Travel description Issue

Hi Experts
Am facing an issue for few exp types ;when i am trying to create trip details in PR05 , after selecting the expense type i used to enter the Mandatory Description details...(i.e Additional info pop up) i could not see description pop up window now ? please advice..
Shan
Edited by: »» ShäN* ♫ on May 17, 2011 7:05 PM

Hi Shan,
Check V_T706B1_B. Give Trip Provision Variant. Double Click on required Expense Type and Make sure the description field is made as Required.
Hope this would solve your problem.
Thanks,
Praisty

Similar Messages

GR55 Description issue

Hello Gurus,
I am trying to execute GR55 with a group of profit centers.
In report output some times i am not getting description of profitcenter and with same user id and password and on same machine i am getting with proper description. This issue is occuring once in a while.
Any idea how to rectify this issue?
Thanks,
Hari

Check the below
Go to GRR2
Select your Report
Menubar -> Formatting - Report Layout -> Lead Column
Select "Description"
Lead column - Width - 50
Now try to execute
GR55 - Execute - Double click on your report
Tahnks

SCSM 2012 - creating incident fro email - description issue

Hello, I have SCSM 2012 RTM and I am trying to use out-of-the-box create incident from e-mail functionality.
It is working but I have issue with description field of created incident- it comes with the last part of the eml file.
Description field of Incident looks like :
-_000_47499D6C4A5DAE4EB0FF86A4F6184D7EFB0023D9ex2010mbx1podra_
Content-Dis; filename="winmail.dat"
Content-Transfer-Encoding: base64 .....
I can not use Exchange Connector because I can not install SP1 for SCSM 2012 - Service Manager databases are on SQL 2008 - which is not supported for SP1 for SCSM 2012.
Any help is welcome.
Best regards,
Dubravko

Thanks for your reply, but my Service manager databases are on consolidated SQL 2008 SP2 cluster.
SQL 2008 SP2 is not supported for SCSM 2012 R2. Because on that SQL 2008 SP2 cluster are also other bussiness databases which has some compatibility issues I can not do the upgrade to SQL 2008 R2.
Best regards,
Dubravko

SCSM 2012 - creating incident from email - description issue

Hello, I have SCSM 2012 RTM and I am trying to use out-of-the-box create incident from e-mail functionality.
It is working but I have issue with description field of created incident- it comes with the last part of the eml file.
Description field of Incident looks like :
-_000_47499D6C4A5DAE4EB0FF86A4F6184D7EFB0023D9ex2010mbx1podra_
Content-Dis; filename="winmail.dat"
Content-Transfer-Encoding: base64 .....
I can not use Exchange Connector because I can not install SP1 for SCSM 2012 - Service Manager databases are on SQL 2008 - which is not supported for SP1 for SCSM 2012.
Any help is welcome.
Best regards,
Dubravko

Thanks for your reply, but my Service manager databases are on consolidated SQL 2008 SP2 cluster.
SQL 2008 SP2 is not supported for SCSM 2012 R2. Because on that SQL 2008 SP2 cluster are also other bussiness databases which has some compatibility issues I can not do the upgrade to SQL 2008 R2.
Best regards,
Dubravko

Write-Eventlog -EventID 7036 Description Issue

Hi
I am attempting to write a service stop event to the system event log. An example of the command s I have been using is:
write-eventlog -logname system -source "Service Control Manager" -entrytype information -eventid 7036 -message "The server service has entered the stop state."
The event populates into the Correct log with the correct details with one exception, the description. The description on the general tab within the system log on Event Viewer displays:
The description for Event ID 7036 from source Service Control Manager cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the
local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The Server service entered the stopped state.
the message resource is present but the message is not found in the string/message table
As opposed to the description when a manual stop of the Server Service is performed:
The Server service entered the running state.
I need the description to appear like it does when the manual stop is performed. Can someone tell me how (if) I can achieve this?
Thanks in advance.

This issue is described here: http://marcoshaw.blogspot.com/2010/10/using-write-eventlog.html
Mike Crowley | MVP
My Blog --
Planet Technologies

Description issue: Role Import in CUP from ERM

Hi All
While importing roles from ERM in CUP, the description column shows some numeric values in some strange sequence (like 0,1,10,100,1000,1001,1002,1003, and so on). In ERM, roles were uploaded from backend using Mass role Import and Role description are properly available there. For the roles created in ERM itself, correct description is available, when imported in CUP.
Not able to understand this....Please suggest
Thanks
Abhijeet

Hi Abhijeet,
I have found out the cause of this issue.
This issue is coming for those roles which doesn't have detailed description in ERM.
In ERM you can see role name, Role description and also role detailed description.
If the role's detailed description is null in ERM then after importing that role into CUP the description of that particular role will become four digit numeric character. So, We can't say it is a bug because the program is witten like this.
You can see this detailed description in role in the backend ECC system using pfcg.
I hope you understand the point what I wanted to say.
Thanks,
Sudip

Email attachment description issue

Hi Gurus,
Our issue is not really BI but we're not sure which other forum to post it under:
We're broadcasting to burst PDF reports to an internal web portal (not BI Portal). The portal has Sharepoint as backend, which is having problems parsing the attachment file because SAP's email service is appending a description tag to the email. This tag has the name of the file without the .pdf. Sharepoint reads this tag and thinks the file has no extension.
This description field can be seen in SAP Business Workplace (SBWP) /New Message/Create Attachment../Attachments tab. Does anyone know how to modify this field so it includes the file extension, or remove this field altogether when the email is sent?
Thanks in advance!

HI,
From the Safari Menu Bar click Safari/Preferences then select the Security tab. Click: Show Cookies
Delete all AT&T cookies. Relaunch Safari. Try sending an e-mail w/attachment. If you still have problems, go to the Safari Menu Bar, click Safari/Reset Safari. Select the first 7 buttons, click Reset.
Now try again. If you still can't send an attachment, Go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop.
Relaunch Safari and see if that makes a difference. If not, move the .plist file back to the Preferences folder. If Safari functions as it should, move that .plist file to the Trash.
And repair disk permissions...
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Document Description Issue.

Hi All,
When I create a document in CV01n and mention some description for that document, the description of the document is stored only in the log in language.
e.g. I logged in with EN, then the description of the document will only be stored in EN language.
If I see the same document in DE language, the description will be blank.
is there any standard way in which we can copy the the description in English to other languages.
Thanks and Regards.
Piyush R Sakharkar.

Hi,
Espen is right. The document description is normally stored in combination with the logon language. The only alternative would be to go to tab "Descriptions" and here you can add different descriptions for different languages.
Otherwise the BADI method mentioned by Espen could help to add further entries in table DRAT.
Best regards,
Christoph

Lotus Notes Traveler sync issues and problems

No device
Hello
I could connect my Palm Pre2 to our company's Lotus Notes Traveler successfully.
It is not as straight as on iPhone as my colleagues, the only point is to indicate completely the path to the Microsoft Exchange link, like:
https://mycompany.mylotusname.com/servlet/traveler/Microsoft-Server-ActiveSync
Then using my lotusnotesID and the Internet Password made it working REAL FINE.
I could get my mailbox, agenda and contacts exchanged with the pre2, terrific!!!
Some limitations though:
1) Tasks and notes are unfortunately NOT WORKING at all.
2) the calendar does not synchronize more than two weeks in the past, but it seems that in the Pre2, it is a limitation for any Microsoft Exchange server. I have another MS Exchange account, not the lotus one, and the limitation is the same, in the past NOT OLDER than TWO WEEKS!!
(When i think that my Palm TX, Tungsten2, Palm W, etc, did synchronize 10 years of agenda, this is really sad that a new high tech device cannot make it!! I need to know what i have been doing last year or the year before in my professional life. iPhone sync shows EVERYTHING!!)
MAJOR PROBLEM IS FOLLOWING
This worked for about three weeks, and then I started to have a weird problem.
It started on some received mails, and now it does it on every mail, all mails are shows properly in the mail list in the mail program: received from M.smith, on May 22, "Dear M.XXXX i think ..." which shows the first words of the mail.
So top display is ok.
When i open the mail, it says "Retrieving Mail Text", it loops for 30 seconds back giving an error message and asking to try again. Trying again doesnot retrieve the body of the mail either.
==> NO WAY TO READ THE MAIL COMPLETELY!!
It worked fine for the first three weeks NO PROBLEM AT ALL!!
I have tried my Lotus Traveler account on an iPod and iPhone using the same MS Exchange configuration, and there
NO PROBLEM AT ALL.
So it is in the Palm Pre sync where something goes wrong.
I reset my PALM completely, and created a brand new user from scratch, reconnected it to the Lotus Traveler account and I got the same error, so it is not a matter of database too large in the Pre2 or something else.
It is INSIDE the PalmPre synergy sync itself.
Reading my mail from other sources like Google mail, or from a POP account works like a charm.
I don't know if someone at HP Webos can do something, but this is a message in a bottle.
Jame from France

Hi,
I don't know what happened, but one of a sudden, on Monday afternoon, everything worked back ok again.
I was about to show to a friend the famous message "cannot retrieve mail's body", but then the mail's body was retrieved from God knows where and it came direct on my pre screen.
5 minutes before it didn't work, 5 minutes later it did work.
I didnot change anything to my profile or pre or my lotus account.
I just don't understand why this worked again.
The only difference I can think of, but I am not 100% sure, is that when I "transfer" a mail to someone else; the message I send is truncated generally just after the list of the mail recipients;
Sorry not to be able to say more than that, but it is weird for me too, how did it come to work?!?
Rgds
Jame

0CUSTOMER_TEXT description issue

Hi,
While loading the master data for 0CUSTOMER object could able to load data for ATTR and able to see the data at object level, but if i load the TEXT data it was coming up to PSA and could able to see data in the object text table i.e., /BI0/TCUSTOMER, but not getting updated at object level.
Not able to see the description for the CUSTOMER object.
any inputs regarding this will be appreciated.
Regards,
Prabhakar.

I have checked that one also, but data was not getting displayed/updated at object level. I couldn't able to get the description of the customer at obejct and report level.
Regards,
Prabhakar.

Overhead key description issue

Hi Team,
I copied COGM Costing sheet and i added new OH keys with "Z" description as labour, machine hour, production cost etc..
i have give credits as E00, E01, E02 etc..
While define credit description as "Cr raw material, Cr raw material, Cr raw material". while running CK11N i am getting different description as " OHS Ram Material, OHS Other Material, OHS Personnel".
I want to change the description like Labour, Machine hour, Production cost, etc..
Pls help me how can i change the description.
Regards,
Nagaraju.

Hi Nagaraju
CK11N would show the description of the Secondary cost element (Category 41) involved in the costing sheet
So, if you want some other description, you will have to do it in KA02
Regards
Ajay M

Description issue

HI Guys,
In one of report my info-object have 30 Length (Char) , source field also 30 length output populted gud in masterdata level.
But when i create a report that info-object showing 3 characters (Ex : XXX), i want complete description what my info-obj have
in the report.
Thanks
Srikanth

Hi Srikanth,
Check if the descriptions are maintained or not?
right click on the info object and check the properties Display as --> here if its standard try to change it to long text so that you wont miss the description.
Check in the Characteristics properties business explorer tab --> BEx description --it might be short description by default --> change it to long description if possible or else can follow the above steps.
Regards
KP

Lotus Traveler sync issue

Our company is syncing Lotus Notes emails, contacts via Lotus Traveler.
Time to time (ones a week) I have to switch off/on my iPhone 3GS as the push method stops to work.
I can still receive emails as soon as I open Mail app on the iPhone but company Contacts for instance are inaccessible until I restart my iPhone.
Anybody same experience? Solution?
Thanks

One detail to add: I have Lotus Traveler 8.5.1

Travel managment issues

while i try to do a reservation on tp01 i can not do it for more than one user at a time.
what is the issue here?
is it authority issues or what?
by waht i could solve this any BAPI or UserExit that could be helpfull?
Pls, urgent

thanks for your reply.
I maintained Budget profile and Tolerance limits. I am getting error only at the time of posting in PRRW.But i need to control at the time of saving the trip. I can use user exit to control. If there is any standard functionality of checking the budget at the time of saving then it should be good.
For me main problem is i am not able to get report both trip commitments and fund management details. Please inform me in which table internal order and trip commitments are storing.
Regards,
Sree

Travel Advance Issue-2

Friends,
When I post the advance, the posting in FI is;
Advance account     DR 555
Vendor account        CR 555
Now when I process expenses, the advance amount is not taken care of. The posting is done as follows;
Travel Expense account   DR 1000
Vendor account                CR 1000
However the simulation of expense report (PR05) shows the amounts correctly
Total amounts for trip in SAR                                  1,000.00
Advance in SAR                                                       555.00-
Payment Amount in SAR                                            445.00
Please help.

HI Raynard,
Thanks for the reply. Yes, if I set the position 2(Other settlement in expert view) as '1', then it works OK with the status 'Request Approved' . But if I set it to '3', it does not deduct the advance from the expense. Here are the steps I do while position 2 is set to '3'
PR05           Enter only advance andsave    Trip Completed/To Be Settled
PR05           Approve                                    Trip Approved/To Be Settled
PR05           Settle                                         Trip Approved/Settled
PRFI, PRRW   advance is posted as
Vendor account       Credited
Advance account     Debited
--- the expenses ---
PR05         Eenter expense and save           Trip Completed/To Be Settled
PR05           Approve                                    Trip Approved/To Be Settled
PR05           Settle                                         Trip Approved/Settled
PRFI, PRRW   and posting is as follows
Expense account      Debited
Advance account     No posting
Vendor account       Credited with full amount, advance not deducted.
Regards!

Travel description Issue

Similar Messages

Maybe you are looking for