TS1559 My iPhone 3GS will not now join wifi. This is a very recent problem and I have tried everything so hope someone can help. I go Settings then Wifii, it picks up network no problem but then does not download IP Address.
My IPhone 3GS will not now join wifi, this is a very recent problem. It finds my network but does not download the IP Address hence when I load password Join remains grey. I have tried all the fixes suggested I.e. network reset, airplane on then off but still nothing. I also have another iPhone of the same type and an iPad and they are just fine so I know it is not a router problem. Please please what do I do?
Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
Similar Messages
-
I am using Photoshop CS5 on a new iMac with a wireless keyboard. I used to be able to hit F11 to perform a custom sharpening action but now the F11 key is the volume control key and I have tried everything to disable or switch the volume key. I have also tried assigning other function keys to initiate the action. Is there a simple solution to this? What am I missing?
Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.
-
I have an iPhone 5c version 7.1.2. When trying to allow the upgrade for the "iOS 8.1.3 , everything appeared to be upgrading except for the wifi. my Wifi stays turned off now and will not come on. In my Setting applications , general it states I need to do the "iOS 8.1.3 upgrade but will not allow me to continue because I do not have Wifi. I have googled this issue and tried some of the options on there, I do apologize. I can not remember specific right now what the few were. I have MS and some cognitive issues. This is very frustrating at this point , I am also having the same issue with my iPad 2. Any help is appreciated
Connect the devices to the computer and iTunes, update from there. Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
-
Imessage is not working! and i have tried everything! hasnt been working for like 2 mOnths nOw\
I have a iphone 4 and this summer my imessage stopped working and i have tried everything to fix it! Also my youtube app and my notifications are not working! ah someone please help!
Hi Gray Gray
lets try to break this down into a couple different steps here. Will start with Imessages first.
1. We need to make sure that we are currently connected to your cellular network or wifi. if you are not connected to wifi or 3g imessages will not send.
2 lets reset current network - simple as turning on airplane mode and turning it back off after 30 seconds.
settings > first option
3 Now lets check imessage go to settings > Messages
confirm imessage is turned on. If it is turned on turn it off for 30 seconds then turn it back on
4 Test it out
now attempt to send it to a friend with an iphone (on IOS5) and see if its working now
Is the Imessage issue resolved? -
I have a PC. I would like to sync my iPad2 via itunes. My computer recognizes my ipad but itunes does not. I have uninstalled itunes, shut down the computer and restarted plus reinstalled itunes. I visited the Apple store there is no problem with the iPad or the cord. I still have the same problem and am unable to sync when I plug in the iPad via the USB cord. Does anyone have further suggestions?
Try going into the control panel, add/remove programs. Uninstall iTUnes, Apple mobile device service, apple application support. Then redownload and reinstall iTunes and see if it'll work
If the computer sees your iPad you know the cable and connection is good, so the issue has to be software. -
I found an iphone 4 and i reset it everything went good. It told me to connect to itunes so i did (via windows 8) but it could not recognize it. Please help
I hope if I ever lose my phone that you find it snozdop and not ajackson15. Maybe ajackson15 will lose something of his/hers and then not get it back
-
i tried speeding up the beats per minute on of a few song on i-tunes following your instruction but it does not work. is there anything else that i should do?
You need to edit the audio file of the song to speed a song up. If you have GarageBand '11 on your mac, try this:
SPEDING UP SONGS -
I have a ipod 5th gen and i changed my password because everyone knew it. I had forgotten it and now it is fully disabled. I can not get it online anymore and i have tried everything to get it restored. Please help as I am really worried
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I have a non intel G5 and would like to download i-tune songs that I have recently purchased. I have tried everything and can't find the downloads. Did this G5 just become obsolete with itunes? If not what is the problem?
You can do it with Leopard but it depends upon the iTunes version which you did not reveal. Also make sure you are looking in the right place for purchases.
Consider buying a backup drive so you do not need to do this again. If you are going to run old hardware and software you need to live differently because yes, at some time you will find your version of iTunes no longer works. You're lucky it still works with Leopard. As you can see, some versions still work with the iTunes Store but not for repeat downloading.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud, iTunes Match, and iTunes Radio availability by country - http://support.apple.com/kb/HT5085); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple recommends, "... back up your iTunes library. " (http://support.apple.com/kb/ht2519).
Additional tip at https://discussions.apple.com/message/24176756#24176756
Select the iTunes Store on the left side of iTunes if you have the sidebar displayed, or with the button at the top right.
Click on Purchased on the right side under Quick Links (see https://discussions.apple.com/message/26364186#26364186)
You can re-download your available previous purchases. -
Hope someone can help - Lightroom not working...at all...nothing....
I have tried installing about 20 or so times now and still cant get any thing at all when i launch the application - its likek it freezes. Something somewhere is missing or corrupt in my mac or the dowmload i downloaded and here's really hoping someone can help.
I have been using the beta since beta 1. This morning i downloaded the V1.0 and went through the usual steps on a mac. Launched the programme and got the option screen of entering a code or trying for free for 30 days.
Chose the free trial as my serial code had not yet been sent.
The application seemed to start and then said it was going to upgrade/update (or similar) my old library and this may take a few minutes. Fine - I've got all day - no worries.
5 hours later and not a whole lot appears to have happened other than Lightroom being frozen and I cant do much. Force quit ensues and an attempt to relaunch the application.
It launches and I getthe start up Window that lists all teh people who made it...but my cursor just goes into spinning ball mode an dnothing happens. This has now gone on about 20 or so times. I have tried removing the Lightroom with Appzapper and then re-installing the original beta followed by the new download....still nothing but a frozen lightroom
Anyone got any ideas - it must be something to do with my mac as everyone else seems to be using lightroom ok... and i'm desperate...seeing as i've been using it since beta 1
hope someone can help??Another thing to check is the permission settings on the Lightroom application and on the folder where your library lives (or will live, if you're making a new one.)
The Lightroom application needs to have an owner who has read/write permission on the library folder's location. Normally this owner will either be your own user ID or the "system" ID -- check by doing a command-i and seeing what shows up under the 'Details' section of the 'Ownership and Permissions' section.
I was having exactly the same problem you described until I checked and discovered that for some reason, Adobe's Installer had installed Lightroom with a strange owner ID that only had read permission on my library folder's location. Since Lightroom needs to be able to both read and write to the library when it starts up, it was launching and then just sitting there doing nothing.
I changed Lightroom's owner to 'system,' then made sure that the 'admin' group (of which 'system' is a member) had read/write permission on my library folder's location. After that, Lightroom launched fine. -
Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.
I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta. -
HELP..... i am not sure how to remove my sync albums from my iphone4 i have tried everything can someone help me please thanks
Go on to iTunes, and uncheck the albums you want removed. When the phone re-synces, they will be off.
-
Can I have 2 accounts on my iPhone. I have 2 on my computer and have a signal that 1 email is in my inbox. It is an iCloud message but I can't access it. Hope someone can help. Thanks, Lorna
You can only have one active iCloud account and one iTunes account. Are you by chance refering to email accounts defined in the mail app? If so, if one of the accounts (a non-iCloud account) is a POP account, then an email is usually sent to one device. Once sent, the email is deleted from the server, thus other devices never get copies. That's how POP works.
-
I cannot connect to itunes store but my network connections are fine and I have tried everything on the itunes support site. I just want to authorize my computer. Can anyone help?
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I am trying to home share with my new MacBook. The music library I am wishing to share is not displaying anywhere on my new laptop under music or library. My computer is authorized and I have tried restarting itunes, etc. Any help/ideas?
Are you using the same ID for homesharing on all devices.
By the way shared libraries don't show up under either 'Music' or 'Libraries'.
Maybe you are looking for
-
Issue while installing WCS using omii.ini: Database ping failed
Hi, I am trying to install WCS on local linux VM. I am following the document 'Oracle WebCenter Sites: Installing on Oracle WebLogic Application Server". Following are the things I have been able to do successfully: Install Oracle DB, create a databa
-
Hi All, I have created a smartform and when i try to print it prints in Landscape format, but the form Output has 'Portrait' format and uses DINA4 page format. I have verified my default printer settings and has a page format as 'Letter' , I have cha
-
The company I work for recently switched over to using PDFs for a 2D drawing achiving format. With that said, we are considering also storing a 3D PDF with the CAD data to send to customers as well. We use Reader 9.4.1 for viewing and Pro/E Wildfire
-
Qmaster cluster batch results in random -2048
I used to notice this back in the day with 24bit audio exports... it's been since fixed, although now it's returned in a far more brutal way I have 3 machines on a qmaster cluster... an xserve, and two g5 towers. The xserve works as the controller. I
-
I decided to install Linux (PC Linux OS) along side Mac OS X because... I wanted to. I booted my mac mini into a PCLOS live CD and installed it on an external firewire drive. When it was done installing it said something about doing something to a bo