Trying to Export - Quicktime to DPX - in Linear (R709) Color space NOT LOG

Hello,
I am trying to export an image sequence through compressor from a Linear (R709) color space. When I try to do the dpx image sequence output it changes the files to LOG.
Is there a way to pass the material through without any color space changes?
Thank-you,
Carl

FYI, In the Inspector, and filtes, COLOR tab> Output Color Space: Default for Encoder (CAN NOT BE CHANGED - It is greyed out)

Similar Messages

Trying to export QuickTime but only the first 30 seconds exports

I'm trying to export my 3 minute long project using QuickTime conversion but only the first 30 seconds of the sequence exports. How do I get the full video to export?

If you're trying to export it to WMA or WMV, you need to purchase a version of Flip4Mac which includes that capability. QuickTime cannot create files in those formats without third-party software which provides the necessary engine; even though it appears that QuickTime is doing the conversion, it's not.
(43184)

Newbie CS6 Trying to export Quicktime h.264

I am new at exporting. When I use the h264 format and it's maximum quality it's a 55 MB file.
When I use the customized Quicktime and then h264, my file is only maxed at 8MB.
I'm trying to figure out how to maximize the size of this :30 commercial for air.
All help is great appreciated. Thanks in advance.

Yes. Quicktime, at h264.
I was able to manage 89MB file using all of the best quality improvement enhancements I could figure out.
They tell me though their typicall :30 commercial at quicktime h264 is usually about 250MB

When trying to export data from a program we use, it does not automatically recognize the file format as .xml. Does anyone know what I can do to fix this problem?

I have tried to uninstall verion 3.6 and reinstall. Also, I re-imaged the workstation, but it still does not work. The OS is Windows 7 32-bit. This same process works automatically on an XP workstation. In fact, the machine I re-imaged was an XP box, but it did not work on this particular machine. Hence, the reason for the new image.

I am exporting the file from TxEIS (in the Firefox web browser) and it does not download properly. Acccording to Firefox documentation, it is supposed to automatically recognize the file extension. I have not experienced this on any other machine within our environment. Other users are performing this same process with no problems. The browers settings are exactly the same as the machines that are working right.

Export Quicktime with Audio - timings to advance slides -does not work

Mac OS 10.6.1
iMac 27" 4 GB 1067 MHZ
Keynote 09 - 5.03
I opened a .ppt
I added an windows media file after getting it into GarageBand - so a GarageBand file actually
I timed the slides - this does not work either as a side remark - you can not just enter seconds there - they disappear - you need to use the arrows
If I test the slideshow, it runs nice in Keynote.
If I export it to Quicktime, the sound works, the slides do not advance.
(I think I had it once working before I moved my files to my new Mac)
Help please
nico

I'm just posting this as a general discovery....
I too have had many many frustrations with creating a slide show with audio clips linked to individual slides and a soundtrack music background. Of course this records fine and plays back fine in KN. The problem lies in any form of sharing/exporting. The audio either disappears or the timing goes nutty.
What I discovered was....During a manual recording in which I advance the slides and the builds within the slides, the tap of the space bar directly correlates to when the audio would stop in the exported version. ie. Slide one, audio set to start automatically after transistion, text has no builds, Slide 2, audio set to start automatically, text builds with each bullet. In the exported version the second I hit the space bar to create the first build during the recording, is where the audio is cut off in the exported version.
Therefore, if I go through each and every slide and set the timing for each and every build, transition, etc. , then record the slideshow so that I never have to hit the space bar to create builds (transitions to next slide seems to be fine) my exported recording seems to play back without problems. This is very tedious but seems to work (so far).
I hope I have explained my findings clearly. I also hope that this is somewhat helpful to the rest of the world

Trying to export my document as a SWF file but its not letting me...

Hi,
I have a document (brochure) that i have created in indesign cs5. I wanted to make it interactive, only in that you can turn the pages as you are viewing it online. So I have done this and added the page transitions, but when I go to export it, it doesn't give me the option of a SWF file...
Im not sure why this is or what im doing wrong here!?
Any help on this much appreciated!
Or perhaps a link to a post that already explains this, I cant find any info on it though.
Thanks!

Here is an example of what I am trying to create... this brochure shows only the front cover as a single page, same with the back cover...
http://www.thebeardmore.com/conference-brochure/
my document is adding a extra white page next to the front and back cover changing them into spreads...
C:\Users\RBrown\Desktop\1.html
I have read an srticle which says you cant do anything about this... but then how has it been achieved in the example I have found online above?!
Can anyone help me with this please?!?!

Trouble exporting Quicktimes from Avid Express Pro?

Hello! I'm operating Avid Express Pro version 4.3.0 on a G5 Mac OS 10.3.9 and I recently upgraded to QuickTime 7.1.5. I can no longer export quicktimes from Avid Express Pro because it is not compatible with this version of Quicktime. It's only compatible with QT 6.5.2. I've tried to use the reinstaller 6.5.2 and it doesn't work as it cannot seem to find 6.5.2 on my system. I now can't load 6.5.2 as I already have a higher version of quicktime on my system. I've tried deleting QuickTime files and starting from scratch and did delete a few items, but dragged the majority back into my computer from the trash as I realized I didn't know what I was doing and which 3rd party programs also utilized QuickTime.
If I wish to reinstall QuickTime 6.5.2 but the reinstaller won't work, what would you recommend?
HUGE thanks!
Mac G5 Mac OS X (10.3.9) Avid Express Pro 4.3.0

Not sure that anyone in the iPod Nano forum can help you. You might try searching/posting in the Quicktime Forum
http://discussions.apple.com/category.jspa?categoryID=122

Export Quicktime from a DVC Pro HD 720p60 Project

I've read the discussions and am still looking for some solid answers on this and /or confirmation that I've done it correctly.
I'm working in a DVC Pro HD 720p60 project
Sequence setting frame size is 960x720
(no I don't know what it was shot on)
The cuts are :30 spots and I'm looking to do 2 things for my producer.
1) export the spots so that he can compress them as desired for his reel on his website, for which I've done the following:
File - Export - Quicktime Conversion - Settings, H.264, size 1920x1080
Is this the best way to do this?
2) export the spots so that he can add them to his reel when he wants to on dvd, for which I've done the following:
I created a new DV50 project and cut the spots into them.
File - Export - Quicktime Movie - Current Settings
I also tried:
File - Export - Quicktime Conversion - Settings, H.264
The strange thing was that the H.264 on this looked better than the quicktime movie.
Any thoughts? Much appreciated!

Well, if you need to get it to the web guy to compress as he sees fit, then you will need to provide him with...well, what he wants. You need to ask him (her) what they want you to give to them.
And the dimensions would be 1280x720. 960x720 is squeezed anamorphically. and going to 1920x1080 is makig it bigger than the original.
As for the H.264 for DVD. Compressing it like that, then compressing again for DVD...icky. It looks better? Well then, maybe it darkened or brightened the footage as it compressed it. You might consider color correcting your main footage if you like that look.
And you weren't in a DV or DVCPRO 50 project, you were in a DVCPRO HD project. Why cut it in a one of those settings? it won't look any better, in fact, it will look worse. And compressing it for DVD ro the web wouldn't be any easier. Sorry, I guess I don't understand your reasoning here.
DV 50 isn't what it was shot nor edited at. It is DVCPRO HD...DVCPRO 100. Export self contained using sequence settings and it is EXACTLY the same quality as the original footage in the timeline.
Shane

Photoshop not seeing export color space setting in Lightroom 4

MY LR or PS programs are not acting as expected.
When my Lightroom 4 is set to export to Photoshop in either the sRGB color space or the AdobeRGB color space, and Photoshop is set for the sRGB space, Photoshop gives a color mismatch error in both cases, saying the image is an AdobeRGB embedded image. However, if the color space in PS is set for AdobeRGB, even if the export setting in Lightroom is sRGB, there is no mismatch error.
Apparently, PS sees every image as embedded with AdobeRGB.
I have a Sony NEX6 camera. I have taken pictures in the camera sRGB color space and the AdobeRGB space, which I used for this test. Since I shoot in RAW, this should not matter, so I don’t think it is the issue, and, in fact, I get the same result no matter which color space the camera is in.
If LR export and PS color space are the same, why should there be a mismatch, and why is PS not seeing the sRGB space? Might there be a setting in Lightroom or Photoshop that I am missing?

howdego wrote:
I am, however, trying to decide on the right color space to use, which is how I noticed this problem. I rarely make prints of my photos. I make bluray movies using Proshow Producer. I recently got a new monitor and Samsung LED HDTV, and found that my photo videos did not display right and I am trying to find out why. I found the normal viewing settings of the TV have too much color and sharpness, so I established another group of settings for photos, which helped. However, I am still not satisfied.
These are two separate but related issues.
1) It's almost impossible to get accurate Color and Luminance level rendering inside LR if you don't use a hardware monitor calibrator to adjust your computer monitor.
2) LCD TV's use settings to "enhance" color, brightness, and contrast that is usually very, very inacuuarte. But this is what most non-photography people seem to like so TV manufacturers crank up the "default settings." I also have an older 52" Samsung TV (LN-T5265F) that I've manually adjusted for more accurate color. Try using the 'Movie' mode, which is the most accurate mode and turn the Backlight setting down. Here are the settings I use with my Samsung TV. I assume your Samsung TV's controls are similar:
Setup Screens
HDMI 1 (Cable Box) & Coax (Cable)
HDMI 2 (Panasonic Blu-Ray Player)
PICTURE - 1
Movie
Standard
Dynamic
Movie
Standard
Dynamic
Contrast
82
82
82
82
82
82
Brightness
43
45
45
43
45
45
Sharpness
25
25
35
15
15
25
Color
42
45
45
44
45
45
Tint
77 R
77 R
84 R
77 R
77 R
84 R
Backlight
5
6
7
5
5
6
PICTURE - 2
Color Tone
Normal
Normal
Normal
Normal
Normal
Normal
Detailed Settings
Black Adjust
Off
NA
NA
Off
NA
NA
Dynamic Contrast
Low
NA
NA
Low
NA
NA
Gamma
-1
NA
NA
-1
NA
NA
Color Space
Auto
NA
NA
Auto
NA
NA
White Balance
R-Offset
13
NA
NA
13
NA
NA
G-Offset
15
NA
NA
15
NA
NA
B-Offset
17
NA
NA
17
NA
NA
R-Gain
15
NA
NA
15
NA
NA
G-Gain
12
NA
NA
12
NA
NA
B-Gain
17
NA
NA
17
NA
NA
My Color Control
Pink
15
NA
NA
15
NA
NA
Green
15
NA
NA
15
NA
NA
Blue
15
NA
NA
15
NA
NA
White
15
NA
NA
15
NA
NA
Edge Ehnacement
On
NA
NA
On
NA
NA
xvYCC
Off
NA
NA
Off
NA
NA
Digital NR
Low
Low
Low
Low
Low
Low
Active Color
Off(NA)
Off(NA)
Off
Off(NA)
Off(NA)
Off
Dnie
Off(NA)
Off
Off
Off(NA)
Off
Off
SETUP - Screen 2
Energy Saving
Off
Off
Off
Off
Off
Off
SETUP - Screen 3
HDMI Black Level
Low
Low
Low
Low
Low
Low
Film Mode
Off(NA)
Off(NA)
Off(NA)
Off(NA)
Off(NA)
Off(NA)
howdego wrote:
So it occurred to me that some colors might be wrong, or too saturated, because I am not seeing them on my monitor as they will appear on the HDTV. I am thinking that since sRGB is my final color space, I would try to do everything in the sRGB space, including setting my monitor to sRGB (I have a Dell 2413 which supports adobeRGB too). I was inn the process of trying this when I found the issue at hand. Might you have any thoughts about this color space choice
If you have a wide-gamut monitor you are better off using it in Adobe RGB mode with a monitor calibrator. But then the monitor will not look correct in non-color managed applications:
http://www.gballard.net/photoshop/srgb_wide_gamut.html
You can circumvent this issue by using your monitor in sRGB mode, but I'd still suggest you use a hardware monitor calibrator. Either way it is imortatnt that you have a proper monitor profile assigned in Windows or OS X Color Management. The monitor manufacturer provides these, but they don't always work well with LR for numerous reasons.
To insure the best image quality you should do all of your editing in PS using 16 bit TIFF with ProPhoto RGB profile format until you are ready to Export. For use with ProShow you can use TIFFs or JPEGs, but use sRGB color profile to avoid any color management issue. JPEGs are fine and a LR Quality higher than 80 (10 in PS) is a waste of disk space for slideshow images.
In short you've got a lot of "variables" between the uncalibrated monitor and out-of-the-box non-adjusted TV. The former requires a good hardware calibrator aad the latter a good "eye" to adjust it.

Export an image from flash, the output color not same as original from flash

i try to create my logo from flash
i use export function in gif format.
the output color is not same as what i saw at flash.
may i know why? below is the screenshot.
flash
output

hi
i have export in png. but it have a black part at the background.
do you have idea?

Media Encoder CC2014.2 crash on windows when trying to export when quicktime is installed

Hi,
I'm trying to export .mov files (created on random Mac computers in very hi-res) to reduce file size, and have the same output format. (possibly 1080p H.264-> .mp4)
I installed Media Encoder cc2014.2 on my pc (win7, 64bits, french).
When I first tested, Only the audio was being exported. But I soon realized I didn't had the proper codec installed on my PC.
(I wasn't able to play the original video file, only the audio was playing).
So, like a good boy I installed Apple Quicktime (7.76.80.95)
With quicktime on my PC I was able to play the original video file. (with quicktime player)
So I opened Media Encoder again, and on the preview this time I can see the video with the sound. But as soon as I start the coding (the little green arrow) Adobe Media Encoder crash.
I have tried multiple output format, it always crash right when I start exporting the file.
I uninstalled Quicktime, and media encoder is working again ... but my original files (.mov) can't be exported with video, only the sound.
I have tried a third party codec (K-Lite), I can see the video+sound on my pc, but Media Encoder is still blind, no video, only the sound.
Is there a way to add codec to Media encoder without having to install Quicktime?
Or a way to make Media Encoder work on my PC when Quicktime is installed?
btw I'm sorry if my text is a bit confusing, I'm french speaking
Thank's in advance!

The Error is back!!!
Yesterday it worked today it crashes when I export from premiere via media encoder. I tried it with all the things you told me:
1. Bars+Tone => export => crash
2. Video Project with 2 short h264-files => export => crash
3. Software only renderer => crash
These are the two logs that I found:
Ereignis-ID 1000
Die Leistungsindikatoren für den Dienst WmiApRpl (WmiApRpl) wurden erfolgreich geladen. Die Eintragsdaten im Datenbereich enthalten die neuen Indexwerte, die diesem Dienst zugeordnet sind.
System
Provider
[ Name]
Microsoft-Windows-LoadPerf
[ Guid]
{122EE297-BB47-41AE-B265-1CA8D1886D40}
EventID
1000
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-04-16T08:25:51.922502600Z
EventRecordID
3402
Correlation
Execution
[ ProcessID]
19984
[ ThreadID]
24964
Channel
Application
Computer
Schnittplatz
Security
[ UserID]
S-1-5-18
UserData
EventXML
param1
WmiApRpl
param2
WmiApRpl
binaryDataSize
16
binaryData
38270000DE27000039270000DF270000
So it would be great if you have any idea what to do...

Quicktime Pro exports white screen when trying to export to iPod or DV

I'm recording video on a "Flip" video camcorder which plays back great in Quicktime but when I try to convert the files to either DV so I can edit them in iMovie, or convert them so I can watch them on my iPod, I end up with sound but no picture, just a white screen. I've tried some other QT video from other sources and have the same results so I'm guessing that it is not the camera. I thought it might be my settings to I tried other "Export To" settings but I always end up with a white screen. Any suggestions?
Thank you!
George
Apple Lover since my Apple IIe.

Add (free) Perian and use (free) MPEG Streamclip to open and export to QT.

Trying to export movie from QuickTime Pro to AVI and getting white screen

Hi there,
I am trying to export a movie from QuickTime Pro to an an AVI file. It goes through the process as if everything has worked, but when I open the finished file, all I get is a white screen with no audio or picture.
I need to save lectures from school from the school website to my computer so that I can watch them when I do not have internet access. QuickTime gives me the option to save the video straight from the web, but as soon as I turn off my AirPort it tells me that I need internet to continue watching the movie..
I need some way to get the files to my computer. Any suggestions?

I am trying to export a movie from QuickTime Pro to an an AVI file
AVI is just a container ... specifically, which codec are you using when exporting? And why export to AVI?
QuickTime gives me the option to save the video straight from the web, but as soon as I turn off my AirPort it tells me that I need internet to continue watching the movie
That usually means that your system doesn't have the codec installed needed to view the video, but your web browser is using a plugin that does. What format are the web videos? Flash?
-DH

Trying to Export to Quicktime Movie.

I have tried several times to export to Quicktime but nothing
happens. The progress bar shows Recording movie and then freezes. I
have tried renaming the file in a different name as I heard there
were issues with this, but still no joy. Can anyone help me
pleaseeee!

I am trying to export a movie from QuickTime Pro to an an AVI file
AVI is just a container ... specifically, which codec are you using when exporting? And why export to AVI?
QuickTime gives me the option to save the video straight from the web, but as soon as I turn off my AirPort it tells me that I need internet to continue watching the movie
That usually means that your system doesn't have the codec installed needed to view the video, but your web browser is using a plugin that does. What format are the web videos? Flash?
-DH

Trying to Export with new codec freezes Quicktime pro 7.6.6

I have just updated Quicktime pro to version 7.6.6 and I am trying to export a .m4v to .mov to bring into FCP. I have done this a thousand times in the past with no problem. Now, however, when I click on File>Export>Options>Settings...the program freezes until I am forced to force quit. I have done this 7 times in a row with the same result. I have version 7.6.4 on my laptop and everything is working just fine. Anyone else having this issue...should I try to revert to my old QT (and how could I)? Any insight would be great. I have a project due soon and would love to convert the necessary files I need to finish! Thanks in advance for any and all help!

Christopher,
You are not alone:
http://discussions.apple.com/thread.jspa?threadID=2413966&tstart=30
and
http://discussions.apple.com/thread.jspa?threadID=2418560&tstart=30
I hope this get recognized and resolved soon.
Jonathan

Trying to Export - Quicktime to DPX - in Linear (R709) Color space NOT LOG

Similar Messages

Maybe you are looking for