Trying to get 'External Sample Editor' working.

Hello,
I cannot find anything in the manual about changing preferences as to what editor you are using. I found the key command and tried to get DP as my external but once I saw that wasn't going to work I couldn't find any possible way to change my choice of editor. There seems to be no preference or menu that would let you pick a new one. Is my only choice to complete trash prefs and rebuild everything? Not a huge ordeal but tedious none the less.
Chris

It's a lot easier than that.
On my system there is an alias :
~/Library/Preferences/Logic/External Sample Editor
You could try removing the file from it's location or going about the 'select new original method.

Similar Messages

  • "Open in external sample editor" seems to be broken?

    Hey all,
    I'm hoping that someone can help me figure this out. I'm using Logic Pro X 10.0.7 in conjunction with Adobe Audition CS6. This problem seems to happen intermittently, and on some of my machines, but not others. I've also witnessed it on others' machines as well.
    When I try to open a region of audio in the external sample editor (For which I've set up Adobe Audtion CS6 to do destructive edits), I can manage to get the file to open correctly in Audition. HOWEVER, when I make my edits in audition and try to SAVE the file in Audition to send it back to Logic Pro X, I get an error message that the file cannot be saved because it is "in use by another application". It's almost as if Logic doesn't release the file to the external sample editor in order for it to be overwritten, and updated.
    When I switch back to Logic, after I get the error message, Logic "refreshes" the waveform information, but it's still unchanged, because the external sample editor can't save the changes that I've made to the region. Can anyone relate? Offer me useful tips on how to fix this? Is it a bad configuration on my end, or just a bug in Logic?
    Thanks,
    Steve

    Ok so I think I might have figured this out on my own... Apparently, if you highlight a region, and the region is open in Logic's Editor window, while you're trying to edit the region with an external editor like Audition, it will throw the "file is in use by another application" error, when you try to save the changes you've made in the external editor. I found that if I close the "Editor" window in Logic, before trying to open the region in Audition, Audition is then able to save the changes to the file.
    Derp.

  • External sample editor

    how do I open an audio file from logic in an external sample editor? I know you can do it, but can't find in the manual how you do this or how to set what the default sample editor is when you open the file in the external editor
    Thanks

    There is a key command Search:
    "external"
    in the KC window. Assign it. 1st time you use it you will gett a prompt to select the app.
    Cheers,, J

  • External Sample Editor Broken

    "To transfer audio edited in the external sample editor back to Logic Pro
    Save the file in the external sample editor, then switch back to Logic Pro.
    The edited audio will be updated in the Audio Bin and Arrange area, if regions based on the audio file are in use. "
    This USED to be true but no longer
    I'm using Melodyne Single Track and instead of updating the relevant file in the arrange window I'm having to 'reimport' the tuned file.

    Ok so I think I might have figured this out on my own... Apparently, if you highlight a region, and the region is open in Logic's Editor window, while you're trying to edit the region with an external editor like Audition, it will throw the "file is in use by another application" error, when you try to save the changes you've made in the external editor. I found that if I close the "Editor" window in Logic, before trying to open the region in Audition, Audition is then able to save the changes to the file.
    Derp.

  • I have an ipod touch 2nd generation, i'm trying to get apps that will work and i cant find any. Its says i need an update because it has ios 3.1.3 , but on itunes it says there is no update ? what apps can i get??

    i have an ipod touch 2nd generation, i'm trying to get apps that will work and i cant find any. Its says i need an update because it has ios 3.1.3 , but on itunes it says there is no update ? what apps can i get??

    Sounds like you actually have a 1st generation as those cannot update beyond iOS 3.1.3.
    Model Identifier Utility
    rachelfromnorthumberland wrote:
    what apps can i get??
    Finding iOS Apps Compatible with Older Devices

  • I am using an I phone 5 in Germany and trying to get text messaging to work through the hands free Bluetooth connection on a Honda CRV. It keeps telling me that text messaging is not a feature of my phone. messages come in on the phone.How to resolve ?

    I am using an I phone 5 in Germany and trying to get text messaging to work through the hands free Bluetooth connection on a Honda CRV. It keeps telling me that text messaging is not a feature of my phone. messages come in on the phone.How to resolve ?

    mono 8 bit 8k is 64kbps, yes. 8 bits times 8,000 = 64,000 = 64k bits/sec.
    And yes I think that's a typo - there's no such thing as 'Mone' that I've ever heard of...
    But you might want to check to find out if this is a mu-law non-linear format, possibly - there are several ways that 8 bit 8k wav files can be encoded, and typically phone systems don't use linear ones. If you have a log-in to Zultys' user-base system they have an FAQ there, I believe - the answer might be in that, and it won't cost $500.

  • I am trying to get my printer to work.

    I am trying to get my printer to work. It is a Canon MP240, it does not show up in the printers menu. Though it is plugged in via USB.

    This printer does have a driver available via Software Update, meaning that when you connect the printer to the Mac via USB cable the driver should be downloaded and installed automatically for you. Of course this will not occur if the Mac cannot detect the printer at the end of the cable. So if you open Print & Scan, select to Add and the MP240 is not shown in the Default Add Printer view then there could be a problem with the USB cable or with the printer.
    To double-check if the printer can be seen by the Mac, open System Information and under the Hardware entry in the sidebar, select USB. Then in the top right pane you will see all the USB connections on your Mac and what is currently connected to them. If the MP240 is not shown, then try moving the cable to a different USB port on the Mac. And don't use a USB hub or the USB port on the keyboard. If moving doesn't help the printer appear under one of the USB busses, then try a different USB cable. If that still doesn't help, turn off the power to the printer and unplug the power cord for 10 minutes before reconnecting and turning it back on.

  • How to unset External Sample Editor?

    How do I unset External Sample Editor (and switch back to logics default sample editor)...?????

    Assign it in the preferences, set a location in your apps folder, STP is selecetd by default. Hit shift+w with an Audio region selected to open the audio in the assigned app.

  • My Pro Tools program was damaged by the Creative Cloud system. I was invited to install and try the Cloud,but it did me a great dis-service and has set me back in Production and personal time trying to get my pro Tools working again. I am really disappoin

    My Pro Tools program was damaged by the Creative Cloud system.
    I was invited to install and try the Cloud,but it did me a great dis-service and has set me back in Production and personal time trying to get my pro Tools working again. I am really disappointed and would like you to advise me how to restore my program to its working state. I am in a traumatic state since I have Artistes life work being processed in the Pro Tools 9 Program. Help! Help! Please.Ps. I tried reinstalling the software from the Disc....Still NOT working.

    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Getting Pro Samples to work in ESX 24

    Hi
    I have had difficulty in trying to get Pro Samples to load and play in ESX24. There is nothing wrong with the samples, as they play well individually on Quicktime, but I just cannot get it right with ESX24.
    I have consulted various people including the very helpful Andertons of Guildford but the collective intellect of all has not been able to crack it. Is anyone else out there having the same problem?
    The current betting is on L7.1 being 'different' from L6 in certains ways, one of which may be conflicting with the way .exs and .aif files are 'seen' by ESX 24 in the default hierachical structure that OSX favours, and in which L7 loads itself. Anyway it is a bit of a pain and I have spent enough time on this and so I will be most grateful if anyone who has been sucessful in loading Pro Samples could precisly tell me how they have acheived it.
    regards

    Try this:
    Get info on one of the samples by selecting it once and press" command I"
    Make sure the file status is read/write instead of read only.
    If they are read only you will have to change the status of all the files and folders associated with the sound collection.

  • Im trying to get my imessage to work on my iphone4

    im trying to get my imessege to work on my iphone4,i set up the account and did everything by the book .
    the imessege works fine on my macbook but dont seem to work on my iphone .
    i allways had this probleme on my iphone but recently i upgraded my ios to ios 7 and it didnt made any diference .
    please help....

    This may be of use,
    http://support.apple.com/kb/HT4527

  • 1212m - can't get external sync to work under XP Home...

    I gave up trying to run this card under my XP64 system because it's not compatible with 64-bit apps. That's the subject of another thread...
    I used to run it in an XP Pro system (32 bit) but have now moved it to an XP Home system and I can't get the external sync to work. The sync is coming in on the ADAT line and I select it in the options menu but the mixer always says "Internal" source for the clock. Furthermore, when I set the source to external, close the options dialog, then re-open it, it's back on internal.
    The ADAT lines are correctly linked because I can hear the distorted audio coming across. What's more, when I set external sync in the options, the card seems to be sync'ed because the distortion goes away, even thoug the mixer still says internal sync. But if I shut down and re-boot, or if I change sample rate on the external source, it goes back to the distorted sound.
    Let's see if this one gets any responses...
    rgames

    conejo61 wrote:
    Yes, it's connected to the power adaptor and I have an external trackball and keyboard.
    You will have to keep them both open and play around with monitor settings until you get them both working. Keep doing "Gather windows" in System Preferences to get the display preferences window for the 2nd monitor and change it each time it doesn't display anything.
    I don't know what it means "you will have to set it".
    You have to set the desktop for the additional screen. Once you get closed clamshell to work, the external monitor will be your primary screen and you won't have to worry about it.

  • Can't get external monitor to work

    I've used a Mac laptop for the last 8 years, finally decided to get an external monitor for home use.
    I purchased a 25" Hanns-G HZ251. It's not working as I would expect it to work. I've got a standard DVI connection on my older MacBook Pro so I'm connecting via a DVI to DVI cable.
    The only way I can get the monitor to display what is actually on my laptop is to have my laptop open and mirroring turned on. I thought I could have my laptop shut and the monitor would still work when connected, but when I shut my laptop it just goes black.
    If I leave my laptop open but turn mirroring off, I get the generic purple Mac desktop, not my desktop.
    What am I doing wrong?
    There's an install CD that comes with it, but that only runs on a Windows machine. I appreciate any advice, I'm fairly technically handy but this is my first foray into using external monitors, so I'm definitely struggling to figure this out. Thanks.

    conejo61 wrote:
    Yes, it's connected to the power adaptor and I have an external trackball and keyboard.
    You will have to keep them both open and play around with monitor settings until you get them both working. Keep doing "Gather windows" in System Preferences to get the display preferences window for the 2nd monitor and change it each time it doesn't display anything.
    I don't know what it means "you will have to set it".
    You have to set the desktop for the additional screen. Once you get closed clamshell to work, the external monitor will be your primary screen and you won't have to worry about it.

  • Can't get External API to work in IE7

    I'm trying to get a Flash Ad to call a Javascript function in
    an Ajax page. I'm using ActionScript 2.0 ExternalAPI to call a
    function in the page that adds an item to a shopping list. I can
    get this to work in all browsers except IE7. It even works in IE7
    when I put this Ad alone in a basic html page, but as soon as I put
    it in an Ajax page it does not call the function in IE7.
    I appreciate any help or suggestions

    Thanks for the input. I'm not familiar with Ajax so it helps
    to know if there are any known issues. I assumed it was an Ajax
    issue because the same ad works in a non-ajax web page that uses
    frames. The ad is being served through DoubleClick, here is the
    rich media code that embeds the Flash Ad:
    <!-- This is DART's Rich Media code template. It basically
    checks user's flash version and browser, embeds flash creative in
    page or serves fall back image if user does not have the required
    version of flash player. -->
    <SCRIPT LANGUAGE=JavaScript>
    <!--
    var dcswf = "%h/1146572/HormelFlash.swf";
    var dcgif = "%h/1146572/HormelFallBack.jpg";
    var advurl = "%c%u";
    var dcadvurl = escape(advurl);
    var dcminversion = 8;
    var dcmaxversion = 9;
    var plugin = false;
    var dccreativewidth = "300";
    var dccreativeheight = "250";
    var dcwmode = "transparent";
    var dcbgcolor = "FFFFFF";
    var dcallowscriptaccess = "always";
    if (((navigator.appName == "Netscape") &&
    (navigator.userAgent.indexOf("Mozilla") != -1) &&
    (parseFloat(navigator.appVersion) >= 4) &&
    (navigator.javaEnabled()) && navigator.mimeTypes &&
    navigator.mimeTypes["application/x-shockwave-flash"] &&
    navigator.mimeTypes["application/x-shockwave-flash"].enabledPlugin))
    var plugname=navigator.plugins['Shockwave
    Flash'].description;var
    plugsub=plugname.substring(plugname.indexOf("."),-1); var
    plugsubstr=plugsub.substr(-1)
    if( plugsubstr >= dcminversion) { plugin = true;}
    else if (navigator.userAgent &&
    navigator.userAgent.indexOf("MSIE")>=0 &&
    (navigator.userAgent.indexOf("Opera")<0) &&
    (navigator.userAgent.indexOf("Windows 95")>=0 ||
    navigator.userAgent.indexOf("Windows 98")>=0 ||
    navigator.userAgent.indexOf("Windows NT")>=0) &&
    document.all)
    document.write('<script language=VBScript>' + '\n' +
    'dcmaxversion = '+dcmaxversion + '\n' +
    'dcminversion = '+dcminversion + '\n' +
    'Do' + '\n' +
    'On Error Resume Next' + '\n' +
    'plugin =
    (IsObject(CreateObject(\"ShockwaveFlash.ShockwaveFlash.\" &
    dcmaxversion & \"\")))' + '\n' +
    'If plugin = true Then Exit Do' + '\n' +
    'dcmaxversion = dcmaxversion - 1' + '\n' +
    'Loop While dcmaxversion >= dcminversion' + '\n' +
    '<\/script>');
    if ( plugin ) {
    adcode = '<OBJECT
    classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"'+
    ' ID="FLASH_ID" WIDTH="'+ dccreativewidth +'" HEIGHT="'+
    dccreativeheight +'">'+
    '<PARAM NAME=movie VALUE="' + dcswf + '?clickTag='+
    dcadvurl +'"><PARAM NAME=quality VALUE=high><PARAM
    NAME=bgcolor VALUE=#'+ dcbgcolor +'><PARAM NAME=wmode
    VALUE='+ dcwmode +'><PARAM NAME="AllowScriptAccess"
    VALUE="'+dcallowscriptaccess+'">'+
    '<EMBED src="' + dcswf + '?clickTag='+ dcadvurl +'"
    quality=high wmode='+dcwmode+
    ' swLiveConnect=TRUE WIDTH="'+ dccreativewidth +'"
    HEIGHT="'+ dccreativeheight +'" bgcolor=#'+ dcbgcolor+
    ' TYPE="application/x-shockwave-flash"
    AllowScriptAccess="'+dcallowscriptaccess+'"></EMBED></OBJECT>';
    if(('%eenv!'!="j")&&(typeof
    dclkFlashWrite!="undefined")){dclkFlashWrite(adcode);}else{document.write(adcode);}
    } else {
    document.write('<A TARGET="%t" HREF="%c%u"><IMG
    SRC="' + dcgif + '" alt="" BORDER=0></A>');
    //-->
    </SCRIPT><NOSCRIPT><A TARGET="%t"
    HREF="%c%u"><IMG SRC="%h/1146572/HormelFallBack.jpg" alt=""
    BORDER=0></A></NOSCRIPT>
    the ad can be viewed here:
    http://ads.beta.groceryshopping.net/Shop/WeeklyAd.aspx

  • I am trying to get TRON-Legacy to work on itunes......

    I have been trying to get the TRON-Legacy soundtrack to work on Itunes and it isn't reading, or doing the internet download that it needs to do to aquire the music and such. I have tried multiple times and have had no success.
    Can someone help me?
    Thanks!

    I'm assuming this is the iPod Touch, since that is the only iPod that accesses the iTunes store. I would recommend you post this here https://discussions.apple.com/community/ipod/ipod_touch

Maybe you are looking for