Trying to reinstall appleworks 6.2.2 on windows 7 but it won't launch...Help!
recently bought a new PC, installed apple works but it won't launch - running windows 7. Tried installing in compatible mode using xp sp3, but that didn't work either. Is it a hopeless case?
Hello
I have installed it on a 32bit Win 7 installation with no problems. I dont think I even installed it in compatibility mode. I think I just ran the Windows installer and was done with it. Anyway, I know my reply is late, but if you still need help, go ahead and reply.
Similar Messages
-
My ipod touch gen 5 is disabled and wont sync, i tried to reinstall the itunes (yes, the latest version) but still itunes doesnt recognized my device. help
Did you place the iPod in recovery mode? That is required for a disabled iPod
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
1. The phone charges it's battery
2. I can open it in My Computer and import/export media files.
In iTunes
3. It start to sync until step 3 then stops.
4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
I hope you can provide me a solution for this problem.
Thanks,
RalphHi ralphagir,
Welcome to the Apple Support Communities!
For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
Safely disconnect iPod
http://support.apple.com/kb/HT1853
Have a great day,
Joe -
I have an ipad air and I'm trying to set up a telus email on it but it won't work. I keep getting a message saying username or password for IMAP is incorrect...please help!
This has nothing to do with iPhoto. When I have this type of problem I call tech support for my email service. They probably are the only source of the correct settings
LN -
My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!
With your phone plugged in, open Image Capture and see if the iPhone shows up. If not, you are having a sync problem. If it shows up in Image Capture, but not iTunes, I'd delete iTunes and reinstall it.
-
Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I have an iPhone 4S that won't charge. I have tried with 5 different cords and 2 wall plug but it won't connect. It will work if I plug and unplug my phone for 20 minutes. Please help me! Do I need a new phone or is this something that can be fixed?
Clean out the charging port--make sure there's no dust or debris in there. If that fails to solve the issue, bring the phone to Apple for evaluation.
-
I have a white screen on my iphone 3G since last night.. I tried a holding home and on/off buttons down but it won't switch off - help
Apparently, this is caused by a loose connection between the "guts" of the phone and the LCD screen. While it only displays white, the touch screen will still operate correctly - so if you know where to swipe, you can still power it off or unlock the screen, or touch to answer a call or etc.
With my phone, pinching the top right corner near the power button while pushing the home/power button to wake up the phone, seems to tighten the connection enough for it to work. I have not had to maintain the pinch after waking up the phone, but I do have to do it each time I unlock the screen. I have gotten by for about 6 months so far, and hoping the iphone 5's come out soon!!
Gaila -
I've tried updating iTunes for Windows but it won't work. I removed iTunes and downloaded the new version (10.6.1.7) but it won't load. It says it cannot removed the older version of iTunes.
It says it cannot removed the older version of iTunes.
Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.) -
Whilst synching to my PC it said there was a software update for the iPhone.
It is now stuck with a message saying connect to iTunes. I've tried resetting it in various ways but it still comes back to Connect to iTunes, but it won't.
Help!See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID. I have tried to copy and paste in the browser window, but that doesn't work either.
Have you tried accessing the email from another computer, device, email client or web browser?
-
I'm trying to reinstall photoshop CS5 in a new laptop (pc) but i have an "The serial number is not valid for this product" error.
I have deactivated photoshop in the old computer.
The old laptop have photoshop installed with the DVD but the new laptop don't have DVD so i downloaded cs5 from Download CS5 products. ¿Maybe doing this is an error?the installation files work the same whether from a disc or download, but there are other ways to mismatch a serial and installer.
Error "The serial number is not valid for this product" | Creative Suite -
i can't open my itunes , i tried to delete it and install it back already but still not working , please help
No , it is something crushed in my computer ? i keep re-download it and tried to download some old version itunes my computer is a Window 7 . i can't backup my iphone and ipad now pleses help , thank you
-
Reinstall requires serial number from qualifying product, but it won't work
I'm reinstalling from hard drive failure. Acrobat says serial number is valid but can't find qualifying product on hard drive and it needs earlier version serial number.
I've had a full version from earlier versions but it won't take the serial number.
Waiting for support on phone lines and chat is brutal. Any ideas??Hello everyone.
Ended up there was some sort of glitch, as when I reinstalled the complete suite of Adobe products there was no trace of anything on the new hard drive. From the drop down menu it only had a choice for serial numbers as far back as Acrobat 8. My original FULL version was well before that and that serial number would not work.
I contacted Customer support and after they verified all of my Adobe products including my older full version of Acrobat Pro, and they had to issue a new serial number.
I then was instructed to uninstall Acrobat, then reinstall with the new serial number.
All is now fine.
It certainly pays to have your software properly registered with Adobe
TG -
Hello. I dropped my ipad, first gen, from my chair to the floor. The screen went black and I can't start it again. I have tried to hold both buttons down at the same time, but nothing happens. Any help?
You will probably have to contact Apple for repair but before you do try this:
Turn your iPad upside down on your lap and give it a hard smack on the back.
Maybe you are looking for
-
How can I insert an image(JPG) into a SQL database?
I have written an application to perform some tests in the lab. After gathering the data I store it into a SQL Server. I successfully managed to export all my raw numbers and calculations to the DB. However I have not been able to export a screens
-
What technology that can be used for the creation of Need Definition?
Being on SAP SRM 4.0, we currently have a requirement for creation of Need Definition( Basically a build up for the contract ). Need being collected from the Backend systems need to be validated and approved by Buyers & Lead Buyers in the SRM system.
-
Why itunes won't open on phone since I downloaded ios7?
Itunes will not open on phone since I downloaded ios7
-
Hi All, I would be thankfull is someone help to prepare Credit detail Ledger Report in SAP. How and from where the data can be pulled for reporting? Thanks, V.Rajeshwari
-
Calculate depreciation only to the specified value
Hi experts, I would like to calculate depreciation only to the specified value, not to the net value = 0, but for example =1000. How do I? Do you by setting the value of the scrap? Rgds Stenwa