Troubleshooting "Invalid property name" during EPMA Dimension import
I am trying to import a dimension via EPMA and receiving the error below. I have a couple of questions:
How can that property exist in the first place if it's invalid?
How can I find that property and where it's referenced?
Thanks in advance!
-Ben
Invalid property name: 'CustomTopMemberAsset Class'. Property names must start with a letter or underscore, and can contain only letters, numbers, underscores, and hyphens.
Well, that gets to the root of my issue. I cannot find that property anywhere to change it, nor can I figure out how it got saved in the first place with a space in it.
Similar Messages
-
Create EPMA dimension import profile fails
Hi,
I have registered my source and target system. I have defined my metadata details and try to execute it. Importing and transforming the tree from the source system is successful. However the step "Create EPMA dimension import profile ERPI system profile 21 (Shared) fails.
My source system is PS finance and my target app is EPMA planning application. I have defined the interface schema details in system settings. Not sure what I am missing.
Regards,
Ragav.Jeff,
I have resolved it. I was referencing the EPMA interface data source that I created for ERPI. Instead i changed the EPMA data source name in ERPI to the ERPI schema itself.
Regards,
Ragav. -
Hi All
i have configured the
WebUtil V:106
Jacob v:18
On My Middle Tire
Application Server: V:9.0.4
Connecting To Database: V:8.1.7
"i did recreate the packages for 8i like dbms_lob and ...etc"
my WebUtil Form Work's Fine
as
it displays me the versions for all webUtil Functions 1.0.6
Also when i try to get the Current Browser IP Address it get me successfully .
when i submet this statment to get current browser userinfo like :
webutil_clientinfo.GET_SYSTEM_PROPERTY('user.home')
it workes fine .
The Problem IS:
When is issu this statment :
webutil_clientinfo.GET_SYSTEM_PROPERTY('oracle.forms.webutil.clientinfo.GetClientInfo')
it gives me the error "in jinit":
webutil_clientinfo.GET_SYSTEM_PROPERTY('oracle.forms.webutil.clientinfo.GetClientInfo')2008-فبر-04 15:00:26.984 ERROR>WUI-304 [getSystemProperty()] Invalid Property name oracle.forms.webutil.clientinfo.GetClientInfo supplied
Also When I Try this to Open A Browes Dialog:
DECLARE
FILENAME VARCHAR2(3000);
BEGIN
IF GET_RECORD_PROPERTY(:SYSTEM.CURSOR_RECORD,:SYSTEM.CURRENT_BLOCK,STATUS)IN ('NEW','INSERT') THEN
filename := webutil_file.file_selection_dialog('C:\Temp','*.*','all files (*.*)|*.*|PDF files (*.pdf)|*.pdf|','Select your file ...');
END IF;
END;
it gives me this Error:
WebUtil Error: oracle.forms.webutil.file.filefunctions bean not found. WEBUTIL_FILE.FILE_SELECTION_DIALOG_INT will not work
And My Java Console Contain :
Oracle JInitiator: Version 1.3.1.17
Using JRE version 1.3.1.17-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\Speed
Proxy Configuration: Manual Configuration
Proxy: 10.0.0.1
Proxy Overrides: *.mydomain.com<local>
JAR cache enabled
Location: C:\Documents and Settings\speed\Oracle Jar Cache
Maximum size: unlimited
Compression level: 1
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://myserv.mydomain.com/forms90/java/f90all_jinit.jar from JAR cache
Loading http://myserv.mydomain.com/forms90/java/frmwebutil.jar from JAR cache
Loading http://myserv.mydomain.com/forms90/java/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
إصدار بريمج Forms هو : 9.0.4.0
2008-فبر-04 15:40:19.511 ERROR>WUI-304 [getSystemProperty()] Invalid Property name oracle.forms.webutil.clientinfo.GetClientInfo supplied
Message was edited by:
IGBSpeedCheck whether your webutil.olb is subclassed properly or whether the olb file is available in runtime environment..
-
Invalid Column name during export
When a FULL or USER level export is taken after the export is completed the following error appears.
ORA-00904 Invalid Column name
When I take table level export it complets successfully.
I had run catalog.sql, catproc.sql and catexp.sql.
Mohan
nullHi,
I normaly get this error when using an export utility that has different version from the DB, normally when using an export utility of a version above the DB version.
I hope this will be useful for You.
Bye Max
null -
EPMA dimension import issue with spanish characters
We are using special characters for spanish words, like the word Español.
When this was imported into EPMA using the Import Profile and importing a flat file, EPMA added the alias member as espan then showed a square box and then the l. Then, when deploying the app, no errors recorded in EPMA but planning showed errors since SQL query could not deal with this strange character (the square box symbol) in its query. When I manually change the member in the dimension library to Español, then the app deploys. So my relational database clearly accepts the characters.
So, the problem is in the Import of the text file when it has the special character ñ or other spanish characters with the accent marks or tildes. Is there something I need to do when importing a file with this character or other spanish language special characters?
Thanks
using V11.1.1.3 EPMA with weblogic
JeffHi!
We have the same problem. Please somebody could help us?
Thanks in advance!
Analía -
Error querying fact: -2417217900 invalid column name
Dear Xperts
while validating script logic it gives error"error querying fact: -2417217900 invalid column name P_ACCT"
P_ACCT dimension created by me.
problem has started today while creating new script logic.
as old logic created earlier was sucessfully validated
new logic was created refering document 330 for bpc,so there is no scripting error
pls guide me through this.
thanks
kashyapthanks for ur advice
i was able to validate logics previously.
i tried way you sugested but was unable to validate.
i also tried updating that dimension members but it was giving me some olap querry error while processing dimension after changing dimension members.
so finally i deleted that dimension created new one did whole process again
& was successfull
but i wanted to know why this error could have occured
thanks
kashyap -
BPC - "Error occurs during UpdateRemainData. Invalid column name formula4
Hi All,
After creating a new dimension, I am trying to add members in it.
I am not sure why, but first I got message to include FORMULAH1 and FORMULAH2 as properties to the dimesion. I added those two properties although I do not have any formula for my Dim members.
When I try to process the dimension, I get the error message,
"Error occurs during UpdateRemainData. Invalid column name 'formula4'."
Can anybody throw some light as to why I might be getting this message and how to fix it.
I do not have any column named 'formula4'.
Thanks in advance.
AnuragHello,
You have to have only one property named Formula into the dimension. The formulah1, formulah2, ... should be added corresponding with the number of hierarchies defind in your dimension.
To have an idea more clear, just look to the AcountL on ApShel, which has 3 hierarchies and 3 formulas, but only one FORMULA property.
Best regards,
Mihaela -
Adding dim property - Error processing (Invalid column name)
BPC 5.1 SP3
I'm trying to add FormulaH1 and FormulaH2 properties to a user-defined dim containing two hierarchies. Properties are added and processed without any issues. However, when I subsequently try to process the member sheet, which has two new columns ("FormulaH1" and "FormulaH2"), I receive this error:
- Error occurs during UpdateRemainData. Invalid column name 'formula13'.
Column 13 in the member sheet contains the new "FormulaH2" property. (Column 12 has the "FormulaH1" property).
Any ideas what might be causing this error? I do see the new columns added to the mbr table. I've tried changing the property lengths and "In App" settings---get the same error when processing the member sheet.
Are there issues with added Formula properties to a user-def dim? Or, is there something else going on here?Answered my own question....
I only need to add one property called "Formula". BPC will then add the H1 and H2 "property" columns in the member sheet. -
Importing duplicate members for planning appln - EPMA Dimension Library
Hi,
How to import duplicate members while importing dimensions using flat file in EPMA Dimension Library (11.1.2.1).
We have Isprimary column which enables multiple instances of a member as shared members, but how to import duplicate members in EPMA?
From the EPMA Guide:
Specifying Primary and Shared Instances of a Member using IsPrimary
In import files, any two members in the same dimension, with the same name, are always treated
as separate instances of the same member. If a member has multiple instances in a dimension,
the IsPrimary column specifies which instance is primary and which instance(s) are shared. The
IsPrimary column is not required; however, we strongly recommend that you use it. If left
undefined, it defaults to “True”, which assumes that the member is primary. If left undefined,
a warning is displayed in the Import Results file.
Note: Older import files, that do not use the IsPrimary column, can still be run. However, if the
import file does not have the IsPrimary column, it is not possible to create shared members
or move members.
Thanks in advance.As you are talking about a planning application then duplicate members are not supported but Shared members are.
Cheers
John
http://john-goodwin.blogspot.com/ -
SAINT import of TU/SPS gets error 207 Invalid Column name 'area'
Hi,
I have installed a EHP5 ECC 6 system, Windows 2008 SQLServer 2008R2. Have used SolMan MaintOpz to download the additional Technical Usages (TU) like HCM and SPS to be imported into the system using transaction SAINT.
I am using the stack.xml file for the Saint import.
IMPORT phase have completed, but now I am getting an SQL error 207 duing the XPRA_EXECUTION phase when doing method execution. This stops the SAINT import and when I click on Continue button i will et the same error and SAINT will stop again.
The error is for the support package SAPKB70204 Basis Support Package 04 for 7.02.
The return code for method execution is RC 8.
When I check the log file, the errors are
SQL Error 207 Invalid colun name 'area'
Errors occurred during post-handling MSS_SDBP_AFTER_IMP for SDBP L
The error affects the following components: BC-DB-MSS
Further analysis find that it is trying to run a SQL script and the script fails due to the above error.
I read the script, it contains statements to create a table with a field name 'area' and select statements to this table.
I have tried patching the SAPEXE and SAPEXEDB kernels to the latest but still the same error. Already on the latest kernel level and dbmssslib.dll and tp and r3load and r3trans files due to the patch.
Without fixing this error, my SAINT import will never complete and I will not have a functioning ERP system. The entire team is waiting for me so plese can anyone help me? I am desperate.
Thank you for any advise or help.Check
Note 769842 - SQL errors occur in XPRAS_UPG phase
Markus -
Invalid column name 'SKEY_VAL' Error when Populating a planning dimension
I'm trying to populate a planning dimension from a view in MSSQL. I thought that I had mapped the all of the required columns in my interface in ODI, but I am getting the following error:
207 : S0001 : com.microsoft.sqlserver.jdbc.SQLServerException: Invalid column name 'SKEY_VAL'.
I can see in Operator that ODI is generating the following SQL
select
LEFT(DIM_ACCOUNT.FLEX_VALUE,80) as C1_ACCOUNT,
DIM_ACCOUNT.PARENT_FLEX_VALUE as C2_PARENT,
LEFT(DIM_ACCOUNT.DESCRIPTION,80) as C3_DESCRIPTION,
LEFT(DIM_ACCOUNT.DESCRIPTION,80) as C4_ALIAS__DEFAULT,
SKEY_VAL
from DOT_STAGE.dbo.DIM_ACCOUNT_T_V as DIM_ACCOUNT
where (1=1)
But I don't know why it is asking for the SKEY_VAL column or how I can map a value into this column when setting up the interface?
I've read through the user guide and the getting started guide and I can't find any reference to this SKEY_VAL column.
Does anyone know what causes this error and how I can fix it?1) No SKEY_VAL is not a variable.
2) This is my first attempt at using ODI, I did not create the SQL. All I did was to create a reverse a model against my MSSQL staging database and create and reverse a model against the planning application. Then I created an interface for the Account dimension in planning mapped the account, parent and description columns from my SQL table to the Planning dimension and I get this error. There are no columns called SKEY_VAL in either the source or the target and I have not created any objects with this name in ODI. I can see that ODI is asking for this column when I execute the interface, but I don't know why. -
When Import get Error-00904 Invalid Column Name
Hi all,
I'm using DI Premium 3.0 with Oracle 10.2.0.1.0 repository. I'm trying to connect Oracle 8.1.4.7.1 (8i) but when i going to import tables get Error-00904 Invalid Column Name. If i connect to Oracle 10.2.0.4.0 don't get error.
Trying from DI XI R2 (11.7) with Oracle 10.2.0.2.0 repository, to connect Oracle 8.1.4.7.1 (8i) don´t get error!
Is error from Oracle repository version?
Thanks in advance.
JorgeHi Manoj,
This is the output:
SQL> desc all_tab_columns
Name Null? Type
OWNER NOT NULL VARCHAR2(30)
TABLE_NAME NOT NULL VARCHAR2(30)
COLUMN_NAME NOT NULL VARCHAR2(30)
DATA_TYPE VARCHAR2(106)
DATA_TYPE_MOD VARCHAR2(3)
DATA_TYPE_OWNER VARCHAR2(30)
DATA_LENGTH NOT NULL NUMBER
DATA_PRECISION NUMBER
DATA_SCALE NUMBER
NULLABLE VARCHAR2(1)
COLUMN_ID NOT NULL NUMBER
DEFAULT_LENGTH NUMBER
DATA_DEFAULT LONG
NUM_DISTINCT NUMBER
LOW_VALUE RAW(32)
HIGH_VALUE RAW(32)
DENSITY NUMBER
NUM_NULLS NUMBER
NUM_BUCKETS NUMBER
LAST_ANALYZED DATE
SAMPLE_SIZE NUMBER
CHARACTER_SET_NAME VARCHAR2(44)
CHAR_COL_DECL_LENGTH NUMBER
GLOBAL_STATS VARCHAR2(3)
USER_STATS VARCHAR2(3)
AVG_COL_LEN NUMBER
Thanks for your help.
Jorge -
Dimension processing failure - Invalid Column Name
Hello
I have copied our Account Dimension from Prod to Dev because we are testing 7.5MS.
I have Maintained Properties and modified dimension successfully.
But when I process i get the foll error :
- OLE DB error: OLE DB or ODBC error: Invalid column name 'ID13'.; 42S22; Invalid column name 'SEQ13'.; 42S22; Invalid column name 'YE_REF13'.; 42S22; Invalid column name 'SOLVEORDER13'.; 42S22; Invalid column name INPUT_SCHEDULE13'.; 42S22; Invalid column name 'ICMATCH13'.; 42S22; Invalid column name 'IC_SMRY13'.; 42S22; Invalid column name 'FORMULA13'.; 42S22; Invalid column name 'DRILLKEY13'.; 42S22; Invalid column name 'ALTECHUNUSED13'.; 42S22; Invalid column name 'ALTECHUNUSED12'.; 42S22; Invalid column name 'ALTECHUNUSED11'.; 42S22; Invalid column name 'ALTECHUNUSED10'.; 42S22; Invalid column name 'ALTECHUNUSED9'.; 42S22; Invalid column name 'ALTECHUNUSED8'.; 42S22; Invalid column name 'ALTECHUNUSED7'.; 42S22; Invalid column name 'ALTECHUNUSED6'.; 42S22; Invalid column name 'ALTECHUNUSED5'.; 42S22;
Invalid column name 'ALTECHUNUSED4'.; 42S22; Invalid column name 'ALTECHUNUSED3'.; 42S22; Invalid column name 'ALTECHUNUSED2'.; 42S22;
Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'AppSet', Name of 'Account' was being processed.
Server: The operation has been cancelled.
When I changed everything thing back to the old dimension it all works fine again.
Any help please?
Rgds
Perven
Edited by: Pervendren Naidoo on Jul 29, 2010 11:18 AM
Edited by: Pervendren Naidoo on Jul 29, 2010 11:18 AMIt seems to be something wrong into your dimension.
Check the member 42S22 especially regarding hiereachy.
Regards
Sorin Radulescu -
Hi .
I was creating the pass the values t in temp tables though s sis package vs2012 .
First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
exec USP_GETMP02333
go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
[Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help meArthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon. -
"Invalid column name 'DiscountPartNo'." during Items Synch
Hi everyone, I'm having the following error message on the items synchronization part.
Invalid column name 'DiscountPartNo'.
Invalid column name 'DiscountPartNo'.
at netpoint.api.data.DataFunctions.ExecuteReader(CommandType commandType, String SQL, IDataParameter[] parameters, String connectionstring)
at netpoint.api.catalog.NPPart.Fetch(String partNo, String catalogCode)
at netpoint.api.catalog.NPPart..ctor(String partNo, NPConnection conn)
at NetPoint.SynchSBO.SBOObjects.SBOItem.SBOToNetPoint(SBOQueueObject qData)
at NetPoint.SynchSBO.SynchObjectBase.Synch()
I'm working with WebTools 2007 PL06 and SAP 2007 PL15.
Running the synchronization process for the first time on this DB and it seems that I can't sort this problem alone.
It would be of great assistance if someone could help me on this one. Thanks in advance.Well I've double checked and the WebTools version is 626 (files versions 626 also) but It was a previous upgrade from 624 so what I did was Backup and uninstall everything, manually delete folders, DB, site, etc. then Install all over again with version 626 from scratch and it worked perfect!
So problem solved. Thanks Shane!
Maybe you are looking for
-
Error msg,please help :) "The item you tried to buy is no longer available"
Hi there, I am using a Macbook pro with Leopard with the newest version of iTunes. Many, many times when I have tried to purchase the newest episode of LOST, I click 'purchase' and type in my information and click 'yes', and for an instant it says 'p
-
Hard drive not recognized Power Mac G4 867mhz Quicksilver
I am using OS X 10.3 Panther to install. When I get to the "choose a location" prompt, there is no hard drive showing to select. I put a 120gb Seagate PATA HD in the unit. Maybe it just isn't Mac compatible? The original HD is long gone. Tha
-
Can't update Ios5 says I need 10.5 which I have..
So I try to update to IOS5 and every time I do a message pops up saying I need itunes 10.5(which i've already downloaded) and every time it checks for the update it says there are none and that I dont need to update anything. Yet every time I try to
-
Switching to mac, questions on best place to host reference masters
I am getting ready to switch from PC to Mac and have a question I am hoping I could get some advice on (I have a lot of questions actually, but will start with this one). I have a large library of photos and videos and plan on getting an imac for my
-
Exporting/Sharing Custom XMP metadata schema not possible?
I've written a Python script which automatically encodes Quicktime files which I've mastered out of Premiere Pro CC with embedded custom XMP metadata (created using "New Schema" in the Metadata Display panel). I'm using the embedded custom metadata t