Trying to Connect an Avaya 5610 VPN phone to a Cisco WRVS4400N VPN Router

I am trying to connect a VOIP VPN phone to a network that is hosted by a Cisco WRVS4400N Router running Firmware version 2.0.0.8
I do not need a tunnel as I want to be able to connect this phone from any remote location. But I need to be able to setup IPSec I believe.
The phone uss IKE parameters of DH2-3DES-ANY and IPSec Parameters od NOPFS-ANY-ANY.
Does the VPN Client Accounts support the above parameters?
I have tried setting the IKE to DH2-3DES-SHA1, and it did not work, and I tried DH?-ANY-ANY and IPSec of DH?-Null-ANY.
I see where people have got this phone to work with Netgear FVS314, and I figured this one sets up about the same as the Netgear.
Anyone ever do this with this router and phone? I would rather get this done witha $300 router versus an $1800 one.

The VPN Wizard, I believe is in the PDM menu... not sure since I don't use it.
SSH.....
ssh 0.0.0.0 0.0.0.0 outside
ssh 0.0.0.0 0.0.0.0 inside
Hope this helps,
JD

Similar Messages

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that.

TS2756 I'm trying to connect my ipad2 to my phones wifi hotspot. my phone says hotspot is activated and it shows up as an option on my ipad but when i hit that on the ipad it shows a page with a list of things like ip address, domain, url. what do i do no

I'm trying to connect my ipad2 to my phones wifi hotspot. my phone says hotspot is activated and it shows up as an option on my ipad but when i hit that on the ipad it shows a page with a list of things like ip address, domain, url. what do i do now?

iOS: Understanding Personal Hotspot
http://support.apple.com/kb/HT4517
Use Bluetooth to tether your iPhone, iPod touch, or iPad
http://www.macworld.com/article/1159258/bluetooth_tethering.html
How to Connect an iPad to an iPhone Via Bluetooth Tethering
http://techtips.salon.com/connect-ipad-iphone-via-bluetooth-tethering-25472.html
 Cheers, Tom

Tried to connect my messages from my phone to my macbook, but the accounts tab under preferences won't let me type in my Apple ID and I can't save, cancel, or exit out of the window

I just got a new MacBook Pro today. My friend explained to me how to connect my messaged from my phone to my Mac, since they weren't connected yet. I opened Messages > Preferences > Accounts. My Apple ID and account info was already there and it was enabled, but the messages still weren't syncing, so I disabled it and tried to add the account again. I went to put in my account info, but I realized there was no space to put in my Apple ID, even though it said to. I typed in my first and last name, password and country, but when I clicked "save" nothing happened. The section that asked my ID, name and password disappeared, the "save" button keeps flashing, and I can't "cancel" or exit out of the window. If I press "cancel", an alert message appears but all it says is "(null)". How can I fix this so that I can exit out of it? It won't let me shut down because of this.

It will only sync with new messages received after Mac's Messages is configured and running.
It will not synced old messages.

Trying to connect HP officejet all-in-one! assitant does not support router??

I am trying to connect HPOfficejet 7410 All-in-One which is wirless enabled to my wireless netowork. Getting message," HP NETWORK ASSISTANT does not currently support the router that is connected to your system." Does this mean that I cannot setup this printer with the router I have? Or is there another way I can connect it without using the Network assistant? The router I have is a Linksys Router Model # WRT110 . I have tried to find another router that was in the list of "supported routers" with no luck. I have looked everywhere. Please if someone could help! Let me know if you need more info to answer my question. Thanks!

Actually, its not that the youre router is not ocompatible with the HP Network Assistant. Maybe yuore router has a very secure network security thats why the wireless assistant could not connect the printer to youre router
- The other way to connect the printer to your wireless network is to run the wireless setup wizard on the printer.
- Step 1. Press the set up button on the printer and press the right arrow then navigate & look for netwok menu then press ok.
- Step 2. press the right arrow and look for wireless setup wizard
- it will look for youre wireless router and try to select your router the enter the security key(WEP or WPA) if you have one.
- after that it will prompt you that the printer is connected to your network
REGARDs --- 1234 --

Confused how to set-up a PC & laptop with Cisco WRVS4400N VPN for home use

Just bought a new PC and laptop and was recommended by (CDW) to use a Cisco WRVS4400N to set up the VPN.
For home use, only the PC and laptop, both running Windows 7. I use Comcast as my ISP.
The mountains of docs confuses me to no end, can anyone simplify this for me. I look at all the details and do not know where to start.
In short,
(1) configure router to recognize my PC and Comcast, and I guess the laptop.
(2) configure laptop to go wireless and communicate with PC.
Any assistance would be much appreciated.
Thanks,
Terry

For a very small office and a minimum of admin and tech know how, one approach i'd suggest is to not worry about user id collisions at all. any time anyone wants to use a mac you just set them up as a user, using consistent names/passwords.
Have a "Work" volume on each mac that has "ignore ownership on this volume" ticked. that way UID collisions aren't important.
You can make a Desktop folder on the Work volume and make a SYMBOLIC LINK from every user's home that replaces their desktop with the desktop folder on the Work volume.
Make it known that the user's home is for personal stuff ONLY, and the Work volume (inc the desktop) is where work in progress lives.
At a later date with some confidence in your network and your admin skills you could impose consistent UIDs using an OD master

Hotsync trying to connect and eventually shutting my phone down

In less than a year, I have had a Palm Centro and a Palm 680. Both phones suddenly started Hotsyncing without me prompting them to do so. My wife liked her centro so well that we decided to just replace it with the 680, and within two months the same thing happened. Is there something I am missing here? The phones were purchased primarily for the texting features, we do not use the phone for internet... just to talk ad text. Also, we didn't connect the hotsync whatsoever, until the second one started the same problem. We have tried the soft reset and hard reset to no avail. Can someone offer some advice or are both my phones trash???
Post relates to: Treo 680 (AT&T)

Hello randy728.
While I have no definite answer as to what is wrong with the phones, I can tell you that we know for a fact many phones that begin to exhibit the behavior you describe have gotten wet at the HotSync port on the bottom of the device.
When a certain two of the gold connectors get shorted together, it is like pressing the HotSync button on the cable that comes with the device. I'd look for some evidence of this happening, and if any corrosion or other gunk is present remove the battery and clean the port with either "Contact Cleaner" (available from electronic stores) or isopropyl alcohol and a q-tip.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Desperate! Trying to connect E2 with LG VX8300 phone

I have a Tungsten E2. Love it except I can't get it to find the Bluetooth connection to my phone. Very frustrating. My phone is an LG VX8300. Looks like my phone recognized the Tungsten device, but the E2 does not have that phone under it's device list. I think I ran the phonelink updater from the palm folder, but nothing changed. The whole phone connection was a major reason I got the E2. Please help, anyone?
Post relates to: Tungsten E2
Message Edited by smkranz on 07-21-2008 12:37 PM

Hi, and welcome to the Palm Community Forums.
I see from doing a bit of Google that your phone is probably a Verizon device? If so, that is probably 95% of the problem. Verizon limits the Bluetooth capabilities of its phones to basically connecting with a wireless headset or earpiece. No file transfers, and so far as experienced users here and elsewhere can attest, no sharing the phone's wireless internet connection for online activities with your E2.
If connectivity with your E2 is important, your best (probably only) option is to switch carriers...AT&T for instance. I can't speak to other carriers as I have no experience with them.
[Oh, and I hope you don't mind that I edited the Message Subject to make it more descriptive of your problem.]
Post relates to: Centro (AT&T)
Message Edited by smkranz on 07-21-2008 12:46 PM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

HT1430 I am trying to connect to itunes as my phones says it is disabled, but itunes says to enter password as phone is locked. How do I get the phone to reset as I do not know password?

My phone is saying iphone is disabled, connect to itunes. When I do this, itunes says the phone is locked and I need to enter the password. I do not know the password and it will not give me any other screen, other than the one that says iphone is disabled, connect to itunes. What do I do to reset.

If they were songs you purchased from itunes, try redownloading them from your purchases...
if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library

Will Nortel's Contivity VPN Client work with Cisco's VPN 3000 concentrator?

Hi, need help. We have VPN 3000 concentrator and a number of VPN clients (these are using Cisco VPN client).
We have one user that wants to use Nortel's Contivity VPN Client. Will this work with the Cisco COncentrator 3000?

Tricky question - in theory yes, if the nortel client follows all the ISPEC RFC's.
I did try to get the cisco VPN client working on a Nortel Contivity once - did not get it working - but did'nt have that much time to test and get it working.
My advise - Configure, TEST DEBUG TEST DEBUG!

TS1398 My i-phone model MD654LL/A serial F17JWNAF8H2 says "Unable to join the network "sunday". This is my WIFI network I have had for years. My I pad has no problem connecting, but not my i-phone. I just tried my daughter's i-phone and it has same pro

My i-phone cannot connect to my wi fi-all of a suddon. My wife's i-phone 4 is connected to the wi-fi network.
I just tried to connect my daughter's i-phone 5, and could not connect message came up "unable to join the network "Sunday".
My I-pad is connected to Sunday also.
I tried the reset routine, and when I try to get on line, it asks for my password. I put it in and it stll says unable to hoin message.
Can someone help?

Reset your network settings. Settings>General>Reset>Reset Network Settings

I Have Spent (No Kidding) About 20 Hours Trying to Connect WRT54GS

I am trying to connect my new wireless laptop (HP Pavilion dv6985se) to your WRT54GS router. I have DSL internet with Verizon over a dedicated line. My modem is a Westell model E90-810015-06. Your instructions show the router being plugged into a PC tower, which I do not own. No matter how many, many, many times I go through the steps for installing the router, I always end up with the router attached to my laptop- not wireless. There is no way for me to connect the modem to the router using two cables as your instructions show. My modem only has the ethernet outlet and a usb outlet (which I don't have a cable for because I didn't need it). I should not have to buy a flash drive to make this work. At least that's what HP says. When I connect the modem to the router, I get an error message on my monitor saying I am no longer connected to the internet and I should check my connections. The ethernet light never comes on on the router. I never get past step 4/4 (waiting for router). At this point, the process freezes, and I have to use Task Manager to end the program. At the end of it all my computer 1) can't find the router 2) Is disconnected from the internet 3) Can't locate a wireless connection. I am so ready to throw this in the trash and never buy Linksys again. I have been to a bazillion websites, and many, many people are having similar problems.

First, do not use the setup CD (Easylink Advisor) as it does not work.
Go here if you have a cable connection.
Go here if you have DSL connection.
Go here for your wireless connection.

Getting an error message when trying to connect to Telepresence Meeting - "Call Denied"

I am getting an error when trying to connect to Telepresence units I have been using for quite some time. I tried multiple computers and multiple destinations. The error message "call denied" pops up within seconds after trying to connect.
Any ideas? Is this a Cisco related issue?

I can't dial: (Get 'call denied' message)
[email protected]
[email protected]
[email protected]
Is there a way to know this is being addressed? How would one start a support case on this subscription service?
Although I subscribe for service for my SX20's and Bridge, my jabber video account is a free account.
Update: At 1pm CT I am able to dial and connect.

I am trying to connect my E1000 to my Directv DVR

I am trying to connect my E1000 to my Directv DVR and it isnt working. I have internet but can not get it to connect to the

Are you trying to connect to the wireless network or it is wired to the router?
Do you get IP address on DVR system?
How many wired and wireless computers/devices do you have in the network?
If the Internet is working fine on all the other computers/devices then I think your router is working fine.
If it is wireless system then you just need to connect to the wireless network. Make sure that you are entering the correct password of the wireless network.

AnyConnect for Cisco VPN Phone demo license

I want to test VPN Phone in the ASA5520,but "show ver" find the "AnyConnect for Cisco VPN Phone : Disabled", www.cisco.com/go/license i didn't find register AnyConnect for Cisco VPN Phone demo license, how to apply for the demo license??
Licensed features for this platform:
Maximum Physical Interfaces    : Unlimited
Maximum VLANs                  : 150
Inside Hosts                   : Unlimited
Failover                       : Active/Active
VPN-DES                        : Enabled
VPN-3DES-AES                   : Enabled
Security Contexts              : 2
GTP/GPRS                       : Disabled
SSL VPN Peers                  : 2
Total VPN Peers                : 750
Shared License                 : Disabled
AnyConnect for Mobile          : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials          : Disabled
Advanced Endpoint Assessment   : Disabled
UC Phone Proxy Sessions        : 2
Total UC Proxy Sessions        : 2
Botnet Traffic Filter          : Disabled
This platform has an ASA 5520 VPN Plus license.

Hi there,
Did you try
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=717
Cheers!
Rob
"Why not help one another on the way" - Bob Marley

Trying to Connect an Avaya 5610 VPN phone to a Cisco WRVS4400N VPN Router

Similar Messages

Maybe you are looking for