TS1347 Since the most recent download from Apple my calendar will not accept a new entry. I turned the phone off, back on, and it would then accept a new entry. Then would stop again. Attempted the on-off fix and now that does not work.

Since update of iOS7.0.2 my calendar has been problematic by not accepting new data (appointments) intermitingly. The first time I turned off the phone and restarted which then accepted the new data for an event. Worked fine a few days the would not again accept new data. The on/off fix does not now work. Went online with Apple support, went through an online dianogistic which after the calendar function worked. Today it again will not take new data. One good thing is once the data is visible in Calendar it stays.

SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D

Similar Messages

Since the most recent download on 8/3, my Adobe is not working?

Since the most recent download on 8/3, Adobe is not working for reading and downloading PDF's. I have tried everything!

Adobe software isn't needed in OS X.
Preview and Safari can both read PDF's.

HT201210 after the most recent download, i have been unable to use my ipod...there is the iTunes symbol and the power/charger on screen?

I did the most recent download on my iPod Touch and now I am unable to use it at all. The iTunes symbol and the charger are shown on the screen, but I am unable to do anything!

Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

HT201406 how do i fix my iphone that does not do anything

how do i fix my iphone that does not do anythig

With the very limited information you have given, I would try a reset - hold the power button and the home button until you see the apple logo then release. Or, restore as a new device in iTunes. What does and does not your phone do?

Can't open MMC - An attempt was made to reference a token that does not exist

I have a Windows 7 Pro, x64 - I'm trying to open the MMC and I get the error:
An attempt was made to reference a token that does not exist.
Ok, I open a cmd prompt (elevated), goto the \windows\system32 dir and run the command:
For /F %s in (‘dir /b *.dll’) do regsvr32 /s %s
And I just get "the system cannot find the file 'dir.
I have no idea what this means. Many others who have ran that command have had success (from looking at other forums). Just my luck - it doesn't work.
What do you think could be wrong here?

For /F %s in (‘dir /b *.dll’) do regsvr32 /s %s
And I just get "the system cannot find the file 'dir.
I have no idea what this means.
It means you have a bug in your script and because of the bug the script tried to look for a file named "dir".
So what's the /F for in the script?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

"attempt was made to reference a token that does not exist"

Hello expert
when ever i run my ard .I got this error
"attempt was made to reference a token that does not exist"
and after that
"Incorrect string for add-on"
this my code for connecting the addon to sap b1 and i am putting code of addon identifier string of solution type .i am not what is the problem
    Public Function GetApplication() As SAPbouiCOM.Application
        Try
            Dim objApp As SAPbouiCOM.Application
            Dim objSboGuiApi As New SAPbouiCOM.SboGuiApi
            Dim strConnectionString As String = Environment.GetCommandLineArgs.GetValue(1)
            '   Dim strConnectionString As String = Command()
            objSboGuiApi = New SAPbouiCOM.SboGuiApi
            'by vilas
            objSboGuiApi.AddonIdentifier = "500055230354241534953303030303030373937303A46303535303435343033390FC9CB682961A45865F5346418639642BBAC26F3"
            objSboGuiApi.Connect(strConnectionString)
            objApp = objSboGuiApi.GetApplication()
            Return objApp
        Catch ex As Exception
            MessageBox.Show(ex.Message)
        End Try
    End Function

This is a .NET error, a Google search for it turns up a lot of results so I would pursue that as it does not seem to be a B1 specific error. In many cases it seems related to ASP.NET, but not all so I suggest searching for
"attempt was made to reference a token that does not exist" -ASP

An Attempt was made to reference a token that does not exist - SAPB1 8.8

Dear All,
System throws an error message as "An Attempt was made to reference a token that does not exist" while connecting Add-on in Client system in SAP Business 8.8 version
Please do the needful
Thanks & Regards
Venkatesh N

Hi Venkatesh N,
Are you got any solution for this issue?
I also face a same problem with you. I got the a reply is "Reinstall the application".
But this is not the main solution for the problem.
If you got any solution, hope you can share with me.
Thank you.
regards,
Sheon

In mail how do I stop messages from the same sender from showing up when I select the most recent message from a sender?

on my iMac, when I view messages there is a grey number at the top of the message. This number denotes the amount of messages from that sender and when I view the most recent message in my mailbox (from that sender) all of the older messages load with it and this takes a while for the message to become moarked as "read." I know that I can turn this off because I have mountain lion on my air and i do not have this issue. how can i turn it off?
thanks

thanks so much, that fixed it! before I posted this quiestions I kept looking in the mail preferences but I dind't think to look on the View menu.

Can I restore an older backup than the most recent one from iCloud

My phone had to be reset and I want to restore my phone with an older backup than the most recent one. Is it possible to access older backups with iCloud?

Hi!
Just wondering, did you ever find a solution for this? I'm having the same problem and I can't find any information... Would yu please let me know if you do ?
Thank you

Can I import just the most recent photos from iPhoto

I want to import into the organizer just the most recent iPhoto ppictures. The problem is every time I want to import from iPhoto the system wants to import thousands of photos which I do not need. All I want are the last half-dozen or so shots that I took that's all.

There is the option to use iPhoto rather than Organizer with the PSE Editor application set up for external editing in the iPhoto preferences.
See the link below for further information and if using this option make sure you choose the application in Support Files (see image) and not an alias:
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-iphoto-mac-os.html

How do I change mail so only the most recent mail from a person opens?

When I open mail and go to a new mail all of the files/documents that, that person has ever sent me from previous days open as well. The other emails that I do not want also show up on the right side of my mail in the preview the document part. How do I change it so that I only see the email I am clicking on not a scrolling document of all of the mail items the sender has sent me. Also how do I change it so I only see the most recent item (the one I am clicking on) in the preview email on the right side? Thanks

In the View menu, uncheck (Expand All Conversations).

After the most recent update to 11.1, podcasts will no longer sync

After the most recent update to 11.1, my podcasts will no longer sync. I've clicking on the manual sync button, but nothing happens. Any suggestions for me?

I figured out the problem. You must click on settings under each Podcast and re-subscribe.

I have Firefox 3.6.13 Since the most recent update from Firefox I lost all my book marks and have not been able to place any pages in the book marks. I also do not seem to keep any History. Help!

I also notice when using a search from the tab on the far right say where Google is that I does not begin a search. When I use a secure email program the normal new window or tab that would open to type the message opens but remains blank. and will not load.
The server we are connected to crashed soon after I down loaded the new update for Mozilla Firefox. It has been replaced with a new one but I still have the above problems. I prefer to use only Firefox and would apreciate being to utilize the program as I did before. I am not happy with the problem with the new update. Or at least that is how it seems to me.

# Quit Firefox.
# Create a backup copy of your profile folder in a safe location.
#* [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]]
# Uninstall Firefox and delete your Firefox profile folder as well (NOT the backup copy you created earlier).
#* [[Uninstall Firefox from your computer]]
# From the following page download and install Firefox 16, which is the last version that runs on Mac OS X 10.5.
#* [[Firefox no longer works with Mac OS X 10.5]]
# Import your bookmarks from the automated backups found in the backup copy of your profile folder. They're in the /bookmarkbackups subfolder.
#*[[Restore bookmarks from backup or move them to another computer]]
Note that both your operating system and browser expose your system to security vulnerabilities because they're outdated.
* https://www.mozilla.org/security/known-vulnerabilities/firefox.html

Is it possible to import a Fixed Text file that does not have a header?

I'm trying to import a Fixed Text file through Import Manager, but the text file I am receiving does not have a header on it (the first row is valid data). When I try importing this, Import Manager uses the first row of data as the headings. Is there any way to turn this off and tell Import Manager there is no header data in the file?
Thanks!

Hi Ryan ,ur requirement can be met only when u import the file as ODBC .for this follow the below steps.
1)Go to control panel,in ur settings,select administrative tools
2) In that select DATA SOURCE(ODBC ).
3)Go to SYSTEM DSN tab select tab .
4)Select ur file type MICROSOFT TEST DRIVER (.txt,.csv)
5)Double click on "Import DSN" and in the blank give the name of DATA SOURCE NAME any name u want to give.
6)Uncheck the use current directory box and select the directory ur file is it will automatically show ur source file select it and click ok.
7) Now when u import ur file as ODBC give the name of ur DATA source name which u have given and it will show ur file in the source preview itself .
In this way u can import ur file as ODBC.
Hope this may help u.
Regards
Ankit

TS1347 Since the most recent download from Apple my calendar will not accept a new entry. I turned the phone off, back on, and it would then accept a new entry. Then would stop again. Attempted the on-off fix and now that does not work.

Similar Messages

Maybe you are looking for