Trouble with loading photos!

I have two problems with loading and hoping someone can help me in the forum.
1) After importing new photos to LR they all come in a mixed order and not in the order they where photographed. I have tried to rename them first in Bridge but with no success.
2) When the photos are loaded in lightroom it takes a terrible long time for each photo to be charged. Seams like every photo needs to be loaded again.
I use a PC and just bought LR but have experience of LR before with an earlier version. Use a Canon 5D mark II.
Very much appreciate help with this!!
Åsa

Thanks for your help!
Managed to sort the photos in the right order!!!
To make the photos charge faster I changed it to 1/1 and I feel it loads a bit faster but still slow in my opinion.
It now takes about 10 sec to load the photo ( in develop ) instead of 20 sec and wonder if this is normal or not. Should it not load faster !?
I have heard that if I save the catalog in a certain place its supposed to charge faster but can´t remember where and can that be the answer.
Thanks!!!
Åsa

Similar Messages

  • Trouble with loading photos from a disc can you help?

    I keep getting about half the photos with the message unrecognized format.

    Most of this is because InternetAddress.toString isn't returning a nice
    string for printing. You probably want to use the toUnicodeString method,
    or perhaps just the getAddress or getPersonalName methods.

  • IPhoto: trouble with sending photos via gmail.

    For some reasons, for about one or two months ago start having troubles with sending photos from iPhoto via gmail.
    It used to work perfectly, but now refuses to send photos. Pop up message says that there are some trouble with accessing accounts.
    Once I restart my computer it works well again.

    Hello ilya,
    In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
    Then click the Show Details button & Check again.
    Mail: Can't send messages, "Cannot send message using the server smtp.xxxxx.com" alert appears...
    http://support.apple.com/kb/TS1482

  • Having trouble with iCloud Photo Stream on a Windows Vista 64 machine.

    Having trouble with iCloud Photo Stream on a Windows Vista 64 machine.  Can you tell me why Photo Stream will not stay enabled.  When I reboot, it will disable not to mention that it will not get any pushed photos.  Is there a 64 bit version?

    Hello tw_mama,
    I was looking into the issue you are experiencing and found an article that may shed some light on the subject. It's called iCloud: Account troubleshooting found here: http://support.apple.com/kb/TS3988
    This section in particluar:
    I get an "Unsupported Apple ID" error when I try to sign in to iCloud from my iPhone, iPad or iPod touch.
    Depending on how you created your Apple ID, you may not be able to create an iCloud account with your current Apple ID. If your Apple ID works in the iTunes Store, App Store, Game Center, FaceTime, or with other Apple Services, your Apple ID should work for iCloud. Also, if you created your Apple ID while you applied for a job at jobs.apple.com, your Apple ID should work for iCloud. If you cannot use your Apple ID with any Apple Services, it might not be compatible with iCloud. Contact iCloud Support for assistance.
    All the best,
    Sterling

  • Has anyone else had trouble with their photo app? everytime I try to edit a picture my phone restarts.

    has anyone else had trouble with their photo app? everytime I try to edit a picture my phone restarts.

    You have to go into your Gmail account settings.
    Then Security.
    Then turn ON 2-Step Verification
    Follow the instructions to link a cell phone to your google account. They will text you a secondary code and once you've entered that your 2-step verification will be set up.
    Then you should have the option on the bottom of the page to add a device. Call it apple tv and then it will generate a secondary code specifically for your Apple TV.
    On the Apple TV itself, ultimately I think you have to enter just the first part of your e-mail address (before the @gmail.com) as your Youtube login username.
    Then you should enter your gmail account password.
    Apple TV will tell you it is incorrect.
    Then, retry and enter the long secondary password that google generated for the apple tv.
    That should do it.

  • DW MX trouble with loading PDF files

    I'm using Dreamweaver MX on an XP Pro machine and have
    trouble loading pdf documents to my web pages. It cooperates
    intermittently. I'm using a virtual pdf printer to convert word
    documents to pdf, then saving them to my website folder, selecting
    the linking text on my page in DW, using the link box to select my
    pdf document, then saving the page and putting files in both the
    local and remote views.
    This method has worked for me before, and now it's not. Does
    anyone know of a reason for this? The documents are saved
    correctly, as I can get them to open as pdf outside of dreamweaver
    and my webpage...when I click on the link I created online I get
    "page not found."
    Thanks for any help!

    I am having the same trouble with Dreamweaver MX 2004 on
    Mac-OSX since I switched from MacOs9. I still have no solution .
    When I want to export a .pdf file I get a message saying <ftp
    error>.
    I never had problems on Mac Os 9 and it started when using
    the first version of Mac Os X. I am presently using mac Os 10.4.10
    and I am still unable to transfer .pdf files, no matter whether I
    use acrobat or the Mac system to produce the.pdf file.
    When I try the page on my computer the link to the.pdf file
    functions allright, but not on the server as the file cannot be
    transfered to it by the software.
    Does someone know how to solve this ?
    Q]
    Originally posted by:
    milflib
    I'm using Dreamweaver MX on an XP Pro machine and have
    trouble loading pdf documents to my web pages. It cooperates
    intermittently. I'm using a virtual pdf printer to convert word
    documents to pdf, then saving them to my website folder, selecting
    the linking text on my page in DW, using the link box to select my
    pdf document, then saving the page and putting files in both the
    local and remote views.
    This method has worked for me before, and now it's not. Does
    anyone know of a reason for this? The documents are saved
    correctly, as I can get them to open as pdf outside of dreamweaver
    and my webpage...when I click on the link I created online I get
    "page not found."
    Thanks for any help!

  • Why is iphoto having trouble with rotating photos all of a sudden?

    i've been using iphoto for a few years. suddenly it un-rotated all of my auto-rotated photos (which screwed up all of my face tags) and now when i upload new photos, if they auto-rotate during the upload they appear in the preview of a whole event, but if i double-click to see a vertical photo, or try to do a slideshow, i get the triangle with an exclamation point in it, indicating that something's wrong with the file. is anyone else having this trouble? or have any idea what to do?
    thanks...

    I've never used the Flickr feature so don't know if that as any bearing on the problem.  if you're satisfied with the newly "fixed" library you can delete the copy of the original library that you made. 
    However, since you're having problems with rotated photos you might try this and see if the new library has the rotated photos displayed correctly:
    Start over from scratch with new library
    Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
    1.  Move the existing library folder to the desktop.
    2. Open the library package like this.
    Click to view full size
    3. Launch iPhoto and, when asked, select the option to create a new library.
    4. Drag the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
    Click to view full size
    This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects.
    If the rotated photos display correctly in this new library then the problem lies with the orther libraries being damages somehow.  You may want to stay with the new library even though the projects, i.e. books, etc. and keywords are lost. 
    If you have a lot of keywords in your current library and want to move them to the new library you can by doing this:
    1 - open the old library and select one photo.
    2 - type Command+K to brinb up the keyword pane.
    3  - click on all of the keywords that are not blue so that all of the keywords are blue.
    4 - export that photo to the Desktop via the File ➙ Export ➙ File Export menu option. Select Kind=JPEG and check the two check boxes regarding keywords, locations, etc.
    5 - open the new library with iPhoto and import the exported photo from the Desktop.  That will bring in all of the keywords so that you don't have to recereate them one by one in the new library.

  • Trouble with 30Gb Photo

    first time posting on here... I looked back through a few page to see if this issue had already been addressed.
    A few days ago, my 30Gb iPod Photo started skipping songs on its own. So after resetting it, it lost all it's content. I've read a couple troubleshooting guides about the computer not recognizing the iPod, but still haven't yet found a way to restore my iPod.
    When using the updater, I get many different error messages such as "Can't mount iPod" or "iPod service error"
    I've tried re installing just about every iPod related software on my computer, as well as trying to Format my iPod (which I can't even do).
    I'm hoping I don't have to send this out for service, as my warranty expired 6 days ago...
    Can anyone help me out?
    Thanks,
    Alex
      Windows XP  

    The Sad iPods icon or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
    1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    Still can't see your iPod?
    Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
    3. Try to wait 30 minutes while iPod is charging.
    4. Try another known-good FireWire or USB through Dock Connector cable.
    5. Try another known-good FireWire or USB port on your computer .
    6. Try to disconnect all devices from your computer's FireWire and USB ports.
    7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
    9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
    “Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
    - I tried the 5in1 test and got and error on Firewire.
    - I did the HDD R/W and surprisingly it passed.
    - I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
    My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
    Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
    10.Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
    Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
    Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
    Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
    But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
    I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Pictures and instructions of how to open the iPod case for battery replacement
    http://www.kokopellimusic.us/KM_instructions.htm

  • Firefox will not load my gmail, cleaned history, still will not load. I switched to goggle Chrome and I have no trouble with loading all programs. What is going on?

    All of a sudden it will not load my gmail. Restarted my computer, cleaned up history still not working on gmail. recently updated Firefox a few days ago, but I have not had trouble until today with loading gmail. Worked earlier.

    The problems are getting worse. I think I will have to give up on Firefox and go with the Google browser. No problems with IE just firefox and I can't take it anymore.

  • I am having trouble with a photo book when I preview

    I am having trouble submitting a photo book because the images are showing up funny when I preview.  Can you help me to fix this problem?  I spent weeks making this as a gift.  Am so disappointed.

    Can you elaborate on showing up funny?

  • Having trouble with loading the internet?

    Hi Everyone,
    For the past 3 week or so, my 8 month old MacBook Pro has been painfully slow with loading my internet... Taking minutes sometimes. And i've noticed lately that the little spinning beachball has been appearing, the first time in 8 months.
    Someone please help

    Hi c,
    You are not alone. Some people have found that disabling IPv6 has helped:
    Internet Troubleshooting
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/11395.html
    http://support.apple.com/kb/HT1714
    IPv6 troubleshooting http://support.apple.com/kb/TS3802
    OpenSystem Preferences > Network > select AirPort > click on Advanced >TCP/IP > Configure IPv6 > Off > OK > Apply > Turn AirPort Off> Turn AirPort On
    OpenSystem Preferences > Network > select Ethernet > click on Advanced> TCP/IP > Configure IPv6 > Off > OK > Apply

  • I am having trouble with my photo album not transporting a picture to facebook

    I am having trouble posting pictures I have taken on my iPad to Facebook. I use to be able to do it tried several times yesterday and they never posted. I am thinking I have messed up something with my settings but I am unclear how to correct. Help ...

    There is also a setting in restrictions - Settings>General>Restrictions>Privacy>Photos and one for Facebook, did you restrict anything in there?

  • Trouble with loading videos - Manually manage music and videos not supported now with iOS5 and a 1st gen iPad?

    Since updating my iPad 1st gen to iOS5.0.1 videos don't get loaded properly into the Videos app.
    On the Summary page in iTunes of my docked iPad, I have always checked the box for "Manually manage music and videos".
    I have my reasons for doing it this way, but that's for another thread perhaps.
    The problem is that when I load a video to my iPad this way - by simply just dragging it from the desktop and onto the iPad, under Devices in iTunes - it copies/updates, and shows up on the iPad like it always has before iOS5. But now, with iOS5, when I undock, it can't be found anywhere within the Videos app on the iPad. The only way I can find it is to do a Search, which seems to find it, but when I click it, a different video plays - the first video in the Movies list in the Video app. Dock the iPad again, yes the video is there, according to iTunes, but no way to play it once iPad is undocked.
    My suspicion is that with iOS5 you are no longer able to use the "Manually manage music and videos (Mmm&v)" that you will be forced to run everything through iTunes - and probably iCloud. I've unchecked the Mmm&v box, and get prompted with "Are you sure? - All existing content on the iPad will be replaced with content from your iTunes library". READ - "Rebuild your entire video and music collection, and this time run it all through iTunes. Welcome to iOS5. Have a nice day or two wasting your time rebuilding your entire video and music collection. Don't fight it. Use iTunes for everything! Until we finally make iTunes a decent piece of digital media management software, then you'll have to do it all again."
    Okay, rant over - Anyone out there with running iOS5 on a 1st gen iPad with the Mmm&v option checked and able to load a video manually (not through iTunes)? Any other thoughts?
    Thanks

    Yea, i managed to fix my issue in a wild fashion way But I DONT suggest it to anyone.
    I like to hear why it happened after upgrading iTunes and if there is any peaceful solution.
    Bythe way, here is how i fixed it :
    1-i checked "manually manage music and videos" checkbox and clicked on "Sync" button
    2-It showed a threating message that it will erase my music and videos ,......
    3-I clicked on OK button and let iTunes do any thing she said , but the second it started to delete my treasures from my iphone, i disconnected my phone by pulling USB cable.
    Now i have my musics and videos untouched and got that Option enabled again and i can manage my Music/Videos and Books manually.

  • HT204264 I am having trouble with the Photos app.

    I have a 2011 macbook air with a core i7 and 8 megs of ram and a 512 gb hard drive that has plenty of space left. When I upgraded to 10.10.3, it switched my iPhotos app for Photos. Now when I run the app, it makes my fan go crazy and my processor usage goes through the roof on activity monitor. When I quit, everything goes back to normal. I have about 7000 pics and iPhoto would be slow when I would use it, but not like this. I thought Photos was supposed to be able to handle large photo libraries. I haven't heard of anybody else having this problem online. The only thing I can think of is when I started it up and it was "optimizing" or something, I ignored that message and closed it or something. But now I have let it run overnight and it shows no improvement. Thanks for any help you can offer!

    RR,
    Not to worry, you're not the first to expect Print to finish by returning you to the edit mode. The thing is that Printing is so hit and miss with this version of the app, you will probably want to stay in the Print window for more than one attempt.
    Jerry

  • Trouble with loading tiger OS

    Okay I honestly think that this MAC is shot but I though that I might as well ask. But I am working on a Power PC MAC G4 with glass doors and i am trying to load MAC OS X Tiger to the computer but every time I turn on the computer it comes up with the screen saying that no internal hard drive can be found. I have attempted the following.
    1st I switched out the hard drives with another G4 mac that has tiger on it and the mac was able to recognize the hard drive, but went to the mac "blue screen" shortly after.
    2nd I attempted a clean hard drive and when activated it gave me the could not find a hard drive screen again.
    3rd I inserted the tiger os cd into the cd drive and attempted to hold do C to load from the optical drive.
    4th I tried the "command option shift delete" command to attempt a bypass of the hard drive in hope that the next system the mac would load would be the cd-dvd drive. This too failed.
    5th grabbed a sledge hammer and nailed the thing about 5 times due to frustration. (No actually I did not, but I am contemplating it)
    Anyone got any advice or anything to try?

    The Mirrored Doors are actually polished Stainless Steel, not glass.
    Behind those shiny doors you may have a CD reader or a DVD reader, or both. But if you want to install 10.4 Leopard, it will need to be a DVD reader.
    From your descriptions, it sounds like you may have some Directory damage on one or more Hard Drives.
    Applications > Utilities > Disk Utility
    ... can do a Repair of a non-boot drive, and a Verify of a Boot drive in 10.4 and later while the system is running. That would be a good place to start. repair Permissions on the boot drive can be helpful also.

Maybe you are looking for

  • Video inserted into AP Element - Audio keeps playing on rollout

    Hi, I have created an AP Element that on rollover a thumbnail video plays of the full video. This works fine. However on rollout, the video does disappear, but the Video Audio keeps playing. How do I stop the Audio playing when the user rolls out of

  • Caluculating Security deposit

    hi all, Is there any FM/BAPI which used to calculate the Security deposit for a contract account. With regards, Sumanth

  • How to trigger a BPM from an outside WSDL

    Hello, I've always used the option "Service Interface" in the Start Step of the process before updgrading to SP05 (CE7.2). Now I see that I don't have that option, now I have a trigger option and the wsdl I've manually created isn't an option of the

  • Can I use Adobe CS3 on a MacBook?

    I know Adobe's CS3 is for use on MacBook Pro and upwards, but could I run it on a MacBook with 1gb ram,120gb hd or would there be to many problems. MacBook   Mac OS X (10.4)  

  • Stacking of macro images?

    Could someone explain which piece of Photoshop software is most suitable for stacking closeup images of the same subject over large depth of field so that I can achieve a crisp image of the subject by Blending?? Also,  can I upgrade to this software