Trouble with Component output

I have had my Apple TV for about a year and have been using the HDMI connection without any trouble. I am now switching to the component cable since I need the HDMI port on the TV for my Blue Ray player.
My problem is there does not appear to be a signal coming through the component cables. My TV's component input accepts 480p/720p/1080i signals and I assume the apple TV must provide a signal that would be compatible with one of those.
I plugged the component cables into the TV and Apple TV, and then unplugged the power to reset the Apple TV, hoping it would recognize the component cables, but still no luck. My TV is a Samsung rear projection LCD if that helps.
Any advice on what might be causing the problems?

Welcome to the  Discussion Forums.
When the tv detects a display connected by HDMI it only shows you the resolutions that the display supports. However when connected by component it shows all the output resolutions, you will have to select one that suits your display.
It may be that your tv is still trying to output at the resolution it was when you had the HDMI cable plugged it and you simply get a blank screen. In which case hold down the menu and '+' buttons together for 6 seconds and cycle through the resolutions using the '+' or '-' buttons ,allow a little time at each resolution for it to establish itself.

Similar Messages

  • Imported concert from MainStage 2, trouble with stereo output.

    Hi everyone,
    I've imported a concert from mainstage 2 in the newest 3. I don't know why but I found many trouble when setting the output of the project.
    I'm using a Focusrite Saffire Pro 24 DSP and when a stereo output is set, I see in mainstage the L-R indicator bars blink. Only the Left indicator works correctly, the Right continue blink and I have no output from that connector.
    Has Anyone encountered the same issue? Can anyone help me, or could anyone drive me on the right-way to find an answer?
    If more informations are needed just ask
    Thanks to everyone.

    Ummm my apologies if I missed it, but Ive read through this thread and Im not sure if theres an answer to the original question. Ive got a similar situation, AVI out of PP3 with all sources stereo, the AVI sounds great in media player and is definitely stereo. Bring the AVI into Encore 2 and the resulting DVD is double mono using the left channel only heres the strange thing, I get the same results using Nero Vision Express. I am 100% sure the AVI is stereo, it includes clips from an old Beatles song where the old school stereo imaging put all of the vocals into the left channel and the instrumentals into the right, well, the instrumentals are gone on the DVD and Ive got nothing but vocals. Again, the AVI sounds fine, just for kicks I even burned the raw AVI to DVD and popped the disk into a set-top player and it played fine something is wrong with the transcoding and its a problem for both Encore and Nero. Any know whats up? Are we calling it a bug? Seems kind of serious if it is, the kind of bug that should keep a product from launching.

  • Trouble with Component Wizard and User Database

    Hello,
    I am a user of Circuit Design v.13.0 Power Pro Edition (Windows 8 Pro x64, intel Core i7 3GHz, 4GB memory, 500GB HDD).
    On MultiSim, I tried to create a 324-pin component via the Component WIzard, and had this component listed in the User Database.
    I failed, however, to register the symbol (ANSI Y32.2) created on the Symbol Editor, receiving an error saying something like:
    "The ANSI symbol for component ......... cannot be found or is invalid. The symbol is saved in the database. Check if the symbol is correct."
    (This is an English intepretation of the original Japanese, so may not be the exact English error message.)
    Actually, no symbol appears on the Database Manager.
    I have found that this error does not occur for pin counts equal to or fewer than 144.
    Furthermore, other 324-pin and 256-pin components created on MultiSim v.12.0 caused an error when I tried to edit these components in the User Database, with a message like:
    "A trouble occurred in reading the symbol data of component ..."
    Could anyone tell me how I can resolve these problems?
    I will greatly appreciate your help.
    Regards,
    Akira

    I have the same problem. I am using Multisim 13.0.1 (13.0.1059) with database version 13.0.c, Win7 x64
    I found that when you have a component symbol with 146 pins, it works, but when you add one more pin, you get an error saying, "The ANSI symbol for component [my component name] in family [component family name] is missing or invalid. The symbol will still be saved to the database. Check to ensure the symbol is correct.
    Multisim will not allow opening the component in the database for editing. If you try to place the component on a schematic, you get the error "There was a problem reading symbol data for component [component family name]/[my component name]

  • Trouble with nVidia output?

    I am having trouble getting my desktop to show up through the nVidia GeForce FX5200. This is the card that came with the 2g g5. Slot one - VGA- has 20 inch cinema display. Slot two - ADC -, I connected the Griffin ADC to VGA adapter that came with the computer. Connect this to Samsung HDTV. All I am getting is the default Leopard aurora desktop. Is there something I have to do to send my user stuff though so I can see whats on my desktop?

    Are you not getting the Desktop on either Monitor? What resolutions are the each set to?
    Support for digital resolutions up to 1920 by 1200 pixels
    Support for analog resolutions up to 1600 by 1200 pixels
    ADC and DVI connectors; DVI to VGA adapter included
    Dual display support for extended desktop and video mirroring modes
    Support for up to two Apple flat panel displays(8)
    http://support.apple.com/kb/sp96
    Power Mac G5: Display Compatibility
    http://support.apple.com/kb/HT2707?viewlocale=en_US

  • Trouble with Digital output on Live Value under Windows

    I have a soundblaster li've value card in my system using the digital output in win98se and all works fine. I just upgraded to WinXP. The windows drivers worked fine once i switched them to digital output. However, i lost the Creative mixer and wanted it back. I then downloaded your Unipack driver for the Li've card for winXP and lost the digital output even when i toggled to digital output control. I then downloaded the li've value from the Gateway site since they OEM'd the card in my system and the digital is working again. However, they do not provide the Creative mixer. Is there anyway I can get the Creative Mixer to work in XP wiith the li've value card? Thanks
    Soundblaster FAQ states:
    Some name brand systems shipped with a special Li've! Value card that was made to work with digital speakers. If you system shipped with a Li've! Value and you have digital speakers you will need to use drivers provided by your system manufacturer. If you use the drivers on the Creative website your card will no longer work with your digital speakers.
    Boston Acoustic Digital Speakers or Prebuilt System With a Digital Li've! Card
    If you have a set of Boston Acoustic digital speakers that came with your system and they are not working with your sound card, make sure you have it connected to the digital out on the card. Also make sure that the digital out is enabled.

    I still always get the value 0.0 returned for minA. I
    know that the data is being correctly stored because I
    have a seperate report frame that displays all values
    for all entries.
    Any ideas where the flaw is?
    Thanks!
    Hey, there. It's unlikely that your users are entering negative numbers which are the only numbers that will be less than zero. You need to initialize your minA to be some quite large number.

  • Trouble with field output conversion when activating the Adobe Forms

    Hi everybody,
    I'm facing an issue very strange.
    I made an interactive form for a customer which is based on abap dictionnary and send by e-mail to user. This form works fine and is in Production system .
    Now i made an evolution on this form and when i activate the forms in SAP , all the field conversion are lost so when i got the form Date fields appears with 00000000 if they are empty.
    To solved this issue in Development system , i delete the form and recreate it and that's have been sold .
    Now this issue appears in Quality system also after transport it...so i try to do the same way to solve it ...i create one transport order where the forms is deleted and another one to recreate it ..but the issue still alive.
    I search on OSS and don't find any notes for this .
    This issue also appears on aonther forms which is not interactive one ( purchase order printout ) .
    I work on ECC 6.0 with AdobeLifeCycle Designer ES 2
    Does anybody face this issue and solved it ?
    Regards

    Ok i will try to explain more clearly because i think there's a misunderstanding .
    When you define an interface of Adobe forms you can choose between DDIC interface or XML interface. When you chose DDIC interface when you generate the form all necessary SAP CONVERSION EXIT are use when value are given to the XML file .
    For example i got a field type datum define in my interface which is based on DDIC .
    I place this field in the layout and set the edit mask in the layout with 'YYYY/MM/DD' for example.
    Now i execute the forms and give value '00000000' to the field, normally what should appears in the result is : nothing because it's an initial value.
    But in my case the value appears as '00000000' , the edit mask in the form is not taking into account and the conversion of value inside ABAP Stakc is not done.
    When you have a look inside the function module generated by the form, you will fin a routine which name is %WORK and inside it you will see a routine which is %OUTPUT which is call for each field you want to print in the form .
    If my field is correctly output on the form the data type is givent to this routine in order to make it correct and until now everuthnigs looks good for me but my issue is that the data type of field are not given to this routine so it consider each field as simple TEXT and that wrongs.
    juste bellow the code generated for the routine %OUTPUT
    form %output using p_name      type fpfield
                       p_value     type any
                       p_datatype  type datatype_d
                       p_abap_type type c
                       p_reffield  type fpunit
                       p_unit      type any
                       p_edit_mask type convexit.
      case p_abap_type.
        when cl_abap_typedescr=>typekind_struct1 or
             cl_abap_typedescr=>typekind_struct2 or
             cl_abap_typedescr=>typekind_table.
    *     ignore
        when others.
          call function 'FPCOMP_WRITE_DATA_FIELD'
            exporting
              i_field_name   = p_name
              i_value        = p_value
              i_ddic_type    = p_datatype
              i_data_type    = p_abap_type
              i_edit_mask    = p_edit_mask
              i_ref_name     = p_reffield
              i_ref_value    = p_unit
            exceptions
              usage_error    = 1
              system_error   = 2
              internal_error = 3
              others         = 4.
          %fpcomp_error.
      endcase.
    endform.                    "%output
    is it more clear now ?
    Regards

  • Trouble with ADVC110 outputing video

    I've just bought Final Cut pro X and I can't get it to play back through a Canopus ADVC110 device that I use to convert composite video/audio to firewire and back again. It will import but not export. This works well using FC Express. Does FCPX allow to export via firewire?

    I don't think there is any chance that Apple will make output to tape possible but you can always make a request.
    In the Final Cut Pro menu select Provide Final Cut Pro Feedback and you will be able to ask them.
    The problem is that very few people now use tape cameras and as far as Apple is concerned tape is obsolete.
    Everyone is expected to output to DVD and the web.
    They are concentrating on the latest cameras that shoot on memory cards etc. and really couldn't care less about people with older equipment.
    We are lucky that FCP X still allows video on tape to be imported!

  • Trouble with component skinning...

    imported comboBox assets from haloTheme and edited the
    ComboThemeColor1 MC from the acid green to an orange to match my
    site. Then I checked the linkage and made sure it was set to Export
    in First Frame. But when i view my movie - its still acid green...
    any suggestions on what I'm overlooking? below is directions I was
    following. The only think different i did was bring in elements
    from HaloTheme instead of SampleTheme (I like the look of halo
    better).
    # Select File > Import > Open External Library, and
    select the SampleTheme.fla file.
    This file is located in the application-level configuration
    folder. For the exact location on your operating system, see About
    themes.
    # In the theme's Library panel, select Flash UI Components
    2/Themes/MMDefault and drag the Assets folder of any components in
    your document to the library for your document.
    For example, drag the RadioButton Assets folder to the
    ThemeApply.fla library.
    # If you dragged individual component Assets folders to the
    library, make sure the Assets symbol for each component is set to
    Export in First Frame.
    For example, the Assets folder for the RadioButton component
    is called RadioButton Assets; it has a symbol called
    RadioButtonAssets, which contains all of the individual asset
    symbols. If you set Export in First Frame on the RadioButtonAssets
    symbol, all individual asset symbols will also export in the first
    frame.
    # Double-click any skin symbol you want to modify to open it
    in symbol-editing mode.
    For example, open the States/RadioFalseDisabled symbol.
    # Modify the symbol or delete the graphics and create new
    graphics.
    You may need to select View > Zoom In to increase the
    magnification. When you edit a skin, you must maintain the
    registration point in order for the skin to be displayed correctly.
    The upper-left corner of all edited symbols must be at (0,0).
    For example, change the inner circle to a light gray.
    # When you finish editing the skin symbol, click the Back
    button at the left side of the edit bar at the top of the Stage to
    return to document-editing mode.

    figured out how to change the colors using styles... without
    help. So never mind I guess.

  • Trouble with component check-in in trasport studio

    Hi,
    I have succesfuly created a new application track in landscape configurator of CMS.
    In the track the dependencies were automaticly brought in like they should.
    But under Transport Studio under Check-In tab, there are no entries at all for me to check in.
    Any idea what is missing?
    Thank you.

    Hi,
    You can do the following checks:
    1) If you are trying to check in by coping to the CMS inbox then you can just give inbox in the "Configure checkin option" , if you have copied inside a directory "EPS" inside the inbox then u cud give inbox\EPS
    2) If you are trying to chek in from a particular location like "D:\usr\sap\trans\EPS\in" (from the error log) then check if the location is present. But I think that in configur checkin option you give relative path and not absolute path
    3) Check if your transport directory is fine and if it is shared.
    The links below will give you more details on check in of archives, Transport Directory
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/44/0d18d725301a78e10000000a1553f6/frameset.htm"></a>
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/0b/eb18ff7c7ed647ae51cfcc5d69e5d9/frameset.htm"></a>
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/38/c898be538811d2b412006094b9ea64/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/38/c898be538811d2b412006094b9ea64/frameset.htm</a>
    Hope this helps.
    Akshatha

  • Having trouble with guitar interface audio output

    I'm having trouble with auido with a guitar link interface. It is an electric guitar, and a Berhinger guitar link interface usb. What could be the proble and how do I troubleshoot it? Oh It is for my imac 21.5 22011.

    Solved the Problem by un-checking “Enable Hardware Acceleration" after right-clicking a Flash Video and clicking Settings !!

  • Troubles with the creation of New Custom Adapter for NW 7.1

    Hi guys !!!
    I have some troubles with the creation of a new custom adapter for NW 7.1. I have followed some pdf and notes, like :
    [Upgrade an SAP NetWeaver PI 7.0 Adapter to SAP NetWeaver PI 7.1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0667f56-96c7-2b10-0e9a-c40fbd523f4d]
    note : 1004000
    I have all the materials to make the custom Adapter ( like file .sca with all .rar and .sda , like file sample_ra.rar with all the file .java, like all the libs for the projects ) and I have make it !!! But, when I try do deploy it, i recieve a warning that i don't understand, this is the warning :
    S U M M A R Y
    ~~~~~~~~~~~~~~~~~~~
    Successfully deployed:           0
    Deployed with warnings:           1
    Failed deployments:                0
    ~~~~~~~~~~~~~~~~~~~
    1. File:C:Users
    maienzaDesktopCreazione del SDAPI71_AF_myFirstCustomAdapter_ver_2.0.sda
         Name:PI71_AF_myFirstCustomAdapter_ver_2.0
         Vendor:sap.com
         Location:SAP AG
         Version:7.1007.20090310105326.0000
         Deploy status:Warning
         Version:NEW
         Description:
              1. Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
         at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Result
    Status:Warning
    I have see in the nwa if there are some applications or services that are stopped but all the necessary it's started, just one question : in the pdf for upgrade from 7.0 to 7.1 no one speaks about ejBean or about a creation of it ... it's necessary an ejBean ?? Beacause in the file .sda of the file .sca that i have downloaded there are more of the adapter with ejBean ....
    Antonello

    Hi,
    the adapter metadata it's been created but my service is still stopped; when I try to start it, in the NDWS -> Deploy view -> tab Repositary view, I receive this errors, one after the other, cause I try to start it 3 times and in each time I received 3 differents errors :
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)

  • Little troubles with DVB-S2 via MPlayer

    Hi,
    I use the MPlayer already for quite a while to stream DVB-S and DVB-S2 with it. But for approximately two weeks something changed while watching HD-channels: the video track lags every few seconds; the audio track is quiet normal. However, the non-HD channels hide the problem.
    E.g. while watching a German HD-channel, I find following terminal outputs:
    [h264 @ 0xf2b820]mmco: unref short failure
    [h264 @ 0xf2b820]reference picture missing during reorder
    [h264 @ 0xf2b820]Missing reference picture
    [h264 @ 0xf2b820]Increasing reorder buffer to 2
    h264 @ 0xf2b820]Increasing reorder buffer to 3
    [h264 @ 0xf2b820]Increasing reorder buffer to 4
    [mpegts @ 0xeb3080]PES packet size mismatch
    **** Your system is too SLOW to play this! ****
    Specially this message I can't understand, because I'm using a CPU AMD Phenom II X4 955 3,2 GHz, 8 GB Corsair XMS3 DDR3 RAM and the graphic card ASUS GTX 460 Top GDDR5 PCIe 1024 MB. But, let's continue with the outputs:
    [h264 @ 0xf2b820]concealing 880 DC, 880 AC, 880 MV errors
    [h264 @ 0xf2b820]mmco: unref short failure
    [h264 @ 0xf2b820]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
    [h264 @ 0xf2b820]illegal short term buffer state detected
    Furthermore I'm using two HHD WD20EARS, which are connected to RAID1 via 3ware 9650SE-2LP, and the DVB hardware decoder card Hauppauge WinTV-NOVA-HD-S2. My desktop environment is KDE SC 4.8.
    For starting the DVB-S2 streaming I use szap-s2 -r -p -S 1 -c ~/.mplayer/hdchannels.conf "NAME-OF-THE-HD-CHANNEL" in one terminal and mplayer /dev/dvb/adapter0/dvr0 -demuxer lavf -cache 8192 in a second terminal.
    I just mention all this stuff because I've absolutly no idea, what could be the reason. Before this troubles started, two weeks ago, everything worked flawlessly. Checking the /etc/log/pacman.log I can find out, that the Linux kernel was upgraded from 3.2.6-2 to 3.2.7-1 on 24th February. I'm not sure, but maybe since that time these failures appears. Presently I'm using Linux 3.2.8-1.
    Has anyone an idea what might just be the cause? (Perhaps it could be a option to try the LTS-kernel?)
    Last edited by maik-hro (2012-04-13 10:39:59)

    So, today I just made some small tests. First of all I tried to start a HD-channel with WinTV7 on Windows 7: The channel was streamed correctly for almost one minute and than it was lost - and I had no possibilty to get it back.
    After that I tried again to start the same HD-channel on Linux. I apologize in advance to the large amount of text but following is the terminal output of the first minute (finally canceled by STRG + C):
    MPlayer SVN-r34799-4.6.3 (C) 2000-2012 MPlayer Team
    183 audio & 398 video codecs
    mplayer: could not connect to socket
    mplayer: No such file or directory
    Failed to open LIRC support. You will not be able to use your remote control.
    Playing /dev/dvb/adapter0/dvr0.
    Cache fill: 17.97% (1507328 bytes)
    libavformat version 54.2.100 (internal)
    libavformat file format detected.
    [NULL @ 0xf50700]non-existing SPS 10 referenced in buffering period
    [NULL @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 10 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 11 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 11 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 12 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 12 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 13 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 13 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 14 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 14 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 3 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 4 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 5 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS referenced
    [h264 @ 0xf50700]non-existing SPS 6 referenced in buffering period
    [h264 @ 0xf50700]non-existing PPS 0 referenced
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]no frame!
    [h264 @ 0xf50700]mmco: unref short failure
    [h264 @ 0xf50700]mmco: unref short failure
    [h264 @ 0xf50700]Increasing reorder buffer to 1
    [h264 @ 0xf50700]Increasing reorder buffer to 2
    [h264 @ 0xf50700]Increasing reorder buffer to 3
    [h264 @ 0xf50700]Increasing reorder buffer to 4
    [h264 @ 0xf50700]mmco: unref short failure
    [mpegts @ 0xed4800]Estimating duration from bitrate, this may be inaccurate
    [lavf] stream 0: video (h264), -vid 0
    [lavf] stream 1: audio (mp2), -aid 0
    LAVF: Program 11100
    LAVF: Program 11110
    LAVF: Program 11120
    VIDEO: [H264] 1280x720 0bpp 50.000 fps 0.0 kbps ( 0.0 kbyte/s)
    Load subtitles in /dev/dvb/adapter0/
    Cache not responding! [performance issue]
    Cache not responding! [performance issue]
    ==========================================================================
    Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
    libavcodec version 54.8.100 (internal)
    Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
    ==========================================================================
    ==========================================================================
    Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
    AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000)
    Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
    ==========================================================================
    [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory
    AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
    Starting playback...
    Unsupported PixelFormat 61
    Unsupported PixelFormat 53
    Unsupported PixelFormat 81
    [h264 @ 0xf50700]Missing reference picture
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]concealing 3600 DC, 3600 AC, 3600 MV errors
    [h264 @ 0xf50700]Missing reference picture
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]concealing 3600 DC, 3600 AC, 3600 MV errors
    [h264 @ 0xf50700]Missing reference picture
    [h264 @ 0xf50700]decode_slice_header error
    [h264 @ 0xf50700]concealing 3600 DC, 3600 AC, 3600 MV errors
    [h264 @ 0xf50700]Increasing reorder buffer to 1
    Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
    VO: [vdpau] 1280x720 => 1280x720 Planar YV12
    A:61580.2 V:61580.9 A-V: -0.639 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0 50%
    [h264 @ 0xf50700]reference picture missing during reorder
    [h264 @ 0xf50700]Missing reference picture
    [h264 @ 0xf50700]mmco: unref short failure
    A:61580.3 V:61581.1 A-V: -0.742 ct: -0.004 0/ 0 ??% ??% ??,?% 2 0 50%
    [h264 @ 0xf50700]Increasing reorder buffer to 2
    [h264 @ 0xf50700]Increasing reorder buffer to 3
    [h264 @ 0xf50700]Increasing reorder buffer to 4
    [h264 @ 0xf50700]mmco: unref short failure
    A:61585.5 V:61586.0 A-V: -0.430 ct: -0.490 0/ 0 86% 7% 0.7% 125 0 50%
    [mpegts @ 0xed4800]PES packet size mismatch
    A:61585.9 V:61586.3 A-V: -0.400 ct: -0.520 0/ 0 85% 7% 0.7% 125 0 50%
    **** Your system is too SLOW to play this! ****
    Possible reasons, problems, workarounds:
    - Most common: broken/buggy _audio_ driver
    - Try -ao sdl or use the OSS emulation of ALSA.
    - Experiment with different values for -autosync, 30 is a good start.
    - Slow video output
    - Try a different -vo driver (-vo help for a list) or try -framedrop!
    - Slow CPU
    - Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts,
    e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all.
    - Broken file
    - Try various combinations of -nobps -ni -forceidx -mc 0.
    - Slow media (NFS/SMB mounts, DVD, VCD etc)
    - Try -cache 8192.
    - Are you using -cache to play a non-interleaved AVI file?
    - Try -nocache.
    Read DOCS/HTML/en/video.html for tuning/speedup tips.
    If none of this helps you, read DOCS/HTML/en/bugreports.html.
    A:61589.5 V:61587.1 A-V: 2.333 ct: -0.432 0/ 0 83% 7% 0.8% 125 0 50%
    [h264 @ 0xf50700]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
    A:61589.5 V:61587.2 A-V: 2.334 ct: -0.430 0/ 0 83% 7% 0.8% 125 0 50%
    [h264 @ 0xf50700]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
    A:61589.5 V:61587.2 A-V: 2.332 ct: -0.428 0/ 0 83% 7% 0.8% 125 0 50%
    [h264 @ 0xf50700]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
    A:61592.2 V:61589.9 A-V: 2.242 ct: -0.422 0/ 0 58% 5% 0.9% 125 0 50%
    [h264 @ 0xf50700]mmco: unref short failure
    A:61592.6 V:61590.2 A-V: 2.438 ct: -0.396 0/ 0 61% 5% 0.9% 131 0 50%
    [h264 @ 0xf50700]number of reference frames (0+6) exceeds max (5; probably corrupt input), discarding one
    A:61646.7 V:61646.7 A-V: 0.000 ct: 1.818 0/ 0 62% 6% 0.8% 724 0 50%
    MPlayer interrupted by signal 2 in module: decode video
    MPlayer interrupted by signal 2 in module: enable_cache
    A:61646.7 V:61646.7 A-V: 0.000 ct: 1.818 0/ 0 62% 6% 0.8% 724 0 50%
    Exiting... (Quit)
    Starting the same channel in SD I get these feedback:
    MPlayer SVN-r34799-4.6.3 (C) 2000-2012 MPlayer Team
    183 audio & 398 video codecs
    mplayer: could not connect to socket
    mplayer: No such file or directory
    Failed to open LIRC support. You will not be able to use your remote control.
    Playing dvb://ARD.
    dvb_tune Freq: 11836000
    Cache fill: 17.58% (368640 bytes)
    TS file format detected.
    VIDEO MPEG2(pid=101) AUDIO MPA(pid=102) NO SUBS (yet)! PROGRAM N. 0
    VIDEO: MPEG2 720x576 (aspect 3) 25.000 fps 15000.0 kbps (1875.0 kbyte/s)
    ==========================================================================
    Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
    libavcodec version 54.8.100 (internal)
    Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
    ==========================================================================
    ==========================================================================
    Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
    AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000)
    Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
    ==========================================================================
    [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory
    AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
    Starting playback...
    [VD_FFMPEG] Trying pixfmt=0.
    Could not find matching colorspace - retrying with -vf scale...
    Opening video filter: [scale]
    The selected video_out device is incompatible with this codec.
    Try appending the scale filter to your filter list,
    e.g. -vf spp,scale instead of -vf spp.
    [VD_FFMPEG] Trying pixfmt=1.
    Could not find matching colorspace - retrying with -vf scale...
    Opening video filter: [scale]
    The selected video_out device is incompatible with this codec.
    Try appending the scale filter to your filter list,
    e.g. -vf spp,scale instead of -vf spp.
    [VD_FFMPEG] Trying pixfmt=2.
    Could not find matching colorspace - retrying with -vf scale...
    Opening video filter: [scale]
    The selected video_out device is incompatible with this codec.
    Try appending the scale filter to your filter list,
    e.g. -vf spp,scale instead of -vf spp.
    Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
    VO: [vdpau] 720x576 => 1024x576 Planar YV12
    A:36766.2 V:36766.2 A-V: -0.001 ct: -0.332 19241/19241 14% 2% 0.7% 9 0 49%
    I will not get rid of the feeling that it might actually be due to faulty input signals. May something's wrong with the satellite system (LNB, multi switch, something else)?

  • Trouble with itunes and time machine

    i am having trouble with my iphone and thought it may have been itunes, so i went into time machine and tried to replace my current version of itunes with the last one. Everything went fine until i got right to the end of replacing it. it said i didnt have the authorization to do that...or something along those lines... now i cant even open itunes, ill click on it and it just bounces once and thats it. can anyone help me!?

    I haven't been able to back up to my FreeAgent external hard drive
    The TM disk is your backup destination and I assume it is the Seagate FreeAgent disk. The source is your Mac.
    Wireless. I have a Seagate FreeAgent external hard drive plugged in by USB to the mac.
    You say it is connected via USB, yet your are saying backups are done wirelessly.
    From Terminal, can you post the output of tmutil destinationinfo (remove any personal information as you see fit)?

  • CS5 Error with Animation Output

    Running CS5 on a Mac 10.6.4
    Every time I render, it gives the following error message:
    An output module failed. The file may be damaged or corrupted. (-1610153464)
    I've tested the files on a different machine and they open and render out fine.
    I did some searches and for some it was the dreaded Optical Flares plugin from Video CoPilot causing this same problem.
    I'm having these issues and I don't have any plugins installed.
    Re-Installed everything 3 times, trashed preferences, removed plugins from the Application support and still no luck.
    The only thing that works for me is outputting to a PNG or JPEG sequence.
    If I try to render using the Animation preset, It gives the error message.
    I also have been getting a weird "MooV" error message when I try to import certain types of quicktime files. Not all just a few random ones.
    All of this leads me to believe it may be an issue with 32 bit Quicktime.
    Any suggests on how I can get the Animation preset working again?
    Thanks.
    It gives an error message

    Sure, I had the exact problem posted at the top of this thread. Spent two days reading all the posts regarding anything that had to do with this Output Module error. I finally came upon a post of someone who was having a similar issue as I with the hang at start up. However, the post was replied to by a guy who said "Repeat the hang with only AE running,  then go to the Activity Monitor and select the QT32 Server process.   Then press the "Sample Process" button at the top of the window...It looks like both of you are having a similar problem with a third party AVI codec.  Please remove or uninstall any third party AVI codecs such as DivX,  XVid, etc. from your system and try AE again."
    "You can also temporarily disable these components by closing any QT related apps and then dragging components out of the Library/QuickTime folder on your boot drive.   If that works, try adding them back one by one until it fails again.  That is the problem codec."
    So I removed AviImporter.component from Library/Quicktime on the boot drive and these two problems were solved.
    Here is the link to the post where I found this info.
    http://forums.adobe.com/thread/634237?start=0&tstart=0

  • Trouble with Skype. can't hear caller but I can see caller.

    Trouble with Skype.  Caller cannot hear me but I can hear caller.  Cannot hear voice on test call.  Can see caller.  MIcrophone is on  and volume turned up.

    Michele,
    I do not have Mavericks running on my older MacBook Pro. During the call, do you have the microphone icon on the Skype window enabled or disabled? Have done that before.
    My Skype preferences:
    Microphone: Built-in Microphone (Internal microphone)
        * Automatically adjust microphone settings is set
    Ringing and Speakers: Built-in Output (Internal Speakers)
    Camera: Built-in iSight.
    System Preferences > Sound
    Input tab: Internal Microphone
    Output tab: Internal Speakers

Maybe you are looking for

  • How to find out who was the previous owner of an iPad?

    My sister has recently found an iPad 1 WiFi on a bus. To determine the actual owner she had a friend to reset the iPad to factory settings (not sure why though) and now all initial data is lost. Apple Store could not help much, as the iPad was sold b

  • Keynote won't open

    I tried to open a PPT file in Keynote and it crashed. Ever since then, Keynote won't open at all. It seems to open, then crashes in 5 seconds. Need to use Keynote on my laptop and I don't have my discs right now either.

  • Displaying HTL file in a separate window

    i have aportal page where i have a portlet which clip whole contents of the HTML file xfile.html Banner & Logog of the Company | xfile.htma appears here | ----------| |------------- | =Printer View | ----------|--------------------------------------|

  • Recording using the Line in on my lenovo g550

    Hi Guys I have been using the microphone in on my g550 to record music and when I record it any replay it the music sounds quite poor quality. Are there any internal presets I can change to improve this?

  • Using XML to persist data

    Im developing a small application and choosed to use XML instead of MySql because it's smaller and do not require to install a database on the client after software distribution. The strategy was not keep all data in the XML file, so some parts are s