[TRASH]ASUS N61JQ - No Backlight after resume from pm-suspend

There are so many of these posts of issues with the backlight not resuming when the computer comes out of pm-suspend, but none have resolved my issue yet.
Details of my ASUS N61JQ
Radeon HD 5730
8GB Ram
i7 - 1.8GHz
BtrFs
No gui, command line only
Arch Linux - 3.16.4-1-ARCH
Fresh install (Tuesday)
running ?fglrx? from Vi0L0 (https://wiki.archlinux.org/index.php/AMD_Catalyst)
When pm-suspend is called, the computer suspends correctly, nice and neat. When a button is pressed the computer resumes, sorta...
the screen is black, I can type commands; 'reboot' reboots the laptop and allows me to log in and work. I'd like to not have to reboot from the resume.
I've tried many things today with reboots on each try:
#13 of: https://bbs.archlinux.org/viewtopic.php?id=180116
https://wiki.archlinux.org/index.php/Pm … om_suspend
creating a quirk in /etc/pm/sleep.d that turns dpms off and on using vbetool (even tried a sudo of that)
tried to blindly type sudo vbetool off 'enter password' then up arrow change off to on
tried that without entering password (fresh off of sudo pm-suspend)
Any other troubleshoot steps would be greatly accepted - even a point to another solution thread!
Last edited by snyper82 (2014-10-17 19:02:18)

trying:
https://wiki.archlinux.org/index.php/AM … eep_issues

Similar Messages

Fan Control fails after resume from pm-suspend

Hi,
i recently upgraded to 2.6.37 (on a hp nx6325 laptop) and noticed the following behaviour after a resume from pm-suspend:
The fan control stops working until cpu reaches a temperature of 60°. As soon as the temperatur passes this threshold the fan starts rotating at max. speed. Below 60°, the fan is turned off immediately.
pm-suspend.log:
disabled, not active
/usr/lib/pm-utils/sleep.d/01laptop-mode resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Don Feb 3 09:16:21 CET 2011: Finished.
Any ideas where to look for the problem?

I have the same problem with 2.6.37.1-1: suspend do not work.
The sceen goes blank then returns to X. The log shows the followings:
Feb 21 15:50:33 localhost kernel: Suspending console(s) (use no_console_suspend to debug)
Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Synchronizing SCSI cache
Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Stopping disk
Feb 21 15:50:33 localhost kernel: tpm_tis 00:03: Operation Timed out
Feb 21 15:50:33 localhost kernel: legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62
Feb 21 15:50:33 localhost kernel: PM: Device 00:03 failed to suspend: error -62
Feb 21 15:50:33 localhost kernel: PM: Some devices failed to suspend
Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Starting disk
Feb 21 15:50:33 localhost kernel: b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
Feb 21 15:50:33 localhost kernel: ------------[ cut here ]------------
Feb 21 15:50:33 localhost kernel: WARNING: at drivers/base/power/main.c:106 device_pm_add+0xb6/0xc0()
Feb 21 15:50:33 localhost kernel: Hardware name: HP Compaq 6715b (GB835EA#AKC)
Feb 21 15:50:33 localhost kernel: Device: misc
Feb 21 15:50:33 localhost kernel: Parentless device registered during a PM transaction
Feb 21 15:50:33 localhost kernel: Modules linked in: fuse ipv6 vboxnetflt vboxdrv snd_seq_dummy snd_seq_oss snd_seq_midi_event loop snd_seq arc4 ecb radeon b43 ttm drm_kms_helper mac80211 snd_pcm_oss drm snd_mixer_oss joydev snd_hda_codec_analog ssb tpm_infineon i2c_algo_bit cfg80211 hp_wmi mmc_core sparse_keymap tg3 ppdev rfkill snd_hda_intel parport_pc libphy pcmcia snd_hda_codec snd_usb_audio snd_pcm ohci_hcd yenta_socket pcmcia_rsrc pcmcia_core firewire_ohci snd_hwdep tpm_tis snd_usbmidi_lib hp_accel lis3lv02d i2c_piix4 video tpm snd_timer firewire_core evdev ehci_hcd snd_rawmidi crc_itu_t serio_raw snd_page_alloc tpm_bios output wmi input_polldev thermal battery lp sg ac container usbcore i2c_core button fan snd_seq_device shpchp parport edac_core edac_mce_amd snd pci_hotplug psmouse soundcore k8temp cpufreq_ondemand powernow_k8 freq_table processor mperf ext4 mbcache jbd2 crc16 sd_mod sr_mod cdrom ahci libahci pata_atiixp pata_acpi libata scsi_mod
Feb 21 15:50:33 localhost kernel: Pid: 12986, comm: pm-suspend Not tainted 2.6.37-ARCH #1
Feb 21 15:50:33 localhost kernel: Call Trace:
Feb 21 15:50:33 localhost kernel: [<ffffffff81056a1a>] warn_slowpath_common+0x7a/0xb0
Feb 21 15:50:33 localhost kernel: [<ffffffff81056af1>] warn_slowpath_fmt+0x41/0x50
Feb 21 15:50:33 localhost kernel: [<ffffffff812b8596>] device_pm_add+0xb6/0xc0
Feb 21 15:50:33 localhost kernel: [<ffffffff812aea8e>] device_add+0x4ae/0x5c0
Feb 21 15:50:33 localhost kernel: [<ffffffff812aebb9>] device_register+0x19/0x20
Feb 21 15:50:33 localhost kernel: [<ffffffff812aed53>] device_create_vargs+0x193/0x1b0
Feb 21 15:50:33 localhost kernel: [<ffffffff812aed9c>] device_create+0x2c/0x30
Feb 21 15:50:33 localhost kernel: [<ffffffff813a5fc1>] ? mutex_lock+0x11/0x30
Feb 21 15:50:33 localhost kernel: [<ffffffff8129a3fa>] misc_register+0x8a/0x140
Feb 21 15:50:33 localhost kernel: [<ffffffff8129d36f>] hwrng_register+0xdf/0x170
Feb 21 15:50:33 localhost kernel: [<ffffffffa0426ab0>] b43_wireless_core_init+0xdb0/0x11a0 [b43]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa0427068>] b43_op_start+0x1c8/0x1e0 [b43]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa0477a15>] ieee80211_reconfig+0x335/0x400 [mac80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa046d8b8>] ieee80211_resume+0x28/0x70 [mac80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d8a55>] wiphy_resume+0x75/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffff812b7ebe>] legacy_resume+0x3e/0x80
Feb 21 15:50:33 localhost kernel: [<ffffffff812b8025>] device_resume+0x125/0x130
Feb 21 15:50:33 localhost kernel: [<ffffffff812b8192>] dpm_resume_end+0x102/0x3a0
Feb 21 15:50:33 localhost kernel: [<ffffffff81096350>] suspend_devices_and_enter+0x90/0x1f0
Feb 21 15:50:33 localhost kernel: [<ffffffff810965d0>] enter_state+0x120/0x150
Feb 21 15:50:33 localhost kernel: [<ffffffff81095b16>] state_store+0xc6/0x100
Feb 21 15:50:33 localhost kernel: [<ffffffff811f3c27>] kobj_attr_store+0x17/0x20
Feb 21 15:50:33 localhost kernel: [<ffffffff8119f37f>] sysfs_write_file+0xcf/0x150
Feb 21 15:50:33 localhost kernel: [<ffffffff81135ac6>] vfs_write+0xc6/0x190
Feb 21 15:50:33 localhost kernel: [<ffffffff81135ddc>] sys_write+0x4c/0x80
Feb 21 15:50:33 localhost kernel: [<ffffffff8100bed2>] system_call_fastpath+0x16/0x1b
Feb 21 15:50:33 localhost kernel: ---[ end trace 19e4cbd37086936d ]---
Feb 21 15:50:33 localhost kernel: PM: resume of devices complete after 1300.325 msecs
Feb 21 15:50:33 localhost kernel: PM: Finishing wakeup.
Feb 21 15:50:33 localhost kernel: Restarting tasks ... done.
Feb 21 15:50:33 localhost kernel: video LNXVIDEO:00: Restoring backlight state
And the solution on linux.kernel: http://groups.google.com/group/linux.ke … 616cfdb4a9
Revert or wait!
Or rmmod tpm_tis.
Last edited by daroczig (2011-02-21 21:55:10)

Xfce4 will not lock screen after resume from hibernate/suspend

There have been a lot previous threads about this issue.
I cannot fix it. Furthermore, it's somewhat confusing.
Since this is a single user system (literally), I can get away with a systemd powered hack:
[Unit]
Description=Lock screen before switching power state
Before=sleep.target
[Service]
Type=oneshot
ExecStart=/usr/bin/sudo -u gebruiker xscreensaver-command -lock
[Install]
WantedBy=sleep.target
Is this a bug? Anyone who can report this functionality works?. I have:
xflock4 installed and working
xscreensaver installed and working
systemd working properly
no errors in ~/.xsession-errors
both config items ticked in
- xfce4-session
- xfce4-power-manager
Anyone?

Anyone who can report this functionality works?
Using the first option from the xscreensaver wiki article:
[Unit]
Description=Lock X session using xscreensaver
Before=sleep.target
[Service]
Type=oneshot
ExecStart=/usr/bin/xuserrun /usr/bin/xscreensaver-command -lock
[Install]
WantedBy=sleep.target
...in conjunction with:
both config items ticked in
- xfce4-session
- xfce4-power-manager
...and fade to and fade from disabled, works here for me.

Keyboard Very Glitchy + Speakers Clicking After Resume From Suspend

Hello,
Didn't know exactly where to post this, so I chose newbie. I have a very strange issue regarding suspending and resuming on my Arch64 box. When I resume from a suspend, everything seems to work okay, however first I hear this from my speakers:
*pop* [pause] *pop*
And then, when I use the keyboard, it responds very strangely. Every key still types what it should, but letters will be frequently either skipped over to carried out longer.
Here's a good example:
If I type this before a suspend: "Arch Linux rules!"
It may come out like this after the suspend: "ArcLinux ruuuuuuuuul!"
See what's happening?
So when this happens I must reboot, and then it works fine again.
My machine is an HP Pavilion DV7 6199us running on Intel graphics (sna acceleration) with the Radeon card disabled with acpi_call.
Xorg.0.log:
[ 2493.450]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 2493.450] X Protocol Version 11, Revision 0
[ 2493.450] Build Operating System: Linux 3.4.4-3-ARCH x86_64
[ 2493.450] Current Operating System: Linux alex-archlinux 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64
[ 2493.450] Kernel command line: root=/dev/disk/by-uuid/579476a1-f5d2-432b-b2f7-d543e65c579b modprobe.blacklist=radeon ro acpi_osi=Linux acpi_backlight=vendor
[ 2493.450] Build Date: 09 July 2012 03:59:39PM
[ 2493.450]
[ 2493.450] Current version of pixman: 0.26.2
[ 2493.450] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2493.450] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2493.451] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 25 22:56:28 2012
[ 2493.451] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2493.451] (==) No Layout section. Using the first Screen section.
[ 2493.451] (==) No screen section available. Using defaults.
[ 2493.451] (**) |-->Screen "Default Screen Section" (0)
[ 2493.451] (**) | |-->Monitor "<default monitor>"
[ 2493.451] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 2493.452] (**) | |-->Device "Intel Graphics"
[ 2493.452] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2493.452] (==) Automatically adding devices
[ 2493.452] (==) Automatically enabling devices
[ 2493.452] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2493.452] Entry deleted from font path.
[ 2493.452] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2493.452] Entry deleted from font path.
[ 2493.452] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2493.452] Entry deleted from font path.
[ 2493.452] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2493.452] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2493.452] Entry deleted from font path.
[ 2493.452] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2493.452] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 2493.452] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2493.452] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2493.452] (II) Loader magic: 0x7c8b00
[ 2493.452] (II) Module ABI versions:
[ 2493.452] X.Org ANSI C Emulation: 0.4
[ 2493.452] X.Org Video Driver: 12.0
[ 2493.452] X.Org XInput driver : 16.0
[ 2493.452] X.Org Server Extension : 6.0
[ 2493.454] (--) PCI:*(0:0:2:0) 8086:0116:103c:3389 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00006000/64
[ 2493.454] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2493.454] (II) LoadModule: "extmod"
[ 2493.454] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2493.454] (II) Module extmod: vendor="X.Org Foundation"
[ 2493.454] compiled for 1.12.3, module version = 1.0.0
[ 2493.454] Module class: X.Org Server Extension
[ 2493.454] ABI class: X.Org Server Extension, version 6.0
[ 2493.454] (II) Loading extension MIT-SCREEN-SAVER
[ 2493.454] (II) Loading extension XFree86-VidModeExtension
[ 2493.454] (II) Loading extension XFree86-DGA
[ 2493.454] (II) Loading extension DPMS
[ 2493.454] (II) Loading extension XVideo
[ 2493.454] (II) Loading extension XVideo-MotionCompensation
[ 2493.455] (II) Loading extension X-Resource
[ 2493.455] (II) LoadModule: "dbe"
[ 2493.455] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2493.455] (II) Module dbe: vendor="X.Org Foundation"
[ 2493.455] compiled for 1.12.3, module version = 1.0.0
[ 2493.455] Module class: X.Org Server Extension
[ 2493.455] ABI class: X.Org Server Extension, version 6.0
[ 2493.455] (II) Loading extension DOUBLE-BUFFER
[ 2493.455] (II) LoadModule: "glx"
[ 2493.455] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2493.455] (II) Module glx: vendor="X.Org Foundation"
[ 2493.455] compiled for 1.12.3, module version = 1.0.0
[ 2493.455] ABI class: X.Org Server Extension, version 6.0
[ 2493.455] (==) AIGLX enabled
[ 2493.455] (II) Loading extension GLX
[ 2493.455] (II) LoadModule: "record"
[ 2493.456] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2493.456] (II) Module record: vendor="X.Org Foundation"
[ 2493.456] compiled for 1.12.3, module version = 1.13.0
[ 2493.456] Module class: X.Org Server Extension
[ 2493.456] ABI class: X.Org Server Extension, version 6.0
[ 2493.456] (II) Loading extension RECORD
[ 2493.456] (II) LoadModule: "dri"
[ 2493.456] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2493.456] (II) Module dri: vendor="X.Org Foundation"
[ 2493.456] compiled for 1.12.3, module version = 1.0.0
[ 2493.456] ABI class: X.Org Server Extension, version 6.0
[ 2493.456] (II) Loading extension XFree86-DRI
[ 2493.456] (II) LoadModule: "dri2"
[ 2493.456] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2493.456] (II) Module dri2: vendor="X.Org Foundation"
[ 2493.456] compiled for 1.12.3, module version = 1.2.0
[ 2493.456] ABI class: X.Org Server Extension, version 6.0
[ 2493.456] (II) Loading extension DRI2
[ 2493.456] (II) LoadModule: "intel"
[ 2493.456] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2493.456] (II) Module intel: vendor="X.Org Foundation"
[ 2493.456] compiled for 1.12.3, module version = 2.20.1
[ 2493.456] Module class: X.Org Video Driver
[ 2493.456] ABI class: X.Org Video Driver, version 12.0
[ 2493.456] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 2493.457] (++) using VT number 8
[ 2493.463] drmOpenDevice: node name is /dev/dri/card0
[ 2493.463] drmOpenDevice: open result is 8, (OK)
[ 2493.463] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 2493.463] drmOpenDevice: node name is /dev/dri/card0
[ 2493.463] drmOpenDevice: open result is 8, (OK)
[ 2493.463] drmOpenByBusid: drmOpenMinor returns 8
[ 2493.463] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 2493.463] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2493.463] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2493.463] (==) intel(0): RGB weight 888
[ 2493.463] (==) intel(0): Default visual is TrueColor
[ 2493.463] (**) intel(0): Option "AccelMethod" "sna"
[ 2493.463] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 2493.463] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[ 2493.464] (**) intel(0): Framebuffer tiled
[ 2493.464] (**) intel(0): Pixmaps tiled
[ 2493.464] (**) intel(0): 3D buffers tiled
[ 2493.464] (**) intel(0): Throttling enabled
[ 2493.464] (**) intel(0): Delayed flush enabled
[ 2493.464] (**) intel(0): "Tear free" disabled
[ 2493.464] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 2493.464] (II) intel(0): Output LVDS1 has no monitor section
[ 2493.465] (II) intel(0): found backlight control interface intel_backlight (type 'raw')
[ 2493.465] (II) intel(0): Output VGA1 has no monitor section
[ 2493.466] (II) intel(0): Output HDMI1 has no monitor section
[ 2493.506] (II) intel(0): Output DP1 has no monitor section
[ 2493.506] (II) intel(0): EDID for output LVDS1
[ 2493.506] (II) intel(0): Manufacturer: AUO Model: 139e Serial#: 0
[ 2493.506] (II) intel(0): Year: 2009 Week: 1
[ 2493.506] (II) intel(0): EDID Version: 1.3
[ 2493.506] (II) intel(0): Digital Display Input
[ 2493.506] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 2493.506] (II) intel(0): Gamma: 2.20
[ 2493.506] (II) intel(0): No DPMS capabilities specified
[ 2493.506] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2493.506] (II) intel(0): First detailed timing is preferred mode
[ 2493.506] (II) intel(0): redX: 0.620 redY: 0.340 greenX: 0.325 greenY: 0.570
[ 2493.506] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 2493.506] (II) intel(0): Manufacturer's mask: 0
[ 2493.506] (II) intel(0): Supported detailed timing:
[ 2493.506] (II) intel(0): clock: 107.8 MHz Image Size: 382 x 214 mm
[ 2493.506] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1966 h_border: 0
[ 2493.506] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 912 v_border: 0
[ 2493.506] (II) intel(0): Unknown vendor-specific block f
[ 2493.506] (II) intel(0): AUO
[ 2493.506] (II) intel(0): B173RW01 V3
[ 2493.506] (II) intel(0): EDID (in hex):
[ 2493.506] (II) intel(0): 00ffffffffffff0006af9e1300000000
[ 2493.506] (II) intel(0): 01130103802615780ac4959e57539226
[ 2493.506] (II) intel(0): 0f505400000001010101010101010101
[ 2493.506] (II) intel(0): 0101010101011c2a406e61840c303020
[ 2493.506] (II) intel(0): 36007ed6100000180000000f00000000
[ 2493.506] (II) intel(0): 00000000000000000020000000fe0041
[ 2493.506] (II) intel(0): 554f0a202020202020202020000000fe
[ 2493.506] (II) intel(0): 004231373352573031205633200a0024
[ 2493.506] (II) intel(0): EDID vendor "AUO", prod id 5022
[ 2493.506] (II) intel(0): Printing DDC gathered Modelines:
[ 2493.506] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
[ 2493.507] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 2493.507] (II) intel(0): Printing probed modes for output LVDS1
[ 2493.507] (II) intel(0): Modeline "1600x900"x60.1 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
[ 2493.507] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2493.507] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2493.507] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2493.507] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2493.507] (II) intel(0): EDID for output VGA1
[ 2493.507] (II) intel(0): EDID for output HDMI1
[ 2493.549] (II) intel(0): EDID for output DP1
[ 2493.550] (II) intel(0): Output LVDS1 connected
[ 2493.550] (II) intel(0): Output VGA1 disconnected
[ 2493.550] (II) intel(0): Output HDMI1 disconnected
[ 2493.550] (II) intel(0): Output DP1 disconnected
[ 2493.550] (II) intel(0): Using exact sizes for initial modes
[ 2493.550] (II) intel(0): Output LVDS1 using initial mode 1600x900
[ 2493.550] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2493.550] (**) intel(0): Display dimensions: (380, 210) mm
[ 2493.550] (**) intel(0): DPI set to (106, 108)
[ 2493.550] (II) Loading sub module "dri2"
[ 2493.550] (II) LoadModule: "dri2"
[ 2493.550] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2493.550] (II) Module dri2: vendor="X.Org Foundation"
[ 2493.550] compiled for 1.12.3, module version = 1.2.0
[ 2493.550] ABI class: X.Org Server Extension, version 6.0
[ 2493.550] (==) Depth 24 pixmap format is 32 bpp
[ 2493.551] (II) intel(0): SNA initialized with SandyBridge backend
[ 2493.551] (==) intel(0): Backing store disabled
[ 2493.551] (==) intel(0): Silken mouse enabled
[ 2493.551] (II) intel(0): HW Cursor enabled
[ 2493.551] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2493.551] (==) intel(0): DPMS enabled
[ 2493.551] (II) intel(0): [DRI2] Setup complete
[ 2493.551] (II) intel(0): [DRI2] DRI driver: i965
[ 2493.552] (II) intel(0): direct rendering: DRI2 Enabled
[ 2493.552] (==) intel(0): hotplug detection: "enabled"
[ 2493.552] (--) RandR disabled
[ 2493.552] (II) Initializing built-in extension Generic Event Extension
[ 2493.552] (II) Initializing built-in extension SHAPE
[ 2493.552] (II) Initializing built-in extension MIT-SHM
[ 2493.552] (II) Initializing built-in extension XInputExtension
[ 2493.552] (II) Initializing built-in extension XTEST
[ 2493.552] (II) Initializing built-in extension BIG-REQUESTS
[ 2493.552] (II) Initializing built-in extension SYNC
[ 2493.552] (II) Initializing built-in extension XKEYBOARD
[ 2493.552] (II) Initializing built-in extension XC-MISC
[ 2493.552] (II) Initializing built-in extension SECURITY
[ 2493.552] (II) Initializing built-in extension XINERAMA
[ 2493.552] (II) Initializing built-in extension XFIXES
[ 2493.552] (II) Initializing built-in extension RENDER
[ 2493.552] (II) Initializing built-in extension RANDR
[ 2493.552] (II) Initializing built-in extension COMPOSITE
[ 2493.552] (II) Initializing built-in extension DAMAGE
[ 2493.560] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2493.560] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2493.560] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2493.560] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2493.560] (II) AIGLX: Loaded and initialized i965
[ 2493.560] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2493.561] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 2493.620] (II) intel(0): Setting screen physical size to 423 x 238
[ 2493.658] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2493.658] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2493.658] (II) LoadModule: "evdev"
[ 2493.658] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2493.659] (II) Module evdev: vendor="X.Org Foundation"
[ 2493.659] compiled for 1.12.3, module version = 2.7.1
[ 2493.659] Module class: X.Org XInput Driver
[ 2493.659] ABI class: X.Org XInput driver, version 16.0
[ 2493.659] (II) Using input driver 'evdev' for 'Power Button'
[ 2493.659] (**) Power Button: always reports core events
[ 2493.659] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 2493.659] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2493.659] (--) evdev: Power Button: Found keys
[ 2493.659] (II) evdev: Power Button: Configuring as keyboard
[ 2493.659] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 2493.659] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2493.659] (**) Option "xkb_rules" "evdev"
[ 2493.659] (**) Option "xkb_model" "evdev"
[ 2493.659] (**) Option "xkb_layout" "us"
[ 2493.684] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 2493.684] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2493.684] (II) Using input driver 'evdev' for 'Video Bus'
[ 2493.684] (**) Video Bus: always reports core events
[ 2493.684] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 2493.684] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2493.684] (--) evdev: Video Bus: Found keys
[ 2493.684] (II) evdev: Video Bus: Configuring as keyboard
[ 2493.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[ 2493.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 2493.685] (**) Option "xkb_rules" "evdev"
[ 2493.685] (**) Option "xkb_model" "evdev"
[ 2493.685] (**) Option "xkb_layout" "us"
[ 2493.686] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 2493.686] (II) No input driver specified, ignoring this device.
[ 2493.686] (II) This device may have been added with another device file.
[ 2493.686] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 2493.686] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2493.686] (II) Using input driver 'evdev' for 'Video Bus'
[ 2493.686] (**) Video Bus: always reports core events
[ 2493.686] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 2493.686] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2493.686] (--) evdev: Video Bus: Found keys
[ 2493.686] (II) evdev: Video Bus: Configuring as keyboard
[ 2493.686] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input4/event4"
[ 2493.686] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 2493.686] (**) Option "xkb_rules" "evdev"
[ 2493.686] (**) Option "xkb_model" "evdev"
[ 2493.686] (**) Option "xkb_layout" "us"
[ 2493.686] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2493.686] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2493.687] (II) Using input driver 'evdev' for 'Power Button'
[ 2493.687] (**) Power Button: always reports core events
[ 2493.687] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2493.687] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2493.687] (--) evdev: Power Button: Found keys
[ 2493.687] (II) evdev: Power Button: Configuring as keyboard
[ 2493.687] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 2493.687] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 2493.687] (**) Option "xkb_rules" "evdev"
[ 2493.687] (**) Option "xkb_model" "evdev"
[ 2493.687] (**) Option "xkb_layout" "us"
[ 2493.687] (II) config/udev: Adding input device HP TrueVision HD (/dev/input/event8)
[ 2493.687] (**) HP TrueVision HD: Applying InputClass "evdev keyboard catchall"
[ 2493.687] (II) Using input driver 'evdev' for 'HP TrueVision HD'
[ 2493.687] (**) HP TrueVision HD: always reports core events
[ 2493.687] (**) evdev: HP TrueVision HD: Device: "/dev/input/event8"
[ 2493.687] (--) evdev: HP TrueVision HD: Vendor 0x5986 Product 0x2ac
[ 2493.687] (--) evdev: HP TrueVision HD: Found keys
[ 2493.687] (II) evdev: HP TrueVision HD: Configuring as keyboard
[ 2493.687] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input8/event8"
[ 2493.687] (II) XINPUT: Adding extended input device "HP TrueVision HD" (type: KEYBOARD, id 10)
[ 2493.687] (**) Option "xkb_rules" "evdev"
[ 2493.687] (**) Option "xkb_model" "evdev"
[ 2493.687] (**) Option "xkb_layout" "us"
[ 2493.687] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 2493.687] (II) No input driver specified, ignoring this device.
[ 2493.687] (II) This device may have been added with another device file.
[ 2493.687] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 2493.687] (II) No input driver specified, ignoring this device.
[ 2493.687] (II) This device may have been added with another device file.
[ 2493.687] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 2493.688] (II) No input driver specified, ignoring this device.
[ 2493.688] (II) This device may have been added with another device file.
[ 2493.688] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[ 2493.688] (II) No input driver specified, ignoring this device.
[ 2493.688] (II) This device may have been added with another device file.
[ 2493.688] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2493.688] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2493.688] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2493.688] (**) AT Translated Set 2 keyboard: always reports core events
[ 2493.688] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2493.688] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2493.688] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2493.688] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2493.688] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2493.688] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 2493.688] (**) Option "xkb_rules" "evdev"
[ 2493.688] (**) Option "xkb_model" "evdev"
[ 2493.688] (**) Option "xkb_layout" "us"
[ 2493.688] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 2493.688] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 2493.688] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 2493.688] (II) LoadModule: "synaptics"
[ 2493.688] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2493.688] (II) Module synaptics: vendor="X.Org Foundation"
[ 2493.688] compiled for 1.12.2, module version = 1.6.2
[ 2493.688] Module class: X.Org XInput Driver
[ 2493.688] ABI class: X.Org XInput driver, version 16.0
[ 2493.688] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 2493.688] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2493.688] (**) Option "Device" "/dev/input/event9"
[ 2493.689] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5756
[ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4868
[ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2493.689] (**) Option "FastTaps" "1"
[ 2493.689] (**) Option "EmulateMidButtonTime" "0"
[ 2493.689] (**) Option "TapButton1" "1"
[ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2493.689] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2493.689] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 2493.689] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 2493.690] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 2493.690] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 2493.690] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 2493.690] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2493.690] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2493.690] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2493.690] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2493.690] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2493.691] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2493.691] (II) No input driver specified, ignoring this device.
[ 2493.691] (II) This device may have been added with another device file.
[ 2493.691] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event14)
[ 2493.691] (II) No input driver specified, ignoring this device.
[ 2493.691] (II) This device may have been added with another device file.
[ 2493.692] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 2493.692] (II) No input driver specified, ignoring this device.
[ 2493.692] (II) This device may have been added with another device file.
[ 2493.692] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 2493.692] (II) No input driver specified, ignoring this device.
[ 2493.692] (II) This device may have been added with another device file.
[ 2493.693] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[ 2493.693] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 2493.693] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 2493.693] (**) HP WMI hotkeys: always reports core events
[ 2493.693] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event7"
[ 2493.693] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 2493.694] (--) evdev: HP WMI hotkeys: Found keys
[ 2493.694] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 2493.694] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 2493.694] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[ 2493.694] (**) Option "xkb_rules" "evdev"
[ 2493.694] (**) Option "xkb_model" "evdev"
[ 2493.694] (**) Option "xkb_layout" "us"
[ 2500.586] (II) intel(0): EDID vendor "AUO", prod id 5022
[ 2500.586] (II) intel(0): Printing DDC gathered Modelines:
[ 2500.587] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
[ 2502.163] (II) intel(0): EDID vendor "AUO", prod id 5022
[ 2502.163] (II) intel(0): Printing DDC gathered Modelines:
[ 2502.163] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
[ 2502.206] (II) intel(0): EDID vendor "AUO", prod id 5022
[ 2502.206] (II) intel(0): Printing DDC gathered Modelines:
[ 2502.206] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
Please inform me of any more info you would need.
This is pretty confusing, any help highly appreciated, thanks!

I have found a workaround in this bug report.
Make a script in /usr/lib/systemd/system-sleep/keyboard.sh
#!/bin/sh
case $1/$2 in
post/*)
echo -n rescan > /sys/devices/platform/i8042/serio1/drvctl
esac
Do not forget to make it executable:
chmod a+x /usr/lib/systemd/system-sleep/keyboard.sh

Update to 10.6.8 - system hang (mouse issue) after resume from sleep

I am on older
MacBook Pro3.1
Intel Core 2 Duo
2.6GHz
Run on 10.6.8 almost flawelessly. Shortly after upgrade to 10.6.8 system started to hang periodically after resuming from sleep. Symptoms are that it stops responding to mouse (be it touch pad or USB mouse). Keyboard seems to be ok but system doesn't seem to be fully functional. I am able to ssh from the other computer and 'shutdown -r now' after reboot system seem to be ok until next resume from sleep. What interesting though is that this problem newer manifests then I am using external monitor.

Found problem. It was due to magic mouse that I left on. I carry this mouse in the laptop bag but rarely use it. Last time I used it (around the same time I install the update) I left it on in the bag. It was apparently disconnecting/connecting on its own and by some reason sometimes was breaking touch pad and other usb mouse connected to laptop, as soon as I switched magic mouse off broblem was fixed

USB ports don't work after resuming from standby with Windows 8 on X230 tablet

I have just done a clean install of Windows 8 on my X230 tablet. Before installing Windows 8 I installed the most recent BIOS for this machine (version 2.50). After installing Windows 8 I installed System Update from the Lenovo Website and downloaded all the recommended drivers and other files. I've also installed all the latest Windows 8 updates.
Here are the symptoms of my problem: After resuming from standby/sleep mode, my USB ports do not work. My computer has two USB 3.0 ports and one USB 2.0 ports. All exhibit the same behavior. After resuming from standby mode I have tried inserting both my mouse and a USB thumbdrive, but neither are recognized. After restarting Windows, the USB ports work again... until I resume from standby mode again.
I hope there is a solution to this issue. It is very frustrating.

Thanks for the suggestion about tweaking the "Allow this computer to turn off this device" feature. I un-checked that box for every entry I could find under "Universal Serial Bus Controllers" in the Devide Manager. Unfortunately, the same symptoms of my problem persisted.
I went back and looked at the README file associated with the BIOS 2.50 download on Lenvo's support site. At the bottom of the file it gives a "Summary of Changes". Under version 2.03 of the BIOS (the version just before version 2.50), it says:
- (Fix) Fixed an issue where USB device might not detected when system resume from sleep mode.
This indicates that Lenovo support was already aware of such issues. The problem was intended to be fixed in version 2.03 of the BIOS. However, the issue persists on my machine, even with the latest BIOS.
Hopefully someone from Lenovo can comment here.

Touchpad permanently not working after resuming from suspend

I lost touchpad and trackpoint functionality after resuming from suspend on my ThinkPad E530 (3259CTO).
Even after a complete power off (with the battery removed), the touchpad is detected but doesn't send any event, and the trackpoint is not detected.
In Windows, in the UltraNav control panel, the touchpad is marked as enabled and cannot be disabled, the trackpoint is grayed.
In Linux, I can see the difference is kernel traces when the driver is loaded.
Before : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
Now : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x0/0x0
After looking at https://gerrit.chromium.org/gerrit/#/c/31105/ and Synaptics public documentation, I was able to get more information : the device status register (F01_RMI_Data0) is 0x45, which means the touchpad is in flash programming mode since there is a firmware CRC failure.
It looks like http://code.google.com/p/chromium-os/issues/detail?id=24298, so it's probably not a Lenovo specific problem, but a bug in Synaptics firmware.
Can Lenovo provide the firmware to flash like http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X220-Touchpad-jumpy-response-when-used-with-90... which would hopefully make my touchpad working again ?
The original firmware should work, but an updated one would be better, if it avoids losing the touchpad again later.

I don't know why, but this made me think of the episode of the simpsons when home tries to get over 300 pounds so he can work from home. When he tries to dial the phone he hist all the buttons and gets a recording that says "We're sorry, you're fingers are too fat. To obtain a special dialing wand, please mash the keypad now."
BTW, sorry I can't help... but at least I am entertained easily.

Problems after resuming from hibernation

I’ve been getting horizontal lines and sound distortion after resuming from hibernation. Has anyone had similar problems or found a solution for this yet? I’m on Lion OS X 10.7.3.

Rorschach wrote:What freezes? Just X or the whole kernel? Can you ssh to your machine?
Now it doesn't freeze anymore. I really don't know what the heck is going on on my machine.
Next time that the machine freezes I'll try to ssh to it. Thank you for pointing this out.
Last edited by ArchArael (2010-03-26 15:56:17)

No sound in Flash after resuming from suspend

After I resume from a suspend or sleep there is no sound in Flash and there is no networking.
The only way is to restart my browser to reestablish the sound.
Is there a solution for this problem?
Thanks.

This does not happen with Firefox in Ubuntu, as an example. So something must be wrong somewhere.
I can confirm this happens to me in Arch with Firefox 4.0b7 and Chromium 7.0.517.44. I noticed that after resuming from suspend, not only sound (in Flash) is missing, but Flash is behaving weirdly (YouTube video plays much faster) and CPU usage goes crazy without doing any particular action.
Last edited by Niavlys (2010-12-05 23:34:30)

My Mountain Lion mac crashes after resuming from sleep

Hello
My Mountain Lion mac crashes after resuming from sleep every time I use it
It happens every time the mac resumes from sleep and it started like a week ago
I remember installing the new updates for flash? and xquartz and nothing else.
I have also had microsoft word installed on my mac for about 1 weeks before this problem started so might be related to that
Please share with me any tips on how to fix this because I am really annoyed of losing stuff after each time my mac resumes from sleep

I have an iMac bought may -11, and it worked fine with Snow Leopard.
About a week ago I bought and installed Mountain Lion 10.8.2. Everything went fine, and all software worked ok. iPhoto had some problems, but after installing update the system prompted to do, it has worked ok.
The propblem occurs now and then, when computer is waked up from sleep. The Desktop occurs, but no software starts, not even System Tools untlil rebooting the computer. Of course, I can not reboot the computer from "Apple menu", but holding the power button down.
This is very embarassing! OsX Mountain Lion has turned out to be a very big disappointment. I installed id because of iCloud (i have a new iPad, too with iOs 6 installed).
Can anyone help me? Is there any other way to solve the problem than re-installing good old Snow Leopard?
I would not like to do that, I bought Mac because I was bored in re-installing and recovering!
Thank you

Windows 8 won't find any airport after resuming from standby

Hi,
I have had a windows 7 PC with both airport express (2nd and 3rd generation) working flawlessly. I bought a new Windows 8 Laptop. Initially everything worked fine, but after resuming from standby mode (closed the display and reopened) my itunes stopped working, and the airport utility software was unable to find both airport express. After shutdown and restart they both worked again until the next standby mode.
I've read somewhere that it might be a conflict with IPv6 so I disabled it from registry, but the problem remains.....
any thoughts
Regards,
German

Did you upgrade the drivers from the wireless card manufacturer in win8 machine.. ??
If that doesn't work.. do some more basic wireless investigation..
1. Are wireless names SMB compliant.. ie short, no spaces and pure alphanumeric?
2. WPA2 Personal security with a password which also conforms to the above.
3. Test with fixed wireless channels. 11, 6, 1
4. If none of the above work.. turn off security for a few minutes and see if that works.

Explorer.exe consuming 100% CPU after resuming from hibernation

Hello,
For the last months, I repeatedly have the problem that sometimes (every 2nd or 3rd time) after resuming from hibernation, in a few cases also after disconnecting from the Internet, one or more instances of explorer.exe are consuming 100% CPU, but never
the shell instance.
I tried figuring out what it was doing, but I was unsuccessful so far.
Here is a stack of the thread which consumed most of the CPU:
0, ntoskrnl.exe!KiDeliverApc+0x166
1, ntoskrnl.exe!KiSwapThread+0x31f
2, ntoskrnl.exe!KiCommitThreadWait+0x129
3, ntoskrnl.exe!ExpWaitForResource+0x29f
4, ntoskrnl.exe!ExEnterPriorityRegionAndAcquireResourceExclusive+0x1ad
5, win32k.sys!EnterCritAvoidingDitHitTestHazard+0x13
6, win32k.sys!NtUserMessageCall+0x28
7, ntoskrnl.exe!KiSystemServiceCopyEnd+0x13
8, user32.dll!NtUserMessageCall+0xa
9, user32.dll!SendMessageWorker+0x168
10, user32.dll!SendMessageW+0xfb
11, ExplorerFrame.dll!CNscTree::_TreeInvalidateItemInfo+0xd0
12, ExplorerFrame.dll!CNscTree::_EnumBackgroundDone+0xb4a14
13, ExplorerFrame.dll!CNscTree::OnQIUpdateEnumDone+0x93
14, ExplorerFrame.dll!CNscEnumQueueItem::Dispatch+0xcf
15, ExplorerFrame.dll!CTaskLock::DispatchQueueItem+0xc5
16, ExplorerFrame.dll!CNscTree::_SubClassTreeWndProc+0x118
17, ExplorerFrame.dll!CNscTree::s_SubClassTreeWndProc+0x5f
18, comctl32.dll!CallNextSubclassProc+0xe0
19, comctl32.dll!MasterSubclassProc+0xa2
20, user32.dll!UserCallWinProcCheckWow+0x149
21, user32.dll!DispatchMessageWorker+0x1a7
22, AppVEntSubsystems64.dll!VirtualizeCurrentThread+0x1e492
23, ExplorerFrame.dll!CExplorerFrame::FrameMessagePump+0xe3
24, ExplorerFrame.dll!BrowserThreadProc+0x5e
25, ExplorerFrame.dll!BrowserNewThreadProc+0x3a
26, ExplorerFrame.dll!CExplorerTask::InternalResumeRT+0x12
27, ExplorerFrame.dll!CRunnableTask::Run+0x114
28, shell32.dll!CShellTaskThread::ThreadProc+0x2a3
29, shell32.dll!CShellTaskThread::s_ThreadProc+0x2f
30, SHCore.dll!StrRetToBSTR+0x19f
31, kernel32.dll!BaseThreadInitThunk+0x22
32, ntdll.dll!RtlUserThreadStart+0x34
I was hoping I could identify a rogue shell extension or something similar, but I didn't find any such evidence so far.
In case you need this information, this is a list of my shell extensions/copy hooks/context menu handlers/drag&drop handlers (without duplicates):
+ " SkyDrivePro1 (ErrorConflict)" "Microsoft OneDrive for Business Extensions" "Microsoft Corporation" "c:\program files\microsoft office 15\root\vfs\programfilesx64\microsoft office\office15\grooveex.dll" "12.11.2014 01:13"
+ "{C52AF81D-F7A0-4AAB-8E87-F80A60CCD396}" "" "Apache Software Foundation" "c:\program files (x86)\openoffice 4\program\shlxthdl\shlxthdl.dll" "20.09.2013 12:50"
+ "{C52AF81D-F7A0-4AAB-8E87-F80A60CCD396}" "" "Apache Software Foundation" "c:\program files (x86)\openoffice 4\program\shlxthdl\shlxthdl_x64.dll" "20.09.2013 12:41"
+ "7-Zip" "7-Zip Shell Extension" "Igor Pavlov" "c:\program files\7-zip\7-zip32.dll" "18.04.2011 19:34"
+ "7-Zip" "7-Zip Shell Extension" "Igor Pavlov" "c:\program files\7-zip\7-zip.dll" "18.04.2011 19:35"
+ "ANotepad++64" "ShellHandler for Notepad++ (64 bit)" "" "c:\program files (x86)\notepad++\nppshell_06.dll" "12.05.2014 10:49"
+ "Ath_CopyHook" "Bluetooth File Transfer Plugin" "Qualcomm®Atheros®" "c:\program files (x86)\bluetooth suite\folderviewimpl.dll" "25.09.2013 10:58"
+ "Atheros" "Atheros Bluetooth Module" "Qualcomm®Atheros®" "c:\program files (x86)\bluetooth suite\btvappext.dll" "25.09.2013 10:58"
+ "DropboxExt" "Dropbox Shell Extension" "Dropbox, Inc." "c:\users\david\appdata\roaming\dropbox\bin\dropboxext64.24.dll" "24.06.2014 01:32"
+ "DropboxExt1" "Dropbox Shell Extension" "Dropbox, Inc." "c:\users\david\appdata\roaming\dropbox\bin\dropboxext.24.dll" "24.06.2014 01:31"
+ "FTShellContext" "Atheros Bluetooth Module" "Qualcomm®Atheros®" "c:\program files (x86)\bluetooth suite\shellcontextext.dll" "25.09.2013 10:58"
+ "GDContextMenu" "Google Drive shell extension" "Google" "c:\program files (x86)\google\drive\contextmenu64.dll" "16.01.2015 01:57"
+ "GDriveBlacklistedOverlay" "Google Drive shell extension" "Google" "c:\program files (x86)\google\drive\googledrivesync64.dll" "16.01.2015 01:56"
+ "igfxcui" "igfxpph Module" "Intel Corporation" "c:\windows\system32\igfxpph.dll" "09.09.2013 18:26"
+ "LockHunterShellExt" "LockHunter Explorer Extension" "Crystal Rich Ltd" "c:\program files\lockhunter\lhshellext32.dll" "25.03.2009 08:53"
+ "LockHunterShellExt" "LockHunter Explorer Extension" "Crystal Rich Ltd" "c:\program files\lockhunter\lhshellext64.dll" "28.04.2009 10:21"
+ "PDF Shell Extension" "PDF Shell Extension" "Adobe Systems, Inc." "c:\program files (x86)\common files\adobe\acrobat\activex\pdfshell.dll" "11.05.2013 10:34"
+ "PushbulletCtx" "" "" "File not found: :/Program Files (x86)/Pushbullet/pushbullet_ctx.DLL" ""
+ "RecuvaShellExt" "Recuva shell extensions" "Piriform Ltd" "c:\program files\recuva\recuvashell64.dll" "14.03.2014 12:41"
+ "SD360" "360 Total Security" "" "c:\program files (x86)\360\total security\menuex64.dll" "12.01.2015 03:55"
+ "SourceGearDiffMergeShellExtension32" "SourceGear DiffMerge ShellExtension 32" "SourceGear LLC" "c:\program files (x86)\sourcegear\common\diffmerge\sourcegeardiffmergeshellextension32.dll" "23.10.2013 19:15"
+ "SourceGearDiffMergeShellExtension64" "SourceGear DiffMerge ShellExtension 64" "SourceGear LLC" "c:\program files\sourcegear\common\diffmerge\sourcegeardiffmergeshellextension64.dll" "23.10.2013 19:17"
+ "StartMenuExt" "Start Menu Helper Extension" "IvoSoft" "c:\windows\syswow64\startmenuhelper32.dll" "20.04.2014 18:17"
+ "StartMenuExt" "Start Menu Helper Extension" "IvoSoft" "c:\windows\system32\startmenuhelper64.dll" "20.04.2014 18:16"
+ "WinRAR32" "WinRAR shell extension" "Alexander Roshal" "c:\program files\winrar\rarext32.dll" "02.12.2014 11:07"
+ "WinRAR" "WinRAR shell extension" "Alexander Roshal" "c:\program files\winrar\rarext.dll" "02.12.2014 11:07"
+ "WinSCPCopyHook" "Drag&Drop shell extension for WinSCP (64-bit)" "Martin Prikryl" "c:\program files (x86)\winscp\dragext64.dll" "14.08.2013 12:22"
I you have any clue what might be going, I would be very happy to hear it. It's really annoying, as I have to kill explorer.exe and thereby close all my folder windows when this happens.
Thank you!
Best regards,
David Trapp

Hello,
thanks for having a look. However, I already ran SFC before posting on this forum (as part of my own investigation) and it came back clean. RescueTime (a time tracking tool) is probably not the culprit because it happened also several times in the past without
RescueTime being running (that was because I had accidentally removed it from autorun at that time).
Unfortunately, I can't follow your "invalid date" explanation. I don't think an "invalid date" is anywhere involved; in fact, the method in question is called "_TreeInvalidateItemInfo" and not "_TreeInvalidDateItemInfo"
(note that there is only one "d"), so I assume its job is just to invalidate (and in turn, refresh) the cached information about nodes in the left pane's folder tree of the explorer window(s) - since the folder tree is the only NamespaceTreeControl
(whose corresponding class name is CNscTree) in explorer folder view windows. As I see it, something is causing explorer to repeatedly refresh the folder tree data, but I am stuck at finding out what exactly.
Best regards,
David Trapp
EDIT: Disassembling ExplorerFrame!CNscTree::_TreeInvalidateItemInfo confirms that, because it seems to call TreeView_SetItem for a tree node and its parent (possibly with all fields set to *_CALLBACK), and CNscTree::_UpdateItemDisplayInfo
for the parent node.
EDIT2: I'd love to dig more into the trace, however I am hitting a wall at function names/addresses. Everywhere where I would expect a function name/address (such as the "by stack" views), I only see question marks instead. What
could be the reason?

Firefox hangs after resume from hibernation

The problem is basically exactly like described here, only the solution presented there does not actually work for me:
http://askubuntu.com/questions/59062/a-script-on-this-page-may-be-busy-or-it-may-have-stopped-responding-everytime
What happens is that every time I hibernate my laptop (with Windows 7 Pro, 64bit), when I resume from hibernation, FF is completely unresponsive (hangs) for minutes. Easily around 5 minutes. Eventually a dialog box pops up with the following:
"A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete."
And the two buttons are: "stop script" or "continue". After I click "stop script" the unresponsiveness finally goes away, and FF starts working normally again.
I think possibly even clicking "continue" also makes it go back to normal, but I'm not sure anymore since I have recently just switched to sleep mode out of frustration in order to not deal with it anymore, and I don't remember exactly if I get the same result from clicking either option.
This is extremely frustrating.
Someone else reported an extremely similar symptom here:
https://support.mozilla.org/en-US/questions/935110?esab=a&as=aaq
It might even be the exact same symptom. Maybe that person simply never waited long enough for the dialog box to appear, but otherwise the unusability symptoms are the same.

Ok so I finally got around to testing this thoroughly, as you suggested. I used FF in SafeMode for about 2 days now, and went through at least half a dozen hibernation/resume cycles. Probably closer to 10. I can conclude that using safe mode (aka restarting with all add-ons disabled) did not solve it at all. The issue remains.
As always, simply resetting FF (either with enabled or disabled addons) seems to make this problem less severe, if not almost go away completely. But after a few hibernate/resume cycles, it becomes really bad. Before posting this, I was using Opera for like 10 minutes after resuming from hibernation before FF finally snapped out of it, and windows that I had clicked on in the task bar, like 10 minutes ago, finally popped up.
I have not yet tested the disabling hardware acceleration. Sounds quite doubtful that it might help but I'll try.
How can we get the developers' attention on this?
33 others report having this problem (as of this post). And there are similar reports elsewhere. But after many new versions of FF, it seems that the developers are not addressing these bugs but are instead focused on new features to compete with whatever Chrome rolls out.
Thanks!

Slow LAN Networking Speeds after Resuming from Sleep

I use my mac mini as a HTPC running Plex. I have it connected to my Windows media server with 802.11n. Works fine but sometimes after resuming from sleep the network speed drops off to an unacceptable level (from 72 Mb/sec to 5 Mb/sec). Disconnecting and reconnecting doesn't help. Switching to G doesn't help. Only restarting the mini restores the connection to full speed.
None of my Windows clients on the same network have any troubles.
Thoughts?

Looks like Plex might be causing the problem. I always have plex running and it appears as though if Plex makes a request for a file on the share before OS X is done re-mounting it after sleep, it kills the whole process.
Shouldn't the OS be robust enough to handle a situation like this?

Teamviewer doesn't start after resume from hibernation

Teamviewer doesn't start after resume from hibernation, what can I do to make it work?
I issued command "teamviewer --daemon start" but no success.

Quote from: BOSSKILLER on 07-July-08, 00:03:29
That's probably BIOS bug, have a ask MSI here: http://ocss.msi.com.tw/ They can send you a new BIOS to try.
I supposed that this issue is caused by BIOS bug, and this speculation was confirmed. MSI Support has sent to me link with BIOS version 132, which solves the problem
Under this link you can find this BIOS: http://rapidshare.com/files/127845890/a7395ims.132.zip.html
Regards.

[TRASH]ASUS N61JQ - No Backlight after resume from pm-suspend

Similar Messages

Maybe you are looking for