Trouble with my Cartrigde or Printhead on HP 1210 all-in-one

Recently I bought new cartridge for my HP 1210 al-in-one Printer 56, 57 Tri-color. I put the cartridge in the slots and still is blinking the light-"Check Print Cartrigde" and not printing. I checked evrything around, even in the back door if there was a paper stuck and everything looked OK. The cartridge is the correct one(the model), so I'm not sure what to do, please help if there is anything that I'm missing or not doing correct.
Thank you!

Hello Dielli,
I understand you are seeing the message "check print cartridge" on you PSC 1210 printer after replacing the ink cartridge. I recognize you have tried some troubleshooting to no avail.
I am going to post a troubleshooting guide below for you to check out and follow. I hope these steps help.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00094661
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

TS3276 I have installed OS X Mavericks on macbook pro, macbook air & iMac but I am having terrible trouble with apple Mail. I need to take all accounts online frequently OR worse I have to quit mail and restart computer. Is anyone else having problems?

I have installed OS X Mavericks on macbook pro, macbook air & iMac but I am having terrible trouble with apple Mail. I need to take all accounts online frequently OR worse I have to quit mail and restart computer. Is anyone else having problems?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

HT201269 Having trouble with ringtones that were previously paid for and now new ones as well on 4S upgrade

4S trouble with ringtones

Hi,
Thanks for your response. I did restore to new location, drive J, and chose "maintain folder structure". So, the catalog and a complete set of my photos was copied to the new external drive J. However, the catalog is still linked to the original set of my photos that are still on drive M. Any ideas?
JRD

How do i remove the printhead on hp 1600xi all in one printer?

I keep getting the message remove and check cartridge on the display of my hp 1600xi all in one printer. I've replaced the ink cartridges. Turned it off, and on. Unplugged it, and plugged it back in. I still get that message. The only other thing that I can think of is to replace the printhead. Any suggestions on how to do this?

Hello jrfirepup, and welcome to the HP Forums.
I see you are looking into printhead options. This particular model of printer has built-in printheads, making them non-removable.
I would recommend removing the cartridges and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest this document on Ink Smears or Streaks.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

"ink system failure" error with code oxc19e0023 on a HP Photosmart Premium All-in-One Printer - C309

"ink system failure" error with code oxc19e0023 on have a HP Photosmart Premium All-in-One Printer - C309g - Have done all the resets and reseated the ink also tried replacing ink with new HP carts..getting frustrated please help
This question was solved.
View Solution.

Have you tried the steps outlined in this article:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
If not give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Problems with lcd screen HP Officejet Pro 8600 e-All-in-One Printer - N911a

The backlighting on my lcd screen has all but gone out. Product HP Officejet Pro 8600 e-all-in-one printer - N911a

Hi greenbeaner, I see that you're having problems with your printer's display. I would take a look at the document below. Officejet Pro 8600 Let me know how it goes.

I'm using internet explorer(yuk!!) and am having trouble with getting back my search engine "google" and all i get is "blank page", can u help?

First of all, forgive me cuz I'm probably NOT the sharpest "chip in a laptop" but I use Internet Explorer as my ISP(I've heard that GOOGLE CHROME is soo much better??) and Google as my search engine. For some reason(I know, probably USER idiot!!) even though I have set in my "internet connections" tab, www.google.com chosen, the minute I click a new tab to look for something else, that dreaded "about blank" or maybe "blank page" comes up.....wtheck???? Can u help me pleeez......thank u ..

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
See also:
*http://kb.mozillazine.org/Error_loading_websites

Having trouble with my filters in the filter gallery not all working on the image.

Bas relief filter is not adjusting all the layers. It is applying the filter to a white screen. The underlying image does not show through. I did this successfully yesterday - can't figure out what went wrong.
The image is in RGB color, 8 bit, and I've tried to do this in both TIFF and PSD formats.
I have been creating images by opening the image and then immediately going into the bas relief filter and applying the filter. This time, when i do that, the preview image in the filter panel goes completely white. I can see very, very faintly that there is the design in there, as though the design is hidden well behind a thick layer of white. I adjust the sliders, and it doesn't help.
To make matters worse, it's doing this for a few of the filters! Some of them work just fine, and some don't!
Where I used to be able to go through the entire filter gallery and see how every filter would love on an image, now many of them just show a white screen when I try to apply them, so I know that it's not only the bas relief filter.
I have a job to turn out - so I need to figure out what I've done wrong!
Thank you very much in advance for your help!

OK - that is the problem! I can't thank you enough!!!
Another question - I have the other file that is exactly what I want to
duplicate. Is there a way that I can go into the other file and see the
color settings for foreground and background that existed prior to the
change and duplicate them?
I was working on several different files that look quite similar, as I was
adjusting the color to have lighter varations. They all started out the
same, though.
It looks like the File>Info shows the process of changes, and I would love
to know what the settings were before the changes- what the settings were
when I opened the file.
Again, I can't thank you enough!

Hi. i am having trouble with my Ipad. I just shuts down all the time and then it will not be turned back on., hi. i am having trouble with my Ipad. I just shuts down all the time and then it will not be turned back on.

Hi I have just gotten a old Ipad 2 to use, wich has a problem. It just shuts down for no reason. then it s difficult to turn it back on. anyone know about this problem

Make sure it's charged.
Try a reset. Hold the Sleep and Home button down (together) for about 10 seconds until you see the Apple logo. Ignore the red slider.

How to clean the printheads on a C209a all in one

I have just replaced all my ink cartridges, but can't get anything to print. I re-installed the printer, ran the 'clean printhead' command in the 'tools' menu and still nothing. Can someone please help me with how to clean the actual printheads manually so that I can get the machine to print?

Hello Macuser0210,
I am sorry to hear that you are having issues with faded streaks on your documents.
I found the following on HP.com. Solution Seven in the document might help you resolve your issue:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02206095&tmp_task=solveCategory&cc=us&dlc=en&la...
Regards,
Lynn_B
I work on behalf of HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Looking for a new printhead for a mp830 all-in-one. For edible imaging.

I am looking to get into starting a small bakery out of my home. I have done some reseach on some edible image printers and seen that the canon prixma mp830 is a good one and was highly recommented . But I bought it 2nd hand and have no idea were to find a new printer head . I can not use the one I have in it now . Does anyone have any idea where or if it will work?

Hi newbaker09,
Canon does not recommend the use of edible ink or icing sheets for use in any of its range of Bubble Jet Printers. The printers are not designed to print with edible inks or to be used with edible icing paper.
Canon has not approved or tested edible inks or icing sheets.
Standard inks (either Canon manufactured inks or other third party inks) are not safe to digest and immediate medical advice should be sought if this were to happen.
If the use of such inks or media were contemplated then extreme caution should be taken to avoid cross contamination with the standard inks and to avoid contact with any of the printer internal components that could contain substances, which may be transferred onto the icing sheet.
In addition to the potential health and safety aspects, the use of these edible inks or icing sheets in your printer could result in reduced print quality, clogging of the printer's system or even damage to the printer's components.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Need help with Apps misbehaving and upgrading the MacOS: The all-in-one post. ;)

Hi there,
So, I've been browsing the SL and Mavericks forums for the last days but although I have fetched some useful tips and answers, still need some help. Let me put it diary-style so I can be more concise ;)
Here's my current system profile:
iMac 27" (aluminium back- if I'm no wrong, from around late 2009-mid 2010)
MacOS 10.6.1 Never updated.
3.06 Ghz Intel Core2 Duo
4Gb RAM
LaCie Big Disk via FireWire 800
Internet access via Ethernet port (cable)
And here's The Issues Log:
– Day one: First ever Kernel Panic. Restart. Nothing (apparently) wrong.
– 3 weeks elapsed: Second Kernel Panic. Same. iMac restarts fine. Apps fine. No missing files. No misbehaviour experiences.
– After a month or so: One morning, Skype decides on its own to stop launching. The night before, I chatted with one of my clients, fine as always, but at the next day, nothing. Computer is usually shut off for the night. And so it was that night. Updated Skype and also did all the guest account trick / repaired permissions / repair ACLs. Nothing worked. Overwrote the Skype app with a former functioning version I have in an MacOS 10.5 system. Didn't work. Now I have to chat on the MacOS 10.5 computer. No good.
– 15 days ago or so: After realising that I no longer have my HP1515n printer (it ran out of inks and thrashed it. It costs more to refill than to buy a new one), I deleted the printer from the printers list in the System Prefs Pane.
– Last week: Acrobat (CS4) won't launch a PDF file and freezes. Spinning beach ball. Force quit and try opening the PDF file again. Freezes again. And again. And again. With that file and every other PDF.
Photoshop CS5 fails to open or crashes when attempting to open any jpg or tiff file. InDesign and Illustrator CS5 are frozen and had to force quit both. MacOS 10.5
Restart the iMac thinking it is just a "common" bad day and hoping everything will be alright after the restart, but nope.
Not only the CS5 stops working; MSOffice stops working too. Spinning beach ball. Begin to suspect of the deletion of the printer, however, I also deleted the same printer in the above mentioned 10.5 system and I'm not experiencing anything strange. Reinstalled the HP drivers but nothing remarkable happens.
Then, try to uninstall CS5, CS4, Office, etc. Try to reinstall Acrobat CS4 and the CS5 apps. Reinstall Office. Nothing. Just Outlook works.
Since I had to desperately meet deadlines, convinced a colleague to come over to the studio and -I know, I know- allowed me to install a copy of CS6. It seems to work fine, except for Acrobat, which randomly freezes/hangs/works and Photoshop, which works fine unless you want to open a layered file containing text layers or if you want to type text on a normal file, because it freezes as soon as the Text Tool is pressed in the toolbar, of course, spinning beach ball again.
Well, Illustrator CS6 sometimes shows a strange black thin frame overlaid on the interface but goes away by switching to another workspace and then back to the current. InDesign CS6 seems to be fine and making PDFs as expected. However, as I said before, it is pure luck if Acrobat accepts to open the file or even if it launches. Spinning beach ball when freezing/hanging.
As a method for eliminating possible culprits, did a clean up of the Suitcase Fusion database, removed duplicate and a few (less than 10) corrupted fonts.
Removed completely MSOffice reinstalled and updated. Nothing. Now I neither have MSoffice running.
I am no rookie but I can't even imagine what can cause such amount of misbehaviour, (kernel panics have something to do? malware? lack of system updates? MacHD is damaged?) so I'm thinking of a few scenarios:
Backing up my projects and user folder –anything else to backup? (In fact I've already done that)– and:
1. Do a clean install. Not sure if it will be best to completely erase the whole drive or if a standard reinstallation will be enough.
2. Take the machine to a Genius Bar to see if there's anything that can be done without major OS messes.
3. Erase the drive and go through the Mavericks upgrading (SL to Ln to MLn to Mavcks), although not sure if this upgrade is worth yet.
4. Replace HD for a brand new one and either step 1 or 3.
5. As a complement, I'm thinking of adding more RAM.
Well. It is really the first time I don't know what to do. I have work to do and would not want to face a week away from my main computer and since most of the files are CS5-6 and hence, can't move to my wife's iMac...
Apologies if this post feels too long, but I will truly appreciate any kind of input and advice on one of more of the issues mentioned in this post.
And if it fits best in any other forum, please also let me know.
Cheers and thanks in advantage.

You have to use the Base Station Menu on the Menu Bar at the very top of your screen.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Hp 1210 all-in-one not communicating with word through my mac

my hp 1210 works fine except when i attempt to print a recently modified word document I get an error message that says "word could not communicate with the printer"
I aborted a print job yesterday and the "job hold" in the print queu has a red stop sign symbol...when i click on the jobs it say there are no pending jobs.
I am at a loss for what to do. I tried rebooting and reconnecting the printer and the mac, no change.

Hello JPV626,
Welcome to the HP Support Forums!
I understand that you are having issues printing with the PSC 1210 on your Mac, seems to be a queue issue on the Mac.
What is the Operating System installed on the Mac?
Try resetting the Print System on the Mac (Mac OS X: How to reset the printing system), Repair disk permissions, install any and all updates on the Mac and restart. Once restarted, add the printer back in System Preferences and try printing.
I will look back for your reply.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP psc 1210 all in one printer - Printing photos with Green Hue

Hey folks,
it used to work fine, now for no apparent reason, it is printing out photos with a strong green hue. They all come out looking very green and yellow.
I have done several things - i have downloaded and updated all printer software and drivers, i have ran all printer calibrations and cleaning programs, i have accessed Macbook utilities folder and ran all colorsync utility's such as repair and adjust hue. What is going on here? I am completely stumped with this one.
Thanks,
Steve.

Hi,
What application you are scanning from? is it Paint or Windows fax and scan?
Can you see the same behavior while using any of those options?
You may find the exact steps to scan on Windows 7 with the PSC 1210 within the FAQs section below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to manually clean printheads on H711N (6700 all-in-one) Printer?

Getting message "printheads missing/undetected/incorrectly installed".
Just need some guidance on cleaning print heads in my 6700. Great printer, I really dont wont to replace it yet.
Windows 7.

Hello there, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about the error message you're seeing on your 6700 Premium printer. Below I have linked you to the guide used for this error message. Also, if you check out the second link and scroll down to Solution three, you will see the instructions on how to clean the printhead, to answer your question.
A 'Missing or Failed Printhead' Error Message
Solution three: Use an automated tool to clean the printhead
I hope this information helps and I have addressed your inquiry!
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Trouble with my Cartrigde or Printhead on HP 1210 all-in-one

Similar Messages

Maybe you are looking for