Trouble hiding and showing captions with a single button
I am trying to show a caption (MSO) with the click of a button and then hide it again with the same button. I have created a MSO with two states one with the text, one without and then created an icon with a plus sign [normal] that triggers the second state that has the text. After the button is pressed it changes to a minus sign [click] the next step is where I am running into trouble. I just want the user to be able to click the minus button to hide the caption before moving on to the next page or article. I have tried every button state combination but can't hide the caption short of creating a new button somewhere else on the page, this is not desired. I have seen this function in publications like National Geographic, and Vogue so I know it is possible. It seems so simple but I can't figure it out. Being able to close the caption after showing it will add another level of interaction and professionalism to my publication...please help someone.
Being inmersed in this thing, I am gathering some instructions and notes about very basic DPS things for our working team use and my Spanish speakers readers. Here you have the first one: Cómo hacer que un pie de foto se muestre al pulsar encima de la imagen en InDesign para DPS
They are based in Bob Bringhusrt's DPS tips —thanks a lot!—, what I have read in this forum and the Adobe's help data.
There's a translate button that works quite fine.
Is that of any help? Hope so
Gustavo (Posting from heat-melting Madrid)
Similar Messages
-
My macbook won't strat and show file with question mark on it?
Hi
is there anyone can help me please my macbook can't boot and show file with "?"mark on it.Restart and hold command + R (both keys) down. The screen will show four options. Select Disk Utility. Next click on the name of your drive, and run Repair Disk.
After that is done, restart in the usual way. -
HT4623 ipad froze and shows itunes with plug while updating with iOS
ipad froze and shows itunes with plug while updating with iOS.
That message means that you have to restore the iPad using iTunes now. Something went wrong. This explains how to do it. Read it thoroughly before you start - and take note of the end of the article under Additional Information where it talks about using recovery mode. You might need to use it.
http://support.apple.com/kb/ht1414 -
Execute a VO '4' times and show the result in single table at once.
Hi,
I want to execute single a VO query multiple times with different parameters and show the results together in a Table at once
In Detail
I have a table to which is associated with a VO.
The VO contains SQL whose WhereClauseParameters need to be dynamically binded.say headerId and lineId
Select ... from ....where headerId = :1 AND lineId = :2
I have to pass these 4 values and show all the results in a single table
headerId lineid
H1 ............... L1
H1 ............... L2
H2 ............... L1
H2 ............... L2
I understand that i need to bind parameters dynamically and exceute the VO.
As i have 4 different set of parameters, the view object will be executed 4 times.
I want to show all the results together in a single table.
How can I do it.
thanks,
GowtamHi Mani,
Thanks a lot for the patience and detailed solution.I will try it out and tell you the status.
Meanwhile, I have 2 questions on this solution(just curious)
I will give you the snapshot of the table
Table - ModelInfo
Model......Tube..... Float....Size......Col5.....Col6.......Col7.......
M1............T1.......... F1. .....1..........C15......C16.....C17.....
M1............T1...........F1.......2..........C25......C26.....C27.....
M1............T2......... .F2.......1..........C35......C36.....C37.....
M1............T2...........F2.......2..........C45......C46.....C47.....
M2............T1.......... F1. .....1..........
M2.............T1..........F1.....2.........Cn5.......Cn6........Cn7
.<continues...>
.<till>
.Mn............Tn..........Fn.......n........Cxy.......Cpq.......Crs....
Question 1:
if you notice this data,
The Columns 5 to 7 are dependent on Combination of Model,Tube,Float and Size.
Hence will this query work properly(without mixing up data from other Pk combination) and will it be efficient?(I Know this is a stupid qst, still double checking..As your solution assumes that each row is unique for Model only..which is not true)
Select ...From....Where
Model in(M1,M2,..Mn) AND Tube in(T1,T2..Tn) AND Float in(F1,F2,....Fn) and Size in(1,2...n).
In short, will C15,C16 and C17 appear only with M1,T1,F1,1..I believe it will.
Question 2:
As I told,
Third party program will return Array of Objects.
Each object will have a variable called Flow along with
Model,Tube,Float and Size.
Flow is not stored in the database(can not be stored due to functional reasons).I want to show this Flow also along with other columns fetched from the DB for all 100+ rows.
How can I do it?
I will give u the scenario(with just 2 rows)...please check(Flow is not stored in DB)
Third Party object : ObjModel
Model......Tube..... Float....Size......Flow
M1............T1.......... F1. .....1..........100
M1............T1...........F2.......2...........200.
M1............T2.......... F1.......1..........300
M1............T2...........F2.......2..........400
My concern is,
After the VO executes and shows other 6 columns, it should show Flow appropriately.(associated with each object in the array)
I understand that I need to have a Transient attribute in VO called[b] Flow.But I don't know how to perform the two tasks simultaneously..
Task1:Your solution on showing table columns
Task2:Showing Transient data for each object returned from program.
thanks,
Gowtam -
I've lost reload icon and all captions with icons. Help.
I installed a Mozy update, restarted, and found that firefox had lost the captions with the icons, the reload icon altogether. The customize box covers nearly the whole page and doesn't include as much as it used to. My Autofill is gone. And there is not Navigation Bar listed int the toolbars box.
Did you just move from Firefox Beta 28.0 to Firefox Beta 29.0? What you are experiencing is the new "Australis" user interface.
On first run, Firefox 29 should present a tour orienting you to the toolbar and menu bar changes. If that didn't run, perhaps there is a way to trigger it again? (I haven't tried it myself.)
If you prefer the familiar user interface of Firefox 28.0, you can install the "release" version in place of the beta version. A backup might be a good idea, but you don't need to remove the beta.
* To download the full installer: https://www.mozilla.org/firefox/all/ (scroll down to your preferred language)
* Backup tips: [[Back up and restore information in Firefox profiles]] -
Fetch records from two different dbs and show it in a single af table
Hi,
I have a requirement, such as say, there are two databases having their own employees table. I need to query them both and show them in the UI using the af table tag. Any idea how this can be achieved efficiently please ?
regards,
VijaiHi,
Always mention your JDev version. Are you going to make the resultant data as read-only? If yes, you can create a db link pointing to another schema, and then use union all to merge the data in the query of the VO.
Ex:
select col1, col2, col3 from table1
union all
select col1, col2, col3 from table2@db_link_pointing_to_diff_schema
-Arun -
if i could show you a screen shot.... that would have cleared the situation. ads show up in left bottom corner with open/hide button in a frame. and the same ads show up in every html plugin on the webpage especially in facebook social plugins. however on google, mozilla, facebook, twitter there comes no ad like this. Its very annoying. I recently uninstalled firefox for the same reason but nightly is having the same problem. and let me tell you there is no such thing in other browsers like chrome and i.explorer. I like firefox i dont want to change it but i will have to if the problem persisted. :( please help.
hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
please also run a full scan of your system with the security software that you have in place and different other tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]] -
How to get out of tex edit mode with a single button?
Hey,
Is there a way to escape from text edit mode with a single click or button?
So far I always hit CTRL+Enter, then V and then I click away from the canvas so that the paragraph ain't higlighted no more. But thats a pain in the butt! Cant there be a single button for this?
Thaks
AOSomething interesting I just noticed: Double-clicking outside a text box can have different effects according to context.
With the Pointer tool selected, double-clicking on a text box allows you to edit the text. In this "quick edit" mode, double-clicking outside the text box will return you to the Pointer tool.
If the Text tool has been selected manually, double-clicking outside a text box will create a new text box. -
Captions and no captions with multiple slideshows (a bug in idvd 6?)
Hi,
I am having a problem with the captions option in multiple slideshows, and am wondering if this a bug within idvd 6. My project has two slideshows which I created within idvd because I wanted the manual option of forwarding through your slides on tv. I have one slideshow with captions selected and the other has captions deselected. Both slideshows preview correctly in idvd, but when I burn the dvd to a disk, I either get both slideshows with captions or both without. The only way around this was to select captions for both slideshows and then manually delete the captions out of the slideshow that I didn't want them to appear. Is this a known glitch with idvd 6?I foolishly tried this on a separate Mac on a different library, that one with 22000 images that I had not edited (since the old iPhoto would just die a slow death on that sized library).
I actually only spent the money for iPhoto 6 (iLife's remainder package did not have any compelling use for me right now) and its ability to handle 25000 images.
Well, it is faster (i.e. it does not go to sleep for 12 minutes) if I click the scroll button but the blank images problem showed up there also. And ALL of those pictures were standard jpgs and not one was from a weird camera or ever modified or otherwise tweaked if that were an excuse for iPhoto 6 misbehaving with some pictures.
VERY annoying and very strange that they would not see this in Beta testing. Assuming they do test. So, folks, if you are planning to buy iLife for iPhoto, be forewarned. I will add this to my TO BUY OR NOT TO BUY blog entries at http://imran.com/media/blog/ so people are aware.
regards
Imran -
Hiding and showing columns in JTable
Hi
When I use removeColumn on a JTable I see that
it also disapears from the tablecolumnmodel. (I thought that the jtable was the view and the data would remain in the tablecolumnmodel)
So how do I show the column again ?
//I used the following
TableColumnModel colModel = table.getColumnModel();
TableColumn tc = table.getColumn("header one");
table.removeColumn(tc);
Thanks
TimYou are misreading it (I believe). The column is removed, but the data still exists in the model. The information about the column itself is lost.
What I did, when columns are removed (I call it hiding), I remove them from the table and keep them in an arraylist. When I want to bring them back, I find it in the arraylist, add it back to the table and then move it to the correct place. -
Cfgrid hiding and showing columns dynamically
I am trying to get my grid and some checkboxes to integrate
with each other in order to show and hide different columns through
actionscript. I am using the code found at this website:
http://www.asfusion.com/blog/entry/mxna-reader-built-with-cfforms
and I have been having no luck in trying to implement it. I
would like to do away with the .as files that come along with this
code but I can't get it to work with or without it. Does anybody
know how to do this, I am at a loss and I need to get it working
soon.
Thanks in advance!
Jeff
Here's the code I have been working with:
<cfformitem type="script">
<!---
function _global.hideColumns()
_global.postColumns = [];
for(var i =0; i< contactList2.columnCount; i++)
_global.postColumns.push(posts.getColumnAt(i));
contactList2.removeColumnAt(6);
contactList2.removeColumnAt(5);
contactList2.removeColumnAt(4);
contactList2.removeColumnAt(3);
function _global.setColumn(target, col)
if(target.value)
contactList2.addColumn(_global.postColumns[col.index]);
contactList2.spaceColumnsEqually();
contactList2.getColumnAt(0).width = 0;
else
for(var i = 0; i< contactList2.columnCount; i ++)
if(contactList2.getColumnAt(i).columnName == col.data)
contactList2.removeColumnAt(i);
</cfformitem>
<cfform action="#cgi.script_name#" method="post"
name="form" preservedata="true" preloader="yes" format="flash"
height="605" width="765" skin="haloblue"
style="themeColor:##56A1E1; marginRight:0;
background-color:##7B8DA1;">
<cfgrid name="contactList2" query="GetActivity"
rowheaders="false" height="365" colheaderalign="center"
colheaderfontsize="12" colheaderbold="yes"
onchange="getUrl('act_view.cfm?ActivityID=' +
contactList2.dataProvider[contactList2.selectedIndex]['ActivityID']);">
<cfgridcolumn name="ActivityID" display="no">
<cfgridcolumn name="Title" header="Activity Title"
width="150">
<cfgridcolumn name="Details" header="Details">
<cfgridcolumn name="SiteArea" header="Site Area"
width="70">
<cfgridcolumn name="Mission" header="Mission"
width="70">
<cfgridcolumn name="Date" header="Activity Date"
mask="mm/dd/yyyy" width="95">
</cfgrid>
<cfformgroup type="horizontal" height="14">
<cfinput type="text" name="columns" visible="no"
label="Check here to show columns:" width="0">
<cfinput type="checkbox" name="chktitle" checked="true"
label="Title" onClick="_global.setColumn(chktitle, {index:1,
data:'title'})">
<cfinput type="checkbox" name="chkdetails" checked="true"
label="Details" onClick="_global.setColumn(chkdetails, {index:2,
data:'details'})">
<cfinput type="checkbox" name="chkSite" checked="false"
label="SiteArea" onClick="_global.setColumn(chkSite, {index:3,
data:'siteArea'})">
<cfinput type="checkbox" name="chkMission"
checked="false" label="Mission"
onClick="_global.setColumn(chkMission, {index:4,
data:'mission'})">
<cfinput type="checkbox" name="chkDate" checked="true"
label="Date" onClick="_global.setColumn(chkDate, {index:5,
data:'Date'})">
</cfformgroup>
</cfform>Hmm. Perhaps the problem is that when these columns are hidden or shown, the data is cleared out so there is nothing visible in any column. Still, shouldn't the width stay static according to the width I specified for each column? It seems like a bug, really, but I'm not sure why it seems uncommon.
Unfortunately an upgrade to Flex 3 isn't possible at the moment, I don't think. -
Hiding and showing Flash Player causes a reload
I have a Flex application embedded in an IFRAME that is
inside a DIV.
If I hide the DIV and then make it visible, the application
reinitializes itself. Is there a way to keep this from
happening?Instead of showing/hiding the DIV, you could try to change
its size to 1px height and 1px width.
I guess it's not a real good way to do it, but it may works
:) -
Data grid within advanced data grid (Hiding and showing columns)
Hi,
I have a dta grid within advanced datagrid. When the row of advanced data grid is expanded, the datagrid opens up.
I want to control the columns of datagrid based on the value of a field in advanced data grid. I want to show all the columns of the datagrid if the field value of advanced data grid is "X" else I want to show only few columns of the data grid.
I will set the id for all the columns of the datagrid. Then I think I can write some code in a method to set the visibility of the columns and assign the function to item opening property of the advanced data grid.
Please give me some ideas.
Regards,
MaheeHi,
Please go through following links:
http://www.cflex.net/showFileDetails.cfm?ObjectID=553
http://flexmusings.wordpress.com/2009/08/03/hide-row-column-datagrid/
http://www.java2s.com/Code/Flex/Grid/HidinganddisplayingDataGridcolumns.htm
Thanks and Regards,
Vibhuti Gosavi | [email protected] | www.infocepts.com -
Hiding and showing borders on tables nested inside other tables
I'm using this code:
<?CHOOSE:?><?WHEN:position() > 1 ?><?attribute@incontext:border-top-color;'black'?>
<?attribute@incontext:border-top-style;'solid'?>
<?attribute@incontext:border-top;'0.25pt'?>
<?end when?>
<?end choose?>
I want the top border to apply to the entire row, not just the cell. This is probably easy syntax but it isn't accepting anything i throw at it.
Edited by: CISguy on Feb 23, 2010 4:32 PM
Edited by: CISguy on Feb 24, 2010 10:49 AMI got it to work, but I think the PDF output is just buggy and code only works when it wants to. If anyone else is trying to use a table inside a table and is facing the "unexpected thick table border" issue, this is because of the table borders stacking on top of each other. I got it to work by disabling almost all borders on the inner table and using this code to show a border when i wanted it to.
<?if@row:position() >1?>
<?attribute@incontext:border-top-color;'black'?>
<?attribute@incontext:border-top-style;'solid'?>
<?attribute@incontext:border-top;'0.25pt'?>
<?end if?> -
I am trying to configure Mainstage to input my own guitar and add a backing track from the library or a loop but, I can figure out how to open or add the tracks I've downloaded. Any help would be great
did you try the PlayBack preset/template?
once you open the PlayBack plug-in you just load the tracks from the plug-in's menu.
Maybe you are looking for
-
Spry Tab Panel is not working properly on remote server
Hello All, I have a problem with spry tab panel, it is not displaying image in the background when it is active, it is working properly in local server but when i upload to remote it vanishes. Here is the link http://www.geftas.com/temaritestpage/abo
-
I want to add site setting (wheel) functionality on on master page and hide ribbon,so i added following code/HTML on my master page. This code is working when page is published /check in,but its not working(i mean popup/dropdown is not coming when cl
-
Does ASA ezVPN support reactive primary vpn server feature
hi, i am going to configure asa5505 as the azvpn client . and configre primay and secondary vpn server in the list. i find some feature that is support by ios ROUTER ezvpn, not sure it will be support on ASA ezVPN??? Question? will the ezvpn fall
-
Requery form data block is empty after updating notification attributes
Hello, we build a form to approve/reject open WF notifications. The form data block is based on wf_notifications, wf_local_user_roles, wf_notification_attributes and wf_comments and some additional PSB tables. We use the following API's to perform th
-
Want Print Priview of check box on smart forms
Hi Expert, I want Print Priview of check box on smart forms. I get the checkbox symbol when i give the print out but it not show in priview. So pls suggest how it show in print priview. Thanks & Regards SwatantraPathak