sap.aii.ibdir.server.transport.impl.service.InternalDirTransportServiceImpl.pvcImport(InternalDirTransportServiceImpl.java:142)
#at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:721)
#at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importXiStream(InternalTransportServiceImpl.java:500)
#at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importXiStream(TransportServiceImpl.java:265)
#at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:306)
#at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
#atcom.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
#at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
#at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl1_0.process(HmisLocalLocalObjectImpl1_0.java:144)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
#at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
Can you guys please help out in resolving this error.
Thanks in Advance.

Hi,
I assume you have two SLDs(SLD1 - for Dev and QA , SLD2 - for Prod) and PI 7.0 or XI 3.0.
In this case the ideal solution would be to
1. set up a SLD bridge between your Dev/QA SLD and Prod SLD. The bridge basically forwards all the Technical system SLD info to Prod. SLD.
2. Import Dev business systems information into Prod.
3. Then create transport target,
Make sure that you have created Business Groups for Dev/QA/Prod properly
Edited by: Nageshwar Reddy on Mar 17, 2009 8:29 AM

ODS Activation Failure due to Number range object for characteristic ZTXLEV

Hi
I am having problem regrdng ODs actvtn failure,I am gettng Error mssge as Number Range Object for Char ZTXLEVAIN doesn't Exist
can anyone help me
thanks
KINDLY SEND MAIL TO [email protected]
srinivas

HI,
check this
Error calling number range object 0MATERIAL for dimension D4 ( )

Number range object for characterstic DATE does not exist

When I am trying to load data from ODS to cube getting below error message.
"Number range object for characterstic ZEXTDATE(Source extract date) does not exist".
In update rules we are trying to convert this date Infoobject(Char) into Key figure.
If anyone had exp with similar issue please reply.
Thanks in advance
Vani

Hi Vani,
Is ZEXTDATE Characteristic have any data in it? Can you check once.
Veerendra.

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

Transporting Custom Number range Objects

Dear SRMers
System Information: ECC 6.0,
We created Z Number range objects for Eforms in ECC system A , created a Transport Request with the tasks containing the individual Number range objects and, released the transports in SE10 and transported them to ECC System B (with Basis Admin help).
After the moving the transports, we see the individual custom objects in System B, but the number ranges defined are missing for each object. The Basis admin tried couple of approaches but was not successful.
If any one has come across, this problem, please advice.
Points will be rewarded for answers.
Thanks in advance,
Best Regards,
Bob

Hi,
In transaction SNRO enter the Z number range.
Press the "Number Range" button (F7)
Press Interval-->Transport.
That should create a transport for you.
Cheers
Rob

Errors while transporting the Business Content

hi all,
we are facing a few problems while transporting the Business Content from the Development systems to the Quality System.
it says Method Execution - Action Cancelled.
am pasting a part of the error messages also... kindly have a look at it and get back to us at the earliest as we are in the process of going-live...
   Start of the after-import method for object type R3TR IOBJ (Activation Mode)
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   InfoObject 0ACN_CATGRY (in compound of characteristic 0ACN_EANUPC) not (act.) available
   Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
   Attribute 0ACN_DEAL from characteristic 0ACN_EANUPC not (actively) available
   Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Ended with return code: ===> 12 <===
please revert bact at the earliest....
Thanks
Manicks

hi Manicks,
check if oss note 903291 helps
Transporting DataSources
Transport problem ...Urgent
Transport Issue
Number range object missing NRIV and cant activate IOBJ during import
try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists.
also try >> all combined tests >> master data >> check master data for characteristics.
or run program RSDG_OBJNUMG_CREATE_INTERVAL
have a try oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07

Number Range Object error

I created a number range Object in SNRO Trans, but while saving that object it is showing this error as 'Invalid call sequence for interfaces when recording changes' and further i am not able to proceed.

Rama,
What number range are you creating?
This error seems to be from the transport system. It is trying to record the changes into a transport request.
Cheers
Aneesh

Error in Number range object - URGENT

I changed one attribute(let say X) of a characteristic(A) from dis to nav and transported to QA. The transport failed saying that the intervals for the number range object for X does not exist.
In DEV RSRV check on X, A shows no errors
any suggestions how can I fix this prob

try attribute change run first if dont work try this
you can increase the number range buffering size... go to se37 use functional module rsd_cube_get and then click on the test/execute(f8) button, then put in your cube name , then for i_obj put in a and then for i_bypass put in x press the execute button. the click on the blue icon next to E_T_DIME. you se your dimensions there. you now need to increase the buffer size for the dimensions that are receiving high volumes of records. so on the same screen not the dimention tht you want to increase the size of, scroll to the right hand side extreme and note down the NOBJECT number starts with BID. then go to transaction SNRO, put in the number you noted down and click on the change icon.
Now in the edit tab on top drop down set up buffering and select main memory.
now under "No. of numbers in buffer type in 500
save and click yes to continue
setting the number range too low will not help in load performance significantly, whereas setting it too high will consume a lot of memory on the application server, which will effect other applications.monitor the memory usage during data loading to find an appropriate number.
hope this helps

Error when creating interval for number range object

Hi,
I am trying to transport my BW stuff from QA to Production and I am getting the following error in the transport logs. The info objects are inactive in RSA1.
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
Characteristic YRESD: Error when creating interval for number range object BIM0000396
Can some body advise me what's wrong? Is something need to be maintained in number ranges?
Also when I am checking the objects in RSA1, I am getting a message saying "source system WD110 does not exist", WD110 is our dev system. How can I change the source system after transport?
Thanks.
Edited by: Raj G on Mar 20, 2008 11:38 AM

Also when I am checking the objects in RSA1, I am getting a message saying "source system WD110 does not exist", WD110 is our dev system. How can I change the source system after transport?
Which system are you checking this?
refer: Re: Transport Source Systems from DEV to Testing for step to map the source systems for transport

Error while transporting a Workbook

Hi Pioneers
I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".
Could u let me out with a possible solution....Plz...
BR
Sekhar.D.R

Hi,
You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
Hope this helps
Assign points if useful
Regards,
venkat

Error While Transporting Transformation

Hi Gurus, I have this issue that I am getting an error while transporting Transformation. I made sure that that only transformation is sected and nothing else. I am getting this error message while importing it in BWQ environment "Formula 4AY060939P5D2NKRXKMJFECLS is already locked in the requests of other users or the system is set so that formula 4AY060939P5D2NKRXKMJFECLS can no longer be changed."
I was wondering, if this is locked by some other object or transport request, how can I find that out? Thanks in advance for all the help.

Hi,
You can check if the request is locked by another transport in BWQ by using the transaction SE03.
First find the object directory entry for your object(you can take this from your transport. Go to SE03 --> 'Search for Objects in Requests/Tasks '. Under object selection enter the details as in your transport and select the check box against your new entry. Under Request/Task selection, select 'Modified' and 'Released'. Execute. You will now see a list of transport requests that contain your transformation. Check these & either release them or delete your object from the modifable transports. Re import your transport.
You can check if this object was locked by a person using the transaction SM12.
Regards,
Shilpa

Error while transporting Openhub (BI7)

Hi Gurus,
I am getting an error while transporting the open hub. In the dev system it worked perfectly but when i transport it to quality, it is showing the following error.
"Unable to activate table /BIC/OHZxxxxxx ."
When i checked the table in quality it says that /BIC?OHZxxxxx-0UNIT ( Reference field ) does not exists. But 0UNIT is there in the DSO on which i developed the openhub and the infoobject 0unit is also active in quality system.
Why this error is happening?
Regards,
Raghavendra.

Hi Raghavendra,
There are chances of missing some objects in transport request wile assigning objects to request...please check the objects list and open hub structure.
and also plsease check the 0Unit field status in Quality system.if it is in modified status means make it it active ststus.
Please create one more transport request and validate the tr objects...
Best Regards,
maruthi

Transporting error! While transporting Number Range Object

Similar Messages

Maybe you are looking for