TS1362 some songs quit in the middle of the track even though there is time showing. It goes right to the next song.
Songs quit in the middle of the track even though there is time showing. It goes right to the next song. Can I fix this or recover the full song?
I just found out how to solve the problem today
Go to the original location of the song. Meaning, if the song file is on the desktop then go there and individually click the songs and they'll play on Itunes perfectly fine
I'm not sure why this happened but I hope that works for you!
Similar Messages
-
My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?
As Peter says above, only an Apple Store genius can advise you.
But to further clarify, you seem to postulate that if Apple helps you, the cure would be a replacement. That is not necessarily true. Let them look at it and advise you what the remedy is. They may offer you nothing (saying it's your fault), or they may offer you a solution (keeping your current iPhone), or possibly a replacement. -
I was using my Macbook when it suddently shut down, I was updating the operating system so I had the charger on even though there was still 90 percent of energy. I tried to turn my Mac several times but it doesn`t turn on, also the green light of the charger is not working, it`s looks like the charger is dead too. What`s wrong with my Mac?
Try resetting the SMC.
MacBook and MacBook Pro with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer
To reset the SMC on newer Mac portables with a battery you cannot remove
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
I am trying to launch Firefox 9.0.1 on Windows 7 but it isnt working. I try to launch it and the application window does not show. When I look at the task manager and then look at the Applications tab, Firefox isnt listed. If I go to the Processes tab, there is a firefox.exe*32 process listed. Each time I double click the Firefox icon, a new firefox.exe process is spawned but there is never a visible instance of the Firefox application.
There are no errors in the application logs. I end up just having to kill the processes.
I tried launching in safe mode by holding down the shift button but the same thing happens.
Any suggestions on what to try? It has never worked since upgrading from version 8. I tried un-installing and re-installingI went through everything mentioned in the link you posed and nothing detailed there resolved the problem.
The Profile folder didnt exist so I created it. Made sure the perms were good and that it was not read only.
There are no default folders appearing under the profile folder when I start Firefox.
I have Firefox installed to my E drive.
Nothing happens. The process appears in the task manager but no application shows up.
Cant start it in safe mode, cant run the profile manager. -
I am looking for only column compare for making my target table same as source table.
My query:
select case when column_name_s is null and column_name_t is not null
then 'alter table GRADE_CONVERSION drop ' || column_name_t || ';'
when column_name_s is not null and column_name_t is null
then 'alter table GRADE_CONVERSION add ' || column_name_s || ' ' || data_type_s ||';'
else 'alter table GRADE_CONVERSION modify ' || column_name_t || ' ' || data_type_t ||';'
end alterations
from (select s.column_name column_name_s,t.column_name column_name_t,
s.data_type data_type_s,t.data_type data_type_t
from (select column_id,column_name,data_type
from all_tab_cols@database
where owner = 'erhan'
and table_name = 'GRADE_CONVERSION'
) s
full outer join
(select column_id,column_name,data_type
from all_tab_cols@database
where owner = 'sarigul'
and table_name = 'GRADE_CONVERSION'
) t
on s.column_name = t.column_name
Tables:
Target table: GRADE_CONVERSION table in sarigul@database
LETTER_GRADE
VARCHAR2(2)
GRADE_POINT
NUMBER(3,2)
MAX_GRADE
NUMBER(3)
MIN_GRADE
NUMBER(3)
Source table: GRADE_CONVERSION table in erhan@database
LETTER_GRADE
VARCHAR2(2)
GRADE_POINT
NUMBER(3,2)
MAX_GRADE
NUMBER(3)
MIN_GRADE
NUMBER(3)
CREATED_BY
VARCHAR2(30)
CREATED_DATE
DATE
MODIFIED_BY
VARCHAR2(30)
MODIFIED_DATE
DATE
want to see the result similar to this *(please ignore the column names here this is just a plain exemple:)
Alter table Target_table modify BOOK_ID Varchar2 (4);
Alter table Target_table add ISBN_10 Varchar2(13), null;
Alter table Target_table drop TITLE;I am looking for only column compare for making my target table same as source table.
My query:
select case when column_name_s is null and column_name_t is not null
then 'alter table GRADE_CONVERSION drop ' || column_name_t || ';'
when column_name_s is not null and column_name_t is null
then 'alter table GRADE_CONVERSION add ' || column_name_s || ' ' || data_type_s ||';'
else 'alter table GRADE_CONVERSION modify ' || column_name_t || ' ' || data_type_t ||';'
end alterations
from (select s.column_name column_name_s,t.column_name column_name_t,
s.data_type data_type_s,t.data_type data_type_t
from (select column_id,column_name,data_type
from all_tab_cols@database
where owner = 'erhan'
and table_name = 'GRADE_CONVERSION'
) s
full outer join
(select column_id,column_name,data_type
from all_tab_cols@database
where owner = 'sarigul'
and table_name = 'GRADE_CONVERSION'
) t
on s.column_name = t.column_name
Tables:
Target table: GRADE_CONVERSION table in sarigul@database
LETTER_GRADE
VARCHAR2(2)
GRADE_POINT
NUMBER(3,2)
MAX_GRADE
NUMBER(3)
MIN_GRADE
NUMBER(3)
Source table: GRADE_CONVERSION table in erhan@database
LETTER_GRADE
VARCHAR2(2)
GRADE_POINT
NUMBER(3,2)
MAX_GRADE
NUMBER(3)
MIN_GRADE
NUMBER(3)
CREATED_BY
VARCHAR2(30)
CREATED_DATE
DATE
MODIFIED_BY
VARCHAR2(30)
MODIFIED_DATE
DATE
want to see the result similar to this *(please ignore the column names here this is just a plain exemple:)
Alter table Target_table modify BOOK_ID Varchar2 (4);
Alter table Target_table add ISBN_10 Varchar2(13), null;
Alter table Target_table drop TITLE; -
IT help said the installer was corrupted. Back I go to see if I can download it again and get a clean version.
Banjo Seth if you are receiving messages that you have insufficient file permissions then please have your I.T. department attempt the install utilizing a local administrator account.
-
I am running Elements 10 on Yosemite 10.0.1 and it crashes in the middle of every project. Is there a work around?
Did you delete the preferences on upgrading to 10.10? If not:
A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog -
After updating my iPad to IOS 8.1.2, I am unable to access the Cloud with my password, even though it worked on my Macmini. I changed the password and it still does not work on the iPad. What can I do to get iPad to recognize my Apple ID/password account?
I would be helpful to know what those "basic steps" you have already tried are, but lacking that information:
Settings app > iTunes & App Stores - sign out of your AppleID
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
Sign back into your AppleID (same location as noted above) -
when i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.when i click start it says the apple mobile device services stopped in the middle then stopped.it said some services stop in the middle if not used by other services.and i just updated itunes before all a this and ever since ive had errors.
Have you looked at this article:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
In the middle of a text conversation between another iOS 5.0 iPhone user and myself, the conversation elements switched back and forth several times between Text and iMessage. The phone actually tracked it and put little lines indicating the switch, and my comments changed from green to blue and back again. I can't think of anything I changed in the middle of the conversation. I was outside WiFi range, using the Cell network at the time. Now I tried it again, while i'm on WiFI and the messages are Text (green) again.
1. Windows 8.1 Enterprise w Update is the best. It allows you for sideloading in corporate environment without additional tools and licenses.
http://technet.microsoft.com/en-us/windows/jj874388.aspx
2. N series is for EU (without IE).
3. Profesional is fine, but you will need some tools to achieve the same functionality that you have in "pack" Enterprise.
4. VL is volume license, a type of license for multiple computers (to say it simply)
5. MSDN forum is better alternative for problems like this.
6. Attached to MSDN are licenses or at least references to web resources. Read license agreements carefully and let your installation and use follow the license.
Rgds
Milos -
New iPod Nano Turns off in the middle of any track playing - Apple Bummer
So, I just received my iPod Nano as a replacement to an early generation of iPod Nano's that are subject to recall. The new Nano has been updated as of 21 Jan 2012. Songs loaded into iTunes under MAC OS X Lion, iPod Nano synched with my computer, and I'm ready to go.
What - not so fast! Guess what? The Nano turns itself off in the middle of any track you play. I turned the shake and shuffle mode off to make sure that is not it. And it is fully charged. I even went through the reset procedures.
So its less than 24 hours new/old so I go for Apple support. My original iTunes etc accounts are associated with my house in America. But I live in the UK right now. So drill through Apple support and guess what? Well, I live in London so no support is available. And the Apple web site as usual does not provide much help in making calls.
Apple's web site says there is no coverage on this as it is out of warranty? 24 hours new? No warranty. It says it comes with a one year warranty. And Apple UPS'd it to me yesterday.
So question 1 is: Does anybody know what the problem is and how to fix it? I hope it isn't operator head space but who knows, maybe it is.
And question 2: Does anybody have a good 800 number for me to call in the USA?
Many thanks.Livin Doll wrote:
I have the same problem and wondered if it was loosey goosey headphones which were just cheap 10 dollars buds. So are you saying I should get new ear phones that fit tighter?
That would be my guess....Here is what Apple has to say about the problem.
http://support.apple.com/kb/ts3700
My guess is that it is a compatibility problem with older or aftermarket ear buds. My daughter has a 6th generation Nano and does not have this problem but keep in mind she is using the ear buds that came with the 6th Generation Nano. With the replacement program they are not sending new ear buds. I just did a test with my daughters 6th Generation Nano using an old set of aftermarket ear buds I had in my desk and I was able to duplicate your issue. I then used the ear buds from my Iphone 4s and did not have an issue with the Nano going to sleep and the music turning off. -
When listening to songs on my itunes acct (without ipod attached), I can only play one song at a time. It doesn't automatically play next song on list. It happens with all playlists. It only started happening when I downloaded the latest itunes update.
Are all songs checked in your playlist?
-
i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can anyone please help?
I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music -
i have a new email so have a new apple ID now and am trying to change it in icloud. but it has locked me out and won't send my email a reset password link for some reason. even though it says its sent, it doesnt come to the email address. help!
Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18 -
I am unable to access my mail account on my iphone, which I have been able to do previously. I press the mail icon, the page refreshes to the mail format page - blue bar top and bottom, white text space in the middle.... and that is as far as it goes. It does not list my email accounts or offer any.
Close the mail app, double tap the home button and completely close out of the app.
then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Maybe you are looking for
-
Program is not sending emails if I run it within the process chain
Hi All, I am facing a weird issue; I have an ABAP program which compares tables and sends the results in an email. It is working fine if I run it standalone. However, if I run it within the process chain it still runs but doesn't send the email. Any
-
Exporting Indesign document into PDF
I have a worklow of 410 pages 13"x13" made entirely of photos. The work is in progress but I want to make a presentation of what has been done so far. I opted for exporting to PDF only screen and web visible and that worked fine. But when I tried to
-
Tcode j1ia101 for ARE1 internal document in background
Hi gurus, Can any body tell me BAPI or any FM to run tcode j1ia101 in background. regards manas
-
Apple store,just wanted to check on how to change my area settings in itunes from United States to United Arab Emirates(that's where i stay).it got changed when i tried to download google maps from the US store in itunes.please help me out here.Thank
-
HT1694 how can i add the contact list from my msn account
I need help entering my contact list