Transports of plants failed

HI Experts,
i am stuck in one issue like below scenario
i have created total 10 plants from Reference plant (EC02) TR(Transport number) also created .. but some configuration part was missing so Created one separate TR for all 10 plants(transportation zone assignment ) . later 5 plants TR has been Marker for do not transport & 5 plants TR has been moved to quality server along with that separate TR. . So in quality server all 10 plants are visible(t001w) but 5 plants are well configured & reaming 5 plants has missing entries. it is happened due to that separate TR for all 10 plants.
now please suggest how to delete these remaining 5 entries from Quality. what are the effects we have to take care now?
Regards
Raj
Sbuject was edited by: Jürgen L

Hi,
If there is no transaction data and other dependent configuration in dev and quality for these plants, you may delete the plant from dev and move the TR to Quality. The same changes will be affected there. If you have documents in the plants to be deleted, I would suggest to archive these docs and then delete the plant.
Regards,
AKPT

Similar Messages

Customer & Vendor not transported via Plant tCodes WB01/2 or WB07/8

Hello,
We have change control enabled in our Dev, instance/clients SAP 4.7 IS-Retail , Basis 6.2
Looking for help in understanding the necessary steps to transport the Plant Vendor and Customer records.
The transport includes Plant records, but in the destination client the Customer and Vendor records that
are automatically created via WB01/02 are not being included in the transports?
Would appreciate any advice on how we transport the Vendor and Customer records that automatically
get created via WB01/2 in the source client to the destination client.
If we try to use XD01, XK01 the system enforces the Customer/Vendor records can only be maintained
via the WB## transaction codes for IS-Retail.
Have tried using WB07/08 and included in a transport, but still the Customer & Vendor master records
are not being included in the transport.
Any ideas?
Regards, Ron.

WB02 can not be used if the Customer and Vendor are not created implicitly via WB01, this
is why the transport methodology is failing, See below. We were able to use WB01 on an existing
Plant that had been transported, to maintain/create the Customer and Vendor relationship,
but this produced inconsistent CO relationships that caused ME59 to fail.
Note, you can not use XD01/XK01 for Customer/Vendor maintenance as it would pertain
to Plant Customer Vendor relationships, this must be done via WB## t-codes.
What we have found is that exporting and importing plants includes the Customer & Vendor
coupled to the Plant. However the export and import WBTE,WBTI capability is not working
properly as is similar to the transport capability.
So, we have reverted to manually creating the Plant in each Instance Dev "IMG Gold Client",
Test, Pro to complete this requirement. This has proven to work, but transports and or
export/import have proven to not work as expected. Probably specific issue with SAP
IS-Retail.

Transport of Transformation failed with RC= 12 and job: RDDEXECL cancelled in Target sytem

Gurus,
When i am importing the workbench request from dev to qty.
I am getting error : Program terminated (job: RDDEXECL, no.: 22321300).
Transformation contains only Endroutine.
Job log:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server xxxxxx were synchronized
The internal session was terminated with the runtime error UNCAUGHT_EXCEPTION (see ST2
Job cancelled.
When i see the dump it is througing errror at the method of following class.
CL_RSO_TLOGO_PERSISTENCY-CHECK_INITIALIZED
Could you please help. Thanks in advance.
Ashok

Hi Ashok,
In QA use program "RSTRAN_ROUT_RSFO_CHECK" to check and remove any inconsistencies for the transformations. After that again transport those transformations in new TR and import in QA.
Also you have to search "Transport of Transformation failed with RC= 12 and job: RDDEXECL canceled in Target system" by Dinesh Tiwari.
Check the reply of Fun Sébastien in http://scn.sap.com/message/13795238#13795238.

CSoap Excep Transport Http receive failed with Excp Commc_failure(100.101)

Hi Experts;
Am working with adobe forms. T-code SFP (Form Builder)
I have created a adobe form, Layout and all...
when i Activate the Form, it's not Activating and it's showing the Status information like...
Status Information: SOAP Framework error:SOAP Runtime Exception: CSoap Exception Transport: Http receive failed with Exception Communication_failure(100.101).
Please Give your Suggestions !!
Thanks
Upender.

Hi wd4a Adobe community
here is another guy who has exactly the same problem trying to reproduce the example of: INTERACTIVE FORMS BY ADOBE IN WEB DYNPRO ABAP - INTRODUCTION ( http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/806cf26c-22e7-2c10-8ca3-a671648fd2ea ).
Anyone out in this world who has a suggestion?
thanks in advance ...
Stefan

Purchase Order to Order Based Transportation Request Scenario Failing - POP_TransportationRequestSUITERequest_Out

Hi Folks,
We are configuring an Integration Scenario between SAP ERP & SAP TM. Where we expect when we create or change a Purchase Order in the ECC system we expect an Interface "POP_TransportationRequestSUITERequest_Out" to be triggered and create an OTR in the SAP TM system, which is not happening rather there are other 4 interfaces getting triggered and those are as below
PurchaseOrderERPRequest_Out_V1
PurchaseOrderERPReplenishmentOrderCollaborationNotification_Out
PurchaseOrderChangedInformation_Out
PurchaseOrderCreatedInformation_Out
The below are the configurations we did in ECC
Output Type: TRP0
Processing Program: RSNASTED
Form: INITIALIZE_WORKFLOW
Note: When we create a PO the TRP0 output type doesn't appear in the Output Type (ME22N->GoTo->Messages) automatically.
Appreciate your expert advice.
Regards

Forwarding to financial accounting for the creation of accruals requires a service entry. Every service entry sheet is based on a purchase order. Determining this purchase order is the first stage for forwarding to FI and therefore the first stage required for carrying out settlement
This purchase order must first be created in Purchasing. Important criteria for the purchase order are:
Service agents
Purchasing organization
Purchasing group
Plant
Item category
You must create the purchase order for a service agent. The purchase order can be valid for the following periods:
Day
Week
Month
In Customizing the purchasing organization, the purchasing group and the plant must be assigned to the corresponding transportation planning point and the shipment cost type. You make these settings in the IMG. Choose Logistics Execution ® Transportation ® Shipment costs ® Settlement ® Assign purchasing data.
rgsd
madhu

Transport Request got failed due to Source system does not Exist

Dear All,
I Have collected All data soruces which are related to R3 data sources and Flat File data sources...
After import the transport request it got failed due to Flata file source system does not exist in BI quality system.
But all data sources related to R3 and R3 Source system has been moved which are available in BI Quality sytem also.
why Flat File source and data source are moving.. why i am not sure it was throuing error message called Source System does not exist..
Thanks,
Ven

Dear Venkat ,
Go to Quality system .
Use RSA1 Transaction --> go to Tools --> Manage Source System :
Here you can map the entry of system ..
Second : go to Development system under RSA1> Transport Connection and click on Source system button first --> select your source system ---you can select multiple entry also ..collect your data source ( with before and after option ) and deselect which object you do not need ..And select collection mode to automatically ...
use the transport button to create transport request and release from development system .
I hope you will not get error in Q system .
If still facing error , Please let me know.
Regards
Vikas Sharma
Robert Bosch
Edited by: Vikas Sharma-Bosch on May 5, 2011 5:34 PM

Stock Transport in Plants Abroad and Tax Reporting

Hello,
We have Plants Abroad and we need to account stock transports between
our plants abroad. We have defined a billing document type for
determining taxes for plants that are abroad, so it appears on Tax
Report and EC Sales List. The issue is that, although the customer
name appears on the billing document, as the stock transport is between
plants of the same society, it does not appear on the accounting
document. So it does not appear on the Tax Report or EC Sales List
neither and this field is necessary for the reporting (but the CIF number appears correctly).
Can anyone help me in this issue?
Thank you,
Silvia

Hi Silvia
If my understanding is correct, you need to generate a report wherein it should show abroad plant wise items sent and quantity.
For this, the material movement should have been 631 and to track the despatch details, goto MB51 and give the movement type in the "Movement Type" field and execute.
Thanks
G. Lakshmipathi
reward please if this helps you

Error during Stock Transport Order plant assignment to vendor

Dear All ,
       I am configuring Inter Compay STO . For that I have created a Vendor(Plant 1000) for a company code 1010 and trying to assign Plant 1000 which belongs to Company code 1000.
      But System is giving error Plant 1000 is already assigned to Vendor 491000.But when I want to display this vendor this vendor is not in the system . This error is coming in production server. We have been using SAP since April 2009 and we have SAP best practices implemented . I remember this vendor number was SAP Best practice vendor for STO which is no more in database.Same error is coming for assignment of plant 1010 also for company code 1010 which is also best practice company code.But for Plant belonging to Company code 1020 no error which was configured by us .
       Please guide me what I have to do to rectify this error.
Regards
Abhijit

you probably entered this 491000 vendor number in customizingin development client and then transported the customizing to production. So your table T001W has this development master data number in the vendor number field for your plant.
We usually create the vendors and customers in production and transport them then with ALE scenario into the DEV system to have the master data there with the same number when we start customizing STO scenarios.
You have to erase the wrong vendor number from T001w with table maintenance tools (if such is allowed in your production system) then you can assign the correct vendor.

Transportable Tablespace Importing - Failed to read stderr from process

Hello,
I'm using the normal EM console packaged with Oracle (10gR2) and am trying to import a tablespace on RedHat rel4.
I follow the Transport Tablespaces link on the maintenance tab and get the option of export or import and also the place to put the host credentials in. I select import, enter the credentials and click continue and am given this error: Failed to read stderr from process.
I've tried logging into EM as SYSTEM, SYS, and a DBA account I use and have used both root and the oracle account with no luck.
Searching hasn't gotten me any useful results here or in metalink so I'm stuck. What am I missing?
Thanks

Thank you thank you!
The short version is I traced it back to an error with /bin/nmo which traced back to a failure to run root.sh when upgrading to 10.2.0.3.
Thanks again!

IS-OIL TD - bulk transportation using Plant intransit.

Hi,
I need an advice on using TD bulk transportation scenario (IS-OIL).
We are implementing industry solution "SAP for Mining" in our company. I'm trying to setup TD bulk transportation using intransfer plant. But I can't use Plant from Vehicle master data (trn O4V2) if it is differs from the Loading plant. It is possible to use intransit storage location only. Business requirement is to create transfer postings from Loading plant to Intransit plant during Load confirmation.
Does anybody knows how to reach this requirement? I'll appreciate any ideas!
my e-mail: [email protected]
Vadim

Hi Vadim - Under the two plant to plant config under MM - Transaction OMGN tou will see that can activate the tick for one step. if it is activated you the system will then post a 647 movement for the outbound delivery e.i. issue the product from plant and receive it in the to plant at the same time.
transaction flow.
1.) Create a plant to plant PO. ME21N
2.) Create a outbound delivery VL10D
3.) Post Goods Issue (with the indicator set for the one step the system will post a 647 movement (from plant / to plant in one step instead of two step, 641 , 101)
Hope this helps

Transport request migration failed with return code 12

Hi ,
A transport request was created to capture deletion of bex query via Tcode RSZDELETE. The deletion TR was moved to Quality box successfully and query got deleted. But when same TR was moved to Production box, TR failed with return code 12. Program terminated (job:RDDEXECL). Upon checking the job log overview for this job, runtime error ITAB_DUPLICATE_KEY happend causing session to terminate. can anyone pls suggest me how to fix this issue and why this has caused. Need to fix this immediately as it is in production environment. Please help.
In ST22 i could see the below error details:
Thanks,
Vishnu

as per the dump, system is trying to insert a unique number which is already in the system. You sure the transport is only for deletion of the query? Can you please check the import logs in the test system and should tell you what action performed during import.

Transport for MP failed - Says assignments not maintained

Hi guys,
I tried to transport a MP and it failed saying that Assignments for InfoObjects have not been maintained. I am not sure wht it means. Infoobjects seem to be properly assigned.

Hey, maybe an infoobject is missing in the target system.
Manually check and see if all infoobjects used are Active in target system.
Did you try re-importing it.
Uday-Ram Chamarthy

Import CTS+ transport into Portal failed with Returncode:'12'

Hi, Gurus!
I have encountered the problem while deploying CTS+ transport to the Portal (system XO3): Returncode:'12' class java.io.IOException:
The file (
\solman.mycompany.com\sapmnt\trans\data\BIGK900007\ctsplus.par) does not exist on the filesystem.
Full log text:
| ######################################
| Deployment
| Transport request : BIGK900007
| System : XO3
| tp path : tp | Version and release: 372.04.71 700
| Deploy Service called with following parameters:
| CommunicationData-Type:0
| CommunicationData-Address:http://portalXO3.mycompany.com:50218
| CommunicationData-Host:portalXO3.mycompany.com
| CommunicationData-Port:50218
| CommunicationData-User:'filled'
| CommunicationData-Password:'filled'
| Deployable(0) | Deployable-Type:0
| Deployable-Id:
solman.mycompany.com\sapmnt\trans\data/BIGK900007/ctsplus.par
| Returncode:'12' | class java.io.IOException:The file (
\solman.mycompany.com\sapmnt\trans\data\BIGK900007\ctsplus.p
| >>>ar) does not exist on the filesystem.
| Deployment
| End date and time : 20100106154329
| Ended with return code: ===> 12 <===
| ######################################
The file ctsplus.par does exists at the right place and available from the Portal machine.
Especially strange looks the Deployable-Id: *
solman.mycompany.com\sapmnt\trans\data/BIGK900007/ctsplus.par*
Maybe the different slashes "\" and "/" are the cause of the porblem? Both systems (Portal and Solution manager) run on Windows 2003 Servers.
I have checked the "Note 1232674 - class java.io.IO exception during import" and set up the full control permissions to access "\sapmnt\" for the local (solman) user SAPServiceXO3 but it does not help.
I've created a local "SAPServiceXO3" user in the server of Solman and have given to it highest permissions to the file share. Has anybody any idea how to resolve the problem?
Thanks in advance.
Edited by: Mikhail Palstsianau on Jan 28, 2010 8:47 AM

Hi,
Due you have common trans directory for all the system ???
Thanks
Anil

Determine production version in cross plant failed

Hi folks:
I trying customizing and implementing a cross plant scenario:
*_Plant A01 - Production Plant_*
*+-- Material Mat001*
           +-- MRP 2 Procurement Type: E
           +-- MRP 4
                  1--- Selection Method: 3
                  2--- ProdVersions:
                           +--- Production version 001. Valid from / to 01.01.2000 / 31.12.9999
                           +--- Production version 002. Valid from / to 01.01.2000 / 31.12.9999
Plant A02 - Planning Plan
*+-- Material Mat001*
           +-- MRP 2 Procurement Type: E
           +-- MRP 2 Special Procurement: 80 ( to Plant A01 )
           +-- MRP 4
                  1--- Selection Method: 3
                  2--- ProdVersions:
                           +--- Production version 001. Valid from / to 01.01.2000 / 31.12.9999
                           +--- Production version 002. Valid from / to 01.01.2000 / 31.12.9999
Also, call transacction COR4 and change "order type parameters" to : "automatic selection of production version" for both plants.
But, i when run MPS ( MD41 / MD42 ) for material Mat001 in plant A02, production version is missing ( blank ).
Any ideas?
Someone has used badi MD_MODIFY_PRODVERS?
Thanks in advance,
César.

Hi All:
Well, I made a mistake. Do not update the selection method for the material in the planning plant.
Final Data |
Plant A01 - Production Plant
+-- Material Mat001
+-- MRP 2 Procurement Type: E
+-- MRP 4
1--- Selection Method: 3
2--- ProdVersions:
+--- Production version 001. Valid from / to 01.01.2000 / 31.12.9999
+--- Production version 002. Valid from / to 01.01.2000 / 31.12.9999
Plant A02 - Planning Plant
+-- Material Mat001
+-- MRP 2 Procurement Type: E
+-- MRP 2 Special Procurement: 80 ( to Plant A01 )
+-- MRP 4
1--- Selection Method: 3 <<<<<< WAS NOT UPDATE !!! >>>>>>>
I test badi MD_MODIFY_PRODVERS, but not necessary today.
Thanks ,
César.

Stock Transport from plant to MRP Area

I have been looking for explanation on how to handle replenishment of MRP area storage location stocks within a plant. We use Special procurement types but they are set up on for plants, not MRP areas. Can anyone explain how this works and the configuration to make it work? Were setting up a warehouse as an MRP area and need to replenish its stocks with MRP.

Aren't your questions answered in SAP online help?
Integration
The process is the same as for Storage Location MRP. In contrast to the storage location MRP, you can use all MRP procedures and are not limited to the reorder point planning procedure.
Prerequisites
In Customizing for MRP, you have created the special procurement key for Stock transfer from plant to MRP area for the plant in which the MRP area is located. You have defined the following parameters:
- Procurement type: F for External procurement
- Special procurement: U for Stock transfer
- Plant: Number of plant, to which the MRP area belongs.
In the material master, you have created the MRP area segment and assigned the special procurement key Stock transfer from plant to MRP area.
Features
During MRP, the system generates a stock transfer reservation for the material in the MRP area and a material reservation in the plant MRP area.
The external procurement storage location that you have entered in the MRP area segment of the material master is used as the receiving storage location. If you have not maintained this field, the system uses the receiving storage location that you entered for the MRP area in Customizing.
The actual procurement is processed by the plant. With stock transfer to the MRP area, you carry out the transfer posting for the material with reference to the reservation.
Standard procurement key 45 is for that purpose: plant: 1000 (V460A-WERKS), procurement key F; special procurement: U; plant: 1000 (V460A-WRK02).
So, in both fields you have to write the same plant as it is clearly written in SAP onilne help.
As SAP help says: a Stock transfer reservation is created. Using MIGO (A08; R09) you can post the goods movement by mvt 311 with reference to the Stock transfer reservation (MB1A is also good).
Why don't you test in in your sandbox system and you will see how it works.
(If you want to use STO (purchasing document type UB) in this process you have to go trough OSS note 599915)
Edited by: Csaba Szommer on Jun 12, 2009 11:46 PM
Edited by: Csaba Szommer on Jun 12, 2009 11:48 PM
Edited by: Csaba Szommer on Jun 12, 2009 11:48 PM

Transports of plants failed

Similar Messages

Maybe you are looking for