Trying to figure out difference between Access Point & Gateway
Hello All,
I am trying to figure out how to expand my home network and getting confused by the terms. The following is what I have for equipment"
WRT 130N
WRT 54GS
4 hard wired assorted items hard wired to the 130N
Here is what I want to do and not sure if I can do it:
I would like to use the wireless side of the 54GS to connect to the wireless side of the 130N. By [lacing the 54GS on a different floor of our home we will have four more hard wire ports to utilize for addition hardware we want to network.
My questions are as follows:
Is there a way that using the firmware in the 130N & 54GS to do this> The 54GS is V.7 and the 130N is only about six months old so it's the most current firmware. I am completely confused as to what the difference is between a gateway and an access point.
Today was spent reading everything on the net about after market upgrades and in the end I am only more confused.
Can anyone offer me some advise or guidance?
Thanks,
Ted
access point:
A device that allows wireless-equipped computers and other devices to communicate with a wired network. Also used to expand the range of a wireless network.
gateway:
A device that interconnects networks with different, incompatible communications protocols
Analyzing the network environment that you want to create, is it?
1. wrt130N ))))) ((((( wrt54gs )))) ((((( 4 devices
2. wrt130N ))))) ((((( wrt54gs ----------------------------------------- 4 devices
If it is figure 1. it is not possible, neither figure 2. to get it working that way, because wireless routers can only function as a wireless router, wired router and an access point.
What you can do though is :
wrt54gs- at least fw: 7.50.5 )))))) ((((( wap54g - in repeater mode - )))))) (((((( pc
wrt54gs- at least fw: 7.50.5 )))))) ((((( wap54g - access point client mode- wrt130n - dhcp disabled --------------------- 4 devices
Take note though that wrt54gs has not been know to work with wpa54g access access point client mode
Your best bet is to just wire wrt130n to wrt54gs and change the ip address of the latter to i.e. 192.168.5.1.
" I can do all things through Christ which strengthens me. "
Similar Messages
-
Difference between "access point solution" and "hot spot solution"
Hi to all, i'm Fabio.
My customer has a bookshop and wants to allow to his customers access to the internet using wifi connection.
Here in Italy there are a lot of laws and is very hard to create this type of solution without legal permission, authorization and so on.
However, i'm reading some technical website, and lot of them propose solution based on hot spot and not access point.
Now my question my doubts:
-Is there some difference (technical and "conceptual") between hot spot and access point?
-How are the law outside Italy, in order to satisfy this type of request?
You have to think that here, based on the Italy rules, my customer should become a telecommunication operator to allow him to install ten access point for public use!!!!!!!!
Thanks, Fabio Marino.Ok Surendrea, in this case i post here what you have to translate from my link
(source: http://www.cdaweb.it/Articoli_Vista/tabid/94/articleid/305/Default.aspx?dnnprintmode=true&mid=421&SkinSrc=[G]Skins%2F_default%2FNo+Skin&ContainerSrc=[G]Containers%2F_default%2FNo+Container):
"Quali soluzioni tecnologiche possono essere adottate per tutelarsi in questo senso? Una esaustiva risposta a tale domanda viene data in questo articolo di 01Net.it. Possiamo sintetizzarne i concetti. I gestori dovrebbero preferire soluzioni di tipo hotspot, invece che access point. Questi ultimi infatti hanno la funzionalità basilare di diffusione del segnale, senza però poter tracciare l'autore di eventuali attività illecite, in quanto non esiste distinzione tra gli utenti collegati e non rimane traccia del traffico prodotto. Gli hotspot, invece, permettono di far autenticare con username e password univoci ciascun utente, e quindi rintracciarlo in caso di necessità, gestire ticket di navigazione, gestire la banda in modo che un singolo utente non la monopolizzi rallentando o intasando la navigazione altrui, separare la rete personale/aziendale da quella del Wi-Fi pubblico, e mantenere traccia di tutto il traffico attraverso i file di log (i registri degli accessi). Ecco la soluzione ideale che consente all'esercente di dimostrare di non essere l'autore di attività illecite."
English version:
"What technological solutions can be adopted to protect themselves in this way? An exhaustive answer to this question is given in this article 01Net.it. We can summarize the concepts. managers should prefer solutions like hotspots, rather than access point. These in fact have the basic functionality of spreading the signal, without being able to trace the perpetrators of any illegal activities, as there is no distinction between connected users, and no trace of the traffic generated. hotspots, however, allow to authenticate with username and passwords each user, and then track it down if needed, manage navigation tickets, manage bandwidth so that a single user does not monopolize the slowing or clogging the navigation of another, separate network and personal business than that of Wi-Fi public, and keep track of all traffic through the log files (access logs). This is the perfect solution that allows operator to demonstrate that it is not the author of any illegal activity."
May be based on this information you can learn something new -
Trying to figure out how to change the tuning of certain notes so I can play notes in between pitches for example the middle note between B & C or E & F. I can use different tracks if needed but I would prefer to know how to do it for individual notes as well. They have to be exactly in the middle so it's not out of tune.
Danny,
The theme to Doctor Who is in 12/8. In music theory, there's no such thing as a 12th note, the notation and nomenclature is all based on things being divisible by four. So for the diddly-dum feel to happen, you have to give the beat to a quarter note plus another eighth note -- we call it a dotted quarter note, and now you have three eighth notes per beat so you can go diddly. So, since you can't call the time signature 12/dotted quarter, you call it 12/8 and go faster. Make sense? Anyway, for GB's purposes, all you need to know is that you'll get that feel by choosing 12/8. -
Need help- trying to figure out if Spotify would work for my senior living community
We are a senior community that has activity programs running in like 7-10 areas in the building. Music is a big part of our day. CD's for all these areas is getting crazy. There has got to be a better way. We want to be able to pick music genre, a song even to hear and have playlists. What we have currently: We have some laptops and desktop computer using windows. We also have a few MP3 players, boomboxes and IPODS. We also have Wifi. But sometimes of course we have Wifi issues. We have access to usually a laptop or boombox. We could use the MP3 players/ipods. I like the idea of playlists that we share, pulling music that is alike. These are my quesitons or issues below: Things are my questions:1. Can we have 1 account be made for different appliances and be on spotify at the same time? Premium said 3 but you can't be both logged in under each account. Is this still true? Postings were old. 2. With even the Spotify family can you be on to the account at the same time? 3. What would be our best solution for this for accounts- would we have to set up different account for each device if we want to play at the same time? Any ideas - I just really need suggestions4. If we did our laptops, we would need speakers? Also for boomboxes- is this possible? I am assuming using like an MP3 player or IPOD. Spotify work through them? Is it certain type of MP3 players and IPODS. I believe a few of ours are older ones. 5. If we have tons of accounts, can I start all accounts on same computer? Would I set them up by each device we have?6. Can you run ipod/mp3 through large TV speakers? or laptop music through big screen tv speakers?7. For the music itself, can you pick what exact songs in playlist? Can you make lots of playlist per account? I saw 3,300 songs but can you name the playlist and stay forever? Sorry for all the questions. I am trying to figure out if this is even possible or worth doing. If we have seperate accounts - how much monthly is that? Is there a deal for that many devices? Thanks
Spotify has 2 different account types. You can see the difference between the two at the bottom of the homepage: http://spotify.com
1: Each Spotify account can only play on one device at a time. You can have the account logged into as many devices as you want, but you can only play on one device at a time.
2: With Spotify family, there are several Spotify accounts under one plan. Each account is able to play on one device at a time.
Check out the family help guide here:
https://support.spotify.com/learn-more/guides/#!/article/spotify-family
Also check out this thread for information:
https://community.spotify.com/t5/Help-Accounts-and-Subscriptions/Spotify-Family-Q-amp-A/td-p/988520
3: Yes, as stated above
4: You wouldn't necessarily have to have speakers hooked up to the laptop. If the laptop has speakers or you input headphones, that should work. Spotify doesn't work with MP3 players/iPods. To use Spotify you have to have the Spotify app.
You can find a list of compatible devices here:
https://support.spotify.com/learn-more/guides/#!/article/spotify-system-requirements
7: Yes you can search Spotify and add any song you want to a playlist. And you can also make lots of playlists. Each playlist has a limit of 10,000 songs. The 3,333 limit you saw is for the offline limit on premium accounts. Up to 3,333 songs can be downloaded for offline listening.
Hopefully this information helps. The family plan can have up to 5 accounts. It might end up being too expensive for what you need. The free plan has ads, but it still might be worth looking into.
-
I am trying to figure out how to merge my AD network account.
I am trying to figure out how to merge my AD network account with my Mac account. The main reason for this is wanting to log into my admin account on the Mac, and have it also log into my network account so I do not have to log into differing accounts depending on wether I am on the network or not. And I am going to be running VMware fusion with windows on top, so having one account would be essential to this.
Thanks.
P.S. I am brand new to Apple, not by choice. ;-)Basically I want to link a network account to a local account, so that I always log into the same account, even if I do not have network access....
-
Lumia 920: Still trying to figure out what the pro...
Aside from being very upset about Nokia's not allowing updates for the unbranded 920s, I'm still trying to figure out what the problem is with my camera...
I had nearly a perfect working phone one and a half week ago. Even though the battery didn't last well and heated up somehow and there are gliches with some apps, the phone and its original apps worked without problem. Once the battery died in the middle of the night but I thought that it was because I didn't plug the charger well enough, it's a little loose anyway. I read about the freezes and restarts in different forums and was wondering what people were talking about, since I didn't have any such kind of problems. I felt myself being lucky.
Then I got some app updates (Nokia drive+ and a few others), and ever since then my camera hasn't worked properly. When I open the camera app or click the camera button nine out of ten times it just goes back to the home screen or else it freeze the phone. I have tried soft resets and restarts but they mostly don't work, or they might work long enough to take a couple of photos and then stop working, or otherwise it freeze the phone and need to soft reset it. There is no pattens as to when it works and when it doesn't. I have also tried to uninstall some apps but it seemed to have no effect on the condition of the phone. Every app that utilizes the camera won't work ( camera won't work but other functions work), flashlight app won't work.
Today I decided to hard reset the phone. It's surprisingly easy procedure that took less than 10 min. I did my first hard reset and chose to use my phone's backup files from Skydrive and it went fine, except it didn't do anything to the camera, i.e. it didn't work. My second hard reset I chose to "start from clean table" (or something of such) without any apps installed, and also disabled the automatic update but it didn't do anything either, no working camera. I did the same procedure once more just in case I did something wrong, but it didn't work. The fourth hard reset I restored from Skydrive to have (mostly) everything in order. No working camera either but almost everything else works now.
It puzzles me. I'd though that if the reason of camera not working is some app updates then start from the clean table would have resloved it. Even after hard reset using camera at the very first possible chance didn't succeed: it worked for a very short moment before it froze the phone, just like before resetting. If I can keep myself from touching the camera the phone itself works (aside from maybe once or twice restartd itself, very rarely anyway). Now I have a phone with a camera I can't use and I don't have a clue what the problem is. I don't think that there are hardware problems because the camera *worked*, and I don't believe that software updates can break it hardware-wise. I have thought of changing it but who can promise that I'll get a phone that works better. Probably I should wait for Microsoft's/Nokia's updates, it just feels like they never come...hi mate,
Sorry to hear you are having such a rough time with your 920. In this case, it might be best to take your phone back to your point of purchase and ask for a replacement, and if they are being less than helpful, to take it to your local Nokia Care point instead: http://nokia.com/support
I can certainly empathise with you, as a lot of the issues you describe are apparently fixed by the Portico update by Microsoft that was released yesterday to AT&T and Rogers devices but not the rest of the Lumia Windows Phone 8 range unfortunately. Bit of a wait, but hopefully not too long until the update hits. -
How to figure out suitable Enhancement Option/point
Hi All,
I have to limit creation of vendor for a particularly one user based on Country Code.
For ex
if sy-uname eq 'XYZ'.
IF LFA1-NAME1 NE 'US'.
ERROR MESSAGE...
ENDIF.
ENDIF.
I know how to do that user user exits and was trying to figure out how can i achieve this using enhancement frame work in ECC 6.0
I found all below Explicit Enhancement Points/Sections when i searched in Pragram SAPMF02K (xk01)
If you just post the relevant coe, it has a better chance of formatting.
MY QUESTIONS ARE
1) How should i figure out which enhancement point i should use for particular issue (When the user is going from Vendor Address to Vendor control Screen while creating the vendor. It should an error mess if the user is using wrong vendor code?
Thanks in advance
Venki
Edited by: venki gundla on May 31, 2009 10:05 PM
Edited by: venki gundla on May 31, 2009 10:16 PM
Edited by: Rob Burbank on May 31, 2009 6:37 PMHi All,
For some reason ,every thing is continous. I know it sometimes irritating but i couldn't find a way to post it
Line by line.
Actually
MY QUESTIONS ARE 1) How should i figure out which enhancement point i should use for particular issue (When the user is going from Vendor Address to Vendor control Screen while creating the vendor. It should throw an error mess if the user is using wrong vendor country name than he is authorized to?
Thanks
Venki -
Trying to figure out how to get custom quiz concept to work
OK so I've been trying to get this concept to work in CP4. I have simulation quiz questions that gives the user 2 attempts to answer the quiz. The one hitch is that if the user get the question wrong the first time it gives them an "incorrect try again" message and if they get it wrong the second time it gives them an "incorrect please review section...." message. Now I've been trying to get this to work many ways and haven't been able to get the quiz to score right due to the fact I can't get CP to let me use the multiple incorrect feedbacks in a single click box.
I've tried setting up the questions using 2 click boxes (each click box has a different incorrect feedback message) but I run into the issue of if I answer the question right the first time then the second click box goes unscored and throws off the percentage. I've been trying to figure out a way to manipulate the captivate system variables (cpinfoquizpasspoints, cpinfototalquestionsperproject, cpinfopointsscored) but I can't for the life of me figure out how to update the variables (ex. overide the cpinfototalquestionsperproject with my own number or add additional points to the cpinfopointsscored variable if the user gets the question right the first time. Basically I need to fig out a way to get this to work and ultimately be able to communicate to a Sumtotal LMS what the results are. I'm very open to suggestions
Thanks
B
btw. I'm really disappointed that CP4 allows different feedback messages on multiple attmeps for their built in questions but not for custom click box questions!!!!I would try the multi choice like captiv8r said. if that doesn't work try a clickbox for each answer and:
Some quick notes for set up. Slide XX represents the slide that will contain the next question in the quiz. You may want to create all the slides (even if they are blank) as place holders for each question in the quiz. So if a question has 4 possible answers that's gonna be 4 slides for that question. If you have 5 questions and they all have 5 answers then you want to create 25 slides for the questions. (I think I did the math right on that )
Change the properties for the click box to on success: go to next slide (unless this is the correct answer then select jump to slide XX). Change the options
Under Options Only check Success Caption, Pause project until user clicks and pause for success/failure captions.
Click OK......You will be given a click box with a green box that says type success text here.
Right click on the green box and select Properties
If this box is the right answer type in Correct or something to that extent. If its the wrong answer type in "Answer is wrong because ..bla bla bla..... reasons". You can format the font to be red or green and choose the appropiate caption type to match your color scheme (or create your own custom caption)
Click OK.
After that all you have to do is duplicate the click box (right click on the click box and select duplicate) and edit the caption to be either "correct" or "answer is wrong because....."
Once you have all your captions in place you can copy the entire contents of the slide an paste it into the rest of the slides set up for that question (remember if the question has 4 answers then thats 4 slides for that question)
repeat steps 1 - 9 for the rest of the questions.
Some things you want to consider. If you only want to give the user say 2 attempts per question then you want to modify the setup to only 2 slides per question. That way if they get it wrong on teh second attempt they are advanced to the next question. If you are scoring this quiz you will have to set-up some variables for scoring.
The method above is what I used to answer my own question from the original post.... Lots of work but it got the job done! Good luck.
B -
Trying to figure out how to do a certain page
I am trying to figure out if there is a way to do a certain
page using Dreamweaver (4).
Here is the exact page I need.
http://phraseswallart.com/design.php
please... if you have any tutorials or can point me in the
right direction I would appreciate it!
Any advice?I'm afraid you would not be able to do such a page in DW4
unless you were
quite capable with hand-coded PHP. DW4 has no server-side
scripting
component at all....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ceejay77" <[email protected]> wrote in
message
news:g3jc7b$c7k$[email protected]..
>I am trying to figure out if there is a way to do a
certain page using
> Dreamweaver (4).
> Here is the exact page I need.
>
http://phraseswallart.com/design.php
> please... if you have any tutorials or can point me in
the right direction
> I
> would appreciate it!
> Any advice?
>
> -
I am trying to figure out if my daughter was the originator of a group message. If you go to iMessages and hit originate a message and type a letter it brings up her contacts as well as groups. Will it only bring up groups if she was the originator or will it bring up any group that she has been in even if she had not created it.
You'll find no issues other than things may not be pre-provisioned for you (the only case where it is important to choose the correct Template is when dealing with Publishing sites and Anonymous access; other templates don't have the ViewFormsLockdown feature
enabled by default, thus potentially disclosing site data in a public fashion).
PowerPivot and PerformancePoint can easily be enabled on standard sites using the Team Site template.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Trying to figure out how to print four postcards per two-sided page.
I've been a Mac user for a little over a year, and I love it, but with this latest (2014, OS X) version of Pages, I cannot find out how to set up my document so it will print four, two-sided postcards. The only postcard templates are two per page, and it feels like I've gone to the end of the application and back trying to figure out the answer.
Any help would be greatly appreciated!
:DanulJust adding to Viking's reply.
The trick is to get the second page (the back) to print behind the first set (the front) when you feed the paper back into the printer or use the duplexing function, if your printer has that.
Desktop printers do not feed paper very accurately so it is hard to align the two. It will pay to test if there is a consistent error in positioning and move the 2nd set to allow for it.
Best to aim for the centre of your paper stock, so adjust the artwork to have the two samples head to head exactly in the centre of the page with a 10mm or 3/8th inch gap between them. You can do this using the Graphics Inspector to position them and rotate the top postcard 180°.
Step by step:
1. Group and rotate the top postcard 180°
2. Position it with 10mm or 3/8th inch gap above the 2nd postcard
3. Group the two postcards and centre the set on the page
4. Do the same to the back set
5. Print the front set
6. Tumble turn or rotate the paper (test for what works) and put back into the printer to print the back set
7. Test by printing simple boxes the right size and shape to see how they align. Move template on the page to allow for any errors the printer makes.
For a set of 4 follow above on a landscape page, with another pair next to this one.
8. If there is only one design for the postcard (1 front and one back) they can be on the same page, head to head (see above) and when you feed the paper back in the printer, the back should print behind the front and the front behind the back to make up two double sided postcards.
Simply test, using dummies to indicate paper direction, rectangles with F & B in the centre, and take note which direction, and side up needs to go into the printer for what result. Then keep that information handy by the printer, with step by steps to repeat them.
Peter -
I am trying to figure out alpha channel, embedded in a .tiff?
I was told I could use the alpha channel to mask off rivers, lakes etc... on a satellite image of the ground. I need these selected areas to be black, whereas the rest could be white or transparent, but only on the alpha channel. (it makes my selected scenery area transparent so the water can seen through) then I suppose this can be saved all together with the original full color image as a tiff? or even .bmp would be fine. this is photo scenery for a flight simulator. so if I can get this image correctly it will be compiled into a .bgl
thanks anyone!!!?Hello, thanks for the point in the flightsim direction, and I have already mastered that method, which is very slow and I can only successfully work with very small areas at a time. Im using another method, very similar but I can get larger areas at once. but to compile in this program the final (.bmp or .tiff or whatever format) needs to have the water as an alpha channel in it. or so ive read. but there is very little about how to do that on the web. Ive even been to adobe's chat help 5 times now and haven't gotten 1 straight answer form anyone, in fact they all closed the window on me early with no explaination. I can create a watermask via layer as cut, and use it that way, but I am trying to figure out how to embed the watermask in a .tiff
-
Trying to scan photos from my photo album to a folder on my desktop. Have been trying to figure out for hours. Seems very complicated and cumbersome. Can anyone help? It's got to be much quicker (fewer key strokes) and simpler than what I've been able to discover.
Open the file, parse it, populate an ArrayCollection or XMLListCollection, and make the collection the DataGrid dataProvider:
http://livedocs.adobe.com/flex/3/html/help.html?content=Filesystem_08.html
http://livedocs.adobe.com/flex/3/html/help.html?content=12_Using_Regular_Expressions_01.ht ml
http://livedocs.adobe.com/flex/3/html/help.html?content=dpcontrols_6.html
http://livedocs.adobe.com/flex/3/langref/mx/collections/ArrayCollection.html
http://livedocs.adobe.com/flex/3/langref/mx/collections/XMLListCollection.html
If this post answered your question or helped, please mark it as such. -
Trying to figure out what's using my RAM
A couple of weeks ago I starting to notice that my memory was getting chewed up slowly until I'd hit around 20MB remaining. the only way that I could free up the space is through 3rd party memory utilities such as FreeMemory. It appears on further inspection memory appears to go inactive, but this isn't very healthy, yet very odd, so I'm trying to figure out if there's a memory leak somewhere.
Any help would be wonderful. Below is my Etracheck log. I've attempted to remove alll external hard drives and other devices connected via either thunderbolt and USB with no change. Rebooted a few times however the memory gets eaten right up again.
My initial thought was that it's somehow VMWare however my Windows 7 instance is running at a fixed rate, and even with the instance shut down, my computer would still eat up any available memory.
Thank you!
Hardware Information:
iMac (27-inch, Mid 2011)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
AMD Radeon HD 6970M - VRAM: 2048 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 19:6:22
Disk Information:
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (609.08 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H
USB Information:
HP External HDD 2 TB
HP SimpleSave (disk8s1) /Volumes/HP SimpleSave: 2 TB (202.96 GB free)
Western Digital Ext HDD 1021 2 TB
WD (disk6s1) /Volumes/WD: 2 TB (683.89 GB free)
Initio WD20EARX-32PASB0 2 TB
EFI (disk2s1) <not mounted>: 209.7 MB
disk2s2 (disk2s2) <not mounted>: 2 TB
Boot OS X (disk2s3) <not mounted>: 134.2 MB
Initio WD15EARS-00Z5B1 1.5 TB
MUSIC (disk1s1) /Volumes/MUSIC: 1.5 TB (347.84 GB free)
Western Digital Ext HDD 1021 1 TB
Elements (disk5s1) /Volumes/Elements: 1 TB (119.86 GB free)
Seagate FreeAgent 500.11 GB
EFI (disk4s1) <not mounted>: 209.7 MB
FA (disk4s2) /Volumes/FA: 499.76 GB (350.5 GB free)
Western Digital My Passport 0748 1 TB
My Passport (disk7s1) /Volumes/My Passport: 1 TB (710.73 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. iPad
Brother MFC-495CW
Logitech USB Receiver
Logitech USB Receiver
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Configuration files:
/etc/hosts - Count: 30
Kernel Extensions:
com.kaspersky.kext.klif (3.0.3a40)
com.kaspersky.nke (1.6.3a13)
com.logmein.driver.LogMeInSoundDriver (1.0.0)
com.splashtop.driver.SRXDisplayCard (1.6 - SDK 10.7)
com.silex.driver.sxuptp (1.5.1)
com.splashtop.driver.SRXFrameBufferConnector (1.6 - SDK 10.7)
com.kaspersky.kext.kimul.44 (44)
com.kaspersky.kext.mark.1.0.5 (1.0.5)
com.regularrateandrhythm.driver.RowmoteIREmu (1.0)
com.tuxera.filesystems.tufsfs.fusefs_txantfs (2012.4.17)
com.vmware.kext.vmci (90.5.7)
com.vmware.kext.vsockets (90.5.7)
com.vmware.kext.vmnet (0133.15.45)
com.vmware.kext.vmx86 (0133.15.45)
com.vmware.kext.vmioplug.12.1.12 (12.1.12)
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.SwitchBoard.plist 3rd-Party support link
[System] com.bjango.istatmenusdaemon.plist 3rd-Party support link
[System] com.disc-soft.DAEMONTools.PrivilegedHelper.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.kaspersky.kav.plist 3rd-Party support link
[System] com.logmein.logmeinserver.plist 3rd-Party support link
[System] com.logmein.raupdate.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.parallels.desktop.launchdaemon.plist 3rd-Party support link
[System] com.splashtop.streamer-daemon.plist 3rd-Party support link
[System] com.teamviewer.teamviewer_service.plist 3rd-Party support link
[System] com.timesoftware.timemachineeditor.backupd-auto.plist 3rd-Party support link
[System] org.macosforge.xquartz.privileged_startx.plist 3rd-Party support link
[System] xxx.qnation.PeerGuardian.kextload.plist 3rd-Party support link
Launch Agents:
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.Affinegy.InstaLANa.plist 3rd-Party support link
[System] com.bjango.istatmenusagent.plist 3rd-Party support link
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.kaspersky.kav.gui.plist 3rd-Party support link
[System] com.logmein.logmeingui.plist 3rd-Party support link
[System] com.logmein.logmeinguiagent.plist 3rd-Party support link
[System] com.logmein.logmeinguiagentatlogin.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.parallels.desktop.launch.plist 3rd-Party support link
[System] com.parallels.DesktopControlAgent.plist 3rd-Party support link
[System] com.parallels.vm.prl_pcproxy.plist 3rd-Party support link
[System] com.splashtop.streamer-for-root.plist 3rd-Party support link
[System] com.splashtop.streamer-for-user.plist 3rd-Party support link
[System] com.teamviewer.teamviewer.plist 3rd-Party support link
[System] com.teamviewer.teamviewer_desktop.plist 3rd-Party support link
[System] net.culater.SIMBL.Agent.plist 3rd-Party support link
[System] org.macosforge.xquartz.startx.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.eltima.Folx.Agent.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac.helperTool.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist 3rd-Party support link
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
[not loaded] com.valvesoftware.steamclean.plist 3rd-Party support link
[not loaded] ws.agile.1PasswordAgent.plist 3rd-Party support link
User Login Items:
Adium
Firefox
Thunderbird
Vidalia
[PC ~ Multi9] Football Manager 2010.iso
iTunesHelper
MagiCal
Connect360Helper
Kodak EasyShare Wireless Listener
GrowlHelperApp
Microsoft Database Daemon
Weather Vane
VMware Fusion Helper
Dropbox
Spotify
Octoshape
SIMBL Agent
iSkysoft Helper Compact
pCloud
OpenDNS Updater
smcFanControl
TSPrint Client
Rowmote Helper
Internet Plug-ins:
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
LogMeInSafari32: Version: 1.0.530 3rd-Party support link
googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 3rd-Party support link
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
LogMeInSafari64: Version: 1.0.530 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
NPTWCP: Version: (null) - SDK 10.5 3rd-Party support link
CitrixICAClientPlugIn: Version: 11.2.0 3rd-Party support link
Silverlight: Version: 5.1.20513.0 - SDK 10.6 3rd-Party support link
LogMeIn: Version: 1.0.530 3rd-Party support link
FolxNetscapePlugIn: Version: Unknown
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.0.0.126 - SDK 10.8 3rd-Party support link
o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
SharePointBrowserPlugin: Version: 14.3.6 - SDK 10.6 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 21 Outdated! Update
z: Version: (null) - SDK 10.5 3rd-Party support link
Safari Extensions:
Dashlane: Version: 2.3.2.52081
iTube Studio: Version: 4.1.0.2
Kaspersky URL Advisor: Version: 8.0.5
Virtual Keyboard: Version: 14.0
YouTube Downloader: Version: 4.8.0.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
TuneUp Visualizer: Version: 2.2.0 3rd-Party support link
AudioScrobbler: Version: 3.0.4 3rd-Party support link
User Internet Plug-ins:
Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 3rd-Party support link
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
FolxNetscapePlugIn: Version: Unknown
OctoshapeWeb: Version: 1.0 - SDK 10.8 3rd-Party support link
3rd Party Preference Panes:
Citrix Online Plug-in 3rd-Party support link
Connect360 3rd-Party support link
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Growl 3rd-Party support link
Java 3rd-Party support link
MacFUSE 3rd-Party support link
Perian 3rd-Party support link
Tuxera NTFS 3rd-Party support link
Old Applications:
Microsoft Language Register: Version: 14.3.6 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
/Users/[redacted]/Library/Application Support/Helper
iSkysoft Helper Compact: Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
Aimersoft Helper Compact: Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
PwnageTool: Version: 4.3.3 - SDK 10.4 3rd-Party support link
/Users/[redacted]/Desktop/iOS4 Jailbreaking/PwnageTool.app
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.6 - SDK 10.5 3rd-Party support link
DockPlistEdit: Version: 7.0 - SDK 10.5 3rd-Party support link
/Library/Parallels/Uninstaller/Parallels Hypervisor/DockPlistEdit.app
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.6 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.6 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Meteorologist: Version: 1.5.6 - SDK 10.4 3rd-Party support link
Lithium Core Admin: Version: 5.0.15 - SDK 10.5 3rd-Party support link
Microsoft Communicator: Version: 13.1.3 - SDK 10.5 3rd-Party support link
Lithium Console: Version: 5.0.15 - SDK 10.5 3rd-Party support link
SpotiMy: Version: 1.1 - SDK 10.0 3rd-Party support link
Rowmote Helper: Version: 3.4.1 - SDK 10.5 3rd-Party support link
iPhone Explorer: Version: 2.1.0.1 - SDK 10.0 3rd-Party support link
Data Rescue 3: Version: 3.2 - SDK 10.4 3rd-Party support link
Rivet: Version: 2.8.0 - SDK 10.5 3rd-Party support link
Remote Desktop Connection: Version: 2.1.2 - SDK 10.5 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
dynamiclinkmanager: Version: 6.0.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
dynamiclinkmediaserver: Version: 6.0.1 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
iSkysoft Helper Compact: Version: 2.2.5.6 - SDK 10.5 3rd-Party support link
/Applications/iSkysoft Helper Compact/iSkysoft Helper Compact.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Audacity: Version: 1.3.13.0 - SDK 10.4 3rd-Party support link
/Applications/Audacity/Audacity.app
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
SA Color Finesse 3 UI: Version: 3.0.6(275) - SDK 10.5 3rd-Party support link
/Applications/Adobe After Effects CS6/Plug-ins/Effects/Synthetic Aperture/(CF3 Support)/SA Color Finesse 3 UI.app
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 363.47 GB
Destinations:
Untitled [Local] (Last used)
Total size: 2
Total number of backups: 59
Oldest backup: 2013-12-15 08:32:21 +0000
Last backup: 2014-03-23 19:01:48 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 363.47 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
158% vmware-vmx
139% Adium
38% plugin-container
7% thunderbird
6% firefox
Top Processes by Memory:
3.55 GB vmware-vmx
1.01 GB firefox
410 MB thunderbird
262 MB kav
229 MB plugin-container
Virtual Memory Information:
1.03 GB Free RAM
5.20 GB Active RAM
5.07 GB Inactive RAM
4.44 GB Wired RAM
5.09 GB Page-ins
1.01 GB Page-outsYou have waaaaaay, waaaaaay too much software and "garbageware" installed on your Mac!
Plus, you are treating your Mac too, tooo much like a Windows PC!
Are you a former WindowsPC user?
You do not need all of this software crap and "garbageware" you have installed on your Mac.
How many applications do you run simultaneously in the background while working in another application?
With 16 GBs of RAM, you should not be experiencing any memory Page out issues. Yet, you have over a GB of memory Page outs!
You are, probably running tooo many applications at once. You need to cut back the amount of open applications that you have up and running concurrently OR install even MORE RAM!
Your year and model Mac can take up to 32 GBs of RAM.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
Unless you are running Kaspersky antivirus software under your Windows setup, completely uninstall this from OS X per instructions on the developer's website.
OS X does not need antivirus software. Antivirus software can slow down the normal operation of OS X and have adverse and negative effects on performance and operation of OS X.
Compleley uninstall CleanMyMac per the instructions on the developer's website.
http://macpaw.com/support/cleanmymac/knowledgebase/how-to-uninstall-cleanmymac-2
Again, you have waaaaay toooo many user startup/login items!
You need to really, REALLY, look at these at determine what you need to have launch at startup or Login.
You really need to whittle this waaaay down!
All of these items launching at startup/login is causing a large part of your Mac slowdowns.
Add or remove automatic items
Choose Apple menu > System Preferences, then click Users & Groups.
Select your user account, then click Login Items.
Do one of the following:
Click Add below the list on the right, select an app, document, folder, or disk, then click Add.If you don’t want an item’s windows to be visible after login, select Hide. (Hide does not apply to servers, which always appear in the Finder after login.)
Select the name of the item you want to prevent from opening automatically, then click Delete below the list on the right.
Google software is ,currently, not 100% compatible/compliant with OS X Mavericks. Especially Google Chrome and Drive.
So, uninstall all Google software per the instructions on Google's website until Google posts an "official" fix/update for these.
If you do not like Apple's Safari Web browser, try using Mozilla Firefox, instead. Mozilla constantly updates FireFox and there is a new update available.
Also, Telestream Flip4Mac plugin is an issue on OS X Mavericks. If there is no Mavericks update for this plugin, then completely unistall this plugin per instructions on the Telestream website. Use the newest version of VLC player, instead.
Completely Uninstall MacFUSE. There hasn't been any updates for this in a couple of years and is outdated and incompatible with Mavericks. Uninstall per instructions on the developer's website, also.
You need to update all of your third party software if there are OS X Mavericks updates that can be applied.
You may need to,ACTUALLY, go to the third party developers' websites if there are no updates through the Mac App Store.
Update all of your Web browser Internet plugins, extensions and add ons, also.
Also, if you have any connected third party devices, like non-Apple keyboards, mice, drawing tablets, hubs, card readers, etc, you need to go to the device makers' websites' and update the drivers for these devices to OS X Mavericks compatible versions, if available, applicable and needed.
Good Luck to you! -
been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft version? Help me please.. getting a bit bored?
i have this problem too
my dad thinks its because itunes is getting overloaded
Maybe you are looking for
-
The online conversion of my pdf file to word did not correctly convert the tables and certain other formatting. I wish to obtain a refund.
-
How to setup iPad with HP3056A
I just purchased new iPad and want to set up HP 3056A printer. According to HP this printer has AirPrint capabilities. I do not have a working computer. I have wireless Internet in my home. Can someone please give me some direction of where to start.
-
Dear I've been using this phone for quite awhile now and everything was fine but now whenever I try to upload pics on Facebook, twitter and instagram it's say it can't upload at this time or the pic cannot be opened... Kindly help
-
I am trying to get the following code to parse the text areas out of a Word 2007 document. public static void main (String[] args) { InputStream docXMLIS = null; ZipFile docxFile = null; ZipEntry docXML = null;
-
Mountain Lion OS X has recently been installed, and "Help" for Safari, MS Word, Dictionary, MS Excel, Mail, iTunes, Notes, Calculator, and there may be others, will not function. "Help" is accessible, but you can proceed only so far before the follo